|
| 1 | Dismantling tiledroofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 3 | Dismantling of old WC pans. |
| 4 | Repairs to plaster in patches of 2.5 sq.m. and under including cuttingthe patch in proper shape and preparingand plastering the surface of the walls complete including disposal of rubbish to the dumpingground within 50m lead. |
| 5 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 6 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 7 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 8 | Dismantlingdoors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead |
| 9 | a) Of area 3 sq.m. and below |
| 10 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid,C.P. brass hingesand rubber buffers 10 lts. Highlevel P.V.C..flushing cistern (of approved make ) with fittings, rack bolts 32 mmdiameter P.V.C.telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe withspecials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. |
| 11 | a) W.C. pan with white plastic seat and lid. |
| 12 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mmsand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe withspecials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. |
| 13 | b) Orissa pattern W.C. pan |
| 14 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. |
| 15 | f) Angle back was basin size 600 x 480 mm with single 15 mm C.P. brass pillar taps. |
| 16 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 17 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws |
| 18 | a) 750 x 20 mm size |
| 19 | Providing and fixing rigid PVC S.W.W. (soil, waste & rain water) drainage pipes ofapproved including lubricant etc. complete (single/double) socketed: |
| 20 | a) 110 mm dia |
| 21 | b) 75 mm dia |
| 22 | Providing and fixing rigid PVCbend of required degree (of approved make) for S.W.R. drainage pipes ofapproved including lubricating. |
| 23 | a) 110 mm dia |
| 24 | b) 75 mm dia |
| 25 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarsesand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
| 26 | d) Inside size 60 x 60cmand 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 27 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. |
| 28 | b) 20 mm dia nominal outer dia pipes. |
| 29 | c) 25 mm dia nominal outer dia pipes. |
| 30 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 31 | a) 15mm nominal bore |
| 32 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance20mm Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 33 | a) 20mm nominal bore |
| 34 | Providing and fixing brass full way valve(heavy) duty with wheelof approved quality : |
| 35 | b) 20 mm nominal bore |
| 36 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming toI S 12701; 1996. |
| 37 | c) 1000 lit. capacity |
| 38 | Providing and fixing ballvalve(brass)ofapproved quality : |
| 39 | a) High pressure with P.V.C. floats: |
| 40 | 2) 20 mm nominal bore |
| 41 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria(thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 42 | a) Dark Shades |
| 43 | Providing and fixing coloured ceramic tiles (Bell or equivalent) of 8\" x 12\" size and 6 mm thick in skirtingand dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 44 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section(SHS)IS4923/RectangularHollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (MinYeildStress310Mpa))trussesetc., including cutting, hoisting, fixing in position and applyingaprimingcoatofapprovedsteel primer,includingweldingandboltedwith special shaped washers etc. complete. |
| 45 | b) Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mmwith cover width of 1020mmincluding all the accessories(JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 46 | c) Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 47 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 48 | Removing old loose bottom or side cover of RCC slab, beam, columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost oftransport etc. as per dir of EIC.All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 49 | Removing of old damaged/ dilapidated grills, cutting, altering the size & welding additional members as per required sizes of flats/sq. Bars etc. & applying priming coat & painting & refixing the same. |
| 50 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. |
| 51 | c) Figured glass |
| 52 | Extra For powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 53 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 54 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 55 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 56 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 57 | Painting one ormore coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. |
| 58 | Melamine polishing on wood work (one or more coat) |
| 59 | a) Glossy |
