Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debreis within 50 M lead. |
| 2 | Dismantling and removing doors, windows & ventilators including removal of frame, hinges fastening and stacking the same for reuse and removing the debries within 50 M lead. |
| 3 | Dismantling G.C.I. Or A.C. sheet roofing after carefully removing the bolts and nuts including stacking the materials for re-use and removing the debris within 50 M leadincludingcost of all materials, labour, conveyance,cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 4 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debreis within 50 M lead. |
| 5 | Earth work in excavation in foundation in all kinds of soil including dressing and leveling the bed and depositing the soil within initial lead of 50 M and initial lift of 1.5 M as may be directed and providing shoring and shuttering & struts if necessary complete. |
| 6 | Supplying, filling in foundation and plinth with sand well watered and rammed in 22.5cm 9\" layers with all leads and lifts cost, conveyance, labour, T&P etc. complete (measurement will be taken on finished compacted section only) |
| 7 | Cement concrete (1:3:6) by using 40mm size hard granite crusher broken| chips of approved quality and from approved quarry including lowering aying concrete, w atering and curing etc. complete for required levels laid| in layers including cost and conveyance, royalty & taxes of all materials| and cost of all labour T&P required for the work, labour welfare cess 1% etc. complete as per direction of the Engineer-in-charge. |
| 8 | Cement concrete (1:2:4) with 12mm size black hard granite crusher broken chips of approved quality from approved quarry including cost, conveyance, royalties & taxes of all materials, labour, T&P etc. complete. |
| 9 | Providing Fly Ash brick masonry work in F&P using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:4 (1 cement : 4 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., completeas per the direction of the Engineer-in-charge. |
| 10 | Fly ash brick masonary in cement mortar (1:6) in superstructure in Ground floor using Fly ash bricks of 25 x 12 x 8cm size having a crushing stength of not less than 75 Kg / Sqm with dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projetions watering and curing after immersing the bricvks in water at least for six hours before use including cost, conveyance, royalties and txes of all materials with all labour, labour cess and T&P required for the work complete in all respect |as per specification & direction of Engineer-in-charge |
| 11 | Providing lifting , hoisting and laying reinforced cement concrete of M 20 grade(using branded cement) to the following structural member or in places as shown in the drawing for all floors with 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth (if required by grouting / providing plaster with cement mortar 1:4 wherever necesary without any extra cost) scaffolding, including watering and curing for the required period including providing strong, rigid, levelled and plumbed centring and shuttering to required shape and size, for floors with steel centring materials, with all necessary bracing and ties and supports pockets for electrical conduits, pipes, PH pipes, for hooks or boxes, switchboards and insert plates, clamps and extension bars, etc, including dismantling the same after the required interval from the date of casting, includingcost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering,curing, sundries. tools and plants etc. complete as per direction of the engineer-in-charge, but excluding cost of steel reinforcement. |
| 12 | R.C.C Column Base Foundation |
| 13 | R.C.C Column |
| 14 | R.C.C. Plinth Beam |
| 15 | R.C.C. Beam |
| 16 | Supplying Cutting, straightening tor steel of primary steel / HYSD bars producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) & of approved grade etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights) complete as per specification & direction of Engineer-in-charge. |
| 17 | Supplying, fitting and fixing vertified tile in floors of size 600mm x 600mm ( Coloured or Printed ) of approved make with application of polymer modified quick set cement based water resistant adhesive of 3mm thick bedand filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work. |
| 18 | Supplying, fitting and fixing in position32 mm thick ofBWRgrade blockboardflush doorwith teakwoodbeading and1 mm thick sunmicato both sidepastedwith adhessiveincluding fixingoffixtures likeGodrej makeMortice Lockhaving modelno 9168 ,Godrejmake door closerhaving model no8340 .100 mm Aluminium hinges , handle, tower boltstopperincluding cost ofall materials, labourall taxes, transportation, loading&unloadingetc . complete .as per specificationand directionof Engineer- in - charge |
| 19 | Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window - 60 - Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and Window Sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete. |
| 20 | 12mm. Thick cement plaster (1:3) for Ceilling Plasterincluding watering curingwithalLabour T& P etc complete .in all floors. |
| 21 | 16mm. Thick cement plaster (1:6) over brick works in all floors. including watering curingwithalLabour T& P etc complete .in all floors. |
| 22 | Priming one coat to wall surface with any approved primer including cost, conveyance, taxes of all materials, labour, T&P required for the work including cost of paint complete in all respect.. |
| 23 | Priming one coat to iron surface with any approved primer including cost, conveyance, taxes of all materials, labour, T&P required for the work including cost of paint complete in all respect.. |
| 24 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour T&P etc. complete. |
| 25 | Distempering two coats with approved shade (Burger make) to thewall surface of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with,cost of all materials,cess, labour, conveyance,royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge. |
| 26 | Providing and applying painting over the plastered surfaces with 2 coats of Weather coat(I.S.I)of approved quality and shade, using the required quantity of Weather coat(I.S.I) as specified by the manufacturerto give an even shade includingcost of all materials, labour, conveyance,cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 27 | Laboour for fixing G.C.I. sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fittings. |
| 28 | Supplying, fitting and fixing of M.S. grill / grill gates made out of M.S. angle and M.S. flat with ornamental design and hold fast attachment with all cost, conveyance, labour etc. complete as directed by the Engineer-in-charge. |
| 29 | Supplying, fitting and fixing of M.S. angle iron of size 40 x 40 x 5mm thick of approved quality including cost, conveyance, taxes of all materials, labour T&P etc. complete. |
| 30 | Painting two coats to oldwood / iron work in any approved shade including cost, conveyance, taxes of all materials, labour T&P required for the work including cost of paint complete in all respec |
| 31 | 2.5cm. (1\") thick grading concrete (1:2:2) on roof slab with 6mm and down grade hard granite chips for old work including cost, conveyance, royalties and taxes of all materials, labour, T&P watering, curing etc. complete. |
| 32 | Supplying, fitting & fixing of cement concrete colouredhexagonal paver interlocking blocks, 80mm thick and 250mm inscribed circle diameter (0.382 Sqft area) machine mixed and compacted having crushing strength not less than M-15 including cost of all material, coat of all labour, T&P, Costof all taxses and transportation etc. complete. |
| 33 | P.H. |
| 34 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes, confirming to ASTM - D - 1785 . 89 (sch 80) and pipe fitting of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 35 | Ground floor |
| 36 | 20mm dia PVC Pipe |
| 37 | 25mm dia PVC Pipe |
| 38 | 32mm dia PVC Pipe |
| 39 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 40 | 15mm dia CP angle stop cock (Jaquar) |
| 41 | 15mm dia CPbib cock (Jaquar) |
| 42 | 25mm dia brassfull way valve (Jaquar) |
| 43 | 125mm CP grating |
| 44 | 15mm CP Extension piece |
| 45 | 15mm size C.P. flange |
| 46 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 47 | 1000 liters capacityPVC water storage tank (sintex) |
| 48 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 49 | Ground floor |
| 50 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 51 | Ground floor |
| 52 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 53 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 54 | 110mm U-PVC‘P’ Trap (Ori Plast/Finolex/Supreme Make) |
| 55 | 110mm U-PVC door bend (Ori Plast/Finolex/Supreme Make) |
| 56 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) |
| 57 | 110mm U-PVC offset without ear (Ori Plast / Finolex / Supreme Make) |
| 58 | 110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make) |
| 59 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 60 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 61 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. |
| 62 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 63 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal. |
| 64 | Stall urinal |
| 65 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 66 | 550mmx400mm W.H.basin (Hindware / Parryware / Neycer make)with 15mm dia C.P.pillar cock (Plaza make). |
| 67 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 68 | 600mmx450mm size B.E mirror (swivelled type) |
| 69 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 70 | CP soap holder |
| 71 | Supplying all materials, labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 72 | Supplying all materials, labour, T&P and constructing Inspection Chamber ofinside size 760mm x 760mm x 460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 73 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 74 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge) |
| 75 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster (1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 76 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 77 | Providing fitting and fixing of Aluminium door with anodized AL. door section of 9202 as vertical member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No.1855 Including all cost of Laboure .T&P hire charges of driling machine laboure charges etc . complete.Ref: OBI10 |
| 78 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge |
| 79 | Aqua guard pure Chill 120 PSS UV |
| 80 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 81 | 110mm dia P.V.C. pipe |
| 82 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 83 | MH size 0.91m x 0.91x0.91 m with 0.45 m (18” dia RCC Cover) |
| 84 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 85 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 86 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 87 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 88 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 89 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 90 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 91 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 92 | RCC floor, roof slab chhaja up to 4.430 m height |
| 93 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar (1:3) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 94 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster (1:3) on brick work including watering, curing, cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 95 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 96 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC (1:2:4) for fixing etc. complete as per PH specification. |
| 97 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 98 | E.I. |
| 99 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V modular type switch ISI marked and ceiling rose ISI marked mounted on Modular G.Ibox having modular base &cover of suitable size, MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) |
| 100 | Group-A-L.P- F.P- C.B.P- |
| 101 | Group-B L.P- F.P- C.B.P- |
| 102 | Group-CL.P- F.P- C.B.P- |
| 103 | Supplying and fixing of following sizes of Modular G.I boxes in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 104 | 2 Module |
| 105 | 4 Module |
| 106 | 6 Module |
| 107 | 8 Module |
| 108 | 12Module |
| 109 | Supplying and fixing of following modular type switch/socket on the existing switch box/cover including connection etc. as required |
| 110 | 5 / 6 Amp switch |
| 111 | 3 pin 5 / 6 Amp socket outlet |
| 112 | 15 A switch |
| 113 | 15 A socket |
| 114 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/Great White/Mescab/HPL) |
| 115 | 2 x 1.5 sq.mm + 1 x 1.5sq.mm |
| 116 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 117 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 118 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 119 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 120 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 121 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) |
| 122 | 12WAY, SINGLE DOOR |
| 123 | 8WAY, SINGLE DOOR |
| 124 | 4WAY, SINGLE DOOR |
| 125 | Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-HPL/ Havells/ Legrand /L&T/C&S) |
| 126 | Single pole (SP) |
| 127 | 1\" X 20wattLED T-5fitting( Make-Bajaj/ Philips /Crompton) |
| 128 | 50 Watt Ceiling Fan 48\" 5 star rated |
| 129 | Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj) |
| 130 | Electronics step type |
| 131 | 300 mm sweep Exhaust fan 900rpm |
| 132 | S/F of computer board consistng of 3 nos 5A and 1 no. 5A switch and socket. |
| 133 | 90 Watt LED Street Light |
| 134 | Analysis of AC and Gyeser Point(AC -5nos,Gyeser - 1Nos) |
| 135 | Supply and making end termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cableas required. |
| 136 | 3 1/2 X 50sqmm |
| 137 | 3 1/2 X 50 MM2 Aluminium armoured cable(RR/Mescab/KEI) |
| 138 | Installation, Testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. |
| 139 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 mmsq but not exceeding 120 mmsq on surface as required |
| 140 | S/F of Panel board 200 A TPN Main switch - 1 no.,f200A TPN Bus-bar- 350 X 32 X 6 mm size - 1 no.(Anchor/HPL/L&T) |
| 141 | S/F of 6 kg ABC TYPE Fire extinguisher |
| 142 | LIGHTNING ARRESTER |
| 143 | S/F of Lightning conductor finial made of 25mm x 300mm long, copper tube,having single prong at top, with 85mm dia 3mm thick copper base plate including holes etc. complete as required. |
| 144 | Reveting, sweating and soldering of copper/G.I strip as required. |
| 145 | Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required(For horizontal run) |
| 146 | Providing and fixing of copper tape 25mm x 3mm on parapet or wall surface (vertical run) for lighting conducter complete as required |
| 147 | S/F of12WLED Bulb |
| 148 | S/F of Panel board 200 A TPN Main switch - 1 no.,f200A TPN Bus-bar- 350 X 32 X 6 mm size - 1 no.(Anchor/HPL/L&T) |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail