|
| 1 | Supplying, Installation, Testing and Commissioning of ELECTRIC MOTOR DRIVEN, Mono block pump set, central delivery type (with mechanical seal, bronze impeller & carbon steel EN-8 shaft), capable for a DISCHARGE of 900 L.P.M. at a HEAD of 35 MTRS., 7.5 HP, 2900 RPM, flexible coupling (i/c coupling guard) with totally enclosed, fan cooled squirrel cage, induction motor suitable for operation on three phase AC supply of 415 + 10% Volts, 50 Hz, fixing the coupled pump and motor on a common structural base frame, making a suitable cement concrete foundation and mounting the complete pump-motor set on the foundation using suitable numbers of anti vibration mountings as per the design / recommendations of the manufacturer. ( MAKE: KIRLOSKAR/ CROMPTON) |
| 2 | Supplying, fixing, testing and commissioning of following sizes of ISI marked heavy duty (\"C\" Class)IS: 1239 MS pipes including cutting, welding etc. and providing all fittings such as elbows,reducers, clamps, hangers, flanges, gaskets, nuts, bolts andwashers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick orRCC walls/slabs and making good the same etc. complete in all respect as required.( MAKE: TATA/ JINDAL/ PARKASH SURYA) |
| 3 | 100mm dia. |
| 4 | 80mm dia. |
| 5 | 50mm dia. |
| 6 | 25mm dia. |
| 7 | Supplying, Laying, Testing and Commissioning of following sizes ISI marked heavy duty (\"C\" Class) MS pipes including cutting, screwing, welding etc. andprovidingallfittings such as elbows, reducers, flanges, gaskets, nuts, bolts andwashers etc. including painting the pipes with two coats of coaltar and wrapping 2mm ( Pypkote IWL ) asphalt tape/tissue and laying the pipe upto a depth of one meter below ground level including excavating trenches and then refilling the soil in layers not exceeding 20 cms. in depth, consolidating each deposited layer by ramming, watering etc. complete as required. ( MAKE: TATA/ JINDAL/ PARKASH SURYA) |
| 8 | 100mm dia. |
| 9 | Supplying, Installation, Testing and Commissioning of Air cushion tank (Air vessel) 150mm dia. & 1200mm height having dished ends made of 6mm thick M.S.Pipe, and providing 25mm dia. ball type brass air release valve , suitable M.S.support and minor civil works etc. as required. (Make: FGE/Crownsales/MAC) |
| 10 | Supplying, Installation, Testing and Commissioning of ISI marked BUTTERFLY VALVESfollowing sizes tested for a minimum pressure of 16 Kg/cm² complete with rubber insertion,nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications. ( MAKE: MINIMAX/ CASTLE/ SANT/ LEADER/ ZOLOTO/LP ) |
| 11 | 100mm dia. |
| 12 | 80mm dia. |
| 13 | Supplying, Installation, Testing and Commissioning of Duel plate Non return valves of following sizes conforming to relevent IS specifications and testedfor a minimum pressure of 16 Kg/cm² for sheet and 24 Kg/cm² for shell including providing and fixing nuts, bolts, washers, gaskets etc. complete as required.( MAKE: KALPANA/KIRLOSKAR/ CROMPTON ) |
| 14 | 100mm dia |
| 15 | Providing and fixing of dial type S.S Pressure Gauge with isolation cock and pipecomplete as required. ( MAKE: H Guru/ FEBIC) |
| 16 | Dial diameter 100 mm calibration 0-16 Kg |
| 17 | Providing and fixing of Pressure switch complete as required. ( MAKE: H GURU/FEBIC) |
| 18 | Supplying, Installation, testing and commissioning of Single headed Gun matel/S.S, ISI marked oblique patternhydrantlanding valve Type \"A\"with 80mm dia flanged inlet & 63mm diainstanteous type femaleoutletcomplete with A.B.S. plastic cap andchain, twist release type lug and allaccessories as per IS: 5290-1983 complete as required.(MAKE: MINIMAX /SAFEX/FGE/LIFE GUARD) |
| 19 | Supplying, Installation, Testing and Commissioning ofinstantaneous fire brigade inlet connection conforming to relevantISammended upto date for tank/line consisting of63 mm Gun metal Quadra plate, male inlet coupling with plug & cap chain bendsand other accessories etc. completeas reqd.(MAKE: MINIMAX /SAFEX / FGE) |
| 20 | Two way |
| 21 | Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A,IS:636,63mm diax15m long withgunmetal/S.S male & female couplings (ISI marked) bound & riveted to hose pipes with G.I rivets and G.I wire as required.(MAKE: MINIMAX /SAFEX / FGE/LIFE GUARD) |
| 22 | Supplying, Installation, Testing and Commissioning Gun matel/S.S63mm dia. Short Branch Pipe (ISI marked) with 20mmdia nozzle as required.(MAKE: MINIMAX /SAFEX / FGE/LIFE GUARD) |
| 23 | Supplying, Installation, testing and commissioning of First-Aid-fire Hose reel wall mountingswinging type completewith drum, bracket, 30M long high pressure rubber hose reeltubing with IS:884, shutoff nozzleas required.(MAKE: MINIMAX /SAFEX / FGE/LIFE GUARD) |
| 24 | Supplying, Installation, Testing and Commissioningstandard FireMan\"saxe with heavy insulatedrubber conformingto IS : 926.(MAKE: MINIMAX/SAFEX / FGE/ NEWAGE) |
| 25 | Supplying, Installation, testing and commissioning of weather proof cabinet for hose fabricated out of 1.6 mm thickness M.S. sheet with front glass door having locking arrangement, suitable toaccommodateall the necessary pipes, accessories, fittings etc. including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc. (MAKE: FGE/ MAC/CROWN SALES) |
| 26 | Size - 900 mm wide x 600 mm high x 400 mm deep (For Yard Hydrant) |
| 27 | Size - 600 mm wide x 600 mm high x 300 mm deep (For Fire Brigade inlet connection). |
| 28 | Size - 750 mm wide x 600 mm high x 250 mm deep (For Fire Brigade inlet connection). |
| 29 | Providing and fixing of FIRE EXTINGUISHER, (4 Kg. Capacity) ABC Powder type complete with all accessories as per Manufactures Specification. ISI Mark(MAKE: MINIMAX/SAFEX/ FGE/LIFE GUARD) |
| 30 | Providing and fixing of FIRE EXTINGUISHER, CO2 4.5KGtype complete with all accessories as per Manufactures Specification. ISI Mark.(MAKE: MINIMAX/SAFEX/ FGE/LIFE GUARD) |
| 31 | Providing and fixing of FIRE EXTINGUISHER, WCO2/9 Ltr.type complete with all accessories as per Manufactures Specification. ISI Mark.(MAKE: MINIMAX/SAFEX/ FGE/LIFE GUARD) |
| 32 | Providing and fixing of FIRE EXTINGUISHER, AFFF/9 Ltr.type complete with all accessories as per Manufactures Specification. ISI Mark.(MAKE: MINIMAX/SAFEX/ FGE/LIFE GUARD) |
| 33 | Providing and fixing of Brass/Bronze/GM BALL VALVES having female threaded ends suitable for a working pressure of 10kg/sq.cm of following sizes complete as per specifications: (MAKE: SANT/ ZOLOTO/LP) |
| 34 | 50mm dia |
| 35 | 25mm dia |
| 36 | Supplying and installing of 3nos set of fire buckets of 24 gauge galvanized steel sheet, standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters \"Fire” in black and gold, with stand.(MAKE: FGE/CROWNSALES/MAC) |
| 37 | Fabrication Supplying installation testing & commissioning of electrical control panel of cabin constructionwill mounted type fabricated out of 1.6mm thick CRCA coated of approved shade after 7 tank treatment process with 4 nos 100 Amp. Aluminmum busbar cable alley inter connection having switchgears and accessories mounting and interal wiring earth terminals numbring etc. complete in all respect suitable for operation on 415 V.3 phase. 50 Hz AC Supply with enclosure as required with following accessories as required. (Make : TRICOLITE/FGE/ADLAC) |
| 38 | i. 4 pole 63 amps 35 KA MCB 1Nos. |
| 39 | ii. 4 pole 32 amps 10 KA MCB 2 Nos. |
| 40 | iii Voltmeter with selector switch 0 - 500 V 1Nos. |
| 41 | iv Ammeter 0.30 Amps with selector switch Without C1 1 Nos. |
| 42 | v DOL starter suitable for 7.5 H.P. motor 2Nos. |
| 43 | vi LED phase indicating lamps with HRCfuse MCB 3 Nos. |
| 44 | vii Selector switch for Auto/Manual/OFF position 1 nos. |
| 45 | Supplyof following sizes ofXLPE insulated PVC sheathed armoured aluminium conductor and copper conductor cable of 1.1 KV grade as required.(MAKE: KEI/HAVELLS/PLAZA ) |
| 46 | 3 x 16 sq. mm (From Fire Fighting panel to fire pumps) |
| 47 | Supplying and making end termination with brass compression gland and aluminium lugs for the following size of of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kv grade as required. |
| 48 | 3 x 16 sq. mm. |
| 49 | Providing and fixing in position on terrace (at all floor lvls) HDPE water storage tanks of approve (to the approval of Engineer -in- Charge) with cover with suitable locking arrangement and makingnecessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank.(Double Layer Tanks 5000 ltr each) |
| 50 | Supplying & Fixing of Energy saving display EXIT sign board Glass type specially designed for classic décor with excellent quality high efficiency and long life for single / both side display, well ventilated, powder coated having nominal size LED lamp, battery backup 6 hour to be installed on wall / ceiling etc. complete as required. (MAKE: FGE/ LEGRAND/MAC) |
| 51 | Providing & installing self glow signs luminescent U-1000 Alu. sheet with 2 mm thickness sheet on the wall / ceiling etc for the size of (14\"x10\", 10\"x8\", 4\"x4\" ) as reqd.(Make : Crownsales/FGE/MAC) |
| 52 | Supplying and laying of 1.1 KV Grade2 X 1.5 sq.mm. copper conducter control cables on surface complete with clamps etc as reqd. (MAKE:KEI/HAVELLS/PLAZA) |
