Supply And Installation Of Dg Set 25 Kv For Mc Office In Palwal Supply And Installation Of Dg Set 25 Kv For Mc Office In Palwal , Civil Work , Supply, Installation, Testing And Commissioning Of Load Bank With Digital Meter Module Cost Of Digital Amp. I Vo, M C PALWAL-Haryana

Supply And Installation Of Dg Set 25 Kv For Mc Office In Palwal Supply And Installation Of Dg Set 25 Kv For Mc Office In Palwal , Civil Work , Supply, Installation, Testing And Commissioning Of Load Bank With Digital Meter Module Cost Of Digital Amp. I Volt Meter With Selector Switch Wiring ( But Exluding Cost Of Incoming And Outgoing Mccbs ) Etc.Suitable For Operation Of 240/415 Volts Ac. Supply With Both Side Cable Allay, Inter Connection And Fixing The Same In Existing Ms Pedestal/Wall Complete With All Labour And Material Required For The Same Up To The Entire Satisfaction Of Engineer-In-Charge Of Work.23.24.4.2 Load Bank 8 Way 250 Am , New Hsr 23.27.1Supply And Erection Of Godrej Almirah Typem.S. Pedestal Made Of 50 Mm X 50 Mm X 6 Mm Angle Iron Frame With 3.00 Mm Thick M.S. Sheet Covering Including Shutters With Suitable Hinges And Locking Arrangement With Godrej Type Handle Including Round Bars. The Top Covering Should Have Downward Overhang Of 75 Mm On All Sides Of Pedestal, Having Two Sets Of Water Proof Ventilation Holes Of Suitable Size On The Sides , At Top And Bottom , Each Set Containing Four Nos. Holes To Discharge The Heat Produced By The Current. The Shutters Fixed With Rubber Gasket Of Superior Quality And Of Suitable Size To Make It Water Proof . The Pedestal Duly Painted Both Inside And Outside With Two Coats Of Approved Paint And Primary Coat And Its Legs Are Embeded Upto The Entire Depth In 1 :2:4 Cement Concrete Block , Projected 75 Mm All Around The Pedestal And And 200 Mm Above The Ground Level Including The Cost Of All Labour And Material Required To Complete The Job In All Respect Upto The Entire Satisfaction Of The Engineer In-Charge Of The Work:Supply And Erection Of Godrej Almirah Typem.S. Pedestal Made Of 50 Mm X 50 Mm X 6 Mm Angle Iron Frame With 3.00 Mm Thick M.S. Sheet Covering Including Shutters With Suitable Hinges And Locking Arrangement With Godrej Type Handle Including Round Bars. The Top Covering Should Have Downward Overhang Of 75 Mm On All Sides Of Pedestal , Having Two Sets Of Water Proof Ventilation Holes Of Suitable Size On The Sides , At Top And Bottom , Each Set Containing Four Nos. Holes To Discharge The Heat Produced By The Current. The Shutters Fixed With Rubber Gasket Of Superior Quality And Of Suitable Size To Make It Water Proof . The Pedestal Duly Painted Both Inside And Outside With Two Coats Of Approved Paint And Primary Coat And Its Legs Are Embeded Upto The Entire Depth In 1 :2:4 Cement Concrete Block , Projected 75 Mm All Around The Pedestal And And 200 Mm Above The Ground Level Including The Cost Of All Labour And Material Required To Complete The Job In All Respect Upto The Entire Satisfaction Of The Engineer In-Charge Of The Work: M.S. Pedestal Of Size 600 Mm Wide , 750 Mm High ,300 Mm Deep And Each 5436 Bottom Totally Open , Duly Embeded In 1 :2:4 Cement Concrete Block Of Size 750 Mm X 450 Mm X 200 Mm Above Ground Level , Having A Base Of Size900 Mm X 600 Mm X 250 Mm Below Ground Level. , New Hsr 24.2.2.3Laying Of Underground Cable 0. 75 Metre Below Ground Level Covered With Sand And Bricks Including Excavation And Refilling Of Trenches.:-16 Sq Mm To 35 Sqmm 2 To 4 Core 50 Sq Mm To 150 Sqmm 2 To 4 Cor , New Hsr 24.7.1 Providing Rcc Foundation Of M20 Grade (1 Cement:1.5 Stone Aggregate: 3 CoarseSand) I/C Excavation, Steel Reinforcement (Fe 500) @ 50 Kg/Cum Of Concrete Contents,Concrete Cover 50Mm, Over A Bed Of 75Mm Thick Pcc 1:5:10, Of Required DimensionsAs Per Oem Recommendations To Provide Levelled Surface For Placement Of The Dg SetComplete In All Respects And As Per Directions Of Engineer-In-Charge(Size Of Foundation Assumed = 5.0X1 .Bx1 .Om)30 To 40 Kva Dg Set , New Hsr 20.89 -3 --Designing, Supply & Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 +(-)1% Volts Ac Alternator Coupled Directly Through A Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standard Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover / Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specifications And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. +A) Diesel EngineB) AlternatorC) Battery 24 V.D) Base Plate.E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Metres.F) Tools, Standard PanelG) Metering Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator,Control Fuse, Frequency Meter, Cts)H) Metering Set 60/5A/11 Ov (Amp. Meter, Volt Meter)I) Overload Protection For Dc-1 No.J) Battery Charger 24V DcK)Copper Bus Bar Of Suitable SizeI) Kwh Meter 96 Sqmm SizeM) Starting Fuse Button And Key Switch9on/Off)N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, SetRunning, Load On, De Control And Other Required Accessories Complete In All RespectsTo The Satisfaction Of Engineer-In-Charge 25 Kv , Sitc Four Pole On Load Manual Change Over Switch In Ss Enclosure Of Hsr23.22.8.2 100 Amp 415 Volt

INR 500 /-

INR 11000.0 /-

INR 5.43 Lakhs /-

Name of Work:Supply and installation of dg set 25 kv for MC Office in Palwal

Sl. No.	Item Description
1	CIVIL WORK
2	Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. I volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCB"s ) etc.suitable for operation of 240/415 volts AC. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work.23.24.4.2 Load Bank 8 way 250 am
3	new hsr 23.27.1Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in-charge of the work:Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in-charge of the work: M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and each 5436 bottom totally open , duly embeded in 1 :2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level.
4	New HSR 24.2.2.3Laying of underground cable 0. 75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:-16 Sq mm to 35 sqmm 2 to 4 Core 50 Sq mm to 150 sqmm 2 to 4 Cor
5	new hsr 24.7.1 Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om)30 to 40 KVA DG Set
6	new hsr 20.89 -3 --Designing, Supply & erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. +a) Diesel Engine b) Alternator c) Battery 24 v. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT"s) h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size I) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, De control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge 25 kv
7	SITC Four pole ON LOAD Manual change over switch in SS enclosure of hsr23.22.8.2 100 amp 415 volt