Public Health Engineering Department-PHED has published Empanelment Of Eligible Contractors At Provincial Level And Fixing Of Item Rate For District Kulgam For Execution Of Jal Jeevan Mission ( Jjm ) Works Under Category -V- 1 Earth work in excavation by mechanical means (Hydraulic excavator) in found. Submission Date for this Tender is 16-12-2021. Shed Construction Tenders in Kulgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenchs (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed in big boulder strata. |
2 | Earth work in excavation bymanual means) in foundation trenchs (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed in big boulder strata. |
3 | Earth work in excavation by manual means over areas exceeding 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excavated earth upto 1 m, disposed earth to be levelled & neatly dressed in all kinds of soils |
4 | Extra for every additional lift of 1.5m or part thereoff. |
5 | Providing and laying of dry stone solling tightly hand packed on horizontal levels./dry stone boulder |
6 | Providing and Hand packing of Quarry stone boulders of required size into the wire crates excluding the cost of wire crates. |
7 | Dry random rubble masonry with hard stone (Quarry) in foundation and plinth: With bond stone. |
8 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
9 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with:-1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
10 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
11 | Provodong and laying in position cement concrete of grade of 1:4:8 mix using 40 mm aggregates |
12 | Provodong and laying in position cement concrete of grade of 1:3:6 mix using 20 mm aggregates |
13 | Provodong and laying in position cement concrete of grade of 1:2:4 mix using 20 mm aggregates |
14 | P/Lin position specified grade of reinforced cement cencrete (1:2:4) mix excld. the cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. With stone agg. 20mm nominal size |
15 | P/ L in position specified grade of reinforced cement conc.excl. the cost of centering, shuttering, finishing & Reinforcement all work up to plinth level (1:1.5:3) 1 cement,1.5 course sand,3 graded stone agg. 20 mm nominal size) |
16 | RCC work in walls (any thickness) incl attached pilasters, butresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. upto floor five level excl. the cost of centering , shuttering, finishing & reinforcement 1:1.5:3(1cement, 1.5 Course sand, 3graded crushed stone) agg. 20mm nominal size |
17 | Reinforced cement conc. Work in beams,suspended floors,roofs having slope upto 15degree,landings,balconies shelves, chajjas, lintels, bands, plan window sills, stair cases and spiral stair cases upto floor five level excl.the cost of centering, shuttering, inishing and reinforcement in 1:1.5:3 mix ( 1 cement,1.5 coarse sand 3 graded stone aggregate ) 20 mm nominal size. |
18 | RCC work in arches domes vaults folded plates roofsnupto floor five level excl. the cost of centering , shuttering, finishing & reinforcement 1:1.5:3 (1cement, 1 .5course sand, 3graded crushed stone) agg. 20mm nominal size |
19 | Brick work withcommon burnt clay FPS (Non-modular) bricks of class designation 75 in foundation & Plinth in 1:4 nominal mix (1 Cement, 4Fine sand). |
20 | Extra for brick work in super structure above plinth levelupto floor 5 level (by manual means). |
21 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
22 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
23 | Providing and instalation of house hold connection tounconnected household including providing and fixing of necessary pipes specials,earthwork at connection and whatever necessary.complete |
24 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia. |
25 | 80 mm dia. |
26 | 100 mm dia. |
27 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge.Including excavation and refilling trenches after taking out the pipes. 150mm |
28 | Providing and fixing of regulating valves/air valves at various spots for regulation of water supply (complete Job) :- Class-1(250 mm dia Sluice valves |
29 | 200 mm dia Sluice valves |
30 | 150 mm dia Sluice valves |
31 | 100/80/65 mm diagate valves/Sluice valves |
32 | Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade |
33 | Removal of trees, surface boulders/ clearance of silt by engaging manual labours. |
34 | Preparation of subgrade by excavating earth to an average of 22.5 cmdepth, dressing to camber and consolidation with road roller of 8-12 tonnecapacity including making good the undulation etc. and disposal of surplus earth upto 50 meters. |
35 | Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required.Bituminous portion |
36 | Water bound macadam |
37 | Extra for levelling & neatly dressing of disposed soil completely as directed byEngineer-in-charge. |
38 | Supplying and stacking at site Graded crushed stone aggregate:-22 to 90mm |
39 | Supplying and stacking of stone screening/ chipping at site:-I to III grade |
40 | Supply and stacking of stone dust/Moorum at site:-Ist to III |
41 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering andcompacting to the required density Ist to III category:- |
42 | Centering and shuttering including struting proping and removal of form work.Foundation |
43 | Walls |
44 | Beams Lintels Bressumers and cantilivers |
45 | Coloumns Pillars Piers |
46 | Suspended Floors |
47 | Stairs |
48 | Arches Domes |
49 | Edges of slabs |
50 | Extra for shuttering in circular shape:foundation |
51 | Walls |
52 | Beams Lintels Bressumers and cantilivers |
53 | Columns, pillars, piers, abutments, posts and struts. |
54 | Suspended floors, roofs, landings, balconies and access platforms |
55 | Extra for arches, domes, vaults exceeding 6 m span |
56 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand) |
57 | 12mm thick cement plaster in 1:4mix(1, cement, 4 fine sand) |
58 | 12mm thick cement plaster in 1:3mix(1, cement, 3fine sand)internal works |
59 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
60 | Providing Reinforcement to RCC works including bending ,binding ,cuttingstratining and placing in position complete. |
61 | Structural steel work welded in built up sections in trusses & framed work incld, cutting hoisting fixing in position & applying a priming coat of approved steel primer all complete. |
62 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
63 | Structural steel work in single section fixed with or without connecting plate, including cutting, hoisting, fixing in position & applying a priming coat |
64 | Providing & incorporating ( during conc.) G.P sheet strips water seal 1.25 mm thick at construction joints incld jointing of ends so as to form a continous berries. |
65 | Providing corrugated G.S sheet roofing incld vertical/curved surface fixed with polymer coated J/L hooks, bolts & nuts 8mm dia with bitumen & G.I limpet washers or with GI limpet washers filled with white lead and incl. a coat of approved steel primer & two coats of approved paint on overlaping of sheets complete ( upto any pitch in horizontal/vertical of curved surface ) excl. the cost of purlins & trusses and incld cutting to size and shape wherever required. ( 0.63 mm thick Zinc coating not less than 275 gm/m 2) |
66 | P/F hand rail of apprved size by welding etc to stainless steel ladder railing, balcony railing and stair case railing and similar work. |
67 | wood work in frames of doors, windows clear stories and other frames fixed in position with hold fasts lugs in first class kail wood |
68 | Providing & fixingin panelled or paneledand glazed shutters for doors windows and clear story windows incld ISI marked MS pressed butt hinges bright finished of requirted sizewith necessary screws excld penneling which will be paid seperately all complete as per directions of Er. incharge 35 mm thick1st class kail wood . |
69 | providing and fixixng pannelling or panelling and glazing in door and windows first class kailwood 25 mm to 40 mm thick shutters for |
70 | P/F 35mm thick wire guaze shutters using galvanized MS wire guaze of avg widthfor aperture 1.4 mm in both directions with wire of dia . 0.63mm for doors windows& clear story windows incld, ISI marked bright finished or & black enamelled M.S pressed but hinges with necessary screws of required sizeIn 1stclass kail wood. |
71 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : . First class kail wood |
72 | Supply and fixing rolling shutter of approved make made of required size MS lathes interlocked together through their entire length etc. complete with 80x0.90 mm M/S Laths with 0.90mm thick top cover. |
73 | Providing , hoisting and fixing ,trusses, purlins,rafter, using 1st class popular wood. |
74 | providing and laying 40 mm thick damp proof course in 1:2:4 |
75 | Applying priming coat with ready mixed pink or grey primer of approved brand & manufacture on wood work ( hard and soft wood). |
76 | Painting with synthetic enamel paint of approved brand & manufacture to give an even shade two or more coats on new work. |
77 | Providing and applying white cement based putty of approved thickness 1mm of approved brand and manufacture over the plastered surfaces to prepare the surface smooth and even complate. |
78 | applying one coat of cement primer on exeterior |
79 | ditempering with oil bound distemper of approved band |
80 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work |
81 | Marble stone flooring with 18mm thick Marble stone (sample of Marble shall be approved by Engineer incharge) over 20mm avg. thick base of cement mortar 1:4 laid and jointed with grey cement slurry incl. rubbing & polishing complete with Makrana dongri veined). |
82 | P/F of 1st quality ceramic glazed tiles confirming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT,SOMANY,KAJARIA or equivalent make in all colour, shades except bergandy, bottle green, black of any size as approved by Err. incharge in skirting, risers of steps and dados over 12mm thick bed of cement mortor 1:3 (1 cement, 3 coarse samd) and jointing with grey cement slurry @ 3.3 Kgs/SM including pointing in white cement mixed with pigment of matching shade complete. |
83 | Fabrication providing/fixing MS ladder wherever is required comprising of 50x50x6mm angle iron with chequered plate complete job. |
84 | Providing & fixing of M.S eves boarding including MS Angle backing, painting with synthetic enemal paint over metal primer of reputed brand and manufacture, 300mm wide complete. |
85 | P/F of glass panes 4mm thick with wooden fillets |
86 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
87 | P/F of rectangular shape glass |
88 | Providing and fixing soil, waste and vent pipes : PVC type-B : 75 and 100mm dia |
89 | Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
90 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:-100x10 to 250x10mm |
91 | Providing & laying of filter media effective size of sand varies from 0.45 mm to 0.70 mmhaving uniformity coefficient between 1.30 to 1.75 & should be dust free & free from other organic impurities to be obtained from Ganderbal Nallah & the size of gravel should varry from 2mm to 40mm incld all carriages complete. |
92 | Extra for providing and mixing water proofing material in cement conc work in doses by weight of cement as per manufacturing specifications. |
93 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
94 | Providing and fixing bright finished brass handles with screws etc. complete :-75 to 125 |
95 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
96 | P/f of 100mm dia CI sluice valve with caps, nuts bolts, washers complete job(Kirloskar make) |
97 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
98 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
99 | 19.43 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
100 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in?charge. |
101 | Providing and fixing of 50 ltr capacity geysers of Venus, ReCold or equivalent including fittings, and complete job |
102 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia |
103 | Providing and fixing of superior quality wall to wall matting as per the direction of engineer incharge including 12 mm polystyreng fom. |
104 | Construction of RCC ringtype soakage pitof standardsize &6 mtr depth complete job. |
105 | Provision for determining safe bearing capacity of soil by some reputed geo technical consultancy and subsequent structural design of all components of RSFP by reputed structural consultant duly vetted by DIQC Srinagar . |
106 | Supply and fixing of lightening conductor complete job |
107 | P/F of DI/CI sluice valves125mm confirming IS 780 read with upto date amendments standard make (Kirloskar/Vag) meant for pipe gallery in filter beds required to be operated from operating plateform height 4.5m. Hence suitable arrangement for manual operations to be provided. the job includes P/F and fabrication of MS 6mm thick tail pieces as per site requirement, nuts bolts and seals. the sluice valves should be fitted with extension rods, pedestrial etc (Filter beds, inlet and outlet). Complete job. |
108 | P/F of DI/CI sluice valves200mm confirming IS 780 read with upto date amendments standard make (Kirloskar/Vag) meant for pipe gallery in filter beds required to be operated from operating plateform height 4.5m. Hence suitable arrangement for manual operations to be provided. the job includes P/F and fabrication of MS 6mm thick tail pieces as per site requirement, nuts bolts and seals. the sluice valves should be fitted with extension rods, pedestrial etc (Filter beds, inlet and outlet). Complete job. |
109 | P/F of 80mm dia PVC under drainage laterals 8mm thick fabricated out of Korean foam or prince make with 9mm perforations as per design in the bed provided at 60° along with PVC, Tees and end caps to be grouted in M-25 grade cement conc at ends. the pressure rating 10kg"s/Cm². |
110 | Providing installation testing commissioning of rate of flow metre reliable make from 50 to 150 rating of recording type Mahindra make complete job. |
111 | Providing installation testing commissioning of loss of head assembly reliable make from 100 to 500 rating complete job. |
112 | Providing installation testing commissioning of double Flanged MS Pipes of 6mm thick. The Job includes cutting welding and fabrication complete job:-100 to 250mm |
113 | 150 to 250mm flangedpipe bend |
114 | Providing installation testing commissioning of double Flanged DI sluice valves complete job.150 to 300 |
115 | Providing installation testing commissioning of double flanged MS pipes of 6mm thick. The job includes cutting welding and fabrication complete job.200mm |
116 | 125mm/150mm dia |
117 | 100mm |
118 | 80mm |
119 | P/F of air blower (Everest make or Kay make) capable for providing compression @ 11.813 cum per minute @ 0.35 kG/Sqmwith suitable 3 phase induction motor with auxilary pipe system up to filter beds filling pressure guage nozzels cement conc block base plate air check valves , non return valves,cement conc block in M-20 grade foundation bolts base frame fabricated out of 100mm MS channels,the job also includes PRV pipe and pipe fittings starters and PVC 19/18 copper wire complete job and other electrical controlling devices fitted on pannel board. Complete job. |
120 | Providing installation testing commissioning of Kirloskar make monoblock pumping equipment capable of lifting of 35 cum per hour for a height of 20m with 3 phase appropriate rating power induction mover with starter assembly suction and delivery pipe fittingsof required size up to back wash tank , the job includes all electrical operating devices fitted on pannel board. |
121 | P/F of mechanical equipment required for Alum solution tank with electrically driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 phase electric motor 1 HP capacity (Kirloskar/Crampton Greaves make) along with 40mm dia PVC pipe and pipe fittings up to point of application in the flash mixer along with washout arrangement plus 25mm dia GI inlet water line from back wash tank to alum tank with GI pipe specials and gate valves (B-class pipe) incld. electrical operating devicescomplete job. |
122 | P/F of mechanical equipment required for Bleach solution tank with electrically driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 phase electric motor 1 HP capacity (Kirloskar/Crampton Greaves make) along with 40mm dia PVC pipe and pipe fittings upto point of application in the flash mixer along with washout arrangement plus 25mm dia GI inlet water line from back wash tank to alum tank with GI pipe specials and gate valves (B-class pipe) incld. electrical operating devicescomplete job. |
123 | P/F of MS rotating bridge fabricated out of ISA 50x50x6mm suitable for bearing silt load of clarifloculator (Clarifier radius = 5.0m and floculation chamber radius = 2.5m). The job includes central bearing assembly shaft assembly MS wheels O-stop wheels, end carriages with adequate rating prime mover 3 phase 440 volts 50 Hzincluding fly wheel plus MS rail ISLC-100 on fish plate grounted on top base of calrifloculator in cement concreate 6mm thick chequreds flooring over full span of bridge. the job includes providing and installation of 3 phase cubical electrical pannel having capacity of 63 Amp. with one incoming feeder and one outgoing feeder including of auxilary system fitted with appropriate rating 3 phase MCCB, OCB and MLI (L&T make) starters for operation of electrical motors and end carriage system. the job also includes connecting pole system and appropriate guage PVC copper wire. Complete job. |
124 | Providing installation testing commissioning of flash mixer assembly suitable for a dia of 0.70m comprising of SS churners with vertical type hollow shaft prime mover 3 phase 150 RPM. The job includes constant bleed assembly with reduction gear box and operational gear to regulate the bleed. Complete job. |
125 | Providing installation testing commissioning of 3 phase oil immersed 30 KVA voltage stablizer (Servo make) capable to operate incoming voltage of 180 volts and outgoing voltage of 410 +_ 10% volt. Complete job. |
126 | P/L of 4 core 50mmAluminium cable to be laid as service line from nearest LT pole up to main pannel board includingto be laid underground. |
127 | Providing installation testing commissioning of 100 Amp dust/moisture proof cubical pannel board fitted with 3 phase 100 Amp MCCB L&T make 02 No. and 63 Amp single phase MCCB for lighting and heating systems. The job also includes 1 No. amp metre 0-100 AE make with CT coils and one number voltmetre AE make 0-500 with selector switches L&T make and 3 No. indicator lamps Neon type complete job. |
128 | Providing and fixing installation testing commissioning of heating points in 2.5mm PVC copper wire. |
129 | Providing and fixing installation testing commissioningof lighting points in 1.5mm PVC copper wire, LED conical type of handles/Syska make of 12 watt including push buttons etc complete job. |
130 | Providing and fixing installation testing commissioning of Philips/Havelsmake high mass security lights to be fitted inside filtration plant premesis with high mass GI octagonal poles including auto transformer, connecting cables and other acessories. complete job. |
131 | Providing and fixing installation testing commissioningof exhaust fan in the chemical house complete job (Havell"s, Usha, crompton greaves make). |
132 | ceiling fans for quarter |
133 | Providing and fixing of16 Sqm Submersible cable of Haveles /Finolex make for interconnecting various Electric gadgest. |
134 | Providing necessary earthing for motor panels lighting and heating networks as per prevailing electric rules with latest amendments with necessary medium includingrefilling complete job (Electrode type). Complete job. |
135 | Providing and laying of shockproof 25mm thick rubber matting of Jyothi make. |
136 | Providing and fixingof 50 kVA D.G set Kirloskar Green air cooled complete job. |
137 | Providing and fixing ofHume pipe 600mmwith coller |
138 | Electrical Sub Station 100 KVAincld . poles and conductor other allied fittings and fixtures,channel nuts bolts incld LT and HT poles and conductor. Complete job. |
139 | Filling available excavtedearth (excld. rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering lead upto 50 m, & lift upto 1.5 m. |
140 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
141 | Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
142 | Providing of wire crates including all carriage complete job. |
143 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
144 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
145 | Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6mm and diagonals of M.S flat 30x6mm. |
146 | provding fixing of ms lid |
147 | Restorationof Road Berm Along Pipe allignment to be damaged -1000 mts @ Rs 480/mt |
148 | Restoration of W.B.M road at spots 1000 mt @Rs 100/mt |
149 | Restoration of W.B.M road with 25 mm semidense 200 mts @ Rs 1280/mt |
150 | W.B.M road with butiminous mecadam & Semi Dense 500 mt @ 1580/m |
151 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipes) |
152 | providing push on joints300mm |
153 | 250MM |
154 | 200/100mm |
155 | 150mm |
156 | 125mm |
157 | 100mm |
158 | 80mm |
159 | layinmg fitting ofGI Pipes100 mm |
160 | 80 mm |
161 | 65 mm |
162 | 50mm |
163 | 40mm |
164 | 25mm |
165 | 20mm |
166 | 15mm |
167 | Making gi connections15mm to 40mm |
168 | 50mm to 80 mm |
169 | PROVISION FOR DISMANTLING AND REPAIRS CEMENT CONCRETE ANDTILED LANED |
170 | 250mm diA SLUICE VALVE |
171 | 200 MM DIA SLUICE VALVE |
172 | 100MM DIA SLUICE VALVE |
173 | R.R Massonary in 1:6 mix |
174 | Dry massonary with quarry stones |
175 | Pointing on stone work in 1:3 mix. |
176 | Wood work in first class kail wood |
177 | Providing 50 mm thick cement concrete flooring with floating coat of neat cement |
178 | Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof. |
179 | Long pan pattern white vitreous china W.C. pan of size 580 mm. |
180 | Providing and fixing water closet squarting pan (indian type with 100mm sand cast iron p or s trap, 10 lit) |
181 | Providing and fixing of salem stainless steel kitchen sink. Size 610x510x200mm |
182 | Providing and fixing of PVC waste pipe for sink |
183 | Providing and fixing of sanitary fitting |
184 | Providing ridge or hip of width 60 cm over all with plain G.S sheets |
185 | Provision for plumbing, sanitary, iron grills and electrification to the qrarter (Lump Sump) |
186 | Providing and fixing of ornamental MS Gate |
187 | Painting two or more coats of synthetic enamel of approved brand and manufacturing incl. priming coat of approved brand and manufacturer |
188 | Wood work in trusses in first class fir wood |
189 | a) Carriage of material from source to dumping site at road by mechnical transport.Cement 20KM/steel |
190 | STEEL |
191 | b) Sand /20MM AGGREGATES |
192 | d) 40mm Aggregate |
193 | e) Bricks |
194 | f) Stone Soling |
195 | Quarry stone |
196 | h)GI pipe |
197 | 300mm |
198 | 250MM |
199 | 200mm |
200 | 150/100 |
201 | 125mm |
202 | 100 G.I |
203 | a)Extra carriage of material from dumping site to actual work site by manual labourCement 500 MTR |
204 | b) Steel500 MTR |
205 | c) Sand & 20mm Agg. 500 MTR |
206 | d) 40mm Aggregate 500 MTR |
207 | BRICKS 500 MTR |
208 | f) stone SOLING 500 MTR |
209 | quarrystone |
210 | h)GI pipe |
211 | 300mm |
212 | 250MM |
213 | 200mm |
214 | 150mm |
215 | 125mm |
216 | 100 G.I |
217 | supply of stone screening /chipping of sizerange excl carriage:13.20 - 11.20 mm Nominal size |
218 | Laying of WBM with specified stone aggeregate, stone screenings and binding materials , consolidation with power roller of 08 to 10 Ton capacity etc. |
219 | Supply and fixing of level indicator complete job |
220 | Providing and laying 25 mm thick semidense bituminous concrete with specified size stone aggregate and tar content @ 5% by weight of total mix |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail