|
| 1 | Dismantling lime or cement concrete and removing the debris within a lead of 50 mand stacking the useful materials etc., as directed by the Engineer-in-Charge, Complete. |
| 2 | Cutting and removing W.B.M surface / road including soling metal etc., and dispose the debris within a lead 50 m stacking the useful material etc., as directed by the Engineer-in-Charge, Complete. |
| 3 | Earthwork in excavation over areas in soft / loose soil (exceeding 30cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed etc., as directed by the Engineer-in-Charge, Complete. |
| 4 | a) up to 1.5 m lift |
| 5 | b) extra for every additional liftof1.5m or part thereof in soft / loosesoil |
| 6 | Filling with available excavated earth (excluding rock ) in trenches, plinth sides of foundations etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m etc., as directed by the Engineer-in-Charge, Complete. |
| 7 | Bailing out water from foundations/pipe line trenches with oil engine driven pump sets including hire charges, fuel charges and wages for the driver and helper etc., as directed by the Engineer-in-Charge, Complete. |
| 8 | Shoring and strutting for foundations/pipe line trenches single staging upto 2.5metc., as directed by the Engineer-in-Charge, Complete. |
| 9 | Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc., as directed by the Engineer-in-Charge, Complete. All labour and materials. |
| 10 | Supplying and stacking good earth, tank silt or alluvial soil (good earth to be obtained from the approved source and measured in stacks and 20% deduction will be made for voids to arrive net quantity) at site of desired points etc. as required and as directed by the Engineer-in-chargecomplete. All labour and materials. |
| 11 | Plain cement concrete 1:4:8 nominal mix (using 170 kg of cement per m3 of finished concrete) using 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as directed by the Engineer-in-Charge, Complete. All labour and materials. |
| 12 | Plain cement concrete M 20 mixusing 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping or vibrating, finishing, curing etc., including necessary form work (boxing) etc., as required and as directed by the Engineer-in-Charge, Complete. All labour and materials. |
| 13 | R.C.C. M 30 mix in all types of beams, lintels, columns, square or circular or rectangular etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating, finishing, curing, cost of super plasticizer etc., including necessary shuttering etc.,, as required and as directed by the Engineer-in-Charge, Complete. All labour and materials, but excluding cost of reinforcement. |
| 14 | a) up to 3.00m height |
| 15 | b) From 3m to 6m height+scaffolding+lift |
| 16 | R.C.C. M 30 mixin column footings, strip footings, raft foundations, plinth beams, bed blocks, cellular raft, plinth courses and similar types of works etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping and/or vibrating, finishing, curing, form work, cost of super plasticizer etc., as required and as directed by the Engineer-in-Charge,complete. All labour and materials, but excluding cost of reinforcement. |
| 17 | R.C.C. M 30 mix in roof slabs, landing slabs, staircase slabs, culvert slabs and similar type of slabs etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating, finishing, curing, cost of super plasticizer etc., including necessary shuttering etc., as required and as directed by the Engineer-in-Charge,complete. All labour and materials, but excluding cost of reinforcement. |
| 18 | Supplying, placing and maintaining in position ribbed tor steel or mild steel reinforcing bars varying from 6mm to 40 mm dia. including straightening, cutting, bending, tying grills with annealed steel binding wire of 18 guage(1.22mm dia.) including cost of binding wire, transportation to site etc., as directed by the Engineer - in - Charge, complete.All labour and materials. |
| 19 | Providing random rubble masonry in C.M 1:5 in plinth and foundations including necessary dressed stones at corners and junctions, curing etc., as directed by the Engineer - in - Charge, complete.All labour and materials. |
| 20 | Providing brick work in C.M 1:5 in super structure using approved quality standard bricks of class designation 35 including scaffolding, lift, curing etc., as directed by the Engineer - in - Charge, complete.All labour and materials. |
| 21 | Plastering to concrete surface with CM 1:3 (1 cement: 3 sand) of thickness not exceeding 6mm using 25.5 kg of cement and 0.05 m3 of sand per 10 m2 smooth and even finishing, cleaning the surface, hacking and roughening the concrete surface, curing etc., as directed by the Engineer - in - Charge, complete.All labour and materials. |
| 22 | Plastering with CM 1:5, 12 mm thick including raking out joints, cleaning the surface, curing etc., as directed by the Engineer - in - Charge, complete.All labour and materials. |
| 23 | Supplying and fixing vertified polka dot terracotta ceramic tiles confirming to IS Specification of approved pattern colour and shade tiles of size 12\"\"X 12\"\" for flooring laid on a bed of 12mm thick CM(1:3) including pointing with white or colour cement, curing etc., as directed by the Engineer-in-Charge, complete. All labour and materials. |
| 24 | Supplying and fixing vitrified tile Johnson make marbonite Jupiter of size 600 X 600 X 10 mm of approved pattern colour and shade and design for floors laid on a bed of 12 mm thick in CM 1:3 including pointing with white or colour cement curing etc., as directed by the Engineer-in-Charge,complete. All labour and materials. |
| 25 | Supply ofstructural steel such as M.S. Angles, channels, joists, Plates and flats etc., conforming to relevant latest Indian standards including transportation, loading, unloading and stacking at site of work etc., as required and as directed by the Engineer-in-charge, Complete.All labour and Materials. |
| 26 | Joists 250x125 mm to 300x140 mm |
| 27 | Joists 350x140 mm to 450x150 mm |
| 28 | Angles and Flats |
| 29 | Channels 75 x 40 mmm to 400 x 100 mm |
| 30 | M.S.Plates |
| 31 | Supplyingof M.S square tubes of required sizes conforming to I.S 4923 of latest version at site of work including loading, unloading, stacking and transportation to site etc., as required and as directed by the engineer in charge, complete.All labour and materials. |
| 32 | Fabricating, welding or revetting or bolting steel built up sections, trusses and framed work including cutting, drilling holes, hoisting, fixing in position and applying a priming coat of red-oxide paint etc., as directed by the Engineer-in-Charge, complete.All labour and materials, but excluding cost of steel. |
| 33 | Supplying iron works of bolts and nuts and washers including fixing etc., as directed by the Engineer-in-Charge,complete. All labour and materials. |
| 34 | Supplyinghydraulic truck crane of 30 t capacityincluding hire charges, fuel charges and crew charges etc. as directed by the Engineer-in-Charge, Complete. All labour and materials (payment will be made for number of hours worked at site only). |
| 35 | Supplying and fixing of Pre-painted Galvalume Trapezoidal profile Roofing sheets of approved make with 0.50 mm thickness, Coating: Alu-Zinc AZ150 GSM, Tensile strength: 550 MPA, Paint coating: Regular modified polyester painting, Painting thickness (Top): 18 to 20 microns, (Bottom): 5 to 7 microns, with regular range colours in roofing or walling including hooks, bolts, nuts, washers and screws etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials but excluding cost of ridge pieces. |
| 36 | Supplying and fixing aluminium composite cladding of 4 mm thick of approved make (Alucopanel,alucobonel,Reynobond, lennox durabuild, alstrong, legame, alpolic, Alocomat, Alshine etc., ) with skin material 0.25mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50 x 25 x 1.5mm) angle cleasts, weather sealants, rivets.GI brackets all as approved, using suitable bolts on stactural steel work including neccsary accessoriesfor finished item of work etc., as directed by the Engineer - in - Charge, complete. All labour and materials.But excluding cost of stactural steel fabrication, if any. |
| 37 | Providing and fixing of stainless steel railing to the garden railings / hand railing etc., made with SS 316, 16 gauge thick. The railing wall be made with top rail 56mm dia. vertical posts 38mm dia with a spacing 1.2m and a height of 900mm from floor level and 3 numbers of horizontal pipes of 19.20mm dia. including cost of pipes, welding, grinding transportation to site of work and fixing 12mm thicktoughened / frosted and designed glass with SS studs makinghole with drilling machine etc.,as directed by the Engineer-in-charge, complete. All labour and materials. |
| 38 | Supplying and fixing of anodised aluminium doors, windows, ventilators etc., of standard sections of INDAL or equivalent joints mitred and welded manufactured to relevant I.S. standard specification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodised aluminium beading, fittings such as hinges, handles,applying and removing lacquer coat etc. as required and as directed by the Engineer - in - Charge,complete.All labour and materials. |
| 39 | Aluminium Doors |
| 40 | Aluminium partitions or door side lights fully glazed or partly glazed and partly fixed with pre-laminated particle board 6mm thick OSL exterior grade ECOBOARD or equivalent. |
| 41 | Flooring 50 mm thick (using 20.2 Kg of cement per m2) with C.C. 1:2:4 nominal mix using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in alternate panels, tamping, finishing with a floating coat/ rendering neat and smooth with cement including cement slurry, curing etc., as directed by the Engineer - in - Charge,complete.All labour and materials. |
| 42 | Supply and placing the Non-shrink Free flow HIGH strength precision grout conforming to relevant latest Indian Standard specifications etc., as directed by the Engineer - in -Charge, complete. All labour and materials. |
| 43 | Providing two coats of white cement based putty Birla or JK or equivalent quality of approved make to walls, ceiling surfaces etc., with putty blade or trowel including cleaning the surface, scraping the surface with fine water proof emery paper after consecutive coats make the surface ready for painting etc., as directed by the Engineer - in -Charge,complete. All labour and materials. |
| 44 | Painting two coats to walls, ceiling surfaces, with approved plastic emulsion paint including cleaning the surface etc., as required and as directed by the Engineer - in -Charge,complete. All labour and materials |
| 45 | Painting priming coat with white cement ACC or Birla or J.K.Brand or equivalent quality of approved make to walls, ceilings etc. including cleaning the surface, scraping the surface and washing with soap water including watering etc., as directed by the Engineer - in -Charge,complete.All labour and materials. |
| 46 | Painting two coats to new iron work with synthetic enamel paint of approved colour and shade except white enamel paint including cleaning the surface and scraping the surface wherever required etc., as directed by the Engineer - in -Charge,complete. All labour and materials. |
| 47 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plasterd concrete surfaces etc., as directed by the Engineer - in -Charge,complete. All labour and materials. |
| 48 | Transportation of debris and excavated earth up to a lead of 4 KM including stacking, loading and unloading, and levelling the unloading materials at the place of unloading by mechanical means etc., as directed by the Engineer-in-charge, complete. |
| 49 | Providing and fixing medium grade G.I. pipes and specials (as per I.S.1239) including cutting the pipes, threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool, clamps etc., wherever necessary including fixing in house plumbing system and making good the cutting as per original etc., as directed by the Engineer-in-charge, complete. All labour and materials. |
| 50 | 15 mm dia |
| 51 | 20 mm dia |
| 52 | Supplying and fixing 1000 litres capacity polyethylene water storage tank conforming to I.S. 12701, rotational moulded cylindrical vertical type including top cover with locking provision, necessary G.I. fittings for inlet, outlet, overflows and washout including lifting, hoisting in position, fixing etc., as directed by the Engineer-in-charge, complete.All labour and materials. |
| 53 | Supplying gun metal wheel valve half way with socket ends of approved make at site of work etc., as directed by the Engineer-in-charge, complete. All labour and materials. |
| 54 | 15 mm dia |
| 55 | 20 mm dia |
| 56 | Supplying and fixing ball valve 20mm nomina sizeof approved quality as per I.S. 1703, as required including polyethylene float etc., as directed by the Engineer-in-charge, complete. All labour and materials. |
| 57 | Rendering smooth the surface using 1kg of cement per m2 of area including thread lining, curing etc., as directed by the Engineer-in-charge, complete. All labour and materials. |
| 58 | Providing scaffolding with necesssary ballies, nails, ropes etc., including all leads and lifts, materials and labour etc., as directed by Engineer-in-charge, complete. All labour and materials.For first floor - 3 to 6 Mtrs. |
| 59 | Removing C.C. Blocks in pavements carefully without damaging the blocks and reuse the same wherever necessary including removing the mortar joints around block and stacking them within a lead of 50 m. etc., as required and as directed by the Engineer-in-charge complete. |
| 60 | Dismantling structural steel sections such as joists, channels, angles, rails etc., including stacking the useful materials and removing the debris within a lead of 50 m etc., as required and as directed by the Engineer-in-charge, complete. |
| 61 | Dismantling A.C. sheet or C.G.I. sheet / PPGL sheet /Aluminium composite cladding with skin material roofing and / or walling including ridges etc., and stacking the useful materials and removing the debris within a lead of 50m etc., as required and as directed by the Engineer-in-Charge, complete. |
| 62 | Supply of Second class Artisans such as Carpenter/ Mason / painter / Fitter / Welder with necessary tools and tackles etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials. |
| 63 | Supply of Man Mazdoor / Women Mazdoor / Watchmen, Gangmen / Mazdoor (unskilled) to work in any site conditions etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials. |
| 64 | Supply of Hydra crane 8.0t to 10.0t on hire basis at site of work including hire charges, crew charges and fuel charges etc., as directed by the Engineer-in-charge, complete. (Payment will be made for number of hours worked at site only). |
| 65 | Supply of Motor Truck for the transportation of all sorts of materials such as sand, gravel, metal, steel, cement, boulders, debris, furniture, water supply pumps and motors including fuel charges, driver charges etc., as directed by the Engineer-in-Charge, complete. (Payment will be made for number of hours worked at site only) |
