|
| 1 | Appendix A |
| 2 | Supply of labels for 2000ml packaged drinking water bottle having 65mm width, 328 mm cut length,maximum roll dia of 500 mm,Core I D 152 mm,The label shall be transparent BOPP Thermal Laminating Film only with five colour printing.The thicknessof the label shall be minimum 36 micron and maximum 40 micron includingan allowabletolerance of +/- 1 micron.Material should conform to BIS standards and of suitable grade for labeling packaged drinking water / mineral water /food stuff.The product quality should be in linewith the label shall be legible & readable and sizes as per BIS standard.The quality of film shall be of high standard to maintain strength for continuous high speed operation, no wrinkles,better pasting on bottles etc.minimum roll diameter shall be arrived as per weight mentioned below. Each label roll have no joint inside and shall be continuous in winding. The label shall be wound tight and level.The packing should be in such a way that label winding shall not shift to sides or become loose while handling.Weight of label of one roll: around 9kg. Cost shall be inclusive of all conveyance and delivery at the factory at Malankara(Idukki)and shall be inclusive of all unloading charges at site |
| 3 | Supply of labels for 1000ml packaged drinking water bottle having 56mm width, 263 mm cut length,maximum roll dia of 500 mm,Core I D 152 mm,The label shall be transparent BOPP Thermal Laminating Film only with five colour printing.The thicknessof the label shall be minimum 36 micron and maximum 40 micron includingan allowabletolerance of +/- 1 micron.Material should conform to BIS standards and of suitable grade for labeling packaged drinking water / mineral water /food stuff.The product quality should be in linewith the label shall be legible & readable and sizes as per BIS standard.The quality of film shall be of high standard to maintain strength for continuous high speed operation, no wrinkles,better pasting on bottles etc.minimum roll diameter shall be arrived as per weight mentioned below. Each label roll have no joint inside and shall be continuous in winding. The label shall be wound tight and level.The packing should be in such a way that label winding shall not shift to sides or become loose while handling.Weight of label of one roll: around 8kg. Cost shall be inclusive of all conveyance and delivery at the factory at Aruvikkara(Trivandrum)and shall be inclusive of all unloading charges at site |
| 4 | od200119/2020_2021 : Supplying and providing chair made with MS seating, MS frame work, MS back rest and MS head rest and dimensions 400mm x 400mm x 450mm seat height as required in the individual school as mentioned in the name of work |
| 5 | od200122/2020_2021 : Supplying and Providing of Circular/Rectangular stool with 19mmdia/square Stainless<br>steel Frame and dimension 360mm dia/360mmx360mmx450mm height and leg rest at 75mm from ground in<br>the individual school as mentioned in the name of work |
| 6 | od200124/2020_2021 : Supplying and providing of metal steel Almirah having dimensions 1005mm x 457mm x 457mm including polishing fittings, carriage etc complete of reputed make (20 gauge front and 22 gauge side and back) in the individual school as mentioned in the name of work. |
| 7 | od200127/2020_2021 : Supplying and Providing rectangular steel table with locker of dimensions<br>1200mmx800mmx600mm with 25mm thick ISI Prelaminate MDF board/Engineered wood or equivalent table<br>top with wooden finish having 25mm edge leaping with Engineerind wood or PVC material including<br>carriage,fitting etc complete in the individual school as mentioned in the name of work |
| 8 | 18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. |
| 9 | od200134/2020_2021 : Supply and fixing of C.P towel rod 450mm long or nearest available length including<br>cost of materials, labours etc complete |
| 10 | 17.11.1 : Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 450x300x150 mm |
| 11 | 18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 12 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 13 | 50.18.9.13.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall |
| 14 | 50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall |
| 15 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 16 | od200136/2020_2021 : Supplying and providing Haritha Keralam logo using polyvinyl sticker of size 450 mm x 450 mm with adhesive backing including printing charges and fixing properly at a place directed by the concerned engineer in charge. |
| 17 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | od200137/2020_2021 : Supply and providing engraved granite sign board 2D,Black colour ,Thickness 8-10mm includes engraving 150 letters( approximately),plastering ,labour charges etc including fixing properly at a place directed by the concerned engineer in charge |
| 19 | Appendix-B-Electrical work |
| 20 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C |
| 21 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 22 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 23 | 1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 24 | 90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories andlamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copperconductor flex wire or extending the original wiring and giving connections as required |
| 25 | od200125/2020_2021 : Supplying, conveyance ,installation, testing, and commissioning of Pedestal fan of good quality having 55 watts, sweep size -450mm and a speed of 1400 rpm -Preferably Crompton or equivalent |
| 26 | Appendix -C-Equipments |
| 27 | od200117/2020_2021 : Supplying and providing ready to use H2S strip bottles of Glass type container having 20ml volume and incubation period of 24 to 28 hours for testing the presence of undesirable amount of coliform bacteria in water sample in the individual schools as mentioned. |
| 28 | od200120/2020_2021 : Supplying and providing a sterilized plastic bottle of capacity 100ml graduated made oflaboratory-grade plastic, screw-cappedfor collecting the bacteriological sample in the individual schools as mentioned |
| 29 | od200130/2020_2021 : Supplying and providing Beaker of capacity 100ml, borosilicate graduated in the individual schools as mentioned |
| 30 | od200131/2020_2021 : Supplying and providing 250gm Sodium thiosulphate (dechlorinating agent)-White crystals, reagent grade in the individual schools as mentioned. |
| 31 | od200132/2020_2021 : •Supplying and Providing Multiparameter Water Quality Analyser for testing PH, TDS,and EC with following specifications,PH Range:0.00 to 14,PH Resolution: 0.01,PH Accuracy:+/-0.01,EC Range 0 to 20 ms,EC Resolution: 0.01ms,EC Accuracy :+/-1,TDS Range:0 to 100 ppm,TDS Resolution:0.1ppm,TDSAccuracy:+/- 1 and having sensor type :PH/EC/TDS, Non-Volatile memory ,Auto OFF option, Temperature Compensation ATC/MTC,Dual LCD,Waterproof IP67 and Auto Buffer recognition including one year sufficient calibration standards . |
| 32 | od200133/2020_2021 : Supplying and providingWater testing kit (color comparator kit) for the estimation of Ammonia, Nitrate, and Nitrite present in water which contains Nitrate reagent 50gm, Nitrite reagent 50ml, Nitrate reagent 50ml, Ammonium reagent 100ml,20ml Test tube 2Nos,10ml Measuring cylinder, 3ml Dropper, Test tube Brush, Spatula including color indicating chart in the individual schools as mentioned. |
| 33 | od200135/2020_2021 : Supplying and providing Double distilled water (ddH2O) 10 litres, having boiling point 1000C, Melting point 00C, Specific gravity 1.00, Odourless, Colourless clear liquid in the individual schools as mentioned |
| 34 | Appendix D-Stationaries |
| 35 | od200112/2020_2021 : Suppling and providing Toilet paper roll-100gms,1 Roll (2ply,minimum 125 sheets) less than 80 GSM in the individual schools as mentioned in the name of work |
| 36 | od200113/2020_2021 : Supplying and providing A4 sheet paper bundle,whitw 500 sheets in the individual schools as mentioned in the name of work. |
| 37 | od200115/2020_2021 : Supplying and providing of Report files Plastic,A4size in the individual schools as mentioned in the name of work |
| 38 | od200118/2020_2021 : Supplying and providing of Pen-blue or black ball point pen in the individual schools as mentioned in the name of work |
| 39 | od200121/2020_2021 : Supplying and providing Paper clip board-wooden A4 size(330mmx228mmx3mm) in the individual schools as mentioned in the name of work |
| 40 | od200123/2020_2021 : Supllying and providing Permanent markers-black/blue ink,fine tip,Marks on metal,OHP sheets ,plastic,glass and ceramics.Water resistant in the invidual schools as mentioned in the above work |
| 41 | od200126/2020_2021 : Supplying and providing Soap of Approved Brand in the individual schools as mentioned in the name of work. |
| 42 | od200128/2020_2021 : Supplying and providing premium quality cotton hand towel . <br>Super Absorbent, 100% Cotton, Quick Dry,Hydro OrganicaHD Technology of required colour100% COTTON,400 GSM of size 400mmx600mm<br> |
| 43 | od200129/2020_2021 : Supplying and providing Alcohol-based hand sanitizer, with alcohol content of 60-80%, and capacity of 200ml of Approved brand <br> |
