Road And Building Department-RBD has published special repair To Boys High School At Kuchinda Such As Renovation Of 4 Nos Of Class Room With Replacement Of Sheet, Repair Of Flooring, Painting For The Year 2021-22 Building Works. Submission Date for this Tender is 25-11-2021. Building Work Tenders in Kuchinda Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling GCI / A.C. sheet roofing after careful removal of the bolts and nuts including stacking the materials for reuse and removing the debris within 50M lead as directed by Engineer-in-charge. |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3M heights including stacking the useful materials for reuse and removing the debris with 50M lead as directed by Engineer-in-charge. |
| 3 | Dismantling and removing doors, windows and ventilators including removal of frames, hinges, fastenings and stacking the same for reuse and removing the debris within 50M lead as directed by Engineer-in-charge. |
| 4 | Removing old lime or cement plaster from walls including raking out joints 12mm deep (1/2”) and removing the debris within 50M lead as per direction of Engineer-in-charge. |
| 5 | Fly ash brick masonry in cement mortar (1:6) in Superstructureusing fly ash bricks of23cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour and T&P required for the work complete in all respect in all floors as per specification and direction ofEngineer-in-charge |
| 6 | Supplying filling in foundation and plinth with sand including watering ramming, in 22.5 cm thick in layer includincost, conveyance, royalties and allmaterials and cost of labour with T & P required for the work etc. |
| 7 | Cement concrete (1:3:6) in foundation and floors i.e., below the base course of terrazzo flooring using 4 cm (1 ½ “) size black hard crusher broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc. complete to required levels laid in layers not exceeding 0” – 6” thick including cost, conveyance, royalties and all materials and cost of all labour with T & P required for the work complete. |
| 8 | R.C.C. work of Grade-M20 in following work using20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, & all of materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. |
| 9 | Lintel |
| 10 | Chajja |
| 11 | Straightening bent up or coiled M.S. rod or uncoated HYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge. |
| 12 | Supplying fitting fixing of M.S. pannelled door single leanved shutter with M.S. frame with 1 mm thick CR sheet approved design and drawing as directed by Executive-in-chargeincluding the cost, conveyance, all materials & cost of all labour with T&P required for the work etc. complete in all respects |
| 13 | Labour charges of fixing doors and windows etc all complete |
| 14 | 16mm (5/8”) thick cement plaster (1:6) in finishing smooth to inside rough surface of 10” thick brick walls after racking out the joints including watering and curing with cost, conveyance, royalty,of all materials and cost of all labour with T & P required for the work etc. complete |
| 15 | Painting with two coats of WEATHER SEAL COAT (I.S.I.) of approved shade by means of brush / sprayers to outside surface of walls after cleaning the surface etc. complete in all floors including the cost, conveyance, & cost of all labour with T&P required for the work etc. complete in all respects |
| 16 | Supplying, fitting and fixing vitrified tiles in floors of premium grade having thickness 8mm to 10mm confirming of approved make to IS:13756 laidin Wall / dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointedwith neat cement slurry etc. complete including cost of all material, labour T&P etc. required for the work all complete as per direction of the Engineer-in- charge. |
| 17 | Painting 2 coats with Plastic Emulsion paints of approved shade by means of brush tosurface of walls after cleaning the surface etc. complete in all floorsincluding cost of all materials withand cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. |
| 18 | Finishing wall surface of walls acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete. |
| 19 | Priming one coat to wall surface with water bound cement primer including all labour, materials T & P for etc, complete |
| 20 | Providing fitting and fixing of false ceilings with Aluminium anodised T Section No. 3215 with 2"-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2"-0"x2"-0" suspended from ceiling etc complete as per direction of Engineer -in –Charge. |
| 21 | Painting Two coats with Synthetic enamel paintof approved shadein all Iron/wood work including sand papering, polishing the surface, including cost, conveyance, royalties and all materials along with T&P required for the work including cost of paints etc. complete in all respects. |
| 22 | Supplying, fitting, fixing of Vitrified Tiles (approved size premiumIndustrial grade ) floor treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the iles including rubbing and polishing etc. completeincluding cost of all material, labour T&P etc. required for the work all complete as per direction of the Engineer-in- charge. |
| 23 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) sliding windows of FENESTA / NCL or equivalent three track - only two glass shutters sliding duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm or equivalent for outer frames, 58mm x 39mm x 2.5mm or equivalent for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glassofSAINT-GOBAIN or reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge., |
| 24 | Supplying, fitting and fixing Durasine colour coated0.45 mm TATA brand . sheet in roofing including fixing of ridges, wind ties, J.hooks, G.I. and limpet washers, bolts and nuts drilling in wind ties including cost, conveyance, of all materials with all labour andT&P etc. complete |
| 25 | Removing debris away from work site by mechanical means and disposing of the same 5 Km. away from the work site including loading and unloading as per directed by Engineer-in-chage etc. complete in all respect. |
| 26 | Recessed wiring to light/ fan/ exhust fan/ call bell point with 1.5 sqmm FR PVC insulated S/C M.C Copper conductor in 20 mm dia PVC non-Metalic pipewith S/F of 3Amp 250V piano type Point switch ISI marked along with 5 sqmm S/C coper running earth wire including all acessories and connection (Make of Havels/ HPL/ Great White/ V-Guard) |
| 27 | (i) Group- A |
| 28 | (ii) Group- B |
| 29 | (iii) Group- C |
| 30 | Recesed wiring submain in PVC conduit with earth wire PVC inculated S/C M.S. Copper wire in 20mm in PVC flexible conduit |
| 31 | i) 2 X 1.5 sqmm + 1 X 1.5 sqmm |
| 32 | ii) 2 X 2.5 sqmm + 1 X 1.5 sqmm |
| 33 | iii) 2 X 4 sqmm + 2 X 1.5 sqmm |
| 34 | S/F of B.K. Angle Holder with out bulb. |
| 35 | S/F of 48/56"sweep ACceiling fan (make Usha Allore /Bajaj Elegance/ Crompton GreevesHigh breeze.) |
| 36 | Supply and fixing of stepped type electronic fan regulate on the existing switch box including connections as requred. |
| 37 | Supply and fixing of 25 Watt STreet Light with GI Bracket ( Make of CG/ Philips/ Halonix) |
| 38 | Supply and fixing of 15 Watt Bulb (Make -Havels model adora or its equivalent to Surya/ Halonix/ Bajaj/ Crompton/ Philips/ Jaguar/ Wipro/ Panasonic) |
| 39 | Supply and fixing of 20 Watt LED Tube Light |
| 40 | Supply and fixing of 4Way SP MCB Box (Make- Legrand or its equivalent to Hager/scheinder/siemens) |
| 41 | Supply and fixing of 6-32Amp Single Pole MCB (MAKE Legrand model DX3 MCB or its equivalentto Hager / Siemens ) |
| 42 | Supply and fixing of 32Amp ICDP Main Switch 240 V (Make of Havels/ HPL/ Anchore) |
| 43 | Supply and fixing of40 MM Gi Pipe Earthing as per Govt. Specification. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
