Public Works Department-PWD has published Construction Of Skill Development Center At Patehra Kalan District Mirzapur Building Tender. Submission Date for this Tender is 23-11-2021. Building Work Tenders in mirzapur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | EXCAVATION infoundation inordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer I/C within a lead of 30 m.from foundation trenches. |
| 2 | Earth work in cutting or embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 m (20") in depth and earthwork in embankment to be in 20 cm (8") layers, including ramming & dressing the surface to required lvls and slopes and also including 1.5 m (5 fts.) lifts and 30 cm (100") lead. The earth from cutting to be used in making embankment orto be deposited as spoils banks within 30 m distance as directed by the Engineer Incharge. |
| 3 | Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.All kinds of soil |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering, dressingetc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work. |
| 5 | Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. |
| 6 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 7 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. |
| 8 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 9 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measuredas per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m.(4) treatment of soil along external parameter of building 7.50 lire per sq.m. |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level |
| 11 | All works above plinth level upto floor V level |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 13 | Suspended floors, roofs, landings, balconies and access platform |
| 14 | Shelves (Cast in situ) |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | Stairs, (excluding landings) except spiral-staircases |
| 18 | Under 20 cm wide |
| 19 | Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. |
| 20 | Class-150 brick work in 1:6 cementand COARSE sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work. |
| 21 | Class-150 brick work in 1:6 cementand COARSE sandmortar in SUPERSTRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the workGround Floor |
| 22 | FFTERRACE |
| 23 | Class-150 reinforced HALF brick work in 1:4 cementand COARSE sandmortar in SUPERSTRUCTURE including supply of all materials, labour tools and plants, etc. |
| 24 | Providing and fixing ISI marked S.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 25 | Providing and fixing ISI marked S.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250X10 mm |
| 26 | Providing and fixing ISI marked S.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 27 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 28 | Providing and fixing aluminium dye casttubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80 kg and door width from 700 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 29 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) |
| 30 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 |
| 31 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 32 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides |
| 33 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 34 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of workFabrication of Tubular-Section openable steel windows, Grill&Elevational work including necessary steel fitting such as handles stay etc. Mild steel or iron work in heavy sizes such as trusses, builtup gates, doorframes record racks, roof work, gates etc.wrought to required form including drilling holes, riveting or welding where necessary and also including supply of steel, bolts, nuts etc. and their fixing requiredfor proper completion of work. |
| 35 | Fabrication and supply of T-iron 40X40X5 mm door/window chaukhat frame including cost of steel, all carriage welding cutting,labour, grinding smooth finishing, staple plate 6mm thick welded in black flange at hinges cost of 14 guage hinges for 100 & 75 mm and 16 guage hinges for 100 & 75 mm and 16 guage hinges fo 50 mm size including all drilling, machine threading all screws, nuts bolts arrangement for locking of tower bolt, tie rod, hold fasts made of 25X3 mm flat iron 15 cm long complete job including applying of one coat of red oxide steel primer paint required for proper completion of work as per direction of Engineer in charge. Standard weight or actual weight whichever is less shall be paid. |
| 36 | Supply and fixing mosquito proof jali having 5 mesh each cm made of 24 BWG wire heavy quality and includng cost of 25X5 mm flat iron around the jali, welding complete. |
| 37 | Fixing of steel or wooden chaukhat in position(a) Door/Window Chaukhat above 1.5 sqm |
| 38 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes |
| 39 | 5.5 mm thick glass panes |
| 40 | Providing and fixing in position collapsible steel shutters with vertical channels 220x10x2mm. (3/4"x3/8"x1/12") and braced with flat iron diagonals 20x5mm. (3/4"x3/16") size with top and bottom rails of T-iron 40x40x6mm (1-1/2"x1-1/2"x1/4") with 38mm dia steel pulleys with bolts nuts locking arrangement stoppers, handles complete including applying a priming coat of approved red lead paint |
| 41 | Supply and fixing of 24 guage Aluminium sheet on toilet door shutters bottom including fixing with Aluminium Greeves, including labour T & P etc. required for propper completion of the work. |
| 42 | Providing and fixing glass strips in joints of 3.15 mm (1/8") thickness in joints of floors & skirtings at the time of laying floors flush with level, including labour and T & P etc. complete. (iii) of 40 mm depth |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble area of slab over 0.50 sqm |
| 44 | Providing edge moulding to 18 mm thick Granite stone, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 45 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 46 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 47 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 48 | Providing and laying vitrified floor tiles Kajaria KERRO brand or equivalent brand of super quality in different size (Thickness specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 49 | 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 50 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Using ordinary cement. |
| 51 | 12 mm cement plaster in single coat on smooth/rough side of single or half brick wall for interior plastering including brick wall for internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no. extra for mixing and additive. (iii) 1cement :6 C. sand ON INNER SURFACE |
| 52 | 12 mm thick plaster with cement mortar in proportion of 1:6 cement and sand of 1.25 FM on single or half brick wall along with making drip coarse and grooves in External plaster |
| 53 | 12 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 cement: 3 course sand in ceiling.GF |
| 54 | FF TERRACE |
| 55 | Providing and mixing water proofing material in cement mortar for plastering or in concrete work in the proportion recommended by manufacturer. |
| 56 | Wall painting (Two coats) with plastic emulsion paint of first quaity approved brand and manufacturer on undecorated wall surface to give even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared amooth. |
| 57 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 58 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 59 | Painting or varnishing on iron work in small areas on new wood work with one coat of ready mixed priming paint and one coat of approved superior quilty ready mixed paint of clear synthetic varnish including suply of all material, labour and T & P etc. required for proper completion of the work. Paint to be used should conform to the I.S.I No. 103 -1950. |
| 60 | Finishing walls with waterproofing cement paint of approved make and quality on new work with two coats to give an even shade including supply of all material labour and T & P etc. required for proper completion of work. |
| 61 | Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide |
| 62 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terracesetc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 63 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 64 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 65 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction / expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-incharge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine |
| 66 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 67 | Providing and fixing in position pre-moulded joint filler in expansion joints. |
| 68 | Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade "A" sealing compound. |
| 69 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 70 | Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth |
| 71 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink with drain board |
| 72 | 610X510 mm bowl depth 200mm. |
| 73 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 74 | Providing and fixing toilet paper holder : |
| 75 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 76 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 77 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge |
| 78 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 79 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(sink & urinal) |
| 80 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. |
| 81 | Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 82 | Providing and fixing CP Brass shower rose with 15 or 20 mm inlet 100 mm diameter |
| 83 | Providing & fixingPTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms |
| 84 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 85 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore |
| 86 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15mm nominal bore |
| 87 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. |
| 88 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32mm Dia |
| 89 | Providing and fixing uplasticised PVC connection pipe with brass unions 15 mm nominal bore |
| 90 | Providing and fixingcast iron trap of self cleansing design withcast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and100 mm outlet Sand cast iron S & S as per IS: 3989 |
| 91 | 100 mm inlet and75 mm outlet Sand cast iron S & S as per IS: 3989 |
| 92 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 93 | Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. |
| 94 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 95 | Providing and fixing plain bend of required degree. |
| 96 | Providing and fixing double equal plain junction of required degree. |
| 97 | Providing and fixing single equal plain junction of required degree : |
| 98 | Providing and fixing single unequal plain junction of required degree |
| 99 | Providing and fixingcast iron S & S offsets as per IS : 3989 |
| 100 | Providing and fixing terminal guard: |
| 101 | Providing and fixing Collar: |
| 102 | Providing and fixing PTMT grating of approved quality and colour |
| 103 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)alround CI HUBLESS includingbed concrete as per standard design |
| 104 | Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work)40 mm dia, nominal bore |
| 105 | 50 mm dia, nominal bore |
| 106 | Painting with synthetic enamel paint of approved drand and manufacture to give an even shadeTwo more coast on new work |
| 107 | P/F M.S. cap 100 mm dia |
| 108 | Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS:13592 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for thermal expansion. (i)Single socketed pipes. 110 mm diameter |
| 109 | Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion. Coupler -110 mm diameter |
| 110 | Bend -87.5 deg -110 mm diameter |
| 111 | Shoe -110mm shoe |
| 112 | Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete. |
| 113 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. |
| 114 | Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 15 mm nominal outer dia pipes |
| 115 | 20 mm nominal outer dia pipes |
| 116 | 25 mm nominal outer dia pipes |
| 117 | 32 mm nominal outer dia pipes |
| 118 | 40 mm nominal outer dia pipes |
| 119 | 50 mm nominal outer dia pipes |
| 120 | Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes |
| 121 | 20 mm nominal outer dia pipes |
| 122 | Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work)25 mm dia, nominal bore |
| 123 | 32 mm dia, nominal bore |
| 124 | 40 mm dia, nominal bore |
| 125 | 50 mm dia, nominal bore |
| 126 | Painting with synthetic enamel paint of approved drand and manufacture to give an even shadeTwo more coast on new work |
| 127 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore |
| 128 | 32 mm dia, nominal bore |
| 129 | 40 mm dia, nominal bore |
| 130 | 50 mm dia, nominal bore |
| 131 | Providing and fixing gun metal non- return valve of approved quality (PN 1.6) 40 nominal bore Horizontal |
| 132 | 50 nominal bore Horizontal |
| 133 | Providing and fixing brass stop cock of approved quality15mm nominal bore |
| 134 | 20mm nominal bore |
| 135 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 136 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 137 | BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 65 nominal bore |
| 138 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 139 | Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). |
| 140 | Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage) 150 mm dia RCC pipe |
| 141 | 250 mm dia RCC pipe |
| 142 | Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size) |
| 143 | Constructing brick masonry manholewith F.P.S.bricksin cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4gradestone aggregate 20mm nominal size); foundation concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 gradedstoneaggregate40 mm nominalsize) insideplastering 12 mm thickwith cementmortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and makingchannels incementconcrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat ofneatcement completeasper standard design Inside size 90 x 80 cm & 45 cmdeep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not lessthan 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) with FPS bricks with class designation 7.5 |
| 144 | Extra for depth formanhole with F.P.S. bricks size 90 X 80 cm with FPS bricks withclass designation 7.5 |
| 145 | Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming IS : 4885 |
| 146 | Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With Sewer bricks conforming IS : 4885 |
| 147 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 148 | Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber with bricks of class designation 75 and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design.(COVER MIN. 4.5 KG & FRAME MIN.2.7 KG ) 180x150 mm size P type With FPS bricks |
| 149 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 250mm dia. |
| 150 | Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage) 150 mm dia RCC pipe |
| 151 | 250 mm dia RCC pipe |
| 152 | 300 mm dia RCC pipe |
| 153 | Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size) |
| 154 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 fine sand) including 500 x 450 mm (heavy duty) precast RCC horizontal grating with frame complete as per standard design: |
| 155 | Wiring point for light point with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, modular switch, modular plate, suitable GI box etc. as required. |
| 156 | Wiring point for fan / fresh air fan(light duty exhaust fan) with 1 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, modular switch, modular plate, suitable GI box etc. as required. |
| 157 | Add for light/ fan points with modular type switch in place of piano type switch |
| 158 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 159 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 160 | Supply and wiring of submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with one no. 14 SWG copper earth continuity wire etc, complete in all respects including matching colour wash. |
| 161 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy duty (2mm thick) PVC conduit on surface, with one number 14 SWG copper earth continuity wire etc, complete in all respect. |
| 162 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. |
| 163 | Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. |
| 164 | Supply and wiring of 4 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25 mm diaheavy duty (2mm thick) PVC conduitpartly concealed in wall and partly laid in slab number 14 SWG copper earth continuity wire including matching colour wash etc, complete in all respect. |
| 165 | Supply and wiring of 4 number 10 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab number 10 SWG copper earth continuity wire including matching colour wash etc, complete in all respect. |
| 166 | Supply and wiring of 4 number 16 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 40 mm dia heavy duty (2mm thick) PVC conduitpartly concealed in wall and partly laid in slab number 10 SWG copper earth continuity wire including matching colour wash etc, complete in all respect. |
| 167 | Wiring point for 5 Amp. plug with 1.5 sq.mm. FRLS PVC insulated multistrand single core coper conductor cable in PVC conduit pipe partly concealed in wall and partly laid in slab alongwith the reinforcement befofre concreting, complet with 14 SWG copper earth continuity wire and piano type switch & socket etc., complete in all respect including matching colour wash |
| 168 | Add for plug point with modular type switch & socket in place of piano type switch & socket |
| 169 | S & F of power plug with 20A/ 250 volt flush type modular switch and 5 pin 20A/ 250 volt flush type universal modular socket on concealed M.S. box including supply of all material, labour T &P etc. required for proper completion of work. |
| 170 | Supplying and laying of 25 mm dia heavy duty (2 mm thick) PVC conduit complete with bend and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting, and plastering etc. complete in all respect. |
| 171 | Supplying and laying of 32 mm dia heavy duty (2 mm thick) PVC conduit complete with bend and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting, and plastering etc. complete in all respect. |
| 172 | Supply and fixingof recess/Surface/Pendent mounting round 6 Watt to 8 watt LED Down Lighter having Powder coated die cast aluminium housingwith heat sink, diffuser/Reflector and driver set complete in all respect. (CAT-AAA) |
| 173 | Supply and fixingof recess/Surface/Pendent mounting round 12 Watt to 15 watt LED Down Lighter having Powder coated die cast aluminium housingwith heat sink, diffuser/Reflector and driver set complete in all respect. (CAT-AAA) |
| 174 | Supply and fixingof LED Tube Lightwith batten suitablefor upto 1 X 20 watt LED Ba tten tube light complete includingtube etc on surface complete in all respect. (CAT - AAA) |
| 175 | Supply and fixingof LED Tube Lightwith batten suitablefor upto 1 X 10 watttube light as a Mirror Light complete includingtube etc on surface complete in all respect. (CAT-AAA) |
| 176 | Supply, installation, connecting, testing and commissioning of illuminated exit sign with 1 x 6 watt LED lamp including providing maintenance free batteries & charger capable of working for 2 hr duration mounted on ceiling/wall complete with the approved EXIT self adhesive labels as per site requirement as required including connection with 1.5 sqmm FRLS PVC insulated copper conductor similar to Prolite or equivalent |
| 177 | Supplying, erection, connecting, testing and commissioning of 1200mm sweep ceiling fan complete with blades, down rod, shackle insulator, canopy etc. including providing of electronic step regulator with faceplate matching the existing modular switches as required,Including connection with 1.5 sqmm FRLS PVC insulated copper conductor. |
| 178 | Supplying, erection, connecting, testing and commissioning of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. a) 305mm 1400 RPM |
| 179 | S & F surface/ flush mounting 8 way TPN distribution board with additional metal door with out MCB complete in all respect, as directed at site by Engineer in charge. (CAT A) |
| 180 | S&F of 40 Amp. 4 Pole. Isolator (CAT - A) |
| 181 | S&F of 63 Amp. 4 Pole Isolatore (CAT - A) |
| 182 | S & F 6 amp. To 32 amp. SPMCB (10KA) C curve |
| 183 | Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. |
| 184 | Supply and burying of600 mm X 600 mm X 6 mmGI Plate vertically for earthing with its top at least 3 meter below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one No. 8 to 10SWG GIwire in 15 mm dia G.Ipipe and GI wire will be extra ) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal/coke/ and salt at least 150 mm thick around etc. as per directions of Engineer-in-charge complete in all respect s as per Drawings |
| 185 | Supply and burying of600 mm X 600 mm X 3 mmcopper plate vertically for earthing with its top at least 3 meter below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one No. 8 to 10SWG GIwire in 15 mm dia G.Ipipe and GI wire will be extra ) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal/coke/ and salt at least 150 mm thick around etc. as per directions of Engineer-in-charge complete in all respect s as per Drawings |
| 186 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 187 | Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. |
| 188 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required |
| 189 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required |
| 190 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 191 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 192 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site |
| 193 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 194 | Supply and burying earth electrode for lighting conductor of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineerin- charge complete in all respect |
| 195 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineerin-charge. |
| 196 | Supply and fixing of vertical air termination final rod comprising of 300mm long x 25mm dia. Copper rod with one pointed prong and 100mm dia x 3 mm thick base plate etc. complete in all respect. |
| 197 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.. |
| 198 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 199 | Providing, laying, connecting and testing of multi-core telephone armoured cable of conductor size 0.63mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable along wall or ceiling or through existing pipe. |
| 200 | Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted. |
| 201 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required |
| 202 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet |
| 203 | TV antenna socket outlet |
| 204 | Providing, laying, connecting and testing of unarmoured TV cable RG-6 PVC insulated cable along wall or ceiling or through existing pipe. |
| 205 | Supply, laying of one number PVCinsulated and PVC sheathed / XLPE Al. armoured power cables 1100 Volts grade of following size direct in hdpe pipe / cable tray / ground / duct /trench including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. 3.5 x 25 sq.mm |
| 206 | 4 x 16 sq.mm |
| 207 | 4 x 10 sq.mm |
| 208 | Supplying and fixing of brass nickle plated compression gland for PVC insulated andarmouredserved sheathed ,underground cable including rubber ring etc.complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of the Engineer -Incharge. 3.5 x 25 sq.mm |
| 209 | 4 x 16 sq.mm |
| 210 | 4 x 10 sq.mm |
| 211 | Supplying and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads , insulating with tape and making connection etc. complete in all respect as per direction of the Engineer -Incharge. 25 sq.mm. |
| 212 | 16 sq.mm |
| 213 | 10 sq.mm |
| 214 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. |
| 215 | Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-10025S-355J or ASTM-572A (GR-50)) and thickness of galvanization (70mm thick) conforming to IS:2629/ IS:2633/ IS:4759, BSEN-ISO-1461- 1991ORASTM-A123/A123M-02.Thepole shall be in single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The octagonal pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level as required:- Galvanized Octagonal Pole Overall Length 7 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 130mm, Foundation size below G/L 550mm x 550mm x 1400mm, 4Nos. Foundation Bolts size 20mm dia., Length=700mm with Base Plate Dimensions 240mm x 240mm x 16mm Thick |
| 216 | Supply and fixing of ornamental brackets for 7 Mtr Pole. Make-Twinkle Lite TLB-10-15901 |
| 217 | Supply and fixing of 90 Watt LED Street light Fitting having Luminaire made of aluminium housing duly powder coated / PU painted with PC / PMMA Clear . Confirming to IP 66 Protection complete in all respect. Make-Twinkle Lite - 609 (PT-90) |
| 218 | Supply and fixing following capacity 40Amp TPN of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 219 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core Mtr. |
| 220 | 25 sq. mm 3-1/2 core Mtr. |
| 221 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm 4 core Mtr. |
| 222 | 25 sq. mm 3-1/2 core Mtr. |
| 223 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm |
| 224 | 25 sq. mm |
| 225 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 226 | Supply and laying of 25mm x 3mm G.I. strip from earthelectrode directly in the ground as required complete in all respect. |
| 227 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
