|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete. |
| 2 | M&L for brick work with old size sub class \"B\" bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed |
| 3 | M&L for brick work with old size sub class \"B\" bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed |
| 4 | M&L for rendering 15mm thick in CM 1:6 on brick walls finished over and fair without using extra cement complete all as specified and directed |
| 5 | Demolition of concrete/tiles/kota etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed |
| 6 | M&L75 mm thickcement concrete 1:3:6 type C-2 (40mm graded aggrete) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed. |
| 7 | S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 15mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | M&L for non skid joint free coloured ceramic tiles8 mm thick (square/ rectangular) areaof each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 11 | S&F 18 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer - in -charge. Make: Rajshri or equivalent |
| 12 | S & F in repairs18 mm thick Celuka ply of grade 1 quality of one side prelaminated and other side plain white colourto make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer - in - charge.Make_Rajshri or equivalent |
| 13 | S & F in repairs 12 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent. |
| 14 | S & Fauto closing hinges 35 mm of 0 crank OR8 crank openable at 110 degree for kitchen cabinet shutters,make KAFF or equivalent |
| 15 | S & F Ball bearing runners 45 mm Telescopic , full extension load capacity 50 kgs, make KAFF or equivalent. |
| 16 | S & Fstainless steel handles 100 mm size for kitchen cabinet shutters. |
| 17 | S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge. |
| 18 | S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge. |
| 19 | S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge. |
| 20 | S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge. |
| 21 | S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge. |
| 22 | S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etccomplete all as specified and directed by Engineer-in-charge. |
| 23 | S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge. |
| 24 | S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge. |
| 25 | Demolition of RCC of any description and in any position complete all as specified and directed. |
| 26 | M & L for precast cement concrete type B 1 1 : 2 : 4 in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed. |
| 27 | M & L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 28 | S&F granite( of any type) stone slab of20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. |
| 29 | M&L 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- prayag) hoisted and fixed in position all as specified in SSR Part I.and including Dismantling of water tanks 1000 ltrs of capacity and removing to store complete all as specified and directed. |
| 30 | M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- prayag) hoisted and fixed in position all as specified in SSR Part I. and Dismantling of water tanks 500 ltrs of capacity and removing to store complete all as specified and directed. |
| 31 | S&F /in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 mm - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 32 | S & F in repairs of 15 mm bore size PVC, PTMT bib tap complete all as specified and directed. (Make : Prayag/ Polytuf/Symat). |
| 33 | S&F in repair15mm dia Stop/ angle valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) |
| 34 | S&F in repair20mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) |
| 35 | S&F in repair15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) |
| 36 | S & Fbrass CP mixer ( basin mixer) for mixing hot & cold water screwed down for 15 mm dia iron pipe complete all as specified and directed (Model : 8951 Make : PrayagOR EQUIVALENT RANGE OF Jaquar, JOHNSON). |
| 37 | S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm borefancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (MODEL : TQT - 511, Make : ESSCO, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON). |
| 38 | S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON). |
| 39 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets forbottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed (Make : Hind ware/ Cera / Parryware/Commander). |
| 40 | S & F vitreous china squatting pan(Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floorfixed in repair size 580x440mm white glazed with integral footrest with \"P\" or \"S\" trap complete (excludingflushing cistern and flush)complete all as specified and directed. Make : Parry ware/Hind ware/HR Johnson. |
| 41 | S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed. |
| 42 | S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl \"P\" or \"S\" trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed. |
| 43 | S & Fplastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. (Make : Parryware/ Hindware). |
| 44 | S & F of stainless steel jet cleaner for ‘E’ type WC with flexible pipe. |
| 45 | S & F Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed (Model : ALD-573, Make : Jaguar OR EQUIVALENT RANGE OF MARC, JOHNSON). |
| 46 | S & F in repairs CP toilet paper holder complete all as specified and directed. Make : Jaguar / Marc / Johnson. |
| 47 | Supply and fixing of 750 mm long PVC waste pipe suitable for 32 to 40 mm size waste coupling. |
| 48 | S & F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed. |
| 49 | S & F in repairs mild steel chromium plated grating (round) 125 mm dia fixed in cement mortar 1:3 over floor/nahani trap (with hole or without hole) complete all as specified and directed. |
| 50 | S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified.(Make : Hindware/Cera- Ist quality). |
| 51 | Ditto but with pedestal and any colour as approved complete all as specified and as directed. |
| 52 | S&F15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed(Model : 8903 Make : PrayagOR EQUIVALENT RANGE OF Jaquar, JOHNSON). |
| 53 | S&F15mm bore PVC connection 450mm long complete and all as specified and directed |
| 54 | S & F in repairs PVC connection 600 mm long with 2 Nos brass check nuts suitable for 15 mm bore of pipe with washer complete all as specified and directed. Make : Prayag / Symet / Polytuf. |
| 55 | S&F in repairsCI floor trap 100mm dia with CP grating including jointing to waste pipe complete all as directed. |
| 56 | S&F in repairs CP brass shower rose 125mm size shower with 300mm arm suitable for 15mm bore pipecomplete all as specified.(Make : Prayag cat No. BS-79S) |
| 57 | S & F in repair wall mixer with \"L\" bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7911-F) |
| 58 | S&F in repair 15 MM bore concealed stop valves long shank and cup cast copper allow chromium plated fancy type screwed down high pressure, with capstan handle long shank screwed both ends all as specified. |
| 59 | S&F in repair Curtain rod Aluminium coloured powder coated fancy type curtain rod 20 to 25mm dia complete all as specified and directed . |
| 60 | S&F ofBrackets suitable for fancy type curtain rod ( Make - Flywell ) complete all as specified and directed . |
| 61 | S&F of fancy nobe for curtain rode suitable to fix to curtai rode.( Make - Flywell ) complete all as specified and directed . |
| 62 | S&F Kitchen sinks with drain board made of stainless steel 1 mm thickwith plugs washers & wastes including bedding in cement mortar to dwarf wall or incl. fixing cantilever brackets & connected to pipe , size overall 915 x 460 mm& bowl size 410 x 330mm complete and all as specified and directed. |
| 63 | S&F of bevelled edge looking mirror of size 600x450mm of selected quality with chromimum plated brass screwed and washer complete and all as specified and directed. |
| 64 | S&F Cabinet Mirror (400mm x 500mm) complete all as specified.(Make : Prayag Cat No.554) |
| 65 | M & L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required and including taking down complete all as specified complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH. |
| 66 | M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc,complete all as specified incl taking down complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH. |
| 67 | Refixing old steel 15mm dia steel tubingand connections in new or old position (Walls, ceiling floors, etc) and including Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete. |
| 68 | Refixing old steel 20mm dia steel tubingand connections in new or old position (Walls, ceiling floors, etc) and including Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete. |
| 69 | Cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etc complete all as specified and directed |
| 70 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint |
| 71 | M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemperover 1 mm thick wall care putty complete all as specified & directed. |
| 72 | M & L for preparation of newly plastered surface of wall and applying two coats of white wash complete all as specified & directed. |
| 73 | M & L for new plastered surface on walls and applying two coats cement based paint over one coat of alkali resistant priming paint complete.( Make : Snowsem/Durocem/Crimocem) |
| 74 | M & L for taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc and providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extracement) complete all as specified and directed. |
| 75 | M & L for taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc and providing 15 mm thick rendering with cement mortar 1 : 4 finished even and smooth (without using extracement) complete all as specified and directed. |
| 76 | M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified |
| 77 | Dismantling timber framed scantlings 40 sq. cm and over in section, in any positioncomplete as specified and directed by Engr-in-Charge |
| 78 | Dismantling of iron complete as specified and directed by Engr-in-Charge |
| 79 | S&F rolled mild steel in joist, channel, angle or tee sections fixed independently , without connecting plates etc quality conforming to Fe 410 W (Gde E-50 quality A) including dismantling of iron complete as specified and directed by Engr-in-Charge |
| 80 | Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering. |
| 81 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed. |
| 82 | M&L 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 83 | S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge |
| 84 | S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge |
| 85 | Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness |
| 86 | M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC.Make:- Everest / Armstrong / Gypsum India Ltd. |
| 87 | Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 88 | -Ditto- but n.exc 1.5m2 each -ditto-. |
| 89 | Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each . |
| 90 | S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed. |
| 91 | S&F IInd class hard wood (sal) plain.solid straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints |
| 92 | S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. |
| 93 | Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required |
| 94 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 95 | S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat. |
| 96 | S&FII nd class HW, 35 mm thick plain framed Factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated. |
| 97 | S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete. |
| 98 | S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC \"C\" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete |
| 99 | S&F anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge. |
| 100 | S&F anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engineer in Charge. |
| 101 | S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed. |
| 102 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge. |
| 103 | S&F Anodised aluminium grill or guard bars fixed to aluminium window, weight not less than2.82 kg/Sqm complete all as specified incl powder coating with powder coated colour as approved by GE complete all as specified and directed by Engineer -in- Charge. |
| 104 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge. |
| 105 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm |
| 106 | - do - but in repair. |
| 107 | S & F 150 mm longfloor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door. |
| 108 | S&F 150mm ordinary helical door spring incl. roller and roller plate \"make : Ritz.\" |
| 109 | S&Fbutt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed. |
| 110 | S&Fbutt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed. |
| 111 | S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI markedall as specified. |
| 112 | S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI markedall as specified. |
| 113 | S&F for aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed. |
| 114 | S&F for aluminiumanodized barrel tower bolts 150 mm of extruded section and fixed. |
| 115 | S&F 250mm long alumn.alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified |
| 116 | S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 117 | S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 118 | S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete |
| 119 | S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 |
| 120 | S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 121 | S & F as in repair 3mm thick ordinary quality glass pane and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified. |
| 122 | M&L 75mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in sub base etc. |
| 123 | M&L for Hardcore of gauge n exc. 63mm with broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface |
| 124 | M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sandmade with grey cement and pigment complete all as specified and directed (Make:-ECO/KRISHNA/TULIP |
| 125 | M&L for pavementceramic tile (min size 300 x 300 mm) and 8 to 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick rendering in CM 1:4 on 25 mm thick PCC 1:2:4 Type B-0 using 12.50mm graded stone agg,complete all as specified. (Make :- Kajaria/ Johnson ) |
| 126 | M&L Machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm with marble border including rubbing and polishing complete all as specified. |
| 127 | Ditto for skirting with 10mm thick rendering in CM 1:4 complete all as specified. |
| 128 | M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n exc 2.50 Sqmand joints filled with mastic filling . |
| 129 | M&L 40mm thick PCC type B1, 1:2:4(20mm graded stone aggregates) as in floor finished surface even and smooth using extra cement complete all as specified and directed. |
| 130 | M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and in surface channels and drain complete all as specified and directed. |
| 131 | Extra for forming fair finished drain or channel 30CM inner girth in cement concrete using extra cement including form moulds mitred/ stopped ends etc complete all as specified and as directed. |
| 132 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto |
