Open Jim Work 2 Kota Nagar Nigam Kota North Area 4 Palace - Providing & Fixing Cross Trainer 2 Seated Puller Leg Press 5 Chest Cum Shoulder Press 6 Push Up Bars, Kota-Rajasthan
TDR : 29910474
Tender Notice
BOQ
Expired
Kota
Rajasthan
Open Jim Work 2 Kota Nagar Nigam Kota North Area 4 Palace - Providing & Fixing Cross Trainer 2 Seated Puller Leg Press 5 Chest Cum Shoulder Press 6 Push Up Bars
Name of Work:KOTA NAGAR NIGAM NORTH AREA FOUR PALACE OPEN JIM WORK 2
Sl. No.
Item Description
1
WORK NAME
2
CROSS TRAINERProviding & fixing of cross trainer of size 132mm (length) x 1750mm (hight) febricated with the main frame pipes of 80NB shall be made of \"C\" class G.I. and pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. the handie frame shall be made up of 25NB \"C\" class G.I. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of 80 NB \"C\" class welded with M.S. round plate of Ø250 mm & 10MM thick. main pipe should be supported with 25mm x 25 mm M.S. angles of 3mm thickness and 20mm x 40mm and CRC square pipes of 3mm thickness. to build structure bushes to be used which shall be made from M.S. seamless pipe of 60mm OD with 5mm thickness. the footrests shall be made from aluminum casting material of size 130mm x 310mm x 5mm thickness and mounted. (the cement concrete and excavation work shall be paid separately).
3
SEATED PULLERProviding & fixing of seated puller of size 1900mm (length) x 740mm (hight) febricated with a center pipe is pipes of 100NB shall be made of \"C\" class G.I. and pipe bottom support of M.S. round plate of Ø250 mm & 10mm thickness shall be welded. all linkages shall be made made up of 25NB \"C\" class G.I. pipe. the handle frame of 32NB \"C\" class G.I. pipe. the seat frame of 32NB \"C\" class G.I. pipe to build structure bushes to be used which shall be used which shall be made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush shall be. the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80NB \"C\" class welded with M.S. round plate of Ø250mm & 10mm thick. main pipe shall be supported with 25mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC sqware pipe of 3mm thickness. foundation cover closing cap shall be made from FRP material. the seats and back rests tobe fitted on the outer frames shall be made up of M.S. sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. clossing caps shall be made up of high quality fiber rainforced plastic material. pins to be used of diameter 25mm and 17mm shall be made up (the cement concrete and excavation work shall be paid separately).
4
LEG PRESSProviding & fixing ofleg press of size not less than 1840mm (length) x 360mm (width) x 1560mm (hight) to builed up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250mm & 10mm thick. the sleeve frame minimum of 100 OD and of M.S. seamless pipe with thickness 5mm . this sleeve should be having disassembled from main frame. the footrest shall be made from casted aluminium material, having size minimum of 130mm x 310mmX 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder couting shall be done with pure polyster powder of ackzonoble/nerolec with 60 to 70 micron thickness. complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the directions of engineer-in-charge to fullfill the functional requirement work shall be paid sepately).
5
CHEST CUM SHOULDER PRESSProviding & fixing of chest press cum seated puller of size not less than 2000mm (length) x 710mm (width) x 2200mm (height). To enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250mm & 10mm thick. the seats and back rests and back rests to be fitted on the cular frames shall be made up minimum of M.S. sheet of size 330mm x 300 x 2mm thickness. closing caps shall be made up of high qaulity fiber rainforced plastic material. high tencile steel with galanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyster powders from ackzonoble/berger/nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure under the directions of engineer-in-charge to fullfil the functional requarement. the indicative design/photo is as per encloser photo no. 11 (the cement concrete and excavation work shall be paid separately).
6
PUSH UP BARSProviding & fixing of Push up bars of size not less than 1220mm (length) x 550mm (width) x 1700mm (hight) to enhance the stemina of the body. The main structure frame shallbe made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250mm & 10mm thick the handle frame minimunm of 25NB shall be made from \"C\" class G.I. pipe closing caps shall be made up of high quality fiber rainforced plastic material. high tencil steelwith galanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyster powders of ackzonoble/berger/nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure under the directions of engineer-in-charge to fullfil the functional requarement. the indicative design/photo is as per encloser photo no. 12 (the cement concrete and excavation work shall be paid separately).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
