Bids Are Invited For 1 - Cementppc In 50 Kg Bags. ( Make - Ambuja / Ultra Tech / Star Cement / Acc ) , 2 - Sand ( Fine Aggregate ) , 3 - Coarse Aggregate Grade 40 Mm , 4 - Structural Steel Rolled Section Angle Iron 65Mm X 65Mm X 6Mm Fencing Post 3.7-Assam

Bids Are Invited For 1 - Cementppc In 50 Kg Bags. ( Make - Ambuja / Ultra Tech / Star Cement / Acc ) , 2 - Sand ( Fine Aggregate ) , 3 - Coarse Aggregate Grade 40 Mm , 4 - Structural Steel Rolled Section Angle Iron 65Mm X 65Mm X 6Mm Fencing Post 3.75 Long Conforming To Is2062-1984 Including Fabrication Of 0.75 Long Top Portion For Swan Neck At 30 Degree To Vertical Including Making Six Round Holes Of 15Mm Dia On Vertical Posts For Fixing Ofnuts And Bolts And Three Nos Of 15Mm Dia Holes For Fixing Strut And Four Nos Notches On The Swan Neck And Welding To Two Nos Of 16Mm Ms Rod Each Of 0.23 Mtr Length To Bottom End Of Picket For Anchorage Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For The Exposed Surface Of Angle Above Gl Complete And Two Coats Of Bituminous Paint To Embedded Portion Of Angle ( 0.60M ) Weight Of Each Picket Shall Be Not Less Than 21.75 Kg. ( Make : Tata / Sail / Jindal ) , The Iron Angle Shall Be Provided With Ms Plate Of Thickness 3Mm And Size 15Mm X 15Mm Welded At The Bottom And Having 04 Nosfoundation Bolts For Anchorage. , 5 - Ms Flat Of 40Mm X 4Mm, 2.4M Long With Holes Of 15Mm Dia, All As Per Drg Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint. ( Make : Tata / Sail / Jindal ) , 6 - Ms Rod 10Mm Dia Of Length 5 Mtr With Hook On Sides Made To Shape Including Two Coats Of Aluminium Paint. ( Make : Tata / Sail / Jindal ) , 7 - Galvanised Steel Chain Link Fence Fabric Of Mesh Size 100Mm X 100Mm ( + / - ) 4Mm Of 4Mm Nominal Diameter.The Size Of Each Chain Link Fence Roll Shall Be 2.4M X 15M Mesh Wire.Galvanized Chain Link Shall Be Manufactured As Per Is4826. ( Make : Tata / Sail / Jindal ) , 8 - Structural Steel Rolled Section Angle Iron 65Mm X 65Mm X 6Mm, 2.70M Long 15.89 Kg Per Picket Conforming To Is2065-1984 Including Fabrication For Strut Post Bend At Top Portion Including Making Three Nos Holes Of 15Mm Dia Including 0.23M.16Mm Dia Ms Rod Two Pieces To Be Welded At Bottom For Anchoring Purpose Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For Exposed Surfaces Of Angle Above Gl And Two Coats Of Bituminous Paint On Embedded Portion Of Strut 0.60 Mtr Below Gl. ( Make : Tata / Sail / Jindal ) .The Iron Angle Shall Be Provided With Ms Plate Of Thickness 3Mm And Size 15Mm X 15Mm Welded At The Bottom And Having 04 Nosfoundation Bolts For Anchorage , 9 - Mild Steel Bolts With Hexagonal Head At One End And Screwed On The Other End, Fitted With One Nut And Two Washers.The Bolt Shall Be 12Mm Dia And 50Mm Long. ( Make : Tata / Sail / Jindal ) , 10 - Galvanised Two Strand Steel Barbed Wire ( Line Wire ) Of 2.24Mm Dia Of Wire Barbed With 2Mm Dia Barbs At 75Mm Spacing.The Barbs Are Point Wire 2Mm Thick Wire Shall Be Isi Marked Confirming To Is 278 Of 1978 ( Third Revision ) With Amdt No 1 To 4.The Points Of Barbs Shall Be Sharp.The Line And Point Wires Shall Be Circular In Section Free From Scales And Other Defects And Shall Be Uniformly Galvanized.The Barbed Wire Shall Be Manufactured As Per Clause 11.2.1 And 11.1.2 Respectively Of Is Specification Cited Above Read With Is4826 / 79 ( First Revision ) . ( Make : Tata / Sail / Jindal ) , 11 - Gi Binding Wire 1.20Mm Dia. Total Quantity : 1

Refer document

Refer document

INR 22.37 Lakhs /-