Military Engineer Services-MES has published Spl Repair To Plastering Flooring Joinery Roof Treatment Rewiring And Plumbing Work In Bldg No P8 By 1 And 8 By 4 To P8 By 6 Plastering Painting Roof Treatment And Misc Work In Bldg No P2 And Provn Of Partition Wall In Between Mes Family Qtr And Otm Spl R. Submission Date for this Tender is 13-12-2021. Shed Construction Tenders in MUZZAFFARPUR Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-12-2021 |
| 2 | 09-Dec-2021 | CORRIGENDUM | Date | 13-12-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed |
| 2 | M & L for brick work with sub class `B" brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc |
| 4 | M&L for RCC as in kitchen platform, shelves & chajjas etctype B1 1:2:4 (20 mm graded aggregate) including necessary from workcomplete all as specified & directed. |
| 5 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 6 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 7 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 8 | Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified & directed. |
| 9 | M & L for PCC 1:3:6 type C2 (Using 40 mm gradedstone aggregate) 100 mm thick complete all as spd and directed |
| 10 | M & L for PCC 1:2:4 type B1 (Using 20 mm gradedstone aggregate) 50 mm thick complete all as spd and directed |
| 11 | M & L 25 mm PCC 1:2:4 type B1 (Using 20mm gradedstone aggregate) as in floor etc complete all as spd and directed |
| 12 | M & L for Non skid colour tiles of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.18 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 13 | M&L for glazed ceramics coloured tiles of size 3000x200x 7mm thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 14 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed. |
| 15 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer"s instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note:Liquid WPC will be measured and paid separately. |
| 16 | M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed . |
| 17 | Supply only water proofing compound (liquid),ISI marked complete all as specified & directed. |
| 18 | Roughening surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. and brushing neat cement slurry @ 3 Kg /Sqm Complete all as specified & directed |
| 19 | M&L15 mm thick screed bed mixed with water proofing compound at 200ml/per beg of cement on roof surfaces/concrete surface in CM 1:4 complete all as specified as directed. Note : WPC shall be measured separately under appropriate item |
| 20 | M&L for 25 mm average thickness PCC 1:2:4 type B-0 (Using 12.50mm gradedstone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed, |
| 21 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii)Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. |
| 22 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 23 | M&L for Preparation of old plastered surfaces of wall, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint complete all as specified and directed. |
| 24 | M&L for applying 3mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 25 | M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered surface of wall & concrete and applying 3 mm thick wall care putty including preparation complete all as specified and directed. |
| 27 | M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered wall surfaces includingpreparation complete all as specified and directed. |
| 28 | M&L for applying 3mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 29 | M&L for applying two coats of oil bound distemper on ceiling on old surfaces complete all as specified and directed. |
| 30 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 31 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 32 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame)complete all as specified and directed |
| 33 | Ditto--- as per Srl itemNo 32.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed. |
| 34 | S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed. |
| 35 | ~Ditto~ All as per item No 34.00 above but without glazing bars complete all as specified and directed |
| 36 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed. |
| 37 | S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 38 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed... |
| 39 | SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 40 | S & F aluminium alloy anodised, slidingdoor bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed. |
| 41 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 42 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 43 | S&F Aluminium handles, cast type, anodized 150 mm sizeISI Marked complete all as specified and directed. |
| 44 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 45 | S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 46 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge |
| 47 | S&Fin repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 48 | S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed. |
| 49 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 50 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 51 | S & Fframed work such as grils gratings etc with ends of bars shouldered end / or riveted or forged into spikes, framed guard bars, barred irons, ladders framed, baluster walk ways, railings, framework of water tanks and similar work conforming to FE410 or FE 310-0 complete all as specified and directed. |
| 52 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.complete all as specified and directed. |
| 53 | M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 54 | M&L for hard core of broken brick gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed. |
| 55 | M&L machine cut cuddappa stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror and polishing & rounding to edgesover & incl 20 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 56 | S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 57 | S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 58 | S&F in repair vitreous china squating pan "Orissa" pattern WC size 580x440 mm white with integral foot rest and trap andincluding connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor completeall as specifiedand directed. |
| 59 | S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia completeall as specifiedand directed. |
| 60 | Supply and fixing in repair 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 61 | S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete in repair complete all as specified & directed. |
| 62 | S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed. |
| 63 | S&Fin repair Soap dish, stainless steel, approximate size 160x160x90mm and approved by EIC complete all as specified & directed |
| 64 | S&F in repair bib tap 15mm chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed. |
| 65 | S & F of 75 mm dia PVC (SWR) Plain floor trap, with grating including jointing with solvent cement complete all as specified and directed. |
| 66 | Taking down PVC/ACpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mmdia pipe complete all as specified and directed. |
| 67 | S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 68 | S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 69 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing end of stays to wall or roof for 110 mm PVC complete all as specified and directed. |
| 70 | S&F PVC (SWR)bend/shoes any radius of 110 mm dia complete all as specified and directed. |
| 71 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed |
| 72 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 73 | M & L antitermite treatment of soil under existing floor using emulsion @ one ltr per hole 300 mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed. |
| 74 | M & L antitermite treatment along the external wall below concrete or mesonary apron using chemical @ 2.25 ltrs per linear meter including drilling and plugging holes etc in apron complete all as specified & directed |
| 75 | S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 76 | M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed. |
| 77 | Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed |
| 78 | Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed |
| 79 | S & F 15 mm dia GI mild steel tube medium grade withall fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 80 | S & F 20 mm dia GI mild steel tubemedium grade withall fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 81 | S & Fin repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed. |
| 82 | S&FPTMT ball valve 20 mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified & directed |
| 83 | S&FGun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified and directed. |
| 84 | Cutting chases in brick wall, etc for concealed water tubing ,etc & making goodin CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed. |
| 85 | S&F in repair 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed. |
| 86 | M&L for three coats of white washing on new wall surface incl preperation complete all as specified and directed. |
| 87 | M&L for two coats of white washing on old wall surface incl preperation complete all as specified and directed. |
| 88 | M&L for three coats of white washing on new surface in ceiling incl preperation complete all as specified and directed. |
| 89 | M&L for two coats of white washing on old surface in ceiling incl preperation complete all as specified and directed. |
| 90 | M&L for Preparing old painted surfaces of wood and wood based materials of any description and girth, not otherwise described over 10 cm in width or grith and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 91 | M&L for Preparing old painted steel and iron surfaces of any description and girth, not otherwise described over 10 cm in width or grith and apploying two coats of synthetic enamel paint complete all as specified and directed. |
| 92 | S&F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spd and directed |
| 93 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 94 | Boring holes 3m deep and 300 mm dia of pilein soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed. |
| 95 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 96 | M&LPCC1:4:8type-D2 (40mm graded aggregate) asin foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed.. |
| 97 | M&L RCC type M-25 Design Mix using (20mm graded aggregate) as in under reamed piles, bases of columns, footing, foundations and plinth beams complete all as specified and directed (Note :- Reinforcement shall be measured and paid separately under respective item) |
| 98 | M & L for providing reinforced cement concrete M-25Nominal Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) |
| 99 | M & L for pre-cast cement concrete block masonry with solid blocks,made with cement concrete 1:2:4 type B-1, exc 10cm in width and setting in cementmortar 1:6 complete all as specified and directed. |
| 100 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 101 | M & L for formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. |
| 102 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 103 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 104 | Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 105 | Taking down carefully main switches DB"s/ MCB DB"s with MCB and making good the disturbed surfaces of wallscomplete all as specified and directed. |
| 106 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed. |
| 107 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:- |
| 108 | One light/fan point controlled by one switch complete all as specified & directed |
| 109 | One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed. |
| 110 | One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed. |
| 111 | ~Ditto~all as per Sch A Item No- 107.00 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed.. |
| 112 | S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed. |
| 113 | S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed. |
| 114 | Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed. |
| 115 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed. |
| 116 | S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed. |
| 117 | Supply & fixing batten / angular fitting complete all as specified and directed. |
| 118 | Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed. |
| 119 | Refixing old serviceable light fittings of any type and description complete all as specified and directed. |
| 120 | Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. |
| 121 | S&F MCB SP of capacity 5 - 40 Amps 240 volts, 10 KA breaking capacity "C" type incl connectioncomplete all as specified & directed. |
| 122 | Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell"s Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG/Philips. |
| 123 | Supply and fixingdouble door SPN DBs eight wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . |
| 124 | S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make-Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+CRYSTAL1213T8DSTL18WLED865SGLASSor equivalent model of Bajaj/Philips/ CG. |
| 125 | M&L for Sub main wiringtwo single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor,drawn in and including non metallic rigid PVC conduit medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles etc of size 25 mm external dia in concealed wiring system by cutting of wall and making good disturbed surface of wall as per existing and including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed. |
| 126 | M&L for earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
