Military Engineer Services-MES has published Repair To Rolling Sliding Shutters Galvalume Ac Sheet Roof Treatment Plaster Work At Od Shakurbasti Hirankudna And Timarpur Area Under Age Br Ii Of Ge North Delhi Cantt 10. Submission Date for this Tender is 14-12-2021. Shed Construction Tenders in GE NORTH DELHI CANTT-10 Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Dec-2021 | Corrigendum 1 | Date | 07-12-2021 |
| 2 | 07-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-12-2021 |
| Sl. No. | Item Description |
| 1 | M&L for taking down existing roof treatment incl damped plaster/PCC and throw awayout of MoD land all as specified & as directed by GE |
| 2 | M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry @ 3 Kg/Sqm complete all as specified and directed |
| 3 | M & L forWater proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a)M&L for 15mm thick plaster screed bed layer in CM 1:4inc WPC @3% by weight of cement on existingsurfaces. (b)Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.40 Kg/Sqm of area complete all as specified. (c)Laying 3mm thick APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and appliedover a coat ofbitumin of Gde 85/25 1.2 kg per sqm complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d)Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by GE |
| 4 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 5 | M&L for PCC1:2:4 Type B-0 ( 12.5 mm graded aggregate) cement concrete in roof padding,roof kerbs of mud stops, rounded or chamfered on edgescomplete all as spcified and directed. |
| 6 | Supply only Integral water proofing compound complete all as spcified and directed. |
| 7 | Disconnecting existing tanks, exc 500 & n.exc 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position all as specfied and directed by GE. |
| 8 | Demolition of reinforced cement concrete in roof floor (other than ground floors)beams staircase, landing chajja and similar work complete all as specified. |
| 9 | M&L for Reinforced cement concrete 1:2:4 type B-1 ( using20 mm graded cdrushed stoneaggregate) asin chajjas and the like, all as specified and directed by GE. |
| 10 | Use and waste of formwork to chullah hoods, cha jjas, troughs and similar items including edges fair finished surface of concrete, all as specified . |
| 11 | M&L for TMT bars10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia completeall as specified. |
| 12 | M&L for TMT bars 6mmto 8mm diain reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia completeall as specified. |
| 13 | Demolition of cement concrete unreinforced in any position not exceed 15 cm thickness complete all as sepecified and directed |
| 14 | M&LProviding cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as sepecified and directed |
| 15 | M&L for 40 mm thick PCC type B-1,1:2:4 in flooringincluding finishing cement concrete surface even and smoothcomplete all as spcified and directed. |
| 16 | M&L for Glass dividing strips, 3mm thick and 38 mm widecomplete all as specified and directed |
| 17 | M&L Taking down cement plaster frombrick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water and removal of derbis outside of MoD land complete all as specified and directed |
| 18 | M&L for 15mm thick Ready mix plaster(Make : Ultratech) on brick work or concrete surfaces of wall (External surface) in CM 1:4 finished even and fair surfacecomplete all as specified and directed by GE. |
| 19 | M&L Taking down cement plaster of any descriptionfrom brick, stone walls or concrete surfaces on other than fair faces of brick work including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:6) intwo layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixitor equvalant inte gral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed.Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperatly |
| 20 | M&L Taking down cement plaster of any descriptionfrom brick, or concrete cieling surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 10 mm th in cm (1:4) inmixed with PD proof 101 LW(+) of Dr fixitor equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed.Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperatly |
| 21 | M&L for cutting chases in V shape, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Bk walls complete all as specified and directed. |
| 22 | Supply only PD proof 101 LW (+) of Dr Fixit or eqe. complete all as specified. |
| 23 | Supply only super latex 302 ofDr Fixit or eqe.complete all as specified. |
| 24 | Demolition of brick/stone masonry built in CM. all as specified. |
| 25 | M&L brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6 all as specified. |
| 26 | M&L brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6 but except bricks all as specified. |
| 27 | M&Lhalf brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:4all as specified and directed. |
| 28 | S&Fchicken wire mesh 20 mm size fixed with nails atthe junction of two desimiler material on wall, roof or any other surface/location all as sepecified and directed |
| 29 | M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushescleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beamsetc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgsall as specified. (Note :Steel welded mesh is to be tightend / weldedwith the existing re-inforcement.The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor). |
| 30 | M&L for preparing newly plastered surfaces of ceilling and applying two coats of white wash complete all as specified. |
| 31 | M&L preparation of newly plastered surfaceon walls and applying 2 coat of OBD over a coat of chalk whiting complete all as specified. |
| 32 | M&L two coats of cement base paint on walls including preparation on new surfaces over a coat of primer complete all as specified and directed. . |
| 33 | M&L for preparing newly plastered surfaces of wall and applyingthree coats of white wash complete all as specified and directed. |
| 34 | M&L for preparation of old decorated plastered orunplastered surfaces wall by brooming down scrapping down smoke and efflorescent salts etc and applying two coat of white wash on walls complete all as specified and directed. |
| 35 | M&L forpreparation of old decorated plastered orunplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down complete all as specified and directed. |
| 36 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grithcomplete all as specified and directed. |
| 37 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grithcomplete all as specified and directed. |
| 38 | M&L for preparation of old decorated surfaces of any description and applyingone coats of cement base paint on external wall surface complete all as specified and directed. ( Height of Bldg is upto 15 mtr ) |
| 39 | Dismantaling plain or corrugated AC sheeting any gauge, thickness,roof covering all as specified and directed.. Note: Hieght of building/ shed is upto 12mtr. Contractor will provide safety arrangements. |
| 40 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 41 | Except sheeting pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 42 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 43 | S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, with "L" or "J" type hooks etc all asspecified and directed. |
| 44 | Except sheeting 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, with "L" or "J" type hooks etc all asspecified and directed |
| 45 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 47 | S & F Steel work in tubular trusses/purlin of any size or shape including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including nut,bolt, MS plate complete all as specified and directed by Engr-in-Charge. |
| 48 | M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of block shall be of 6 Qtrs. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge |
| 49 | S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls incl taking down all as specified. |
| 50 | S&F in repairs 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls incl taking downall as specified. |
| 51 | S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted ofand fixed in position incuding provn of inlet , out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed. ( Make : Sintex , polycon , SPL ) |
| 52 | -- Ditto --But 1000 ltrs capacityof tanks |
| 53 | S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed etc all as specified and directed. |
| 54 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed etc all as specified and directed. |
| 55 | Demolition of stone slabe or tiles pf any description or thickness in floors aprons etc laid bedded and pointed in any mortar comlete all as specified and directed |
| 56 | M/L20mm thick granite (of any type) work (table rubbed and polished) as in pillars, steps and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteover 15 mm thick plaster in CM 1:4, all as specified. |
| 57 | Dismantling floor, hearthor wall tiling incliding cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premisses, complete all as specified and directed. |
| 58 | M&L for Vetrified Ceramictiles 10 mm thick light shade (Square/rectangular) anyshade,polished area of each tile not exceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over 15mm thick screed bedding layer of mortar inCM 1:6 for laying floor finish complete all as specified and directed.. |
| 59 | M & L non skid ceramic tiles coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and incliding 15 mm thick cement mortar (1:6) screed bed complete all as specified and directed. |
| 60 | M & L Non-skid ceramic coloured tiles 7 to 8mm thick square area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and joinnted in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 61 | M & L glazed ceramic coloured tiles size 450 x 300x 7-8 mm thick in walls etc set and jounted in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 62 | M & L glazed ceramic coloured tiles size 300 x 200x 7-8 mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 63 | Taking down rolling shutters of any description and size including anchoring rod, top cover and all fittings complete, including making good the disturbed portion Complete all as per specified and directed. |
| 64 | Cutting holes in brick walls built in cement mortar exceeding half brick but n.exc one brick for inserting hold fasts or similar work and make good the dismantled portion in cement concrete 1:2:4 type B-1 Complete all as per specified and directed. |
| 65 | S & F steel rolling shutters, 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple including one shop coat primer, erected in position, gear operated type with bevel gear box including locking arrangement and crank handle as indicated. Complete all as per specified and directed. |
| 66 | S & F Ball bearing for rolling shutters complete all as per specified and directed. |
| 67 | S & F in repair mild steel structural work in framed doors of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting etc and to be prepared for hanging or sliding with & including hooks and pintle hinges locking arrangements etc confirmedto Fe 290 (Gde E-165).(Steel sheet covering shall be measured and paid separately) Complete all as per specified and directed. |
| 68 | S & F plain mild steel black sheets 1.25 mm thick covering to steel doors cut to size with plain 40 mm lap joints or welded/riveted seams including bending, turningup etc. Complete all as per specified and directed. |
| 69 | Taking down rolling shutters of any description and size including top cover, cleaning the helical wire spring, anchoring rod, guide channels etc and greasing /oiling to all moving parts of rolling shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out lath 1.25 mm thickand re-fixing the rolling shutter with top cover and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like helical wire spring, anchoring rod, gear box, etc shall be measured and paid in following item given below.) |
| 70 | Supply only mild steel helical wire spring 45 cm long, 75 mm dia and weighing of each spring not to be less than 2.40 kg. Complete all as per specified and directed. |
| 71 | Supply only mild steel tube medium grade of 40 mm dia for anchoring rod to rolling shutter including necessary weding to M.S. bracket plate, drilling holes for fixing spring. Complete all as per specified and directed. |
| 72 | Supply only mild steel lock plate and handle made out of MS flat iron, including necessary welding. Complete all as per specified and directed. |
| 73 | Supply only gear box full set including realignment of connecting rod. Complete all as per specified and directed. |
| 74 | Supply only MS gear assembly including connecting and fixing the gear box to wall with two numbers hexogonal bolts 10 mm dia. Complete all as per specified and directed. |
| 75 | Supply only 1.00 mm thick laths in any type of rolling shutters and in any length including all necessary work for satisfactoringly functioning of rolling shutter complete all as specified and directed. |
| 76 | Taking down sliding shutters of any description and size including Channels, rail, cleaning the guide channels etc and greasing /oiling to all moving parts of sliding shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out 1.25 mm thick MS steel sheet and re-fixing the sliding shutter with and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like Channel , angle rail etc shall be measured and paid in following item given below.) |
| 77 | Supply only Mild Steel ,laths 1.25 mm thick in any type of sliding shutters and in any length including all necessary work for satisfactry functioning of sliding shutter complete all as specified and directed. |
| 78 | Supply onlyguide channel, rails, angle etc for smooth functioning of sliding shutter including necessary welding to M.S. bracket plate, drilling holes for fixing complete all as directed and specified. |
| 79 | Supply and fixing in repairs 3 mm thick plain sheet glass ordinary sheet glass and glazing with oil putty complete in squares no exc 0.50 Sqm each pane incl hacking out old broken glass (any thickness, size, quality or discription)complete all as specified and as directed. |
| 80 | Supply and fixing in repairs 3 mm thick frosted sheet glass ordinary and glazing with oil putty complete in squares no exc 0.50 Sqm each pane incl hacking out old broken glass (any thickness, size, quality or discription)complete all as specified and as directed. |
| 81 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed |
| 82 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed |
| 83 | Dismantling timber scantlings 40 sq. cm and over in section unframed work, in any positionwork complete all as specified and directed |
| 84 | M&L Non asbestos fibre cement building board 600x600x4mm for fixing in cieling or laid/inserted to timber/GI/Aluminium framework complete all as specified and directed by Engr-in-Charge. (Note : frame work for ceiling shall be measured and paid seperately) |
| 85 | M&L Anodised aluminumsnap grid frame work of size 605x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long with complete hanging arrangement and making good at surface all as specified and directed |
| 86 | Taking down chowkhat with shutters with out taking off shutters from the frame n.exc 1.5 Sqm each complete all as specified and directed |
| 87 | Taking down chowkhat with shutters with out taking of shutters from the frame exc1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed |
| 88 | Taking downdoor shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete , all as specified and directed byGE. |
| 89 | Taking down shutters of any description exc 1.00 sqm but n.exc 2 sqm each complete all as specified anddirected. |
| 90 | Refixing in same opening of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 91 | S&F Glazed and skeleton shutters, open rebated and 35mm thick 2nd class hardwood prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats etc complete all as specified and directed. |
| 92 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 93 | S&F Galvanised stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 94 | S&F butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed. |
| 95 | S&F 150mm long Mild steel barrel tower bolts, stove enamellled black, with bright bolt and fixed complete all as specified and directed. |
| 96 | S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 97 | S & F 300 mm long Mild steel sliding door bolts plate type, store enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 98 | S&F, in repair, ordinary rat tail rod pattern spring incl roller and roller plate complete 300mm of mild steelincl necessary welding for fixing arrangement etc complete all as specified and directed. |
| 99 | S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d)Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i)Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx "B |
| 100 | S&F aluminium door shutter with frame100X45X1.5mm powder coated fixed to wall with steel fastnes min four number each side partly glazed with 5 mm thick tinted glass and partly panelled with 8mm thick coloured aluminium composit panels incl rubber beading, joining cleat for fixing in position, 2 numbers aluminium door handle 250 mm long, 1 number aluminium barrel tower bolt 200 mmlong ,1 number aluminium floor door spring & one No 4 liver mortice lock of Godrej of size 100 mm in each shutter will be provided all as specified and directed as per following specifications-- (a) Vertical Members of shutter (Style) Section shall beof size 85.00 x 44.45 x 1.50 mm (Section No 19560) (b) Top rail ( TopMembers) of shutter Section shall beof size 85.00 x 44.45 x 1.50 mm (Section No 19581) (c) Lock rail (Middle member) of shutter Section shall beof size 150.00 x 44.45 x 1.50 mm (Section No 19596) (d) Bottom rail ( Bottom Members) of shutter Section shall beof size 150.00 x 44.45 x 1.50 mm(Section No 19584) (e) Glazing clip for securing glass of shutters shall beof 0.80 mm thick (Section No 19370). Standered quality rubber beading shall be used for securing of glass (f) Top, Bottom and verticle member ofshuttert will be tightened with hexagonal nut and purpusly made bolt of 10mm diaMS round bar threaded on both the end .Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. |
| 101 | S&F aluminium anodised powder coated Deco grill DG-104 10mm widewith U shape snap beading all asComplete specified and directed. |
| 102 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as specified. |
| 103 | S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC "C" channel having a PVC sheet strip of 20 mmcomplete all as specified and directed . Make Rajshri |
| 104 | M&L Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed.. |
| 105 | M & L for appying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface including preparation of surfaces complete all as specified and directed. |
| 106 | M&L two coats of synthetic enamel paint over one coat of primer on new wooden surfaces including preparation of surfacesexc. 10 cm width or girth all as specified. |
| 107 | M & L 75 mm thick Cement concrete 1:3:6 (40mm graded aggregate)inplinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 108 | M&L Chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick , set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 109 | M&L for 60mm thick, machinne pressed precast concrtete interlocking pavers blockwith grey cement and no pigment any shape and size confirming to IS 15658-2006 of size 250x250mm, having compressive strength of M-35 grade zig,zag (uni-paver)complete as specified and directed. |
| 110 | M&L 50mm thick (average) sand filling under floors on in foundations including watering and consolidation complete all as specified and directed. |
| 111 | M&L for 15mm thick Ready mix plaster(Make : Ultratech) on brick work or concrete surfaces of wall (Internal surface) in CM 1:6 finished even and fair surfacecomplete all as specified and directed by Engr-In-Charge. |
| 112 | M&L for 10mm thick Ready mix plaster(Make : Ultratech) on brick work or concrete surfaces of cielingin CM 1:4 finished even and fair surfacecomplete all as specified and directed by Engr-In-Charge. |
| 113 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with rubber ring joints etc including taking out/dismantling of old pipes complete all as specified. |
| 114 | All as per item No above but bore of pipe in 110 mm. |
| 115 | S&Fin repairPVC (SWR) bends any radius bore 75 mm |
| 116 | All as peritem No. above but bore of pipe in 110 mm. |
| 117 | S&F in rep stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore completeall as specified. |
| 118 | S&F in repair water closet squatting pan ``Orissa pattern`` 580 mmx440 mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified. |
| 119 | S&F in repairViterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by GE. |
| 120 | S&F in repairPVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete complete all as sepecified and directed |
| 121 | S&F in repair Bib cock with long thread, chromium plated , with long body, wall flangescrewed for ironpipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified. |
| 122 | S&F in reapir angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified. ISI marked. |
| 123 | S&F in rep Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified |
| 124 | S&F in repairs for 600mmx450mm mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 125 | S&F in repairs Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges . all as specified. |
| 126 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm. |
| 127 | M&L Indian type WC/EWC including demolittion of cement concrete (unreinforced) in sunken portion of WC,area n.exc 1.50 sqm including removing ofunserviceable materials inclrendering 10 mm thick plaster in cement mortar ( 1:4 ) with WPC and laying lean concrete in bottom portion of WCand then applying 3mm thick APP membrane over bitumen primer surface of walls and bottom portion of WC with torch method , provide 32 mm dia GI tubing asspout ofsunken portion 0.60 m longof approved quality , By filling Khanger / cinderand lean concrete, supply and fix vitreous china Squatting pan "Orissa pattern" size 580x440mm white, with integral foot rest & " P" traps & jointing new 100 mm dia CI pipe with lead jointstoWC ( excluding flushing cistern& flush pipe ) . Testing of sunken portion will be carried out by filling water for 24 Hrs in sunken area complete in all respectas specified and directed . |
| 128 | S&Fin repairs CP mixercast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing"Hot" or "Cold" water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm. |
| 129 | S & F Glass Shelf Cornertrangular typeshelf 250 mm radius with guard bars with CP brackets fancy type 5mm thick glassMake : prayag/Zim |
| 130 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern and flush pipeconnection to trap and to flushing pipe complete all as specified and directed. |
| 131 | Supply onlyEWC Seat cover black colour of PVC complete all as specified and directed. |
| 132 | S&F in repair CP hand spray (health facucet with 1.0 M long easy flex tube in chrome finish and wall hook) complete all as specified and directed. Make : PRAYAG/CERA |
| 133 | S&F in repair 2 in 1 Angle Valve 15 mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed Make ZIM/SIKKO/PRAYAG. |
| 134 | S&F in rep chromium plated jet for WC with 1.00 M long PVC pipe including necessary fittings complete all as specified and directed. |
| 135 | Dismantling cast iron pipepipes, jointed in cement mortar of any dia upto 100mm. all as specified. |
| 136 | S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls duly apply a coat of bitumenous black paint complete all as specified and directed. |
| 137 | S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to walls duly apply a coat of bitumenous black paint complete all as specified and directed. |
| 138 | S&F in rep Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. all as specified. |
| 139 | S&Fin rep Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door. |
| 140 | S&F in repairs 32/40mm dia PVC waste pipe for WHB & sink with union complete all as specified. |
| 141 | S&Fin rep Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm -125gms). |
| 142 | Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 56020.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
