Public Works Department-PWD has published Renovation And Repairing Of Telecommunication Branch Room No. 36 And 37 At Gtb Hospital Shahdara Delhi. Sh Civil Work Recall Renovation And Repairing Of Telecommunication Branch Room No. 36 And 37 At Gtb Hospital Shahdara Delhi. Sh Civil Work Recall. Submission Date for this Tender is 20-11-2021. Building Work Tenders in HE-2 GTB Hospital Shahdara Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
2 | Granite of any colour and shade |
3 | Area of slab over 0.50 sqm |
4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
5 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
6 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
7 | 50 mm |
8 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less thanrade AC 10 as per IS : 1868), transparent or dyed toequired colour or shade, with nuts and screws etc. complete : |
10 | 300x16 mm |
11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
12 | 250x10 mm |
13 | 150x10 mm |
14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
15 | 125 mm |
16 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screwsetc. complete. |
17 | Twin rubber stopper |
18 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
19 | Double strip (horizontal type) |
20 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
21 | 75 mm |
22 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
23 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
24 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
25 | Size of Tile 600x600 mm |
26 | 12 mm cement plaster of mix : |
27 | 1:6 (1 cement: 6 fine sand) |
28 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. |
29 | Two or more coats on new work |
30 | Applying priming coat: |
31 | With ready mixed pink or Grey primer of approved brandand manufacture on wood work (hard and soft wood) |
32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
33 | Two or more coats on new work |
34 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. |
35 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
36 | Of area 3 sq. metres and below |
37 | Of area beyond 3 sq. metres |
38 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
39 | For thickness of tiles 10 mm to 25 mm |
40 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require |
42 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
43 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.(Semi rigid pipe) |
44 | 32 mm dia |
45 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality)complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
46 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour. |
47 | 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not lessthan 190 gms. |
48 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36mm height of approved quality and colour, weighing not less than 300 gms. |
49 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
50 | Internal work - Exposed on wall |
51 | 15 mm dia nominal bore (For making connection) |
52 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
53 | 15 mm nominal bore |
54 | Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 |
55 | 15mm nominal bore |
56 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
57 | For fixed portion |
58 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
59 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
60 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
61 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
62 | Pre-laminated particle board with decorative lamination on both sides |
63 | Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snapbeading shall bepaid in basic item): |
64 | With float glass panes of 5.50 mm thickness |
65 | With float glass panes of 8 mm thickness |
66 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
67 | Powder coated minimum thickness 50 micron aluminium |
68 | Providing and fixing anodised aluminium grill (anodised transparentor dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
69 | Dismantling wall tiles, majoic plaster in walls, i/c base mortar, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
70 | Providing and fixing ISI Marked block board conforms to IS : 1659 non-decorative type, Core of block board construction with frame of Ist. Class hard wood and well matched commercial 3 ply vneering with vertical grains or cross bands and face veneers on both faces of board in shelves, partition of cupboards etc. with screws and fittings wherever required. |
71 | Providing and fixing ISI Marked block board conforms to IS : 1659 non-decorative type, Core of block board construction with frame of Ist. Class hard wood and well matched commercial 3 ply vneering with vertical grains or cross bands and face veneers on both faces of board in cupboard shutter including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. |
72 | Providing and fixing PVC edge bending tape 2mm thick of approved brandwith adhesive of approved quality on the edges of the 18mm thick Block board as per direction of Engineer-in-charge. |
73 | Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Granite of any colour & shade. |
74 | Area of Slab over 0.50 sqm |
75 | Providing and fixing Ist quality Digital ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of size 300x450mm (minimum) approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
76 | Providing and fixing Vertical blind of approved make(Vista, Mak or Equivalent) and approved shade and texture of required widh/dropwith 100mm louvers installed with anodised aluminium controling unit of minimum wall thickness 1.20mm corner felt,nickel plated brass union, transvers card ofhigh strength polyster fiber,tiltrod with bottam machanism and brackets etc.i/c manufacturer recommendation and requirements at site and making good the wall etc, all Complete as per direction of the Engineer in charge |
77 | Credit for dismantiled material to be taken by Agency as and where basis. |
78 | old door shutter with choukhat |
79 | old window section |
80 | Add 15.69% Cost Index on DSR Items No. 1 to 39 |
81 | Diduction 9.50% on DSR Items No. 1 to 39 + Cost Index |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail