|
| 1 | STONE WORK |
| 2 | Providing and Construction of matt finishedNevasa Basalt Stone wall cladding in rectangular shape with machine cut edge and champher finish toward inner side top surface of stone should be hand chiseld and base should be rogh of make \"Polygon Hardscape or Equivalent\" , 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 10 m) |
| 3 | Providing and Construction of Butte Finished Basalt Stone for wall cladding rectangular in shape with edges of stone hand cut and champher finished towards inner side, top surface to be rock surfaced and base to be rough of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 150 to 200 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 3 m) |
| 4 | Providing and Construction of Basalt Stone Tile Flooring, edges of stone should be hand dressed and rectagular in shape of make \"Polygon Hardscape or Equivalent\", 15 to 20 mm thick, Rough Tooled, Machine Cut Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 5 | Providing and Construction of Butte finished Basalt Stone for wall coping in hard basalt stone in rectangular shape with edges of stone should be hand cut and inner side of stone champher finished, top surface should be rockgace and hand chiseled and rough base of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 150 to 200 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3) with Wide Joints not exceeding 10 to 15 mm in width and deep sunk pointing, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. (Lead and lift up to 3 m) |
| 6 | Providing and Construction of Basalt Stone for parapet coping in Hard Basalt Stone rectangular shape Quoins stone of size 12\" by 9\" by 3\" with top triangular in shape, hand cut with allsurfaces to be rockface and hand chisled of make \"Polygon Hardscape or Equivalent\" for Parapet Stone, 75 mm thick, Rough Tooled, Butte Finish set in cement mortar (1:3), as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 7 | Providing and Construction of 10.5 feet Deepmaal in Basalt Stone of make \"Polygon Hardscape or Equivalent\", with base size 4\" by 4\" and height 10.5\", set in cement mortar (1:3), as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 8 | Providing and Construction of Basalt Stone Cornice of size 75 inch, as per the design approved by Architect in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 75 mm thick, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 9 | Providing and Construction of Basalt Stone Cornice of size 225 inch, as per the design approved by Architect in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 225 mm thick, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 10 | Providing and Construction of Basalt Stone Corbel of size 300 mm height and 90 mm width as per the design approved by Architect, in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 300 mm height, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 11 | Providing and Construction of Basalt Stone Ledge of size 600 mm Length and 75 mm thick out of which 150 mm should be inserted in wall, as per the design approved by Architect. in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding, 600 mm Lenght (out of this 150 mm will be inserted in wall), Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 12 | Providing and Construction of Basalt Stone Name Plate Carving in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 3\" by 4\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge and architectural drawings. |
| 13 | Construction of Basalt Stone Flower Motiff in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 1\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 14 | Construction of Basalt Stone Galtha in Nevasa Basalt Stone of make \"Polygon Hardscape\" for Wall Cladding of size 9\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 15 | Providing and Construction of Basalt Stone Devali to be constructed in masonry, as per design approved by Architect, in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 15\" by 21\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 16 | Construction of Basalt Stone Animal Motiff in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Wall Cladding of size 21\" by 24\", Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 17 | Construction of Ashlar Basalt Stone Masonry in Nevasa Basalt Stone of make \"Polygon Hardscape\" for Steps, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge.(Nevasa Basalt Stone Steps, rectangular in shape consisting of 6\" risers and 12\" tread with edges of stone machine cut and champher finish towards the inner side, top surface to be plain and finely hand chisled and base to be rough.) |
| 18 | Construction of Ashlar Basalt Stone Masonry in Nevasa Basalt Stone of make \"Polygon Hardscape or Equivalent\" for Arch, 150 to 200 mm thick, Fine Tooled, Matt Finish set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 19 | Construction of Basalt Stone gargoyle in Nevasa Basalt Stone of make\"Polygon Hardscape or Equivalent\" for Wall Cladding of size 8” by 8”, Fine Tooled, set in cement mortar (1:3) with Closed Joints not exceeding 1 to 2 mm in width, as specified and directed, cleaning with water and diluted solution of acid, etc complete as per the direction of person in charge. |
| 20 | ELECTRICAL CABLE WORK |
| 21 | Supply, Installation, Testing and Commissioning of 8 Way 7Segment DB |
| 22 | 3 C X 2.5 SQ.MM. Cu conductor PVC insulated PVC sheathed FRLS cable ( For flexible cables, use PG Type Plastic Waterproof Nylon Cable glands, IP 68.) |
| 23 | 3 C X 4 SQ.MM. Cu conductor PVC insulated PVC sheathed FRLS cable ( For flexible cables, use PG Type Plastic Waterproof Nylon Cable glands, IP 68.) |
| 24 | Supply, fabrication & installation of M.S. angle / channel supports for installation including necessary painting with 2 coats of primer & 2 coats of enamel paint & required hardware for fixing of supports etc. complete. |
| 25 | ELECTRICAL LIGHT FITTINGS |
| 26 | Recessed Wall Light : (Size-82 L X 82 H X 73 D mm)Luminaires Body Housing High-pressure Die Cast Aluminium alloy body and components. Coating Process Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. Diffuser Impact resistant safety tempered glass cover.Gasket Weather resistant silicone gasket. External screws External screws are in stainless steel with protection grease. Cable Entry Cable entry protected by weather proof grommet.Specifications- LED Light, Unit Watage - 2, CRI/ UGR - CRI 80, Lumen - 240, Colour tempt - 3000K, Beam Angle - Asymmetrical, Control type - Remote On/Off |
| 27 | Exterior Recessed-Bult-In :(Size-14.5 L X 18.5 H mm)IP67 flexible dot free linear LED light line. Opal polyurethane encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gazes and protection against abrasion. IP67 ingress. Light source assembled Reel to Reel (R2R) production process. Prefer Tj Away® thin flexible circuit board technology.In combination with ceramic LED packages a thermal resistivity of 45.5 K/W is required for an optimal heat dissipation. 24 Volt System, Top View Specifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - 290 Lm/M, Colour tempt - 3000K, Beam Angle - Diffuse, Control type - Remote On/Off |
| 28 | Surface Floor :(Size - Dia - 120 mm) Spotlight designed to use LED lamps and a Wide Flood optic. aluminium alloyThe following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. 5 mm thick tempered sodium-calcium closing glass. Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane. Complete with a monochrome LED circuit and an Opti Beam Reflector optic system. The product includes a PG13.5 cable gland. Electronicballast integrated in product. Option of using optic accessories assembled via an accessory holder frame. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 28, CRI/ UGR - CRI 80, Lumen - 2342 lm, Colour tempt - 3000k, Beam Angle - 62°, Control type - Integrated On/Off |
| 29 | Surface Floor light Fixture :(Size - Dai 90 mm)Spotlight designed to use LED lamps and aFlood optic, aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing,Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane. Complete with a monochrome LED circuit . The product includes cable gland. Electronicballast integrated in product.. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 10, CRI/ UGR - CRI 80, Lumen - 481, Colour tempt - 3000k, Beam Angle - 40° , Control type - Integrated On/Off |
| 30 | Lamps with innovative LED \"filament\" technology • Design, dimensions, luminous flux comparable to an incandescent or halogen lamp • No UV and near-IR radiation in the light beam • Instant 100 % light, no warm-up time • Can be easily fitted instead of ordinary light bulbs • Lower thermal output (compared with the standard reference product)Specifications- LED Light, Unit Watage - 1, CRI/ UGR - CRI 80, Lumen - 96 lm, Colour tempt - 2700k, Beam Angle - 300°, Control type - Remote On/Off |
| 31 | Recessed Ground Light :(Size - 1073 L X 55 W X 74 D)Direct light luminaire, a flood optic with non-slip glass. Ground-, wall recessed. Consists of a body and outer casing for nstallation, . Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following ainting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. ower PPS (polyphenylene sulfide) box for control gear.optical ssembly is closed by an 8 mm thick non-slip glass screen . 24V intelligent driver that ensures light flow emission is constant even when the input voltage varies (from 30V dc to 16V dc).. All external screws used are made of A2 stainless steel.Specifications- LED Light, Unit Watage - 13, CRI/ UGR - CRI 80, Lumen - 1130, Colour tempt - 3000k, Beam Angle - 46°, Control type - Integrated On/Off. |
| 32 | Recessed Ground Light :(Size - Dia 38 mm)Housing Anodized aluminium, Steel, Brushed Steel. Installtion Housing recessed with housing box AISI 316L stainless steel trim, transparent tempered glass and PMMA lens. Housing have provision to carry the maintenance cable Round Shape, 24V DC system Constant voltage 2W - 24Vdc, Specifications- LED Light, Unit Watage - 5, CRI/ UGR - CRI >90, Lumen - Delivered 155 lm, Colour tempt - 3000k, Beam Angle - Narrow 10° Fix, Control type - Remote On/off. |
| 33 | Surface Ceiling Light : (Size - 193 H X 145 W X ø83 front X ø120 Base) Spotlight designed to use LED lamps and a Medium optic. The optical assembly and base is made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. 5 mm thick tempered sodium-calcium closing glass. Double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Mechanical aiming locks for rotation on both the vertical axis and horizontal plane.Specifications- LED Light, Unit Watage - 1, CRI/ UGR - CRI 80, Lumen - 1450 LM, Colour tempt - 3000k, Beam Angle - Adjustable 26°, Control type - Remote On/ Off. |
| 34 | Surface Ceiling Light in-ground driveover LED up- light with a height of only 35mm, designed for optical excellence and engineered for complete resilience. Caliber 25 XS offers a choice of four colour temperatures as standardand delivers 90CRI for excellent colour rendering, and with binning-free LEDsSpecificationsLED Light, Unit Watage - 1, CRI/ UGR - 1 W 94 lm, Lumen - 3000k, Colour tempt - Diffuse, Beam Angle - remote, Control type - Housing, Gel connector. |
| 35 | FRP & GRC WORK |
| 36 | Staue - (Life Size Statues) - Making of other fiber statue of fire-retardant resin. [fr]. All statue is in life size as per designs with approx. 3 to 4 mm thickness. The specifications of fr resins - 1) fr resin, 2) hardener, 3) mention polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alkon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) fiber is supported with galvanized iron metal 45mm x 45mm GI pipe of 14 gauge ISI mark, 17) weight of statue 38 kg. 18) duco wheather proof colour, 19) making of statue will be done in workshop and transported on siteand fitting on pedestal. All statues are with 12 mm metal base plate 20) maintenance of statues should be there in all sense up to 1 year, 21) life of statues should be 15 years to 20 years if it should be stand as it is without any damaged, 22) damaged due to natural calamities and uncertainties of any incidence on site is excluded.Making of clay statue as per approved design. Preparation of respective molds. And casting of pieces in fire resins. fiber pieces were joints with each other by glass fiber. GI skeleton is inserted for strengthening of fiber. statue joints will smoothen and finished with grinder and polish papers. Colour - oil base primer coat is laid on statue. Then duco lambi is layed for finishing and then two layers of duco colour is sprayed on it. Then shedding detailing work done on it. |
| 37 | Megh dambari-(L 23.35\" x B 23.35\" x HT 34.21\") - Making of fiber Meghdambari of fire retardant resin as per design. The specifications of fr resins material - 1) fr resin, 2) hardener, 3) mention polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alkon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) ISMC channel box, 17) fr dome, arches , brackets, cornice and Chajja will supported with 30mm and 45mm GI tubes of 14 gaze thickness, 18 ) Meghdambari will finish with copper metallic color, 19) maintenance of Meghdambari should be there in all sense up to 1 year 20) life of Meghdambarishould be15 years to 20 years if it should be stand as it is without any damaged, 21) damaged due to natural calamities and uncertainties of any incidence on site is excluded. Preparation of clay elements and preparation of molds of arches, pillars. Domes and cornices as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof colour of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 38 | Elephant - (L 9.5\" x W 3\" x HT 7\") - Making of elephant of fire retardant resin. [fr]. All elephant sizes as per designs the specifications of fr resins - 1) f r resin, 2) hardener, 3) mention polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alkon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) fiber is supported with galvanized iron metal 45mm x 45mm GI pipe of 14 gauge ISI mark, 17) duco weather proof colour, 18) elephant will prepare in workshop and transport on site and fitting on pedestal, 19) all elephant is with 12 mm metal base plate, 20) maintenance should be there in all sense up to 1 year, 21) life of elephant should be 15 years to 20 years if it should be stand as it is without any damaged, 22) damaged due to natural calamities and uncertainties of any incidence on site is excluded.Preparation of clay elements and preparation of molds of arches, pillars. Domes and cornices as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof colour of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 39 | Elephant - (L 16\" x W 5\" x HT 10\") - Making of elephant of fire retardant resin. [fr]. All elephant sizes as per designs the specifications of fr resins - 1) f r resin, 2) hardener, 3) mention polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alkon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) fiber is supported with galvanized iron metal 45mm x 45mm GI pipe of 14 gauge ISI mark, 17) duco weather proof colour, 18) elephant will prepare in workshop and transport on site and fitting on pedestal, 19) all elephant is with 12 mm metal base plate, 20) maintenance should be there in all sense up to 1 year, 21) life of elephant should be 15 years to 20 years if it should be stand as it is without any damaged, 22) damaged due to natural calamities and uncertainties of any incidence on site is excluded. Preparation of clay elements and preparation of molds of arches, pillars. Domes and cornices as per approved design. Molds of different items will prepare. Then casting is done in fr glass fiber material. Cleaned and finished material provided with three coats of water proof colour of approved manufacture. Final colour finishing will done after fixing on site. Structure will erect with bolting and welding is done on necessary places. |
| 40 | Samai - (Height 10\") -Providing traditional Samai of size 10\" ft high and ft base with metal base plate of 12 mm thickness for fixing on site as per approved design. The specifications of fr resins - 1) fr resin, 2) hardner, 3) mension polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alkon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) inside supported with galvanize iron tube, 17) colour will be as per approved shades, 18) weight is approximate 280 kg, 19) thickness of fiber is approx. 3 to 4 mm, 20) maintenance should be there in all sense up to 1 year, 21) life of Samai should be 15 years to 20 years if it should be stand as it is without any damaged, 22)damaged due to natural calamities and uncertainties of any incidence on site is excluded.Traditional Samai will made of fr fiber glass. It will erect by inter locking 6 parts of Samai with help of central 3\" Gi 14 gaze pipe.Cleaned and finished material provided with three coats of water proof colour of approved manufacture. |
| 41 | Canon - (L 6\" x W 3\" X HT 2.5\") Providing fr glass fiber cannon with metallic colour as per approved design. The specifications of fr resins - 1) fr resin, 2) hardener, 3) mention polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) Alcon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) inside supported with galvanize iron tube, 17) colour will be as per approved shades, 18) weight is approximate 280 kg, 19) thickness of fiber is approx. 3 to 4 mm, 20) maintenance should be there in all sense up to 1 year, 21) life of cannon should be 15 years to 20 years if it should be stand as it is without any damaged, 22) damaged due to natural calamities and uncertainties of any incidence on site is excluded. Fr glass fiber cannon fix on two wooden carts coated with 1.5 mm thick fr glass fiber. |
| 42 | Scissor Lift -(1.5 mtr x 2.4 mtr)Scissor lift1) Extension Deck, Electric Line to Platform, Spring applied Hydraulic Release Brakes 2) Maintenance should be there in all sense up to 1 year 3) Life of Lift should be 7 years to 8 years if it should be stand as it is without any damaged4) Damaged due to Natural calamities and uncertainties of any incidence on site is excluded. This is customed lift so making will be according to the lift size. ISI Standard company make |
| 43 | Maha Dwar - (L 9.21\" x B 23\" x HT 18\")Metal skeleton of GI tube with fire retardant fiber glass. Cladding on MS columns and ISMB with profile sheet tin on roof. The specifications of fr resins - 1) fr resin, 2) hardener, 3) mansion polish, 4) acetones, 5) aerosil powder, 6) polish paper, 7) hp khara powder, 8) binani matt, 9) alcon paper, 10) cobalt, 11) brush of various sizes, 12) bucket, 13) cotton saree, 14) pigment, 15) cutter blade, 16) inside supported with galvanize iron tube, 17) colour will be as per approved shades, 18) thickness of fibre is aprox 3 to 4 mm, 19) maintenance should be there in all sense up to 1 year, 20) life of mahadarwaja should be 15 years to 20 years if it should be stand as it is without any damaged, 21)damaged due to natural calamities and uncertainties of any incidence on site is excluded.First will metal skeleton will be erected. Fiber Glass cladding will be fixed on Metal Skeleton. Coloring and finishing and roof in profile sheet material |
| 44 | Shifting of existing statue - Removing of Existing Statue and shifted in New proposed place in islandwith help of laborer , Machinery and other required material. |