|
| 1 | Item No.1: Excavation in all kinds of soil including boulders upto 0.6 m. diameter (0.113 cum) for canal seating of embankment, filter drains/ catch water drains etc. and placing the excvated stuff neatly in dump area or for formation of service road/embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with lead upto 15 m.and all lifts as directed. |
| 2 | Item No.2: Providing and laying in situ cement concrete of grade M-15 of trap/ granite/ gneiss/ quartzite/ graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with concrete Mixer with shuttering and scaffolding, placing, compacting curing with an initial lead of 1 km and all lifts etc. complete as directed (A) M-15 (20 MSA) (Cement 5.64 bags/cum) |
| 3 | Item No.3: Providing and laying in situ cement concrete of grade M-20of trap/ granite/ gneiss / quartzite/ graded metal for RCC work of gallery, sluice, spillway crest, spillway downstream face, energy dissipating tructures, intake structures, training walls, piers, abutments, slab etc. with concrete Mixer including shuttering and scaffolding, placing, compacting, curing with an initial lead of 1km. and all lifts etc. complete. as directed (A) M-20 (20 MSA) (Cement6.60 bags/cum) |
| 4 | Item No.4: Providing structural steel (ISWB 150 x 100 mm.) in rolled section like joints, angles etc. as per detailed design and drawing including fixing in position with hold fasts, including oil paint with two coat including one coat anticorrosive paint etc complete (for sill beam 150 x 100 ) |
| 5 | Item No.5: Providing and laying cement plaster 6 mm. thick in C.M.1:3 single coat without neeru finish to concrete surface in all position including scaffolding, curing, including etc. complete as directed (cement 0.057 bags/sqm.) |
| 6 | Item No.6: Providing and constructing 300mm. Thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source includign cost of all materials, labour, hand packing/ edging stone chips finishing etc. complete wth lead upto 50 m. and all lifts as directed. |
| 7 | Item No.7: Providing and fixing structural steel for M.S. Gate including cutting, bending, hooking, laying in position and tying M.S./HYSD/ TMT bars with binding wire for reinforcement of RCC work as per detailed drawing etc. complete with all lead and lifts as directed. |
| 8 | Item No.8: Providing \"X\" Ray quality M.S. welding in all positions with required number of runs, for M.S. pipes internally and/ or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification, using electrodes having weldmark E7018 (Low hydrogen electrodes), including surface preparation (i.e. Removal of scale, cleaning etc.) including all materials, labour, equipments, etc. complete (welding 6mm. thick) |
| 9 | Item No.9: Providing and applying primer Red Oxide Paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. complete. |
| 10 | Item No.10: Providing and fixing Rubber seal (size 60 x 20 mm.) for M.S. Gate including cutting, laying in position, tying with nut and bolts work as per detailed design and drawing etc. including binding wire with all lead and lift as directed etc.complete. |
| 11 | Item No.11: Providing and fixing in position mild steel Needcle of 2120 x 500 x 4 mm. thick size, fabricated with mild steel plate, intermidiate verticle stiffeners, horizontal stiffereners, angle cleats, mild steel plate packing for nut bolts and lifting hooks etc including cutting, fabricating, hoisting, erecting, fixing in position, making rivetted/ bolted/ welded connection and painting with two coats of anticorrosive lead based oil paint with primer coat including testing at site etc. complete with leads and lifts and as per detailed specifications, designs and drawings or as directed by the Engineer in charge |
| 12 | Item No.12: Providing Earth work to side guide bund with all leads and lifts etc. complete as directed |
| 13 | Item No.12: Providing and fixing canal information baord of 1.2 x 0.75 m. prepared on 16 guage M.S. sheet with angle iron frame of size35 x 35 x 3 mm. with cross bracing of size25 x 25 x 3 mm. including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enamelled bonded with red retro reflective sheet engineering grade, border/ letters/ numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size50 x 50 x 5 mm. of 3.65 m. long inflated at bottom drilled on top and painted in white and black bonds of 30cm. with four numbers high strength of G.I. bolts and nuts of size 10 mm. dia. and 20 mm. long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15block of size 60 x 60 x 75cm. as directed by Engineer in charge |