Road And Building Department-RBD has published Re-Construction Of Conference Hall And Store Room With Rcc Roof After Demolishing The Existing Dilapidated Sloped Ac Sheet Roof For Ghumusara Tahasil Office Building At Bhanjanagar. Building Work. Submission Date for this Tender is 20-11-2021. Building Work Tenders in Bhanjanagar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling A.C.C / G.C.I. sheet roofing after careful removal of the bolts and nuts including stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge. |
| 2 | Dismantling wrought and framed timber in roof frame work of floors after careful removal of nails, bolts etc. and stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge. |
| 3 | Dismantling brick or stone masonary in lime or cement mortar below 10" height including stacking the useful materials for reuse and removing the debris with 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge. |
| 4 | Removing old lime or cement plaster from walls including raking out joints 12 mm. Deep (1/2) and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge. |
| 5 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9") thick layers including watering and ramming with cost, conveyance, royalties, labour and labour cess with T&P required for the work etc complete as per the direction of the Engineer-in-charge. |
| 6 | Cement concrete of proportion (1:3:6) in foundation and floors using 4 cm (1.5") size clean hard hand broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm (6") thick to required level ramming, watering, curing etc. complete including cost and conveyance of all materials with royalties, labour, labour cess and T&P required for the work etc. complete including dewatering if required. |
| 7 | Cement concrete (1:2:4) using 12 mm size hard crusher broken granite chips of approved quality from approved quarry including all cost, labour, labour cess, T&P, royalties, conveyances etc. complete as per direction of the Engineer-in-charge. |
| 8 | Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Foundation and plinth using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cesswith T&P required for the work with all royalties etc. complete in all respect. |
| 9 | 25 mm (1") damp proof course with cement concrete (1:2:4) using 12 mm size crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering curring cost and conveyance of all materials, royalties etc. with all labour, labour cess and T&P required for the work etc. complete including side shuttering as per direction of the Engineer-in-charge. |
| 10 | Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in superstructure using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cesswith T&P required for the work with all royalties etc. complete in all respect. |
| 11 | R.C.C. work in Lintel of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance ofM.S rods or Tor steel and bindingwire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel andbinding wire tying the grills and placingin proper position. |
| 12 | R.C.C. work in Chajja of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance ofM.S rods or Tor steel and bindingwire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel andbinding wire tying the grills and placingin proper position. |
| 13 | R.C.C. work in Roof Beam of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance ofM.S rods or Tor steel and bindingwire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel andbinding wire tying the grills and placingin proper position. |
| 14 | R.C.C. work in Roof Slab of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance ofM.S rods or Tor steel and bindingwire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel andbinding wire tying the grills and placingin proper position. |
| 15 | R.C.C. work in 50 mm th. pre-cast jally of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance ofM.S rods or Tor steel and bindingwire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel andbinding wire tying the grills and placingin proper position. |
| 16 | Straightening bent up or coiled rods (HYSD) cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.) |
| 17 | 2.5 cm thick grading concrete (1:2:2:) on roof slabwith 6 mm size hard crusher broken granite chips including all cost, conveyance and royalties of materials with labour, labour cess and T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 18 | 12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge. |
| 19 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including close deep chipping and slurry treatment including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge. |
| 20 | 16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge. |
| 21 | Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of plain (Ivory) in approved make conforming to IS 13756 laid on 20mm thick cement mortar (1:4) (1cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess and T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 22 | Supplying, fitting and fixing of Vitrified tile in dadoes of size 600mm x 600mm of plain (Ivory) in approved make conforming to IS 13756 laid on 20mm thick cement mortar (1:4) (1cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess and T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 23 | Supplying Fitting and fiixing in position well dressed and wellseasonedsal wood work framed and fixed ( wrought and put up ) in choukaths for doors windows and ventilators including cost of ironof works and coal taring 2 coats wall side faces of Choukaths including cost of coaltar, cutting grooves and mending sizes where necessary wih cost and conveyance royalties and taxes of all materials, labour and labour cess with T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 24 | Supplying of M.S. Window grill / M.S. Fixed Grill / M.S. grill gate made out of M.S. angle, M.S. flat & M.S. square etc including cutting, welding, all labour, labour cess and T&P etc complete as per direction of Engineer-in-charge |
| 25 | Supplying of M.S Panneled Door double leaved with M.S. frames (35x35x6 mm M.S. Angle), top and bottom rail (25x25x3 mm M.S. Angle), door pannel with 1.00 C.R. sheet, pannel stiffner covering width of each leaf 19 x 5 mm, M.S.flat 3 Nos. on each leaf, hinges 6 nos of size 100 mm (3 nos. on each side) bought out as per ISS. Hold fast 3 nos on each side of 35 x 35 x 6 mm M.S. Angle 175 mm length bifurcated at the tip, with 4 nos fabricated Handle (19x5 mm M.S. Flat), 2 nos Aldrop bought out as per ISS & 2 nos Tower bolts as per approved design & direction of Engineer-in-charge, including cost, conveyance, labour cess and labour charges of all materials etc. complete. |
| 26 | Supplyingof M.S. pannelled window double leaved with M.S. Frame ( 35 x 35 x 6 mm M.S Angle), shutter style -Top & bottom rail with 25 x 25 x 3 mm M.S. Angle, window pannel with 1.00 mm C.R. sheet, Pannel stiffner covering width of each leaf 19 x 5 mm M.S. Flat 2 nos of each leaf, Hinges 4 nos of size 100 mm. ( 2 nos on each side) bought out as per ISS, Hold Fast 2 nos. on each side with 35 x 35 x 6 mm angle 100 mm. length bifurcated at tip, with 2 nos fabricated handle (19x5 mm M.S. Flat), 4 nos tower bolt bought out as per ISS and Horizontal grills of 12 mm M.S. Round at 100 mm. spacingas per approved design and direction of Engineer-in-charge including cost and conveyance of all materials with all labour, labour cess and T&P required for the work etc. complete |
| 27 | Labour charges for fitting and fixing of M.S. Door, Window, Fixed Grill & Gate, Rolling shutter etc. in proper position including making holes in walls, RCC structures and wood work etc. and making good to the damages to walls or RCC structure including mending or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with HB granite chips of 12mm size with cost and conveyance of all materials, royalties, labour, labour cess and T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 28 | Supplying,fitting,fixing up window (sliding type) made up aluminium section 9778 as windows frame, section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, labour, labour cess, T&P etc. complete but excluding cost of 5 mm th. black glass as per direction of the Engineer-in-charge (weight will be taken for Al. sections only without fittings). |
| 29 | Supplying of 5mm thick Black Glass including cutting to required sizes for fixing in Al. window including labour cess as per direction of the Engineer-in-Charge. |
| 30 | Providing, fitting, fixing of Aluminium Door with anodized Aluminium door section of 9202 as vertical member, 9201 as top member, 9200 as bottom and middle member and 6mm thick black glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame fitted with rubber bidding,with frame section no. 9221 and tappered clip No.4660 and the frame to be completed by means of jointing angle No.1855,with locking arrangement with 6 lever mortise lock, door stoper, handle etc. complete including cost of all material, labour, labour cess, T&P, hire charges of of drilling machine, labour charges etc. complete but excluding cost of 6mm thick black glass and 12mm thick pre-laminated board as per direction of Engineer-in-charge (Weight will be taken for Al. sections only without fittings). |
| 31 | Supplying of 12mm. Thick Pre-laminated particle Board (standard type) (I.S.I.) including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge. |
| 32 | Supplying of 6mm thick Black Glass including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge. |
| 33 | Painting two coats with any approved paint over a coat of priming to new iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials, labour and labour cess with T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge. |
| 34 | Painting two coats with any approved paint over a coat of priming to new wood work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials, labour and labour cess with T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge. |
| 35 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, labour, labour cess, T&P etc. complete as per direction of Engineer-in-Charge. |
| 36 | Wall painting two coats to wall surface with any approved Plastic Emulsion paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge. |
| 37 | Distempering two coats to wall surface with any approved Distemper paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge. |
| 38 | Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
