Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-12-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-12-2021 |
| 2 | 24-11-2021 | Revised pages | BOQ | 06-12-2021 |
| 3 | 24-11-2021 | Revised pages | Other | 06-12-2021 |
| 4 | 22-11-2021 | Postponed of dates | Date | 06-12-2021 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge. |
| 2 | Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge. |
| 3 | Supply and fixing solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 4 | Supply and fixing 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides , BWP, including applying french polish to match sunmica lamination, all as specified & directed by Engineer-in-charge. |
| 5 | Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 6 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 7 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. |
| 8 | Removal excavated soil to a distance not exceeding 50 m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point complete all as specified & directed by Engineer-in-Charge. |
| 9 | Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed. |
| 10 | Demolition of cement concreteunreinforced in ground floor or any floor level, terrazo flooring, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed |
| 11 | Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed. |
| 12 | Material and labour for 75mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed. |
| 13 | Material and labour for 100mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed. |
| 14 | Material and labour plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete, bed blocks etc, complete all as specified & directed. |
| 15 | Material and labour for 75mm thick cement concrete type B-0, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base finishing even and fair to receive to top layer complete all as specified & directed. |
| 16 | Material and labour,plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed. |
| 17 | Material and labour reinforced cement concrete 1:2:4, Type B1 (using 20mm graded aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 18 | Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 19 | Material and Labourmild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed. |
| 20 | Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified. |
| 21 | Demolition of brick work, stone/ bouldermasonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articlesall as specified & directed by Engineer-in-charge. |
| 22 | Material and Labourbrick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed. |
| 23 | Material and Labourbrick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 24 | Material and LabourBrick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm)old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 25 | Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed. |
| 26 | Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 450mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 27 | Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 28 | Material and labour machine cut Kota Stone Slab flooring, 20 to 25mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed. |
| 29 | Material and labour machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as inin skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified. |
| 30 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed. |
| 31 | Material and labour 10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 32 | Material and labour 15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even without using extra cement complete all as specified and directed |
| 33 | Material and labour Rendering 15mm thickon fair faces of brick work or concrete surfaces, finished even and fairon walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified.Note : WPC shall be measured and paid separately. |
| 34 | Material and labour 5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng |
| 35 | Material and labourTwo coats of white washing on old wall surfaces including preparation ofceling surfaces complete all as specified and directed. |
| 36 | Material and labourTwo coats of white washing on old ceiling/chajja surfaces including preparation ofceling surfaces complete all as specified and directed. |
| 37 | Material and labourThree coats of white washing on newwall surfaces including preparation of complete all as specified and directed. |
| 38 | Material and labourThree coats of white washing on newceiling/chajja surfaces including preparation of complete all as specified and directed. |
| 39 | Material and labourpreparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 40 | Material and labour preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint upto hieght of three storey bldg, complete all as specified and directed. |
| 41 | Material and labour for two coats of oil bound distemper including priming paint and preparation of new wall surfaces complete all as specified and directed. |
| 42 | Material and Labourpreparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 43 | Material and Labourtwo coats of synthetic enameled painton steel and iron surfacesover 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed. |
| 44 | Supply and fixing for 15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed. |
| 45 | Supply and fixing for 20mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed. |
| 46 | Supply and fixingwash hand basin, vitreous china, flat back , white , ofsize550X400mm, including angle brackets, fixed as in repair complete all as specified and directed. |
| 47 | Supply and fix in repair, vitreous china squatting pan \"orissa\" pattern,size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge. |
| 48 | Supply and fix in repair vitreous china wash downwater closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface,complete all as specified. |
| 49 | Supply and fix, as in repair, steel window, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:-(a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side).(b) Handle of \"Z\" section 20mmx25mm, 100mm long- 01No. each leaf.(c) MS tower bolt 150mm long- 02 Nos. each leaf.(d) \"Z\" section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf.(f) MS box type hinges of 75 mm size- 02Nos. per leaf.(g) Fabrication & fixing complete.Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawingbefore fabrication and bulk order to the manufacturer. |
| 50 | All as per serial item No 49 hereinbefore but without glazing bar. |
| 51 | All as per serial item No 49 hereinbefore butventilator fixed type with glazing bars, in repair complete all as specified & directed. |
| 52 | Supply and fix framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge. |
| 53 | Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties;plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified. |
| 54 | Demolition of cement Concrete of any description and in any position not otherwise specifically(in sunken portion)directed complete all as specified by Engr-in-Charge. |
| 55 | Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, , complete all as specified & directed. |
| 56 | Material and labour water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :-(a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer\"s instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours.(c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours.(d) Pond curing of sunken portion for minimum of 48 hours.(e) Pasting 200 micron thick polythene film with approved adhesive.(f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound. |
| 57 | Supply and fix PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed in repair complete all as specified and directed. |
| 58 | Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed in repair complete all as specified and directed |
| 59 | Supply and fixing PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed in repair complete all as specified and directed |
| 60 | Supply and fix 110mm bore PVC (SWR) bends any radiusfixed in repair complete all as specified and directed. |
| 61 | Supply and fix 75mm bore PVC (SWR) bends any radiusfixed in repair complete all as specified and directed. |
| 62 | Supply and fix 110 mm dia PVC (SWR)junction single ( single T ) equal or unequal fixed in repair complete all as specified and directed. |
| 63 | Supply and fix 75 mm dia PVC (SWR)junction single ( single T ) equal or unequal fixed in repair complete all as specified and directed. |
| 64 | Demolition and breaking up drain pipes (Salt glazed stone ware / AC/RCC drain pipe etc) internal dia of pipe 200mm. Set in cement mortar including PCC packing in bed and hunching complete all as specified and directed (excavation and earth work shall be measured and paid separately). |
| 65 | Material and labour for RCC pipes class NP2200mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthworkand PCC shall be measured and paid for separately) |
| 66 | Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (110mm bore pipe) after the pipe are laid and tested complete all as specified and directed. |
| 67 | All as per serial item No 66 herein before but 200mm bore of pipe –ditto- |
| 68 | Material and labour for factory made RCC (Medium duty), M-35 reinforcement steel as per IS 456, pre cast man hole covers of size 600mm x 600mm x 75mm with plain faces, includingMS frame, set in positioncomplete all as specified. |
| 69 | All as per serial itemNo 68 hereinbefore but size 600mm x 1200mm x 100mm thick |
| 70 | All as per serial itemNo 68 hereinbefore but size 600mm x 1400mm x 100mm thick NOTE : The rates quoted against items 68 to 70 shall be inclusive of steel reinforcement, MS frame complete |
| 71 | Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed with tinned tacks / stainless steel wire staples, fixed in repair, complete all as specified & directed. |
| 72 | Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge. |
| 73 | Supply and fix 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 74 | Supply and fix 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 75 | Supply and fix beveled edged looking mirror of size 600mmx450mm of selected quality mounted on 6mm thick ply /board fixed to wall with screw and rawl plugs, fixed as in repair complete, all as specifiedand directed. |
| 76 | Supply and fix 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from siteall as specified in SSR Part-I and all as directed by Engineer-in-charge. |
| 77 | Supply and fix bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 78 | Supply and fix for 15mm bore pillar tap, long body with quarter turn, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed. |
| 79 | Supply and fixingin repair chromium plated, fancy type shower rose with swivel joints 125mm dia withshower arm brass CP195mm long with bend of 45 degree and fixing to steel pipe 15mm bore and fixed complete all as specified and directed. |
| 80 | Supply and fix stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 81 | Supply and fix angular stop cock, brass,cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. |
| 82 | Supply and fixingstop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union, fixed as in repaircomplete all as specified & directed by Engineer-in-charge. |
| 83 | Supply and fixingstop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for union, fixed as in repaircomplete all as specified & directed by Engineer-in-charge. |
| 84 | Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified. |
| 85 | Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 150mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified. |
| 86 | Supply and fix Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified. |
| 87 | Supply and fixingMild steel sliding door bolts (ISI Marked), 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, all as specified & directed by Engineer-in-charge. |
| 88 | Supply and fix Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified. |
| 89 | Material and labour for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size),fixed as in repair complete all as specified and directed. |
| 90 | Supply and fixing for tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws fixed as in repair complete all as specified & directed by Engineer-in-charge. |
| 91 | Supply and fixPVC (SWR) floor trap, plain with grating includingjointing with solvent cement100mm bore, including jointing to waste pipe set in cement concrete type ,fixed as in repair complete all as specified. |
| 92 | Supply and fixing vitreous china bowl urinal flat back, half stall type, white with grating and union for discharge pipe including all fixing accessories and waste pipe, complete all as specified and directed. |
| 93 | Supply and fixing for CP pressure jet for western type water closet with PVC connections 600 to 900mm long including brass head screw and suitable washer, fixed as in repair,complete all as specified & directed by Engineer-in-charge. |
| 94 | Supply and fixPVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed. |
| 95 | Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed. |
| 96 | Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified. |
| 97 | Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 75mm size, ISI marked, complete all as specified. |
| 98 | Supply and fix in repair 600mm long stainless steel peg stay complete all as specified and directed. |
| 99 | Supply and fix 32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed. |
| 100 | Supply and fix in repair stainless steel soap dish any type fixed to plugs with screws complete all as specified and directed. |
| 101 | Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified. |
| 102 | Material and labour reinforced cement concrete (M-25, using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 103 | Material and labour for RCC (M-25, using crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 104 | Material and labour for reinforced cement concrete (M-25, using crushed stone aggregate) as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 105 | Material and labour for reinforced cement concrete (M-25, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roofs, canopies shelves and the likecomplete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 106 | Material and labour for reinforced cement concrete (M-25, using 20mm graded crushed stone aggregate) as in chajja and the like, complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 107 | Material and labour for form Work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter to give rough finish to flat surfaces complete all as specified and directed. |
| 108 | Material and labour for form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetcrough finished surface of concrete flat complete all as specified and directed. |
| 109 | Material and labour for form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed. |
| 110 | Material and labour for form work to sides and soffits of floor or roof beams, beam hanunchings, girders, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surface of concrete flat complete all as specified and directed. |
| 111 | Material and labour for form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetcrough finished surface of concrete flat complete all as specified and directed. |
| 112 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 113 | Material and labour Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified. |
| 114 | Material and labour for Hard core ofbroken stone or boulders of gauge of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 115 | Supply and fix Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,including fill of PCC 1:3:6 complete all as specified and directed. |
| 116 | Material and labour for 15mm average thick cement plaster in cement mortar 1:4 on RCC surfaces / brick surfaces of walls / ceiling of RCC facia, RCC parapet wall, cornices, ceiling etc exc including necessary form work / scaffolding as requiredcomplete all as specified and directed |
| 117 | Material and labour3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed. |
| 118 | Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. |
| 119 | Supply and fix for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge |
| 120 | Supply and fix pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge. |
| 121 | Material and labour for machine coloured pressed precast concreteinterlocking paver block, with grey cement and pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade, set and jointed in neat cement slurry and pointed in grey cement over 25mm thick sand cushion complete all as specified and directed |
| 122 | Material and labour for machine coloured pressed precast concreteinterlocking paver block, with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 40mm thickness, M-35 grade, set and jointed in neat cement slurry and pointed in grey cement over 25mm thick sand cushion complete all as specified and directed |
| 123 | Material and labour plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed by Engineer-in-charge. |
| 124 | Supply and Fixing mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed. |
| 125 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 126 | Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 125 here-in-before.(ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor\"s authorised rep and shall be kept in record. |
| 127 | Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank5 to 10mm, complete all as specified and directed. |
| 128 | Material and labour for mild steel round bars 10mm dia and over, cut to length fixed in chain link fencing complete all as specified. |
| 129 | Material and labour for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer onprimer on surfaces of any description n.exc 10 cmwidth or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed. |
| 130 | Material and labour forpreparation of new decorated concrete surface exc 10 cm width or girth and applying two coats of synthetic enameled paint complete all as specified & directed. |
| 131 | Material and labour for 2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts, nuts, bituminous washer as in roof, complete all as specified and directed. |
| 132 | Supply and fixing, factory made glazed / polished chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 133 | Material and labour for precast kerb stone edging using factory made PCC blocks (M-20 concrete) of size 300mmx300mmx100mm (laid with width equal to 100mm), set and jointed in cement mortar 1:4 including necessary excavation and earth work, fixed as in repair complete all as specified and directed. |
| 134 | Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socketor power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed. |
| 135 | Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steelsunken boxes 1.2mm thickness covered with provision of3mm thick plastic laminated sheet, comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed.Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the originalfinishes surface and nothing extra shall be paid on this account. |
| 136 | All as per serial item 135 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed |
| 137 | All as per serial item 135 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed |
| 138 | All as per serial item 135 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 139 | Supply & Fixing forswitch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge |
| 140 | Supply & Fixing for switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge |
| 141 | Supply & Fixing for sockets outlet multipurpose 5 pin, 6Amps flush type all as specifiedand directed by Engineer-in-charge |
| 142 | Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 16Amps flush type ISI marked all as specifiedand directed by Engineer-in-charge |
| 143 | Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. |
| 144 | Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 145 | Supply and fixing for 9W LED BULB B22 WHITEall as specified and directed.(Make :- C&S Cat part No:-LTHPLEDLAMP9WB22whiteorequivalent makes mentionedin Appx \"C\") |
| 146 | Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete all as specified and directed. |
| 147 | Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 10 watts capacity 2 feet long and white light and including connections from ceiling rose complete all as specified and directed. |
| 148 | Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge. |
| 149 | Supply and fixing sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.Note : (i)For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. |
| 150 | Disconnecting the power supplyand taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB\"s ,MCB\"s etcand remving from site, all as specified and directed by Engr-in charge. |
| 151 | Supply and fixing sheet metal enclosure DB\"s 240 Volts, IP-43, suitable for mounting MCB\"s, SPN,12 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge. |
| 152 | Supply & Fixing forMCB ,SPN, 240 volt, 63Amps, 10 KA , \"C\" series charactersticincluding connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. |
| 153 | Supply & Fixing forMCB ,SPN, 240 volt, 40Amps, 10 KA , \"C\" series charactersticincluding connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. |
| 154 | Supply & Fixing forMCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , \"B\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells or equivalentmakes mentionedin Appx \"C\". |
| 155 | Supply and fixMCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 8 way all as specified. |
| 156 | Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed. |
| 157 | Supply & fixing of 20 to 25 mm dia, rigid non metallic PVC concealed conduit medium grade heavy duty, \"ISI marked\", inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified |
| 158 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 159 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 corecomplete all as specified and directed. |
| 160 | Supply and fix 25mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed Make : Finolex / Duraline /Rex |
| 161 | Supply and fixing exhaust fan 380mm sweep, 240 volt, 50 Hz, with louvers heavy duty metal body, 900 RPM, single phaseincluding making connection with suitable sizetwin core cablecomplete all as specified and directed. MAKE : Havell\"s / BAJAJ/ Crommpton / Khaitan |
| 162 | Supply and fixing ceiling fan 1400mm sweep, 240 Volts , optimum performance double ball bearing fixing and connecting up with regulator and fixing with ceiling, complete all as specified and directed. Make : USHA/BAJAJ/ HAVELLS/KHAITAN/CROMPTON |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
