Military Engineer Services-MES has published Repair To Ac Cgi Sheet Roof False Ceiling Joinery And Sunken Floor And Allied Works At Certain Otm Accn At Mil Stn Agartala Repair To Ac Cgi Sheet Roof False Ceiling Joinery And Sunken Floor And Allied Works At Certain Otm Accn At Mil Stn Agartala. Submission Date for this Tender is 11-12-2021. False Celing Tenders in AGARTALA Tripura. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-12-2021 |
| 2 | 04-Dec-2021 | AMENDMENT IN DATE | Date | 11-12-2021 |
| Sl. No. | Item Description |
| 1 | Schedule"A" Part-I: B&R works |
| 2 | Taking down shutters of any description Exc 1.00Sqm and N.Exc 2.00 Sqm each all as specified and directed |
| 3 | S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutter open rebated and prepared to receive glass,guage etc but divided in to square with plain,chemfered or rounded, mitred sash bars, any number fitted with cut and mitred beads for securing glass etc,size of member of shutter as specified in SSRpart-I section -8 clause 8.24(a)all as specified and directed. |
| 4 | S&F for 2nd class hard wood 35mm thick panelled shutters (any number of panels) with panels of timber flat on both sides ( feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed. |
| 5 | S&F for Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed |
| 6 | S&F in repair Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed |
| 7 | Hacking out old broken glass( any thickness,size,quality) or description from wooden. Steel frame all as specified and directed. |
| 8 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty/beads in square N.exc 0.5Sqm in each pane all as specified and directed |
| 9 | S&F for 4mm thick figured glass, pin head type and glazing with oil putty/beads in squares n exc 0.5sqm in each pane all as specified and directed. |
| 10 | S&F M S butt hinges 100mm size medium weight cold rolled all as specified and directed |
| 11 | S&F in repairM S butt hinges 75mm size medium weight cold rolled all as specified and directed |
| 12 | S&F In repair 200mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed. |
| 13 | S&F in repair 150mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed. |
| 14 | S&F 200mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed. |
| 15 | S&Fextruded aluminium alloy handles fabricated type anodised 125mm long all as specified and directed. |
| 16 | S&Faluminium alloy, anodised sliding door bolt of size 300mmwith hesp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed. |
| 17 | S&F in repairaluminium alloy, anodised sliding door bolt of size 300mmwith hesp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed. |
| 18 | Welding in repairs exc 2.5cm but n.exc 5cm in length thickness of welding Exc 6mmbut Nexc 9mm in all as specified and directed. |
| 19 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over a coat of wood primer all as specified and directed |
| 20 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over a coat of red oxideall as specified and directed |
| 21 | Dismantling boarding, any description fixed in any position with nails all as specified and directed. |
| 22 | Dismantling structural steel work including doors gates but excluding framed truss etc all specified and directed. |
| 23 | S&F for hand rails, half round or other flat iron fillets (for securing wire mesh) including drilling bolting or riveting etc, and similar work confirming to Fe-290 Gde E-165 all as specified and directed. |
| 24 | M&L for 4mm thick asbestos cement plain building board, fixed to timber frame work with screws all as specified and directed. |
| 25 | Dismantling of plain or corrugated steel sheeting, any gauge thickness. including nainital or similar pattern roof coverings all as specified and directed. |
| 26 | M&L for Galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs walls etc with grade of zinc coating all as specified and directed . |
| 27 | M& L for Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water toremove dust etc including taking down tarfelt and brushing applying neat cement slurry @ 3 Kg/Sqm of cement mixed with liquid type water proofing compound on dry concrete surfaces including 15mm thick screed bed for in Cm 1:4 and mixed with liquid water proofing compound incl finishing the surfaces even and smooth without using extra cement (water proofing compound shall be measured and paid separately 200ml/50Kg of cement ) |
| 28 | Supply of liquid integral water proofing compound Make : Dr fixit LW(+) |
| 29 | M&L for water proofing treatment to RCC roof slab incl parapet comprising with the following course of treatment/specifications from bottom to top (a) Applying bituminous primer @100 gms per Sqm over plastered surfaces of roof incl parapet surfaces.(b) One layer of APP based polymeric membrane of approved manufacturer , 3mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less than 150 gram per Sqm.Polymeric membrane shall taken to a height 60cm(minimum) and then inserted insidethe groove of parapet wall and shall be done by torch on method or as per manufacture instructions (i) A minimum over lap of 100mm and 75mm should be made in the end and sides of the polymericmembrane respectively and sealed all overlap and joints as manufactures instructions.(ii) The make of polymeric membrane shall be SUPER THERMOLY OF STP Ltd or MOPLY FP OF Texsa India Ltd /IWL India Ltd (c) Applying two coat of bituminous aluminium paint on top of APP membrane. |
| 30 | S&F for Fe 410-W-Gde-E-250) Quality "A" framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering doors etcfor pressed steel frames for doors of size 125X60mm with one or more rebates including necessary fixing lugs, hinges lock strike plate etc.completeas specified and directed . |
| 31 | S & F anodised aluminium door air tight frame made of size 100mm x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleat etc for fixing anodised aluminium door shutter half pannelledwith half 5mm thick tinted glass shutter, rail made 80mm x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail)single leaf side hung type including necessary jointing cleat anodised aluminium fillet, aluminium glazing clip with rubber gas gasket with aluminium fitting such as aluminium but hinges 100mm long 3 Nos on each shutter , aluminium anodised handle 150mm, 2 Nos D type for each shutter and locking 6 Lever. one nos. hydrolic door closer . Make- Harrison one on each door .All door fitting except cleat shall be ISI marked . |
| 32 | Dismantling boarding, any description, fixed in any position with screw |
| 33 | S & F anodised aluminium partition, fixed type without sash bar , aluminium section with members of shutters of section 38 x 12mm and other standard weighing 0.55 Kg/Sqm inccluding 4mm thick aluminium composite panels and 5mm thick glass sheetfixed with necessary jointing cleats, glazing clips rubbers packing, anodised aluminium snap beading, screws etc including dismantling of existing partition wall complete all as spd |
| 34 | Taking down shutters of any description n exc 1.00 sq. m each and removing from site. |
| 35 | S&F anodised aluminium sliding typegauzedwindow,shutter with stainless steel wire cloth 0.36mm dia of wire and avg width of aperture 1.4mmfixed open tracksection 100x38mm having two track with members of window shutters of section 38x12mm run over fiber wheel rollers,in above itemetc all as specified and directed by Engineer-in Charge . incl all necessary fiber wheel rollers sutiable handle to facilitate sliding and all necessary jointing cleats ,rubber packing,Aluminium snap beeding etc all as specified and directed directed by Engineer-in Charge . |
| 36 | S&F anodised aluminium sliding type glazed window,shutter with 4mm thick plain sheet glass fixed open tracksection 100x38mm having two track with members of window shutters of section 38x12mm run over fiber wheel rollers,in above itemetc all as specified and directed by Engineer-in Charge . incl all necessary fiber wheel rollers sutiable handle to facilitate sliding and all necessary jionting cleats glazing clip,rubber packing,Aluminium snap beeding etc all as specified and directed directed by Engineer-in Charge . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
