Public Works Department-PWD has published Construction Of Plant Room By Way Of Prefabricated Shed Structure 21 X 60 Along With Allied Works For Housing Of Medical Oxygen Generation Plants, Vacuum Pumps Air Compressors At Sir Col. R.N Chopra Nursing Home, Gmch Jammu . Submission Date for this Tender is 15-11-2021. Building Work Tenders in gmch jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Nov-2021 | corrigendum | Other | 15-11-2021 |
| Sl. No. | Item Description |
| 1 | Earth-work excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 mtr including getting out excavated earth and disposal of surplus excavated earth 25 mtr from cutting edge, disposed earth to be leveled and neatly dressed. All kinds of soil. |
| 2 | Providing and Laying cement concrete of mix 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) including curing but excluding the cost of centering and shuttering. All work up to Plinth Level. |
| 3 | Providing and Laying in position reinforced cement concrete ofmix 1: 1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)including curing but excluding the cost ofcentering ,shuttering, finishing and reinforcement. All work upto Plinth Level. |
| 4 | Reinforced cement concrete work in walls (any thickness including attached pilasters, buttresses, plinth andstring coarses , fillets, columns, pillars, piers, avutments, posts and struts upto floor 5th level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 5 | Providing and Laying in position cement concrete of mix 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) including curing but excluding the cost of centering, shuttering with 20 percent split stone. All work upto Plinth Level. |
| 6 | Centring and Shuttering including strutting, propping etc and removal of farm work for foundations, footings, bases of columns. |
| 7 | Steel reinforcement for RCC work including straightening, cutting, bending placing in position and winding all complete cold twisted bars. |
| 8 | Centring and shuttering including strutting, propping etc and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Steel work in built of tubular (round, square or rectangular hollow tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying the priming coat of approved steel primer including welding and bolted with special shaped washers etc. Complete. |
| 10 | Providing and Fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugated as approved by Engineer in charge ) 0.50 mm(+0.05 percent) Total coated thickness with zinc coating 120 grams per sq mtr as per IS : 277 in 240 mpa steel grade 5-7 microns epoxy primeron both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard, film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr or as directed by Engineer Incharge. The sheet shall be fixed using self drilling, self tapping screws of size (5.5 X 55 mm ) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses including cutting to size ans shape wherever required. |
| 11 | Supply and Fixing rolling shutters of approved make, made of required size M.S Laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specifically designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 Part-1 and M.S. top cover of required thickness for rolling shutters. 80 X 1.20 mm M.S Lath with 1.25mm thick top cover. |
| 12 | Providing and Fixing of valve bearing for rolling shutters. |
| 13 | Extra for providing mechanical device chain crank operation for operating rolling shutters. |
| 14 | Providing and Fixing eaves boarding with pre-coated galvanized iron profile sheets. |
| 15 | Cement concrete Flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with floating coat of neat cement including cement slurry and curing complete but excluding the cost of noising of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 16 | Providing and Fixing strips in joints of Terrazo/ cement concrete floors glass strips 40 mm wide 4mm thick. |
| 17 | Providing and Laying cement concrete of mix 1: 2: 4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto Plinth Level. |
| 18 | Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (stone aggregate 20 mm nominal size) over 75 mm bed of dry brickballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 19 | 12 mm cement plaster of mix 1:4 ( 1 cement: 4 sand ) |
| 20 | Painting with synthetic enamel paint of approved band and manufacture to give an even shape (Two or more coats). |
| 21 | Providing and Fixing G.I chain link fencing of required width in mesh size 50 X 50 mm including strengthening with 2 mm dia wire or nuts and bolts and washers as required complete as per the direction of Engineer-in-charge, made of G.I wire of dia 4mm. |
| 22 | Filling available excavated earth (excluding rock) in trenches, Plinth, sides of foundations etc in layers not exceeding 20 cm in depth consolidation each deposited layers by ramming and watering lead upto 50 mtr and lift upto 1.5 mtr. |
| 23 | Provision for internal electrification of proposed shed by way of providing & laying of Havells / Polycab / Cromton / Anchor copper wires – 1.5 sqmm for internal wiring, 2.5 sqmm for circuit & 4 sqmm for power points – 3 nos. including cost towards MCBs, SPN / main switch, service line 10 sqmm aluminium, cost towards switches / sockets – 5 amp/15 amps, LED tubes 40 W – 12 nos, , heavy duty wall mounted fans400 mm- 04 nos., heavy duty exhaust fans 600 mm – 06 nos., LED flood lights 50 W – 02 nos. as per requirement at site / directions of Engineer-in-charge. |
| 24 | Carriage of stone aggregate upto 40 mm nominal size by mechanical transport average distance 20 km including loading, unloading and stacking complete. |
| 25 | Carriage of sand average distance 15 km by mechanical transport including loading, unloading and stacking complete. |
| 26 | Carriage of nallah stones average distance 10 km by mechanical transport including loading, unloading and stacking complete. |
| 27 | Carriage of Brick aggregate average distance 20 km by mechanical transport including loading unloading and stacking complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
