Bodoland Territorial Council has published Vertical Extension ( 1St And 2Nd Floor ) Of Office Building Of Dcs Office At Kajalgaon In Chirang District. ( Tn_30_1 ) . Submission Date for this Tender is 22-11-2021. Building Work Tenders in Kajalgaon, Chirang Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (A) First Floor Buildig: Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (i) From Primary Producer: TATA/SAIL/Esser Steel/Jindal Steel/Shyam Steel/RINL (ii) TMT Corrosion resistant steel (CRS) reinforcement bar. |
| 2 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (b) ISI approved Mild Steel reinforcement bar (M.S. Bar) |
| 3 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face. |
| 4 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. |
| 5 | Providing fromwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, painting, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain cocrete work in. 3.3.1.3 Flat surfaces such as soffits of suspended floors, roofs, landings and the like. |
| 6 | Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. (N) with out admixture, plasticiser (b) M20 grade concrete ro prop. 1:1.5:3 |
| 7 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately) A) 112 mm thick brick wall (a). In cement mortar in proportion 1:4.(1 cement:4 sand) |
| 8 | 15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4 (1 cement : 4 sand) |
| 9 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering upto 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On rough side (backing coat 15mm and finishing coat 5mm thick) b) In cement mortar 1:4 (1 cement: 4 sand) |
| 10 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (iii) Size 165mm x 60mm (Double rebate) |
| 11 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (iv) 5 mm clear glass |
| 12 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (iv) 5 mm coloured glass |
| 13 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (b)Fixed windows and ventilators (iv) 5 mm clear glass |
| 14 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (b)Fixed windows and ventilators (iv) 1.3 mm coloured glass |
| 15 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ opening with M.S. flatsat required spacingin frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I .Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. |
| 16 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) 1.5 mm |
| 17 | (m) Distempering two coats with oil bond distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from morter droppimgs and other foreign matter and including preparing surface even and sand papered somooth. (i) Priming coat with distemper primer. |
| 18 | (m) Distempering two coats with oil bond distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from morter droppimgs and other foreign matter and including preparing surface even and sand papered somooth. (i) Top coat. |
| 19 | Extra over otem no (m) (n) and (o) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture. |
| 20 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (b) Plastic Emulsion Paint of approved brand and manufacture (Asian paont/Berger paint/ICI paint/J&N paint/Nerolac) |
| 21 | (c) Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 22 | Extra over item no. 13.4.7 above for every subsequent coat of wall painting with plastic emulsion paint of approved brand and insfrastrure (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac). Plastic Emulsion Paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) |
| 23 | Finishing old/new wall with water proofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 24 | Applying priming coat over new wood based surfaces up to 100mm in grith/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (a) With ready mixed paint, wood primer (white). |
| 25 | Applying priming coat over new wood and wood based surfaces up to 100mm in girth/width after and including preparing the surface bythoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (a) With ready mixed paint, Wood primer (white) |
| 26 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 27 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces upto 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 28 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). a) Sliding door bolts (i) 250mm x 16mm |
| 29 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). c) Door Handles (ii) 150mm |
| 30 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). a) Hydraulic door closure |
| 31 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). m) Mortic lock vertical type iii) 100mm (Godrej with handle 4 lever) |
| 32 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). (t) Door stopper with rubber stopper |
| 33 | Supplying, fitting and fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (g) MS butt hinge ii) Heavy Type (iii) 150mm x 60mm x 3.15mm |
| 34 | Supplying, fitting and fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (i) MS double acting spring hinge 125mm |
| 35 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measuredand paid separately ) B) With Teak wood/Sissu wood (ii) 35 mm thick. |
| 36 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. (b) Non decorative type and block board core. (ii) 35 mm thick |
| 37 | Providing, fitting and fixing anodised aluminuim framed glazed doors with partition walls party glass and party prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm section of approved brand with door style of size 81mm x 43mm x 2mm, top rails 40mm x 43mm x 2mm lock rails 81mm x 43mm x 2mm fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring, pivot aluminium door handle, lock, angles, cleat etc. complete as directed by the department at all levels. (iv) 15mm thick glass panes and 12mm prelaminated board. |
| 38 | Providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not less than 18mm on floors, skirtings, risers and traeds of steps over 15mm thick base of cement mortar in prop 1:3 (1 cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement slurry mixed with approved pigment to match shade of tiles, mized with approved pigment to match the shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in confor mity with colour of tiles and as approved and directed by the department.) (a) Executive Range Somany/Orient/Nitco/Varmora/VITA/Marbito/Make. (ii) Size=800mmx800mm and above. |
| 39 | Providing slab flooring of 18mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (i) 550mm x 550mm |
| 40 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement slurry mixed withapproved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department) (Walls means both interior and exterior walls). Delux range-Somany/Orient/Nitco/Varmora Make Of size 300mm x 600mm and above |
| 41 | Sanitary Installation and Water Supply Works: Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) |
| 42 | Supplying fiting and fixing PVC flushing cistern with all internal fitting with CI brackets including fitting and fixing standard size CP flush pipe union clamps etc. complete as directed and specified ( pipes will be measured separately) I) parryware make a) White (i)Economy Single Flush (Cat No.C8090/C8055) |
| 43 | Providingfitting and fixing vitreous china flat back type lippedfront urinal basinwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required. (A) Parryware Make (a) White (ii) Aquaseal (Cat. No.C0508) |
| 44 | Basin (without pedestal) (A) Parryware Make (a) White (i) Star Basin 550 x 400 (Cat. No.C0450) |
| 45 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 46 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (A) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935) |
| 47 | Providing, fitting and fixing CP towel rail complete as directed and specified. (c) Parryware make (Cat.No.C9948) |
| 48 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm |
| 49 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches d) 25 mm dia |
| 50 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches e) 20 mm dia ii) Using other ISI marked approved brand |
| 51 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches f) 15 mm dia ii) Using other ISI marked approved brand |
| 52 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body |
| 53 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (i)15mm dia |
| 54 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (ii) 20mm dia |
| 55 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (iii)25mm dia |
| 56 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii) Jaguar make (a) Continental |
| 57 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock ofapproved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Agmeco brand a) Flush cock Economy Cat No.00506 |
| 58 | Supplying, fitting and fixing Chrome Plated (C.P.)wall mixercomplete as directed. (ii) Agmeco brand a)Wall mixer non telephonic Cat No.00211 |
| 59 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) UPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) vii) 65mm diameter |
| 60 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) UPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) x) 110mm diameter |
| 61 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (I) 2000 Lt capacity (a)Sintex make |
| 62 | (B) Second Floor Buildig: Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (i) From Primary Producer: TATA/SAIL/Esser Steel/Jindal Steel/Shyam Steel/RINL (ii) TMT Corrosion resistant steel (CRS) reinforcement bar. |
| 63 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (b) ISI approved Mild Steel reinforcement bar (M.S. Bar) |
| 64 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face. |
| 65 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. |
| 66 | Providing fromwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, painting, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain cocrete work in. 3.3.1.3 Flat surfaces such as soffits of suspended floors, roofs, landings and the like. |
| 67 | Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. (N) with out admixture, plasticiser (b) M20 grade concrete ro prop. 1:1.5:3 |
| 68 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately) A) 112 mm thick brick wall (a). In cement mortar in proportion 1:4.(1 cement:4 sand) |
| 69 | 15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4 (1 cement : 4 sand) |
| 70 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering upto 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On rough side (backing coat 15mm and finishing coat 5mm thick) b) In cement mortar 1:4 (1 cement: 4 sand) |
| 71 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.60mm thick sheet (iii) Size 165mm x 60mm (Double rebate) |
| 72 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (iv) 5 mm clear glass |
| 73 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (iv) 5 mm coloured glass |
| 74 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (b)Fixed windows and ventilators (iv) 5 mm clear glass |
| 75 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (b)Fixed windows and ventilators (iv) 1.3 mm coloured glass |
| 76 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ opening with M.S. flatsat required spacingin frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I .Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. |
| 77 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) 1.5 mm |
| 78 | (m) Distempering two coats with oil bond distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from morter droppimgs and other foreign matter and including preparing surface even and sand papered somooth. (i) Priming coat with distemper primer. |
| 79 | (m) Distempering two coats with oil bond distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from morter droppimgs and other foreign matter and including preparing surface even and sand papered somooth. (i) Top coat. |
| 80 | Extra over otem no (m) (n) and (o) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture. |
| 81 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (b) Plastic Emulsion Paint of approved brand and manufacture (Asian paont/Berger paint/ICI paint/J&N paint/Nerolac) |
| 82 | (c) Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 83 | Extra over item no. 13.4.7 above for every subsequent coat of wall painting with plastic emulsion paint of approved brand and insfrastrure (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac). Plastic Emulsion Paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) |
| 84 | Finishing old/new wall with water proofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 85 | Applying priming coat over new wood based surfaces up to 100mm in grith/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (a) With ready mixed paint, wood primer (white). |
| 86 | Applying priming coat over new wood and wood based surfaces up to 100mm in girth/width after and including preparing the surface bythoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (a) With ready mixed paint, Wood primer (white) |
| 87 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 88 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces upto 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 89 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). a) Sliding door bolts (i) 250mm x 16mm |
| 90 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). c) Door Handles (ii) 150mm |
| 91 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). a) Hydraulic door closure |
| 92 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). m) Mortic lock vertical type iii) 100mm (Godrej with handle 4 lever) |
| 93 | Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright nature matt & satin finished). (t) Door stopper with rubber stopper |
| 94 | Supplying, fitting and fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (g) MS butt hinge ii) Heavy Type (iii) 150mm x 60mm x 3.15mm |
| 95 | Supplying, fitting and fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (i) MS double acting spring hinge 125mm |
| 96 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measuredand paid separately ) B) With Teak wood/Sissu wood (ii) 35 mm thick. |
| 97 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. (b) Non decorative type and block board core. (ii) 35 mm thick |
| 98 | Providing, fitting and fixing anodised aluminuim framed glazed doors with partition walls party glass and party prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm section of approved brand with door style of size 81mm x 43mm x 2mm, top rails 40mm x 43mm x 2mm lock rails 81mm x 43mm x 2mm fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring, pivot aluminium door handle, lock, angles, cleat etc. complete as directed by the department at all levels. (iv) 15mm thick glass panes and 12mm prelaminated board. |
| 99 | Providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not less than 18mm on floors, skirtings, risers and traeds of steps over 15mm thick base of cement mortar in prop 1:3 (1 cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement slurry mixed with approved pigment to match shade of tiles, mized with approved pigment to match the shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in confor mity with colour of tiles and as approved and directed by the department.) (a) Executive Range Somany/Orient/Nitco/Varmora/VITA/Marbito/Make. (ii) Size=800mmx800mm and above. |
| 100 | Providing slab flooring of 18mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (i) 550mm x 550mm |
| 101 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement slurry mixed withapproved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department) (Walls means both interior and exterior walls). Delux range-Somany/Orient/Nitco/Varmora Make Of size 300mm x 600mm and above |
| 102 | Sanitary Installation and Water Supply Works: Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) |
| 103 | Supplying fiting and fixing PVC flushing cistern with all internal fitting with CI brackets including fitting and fixing standard size CP flush pipe union clamps etc. complete as directed and specified ( pipes will be measured separately) I) parryware make a) White (i)Economy Single Flush (Cat No.C8090/C8055) |
| 104 | Providingfitting and fixing vitreous china flat back type lippedfront urinal basinwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required. (A) Parryware Make (a) White (ii) Aquaseal (Cat. No.C0508) |
| 105 | Basin (without pedestal) (A) Parryware Make (a) White (i) Star Basin 550 x 400 (Cat. No.C0450) |
| 106 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 107 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (A) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935) |
| 108 | Providing, fitting and fixing CP towel rail complete as directed and specified. (c) Parryware make (Cat.No.C9948) |
| 109 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm |
| 110 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches d) 25 mm dia |
| 111 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches e) 20 mm dia ii) Using other ISI marked approved brand |
| 112 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches f) 15 mm dia ii) Using other ISI marked approved brand |
| 113 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body |
| 114 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (i)15mm dia |
| 115 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (ii) 20mm dia |
| 116 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (iii)25mm dia |
| 117 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii) Jaguar make (a) Continental |
| 118 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock ofapproved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Agmeco brand a) Flush cock Economy Cat No.00506 |
| 119 | Supplying, fitting and fixing Chrome Plated (C.P.)wall mixercomplete as directed. (ii) Agmeco brand a)Wall mixer non telephonic Cat No.00211 |
| 120 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) UPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) vii) 65mm diameter |
| 121 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) UPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) x) 110mm diameter |
| 122 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (I) 2000 Lt capacity (a)Sintex make |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
