Supply, Installation, Demonstration And Maintenance Of Hydroponics System ( 1200 Sq.Ft. Vertical Nft ) - 1 High strength metal A-frames for NFT channels: 10X2.5 NFT-units, Total grow area= 1200 s.ft. – 48 Unitsa) 1’’MS square tubes,1/2” MS round tub, Dharampur-West Bengal

Supply, Installation, Demonstration And Maintenance Of Hydroponics System ( 1200 Sq.Ft. Vertical Nft ) - 1 High strength metal A-frames for NFT channels: 10X2.5 NFT-units, Total grow area= 1200 s.ft. – 48 Unitsa) 1’’MS square tubes,1/2” MS round tubes,T-sections – 2950 ft.b) Tooling pieces (cutter discs, bits etc) & weld sticks – Lump sumc) Red oxide metal primer and high-gloss enamel paint – 52 ltrs. 2 NFT hydroponic PVC grow channels for 2” pots: 10 long, 4” diameter PVC pipes with 15/20 grow- sites each, NFT end-caps, grommets, supply piping, takeoffs,taps,through hulls, drain piping and fittings – 264 Units 3 Grow-bed accessories: Lump suma) Grow media (vermiculite, perlite, hydroton, hydroponic sponges, rock-wool etc), grow pots: 2” netted pots and planting supports.b) Grow bed characters: 5 nos. (total 75 ft) portable three layer hydroponics grow bed in three separate section with net pot and one on-ground soil bed (control/check plot). 4 Hydroponic Filters: Radial Filter and Bio-Filter: Radial filter with combined gravel filter for removal of bulk solid, bio-filter with enriched O2 aeration & high surface area bio-media and output line strainer - 1 Unit 5 Aerated sump and reserviour system, with 55 W UV sterilizer and water parameter control system with integrated sensor probe and injector panels - 1 Unit 6 3kW Automatic recirculating water heating unit: 220V tankless water heater with temperature control - 1 Unit 7 Pumping setup: 1 HP Hi-Flow Pumps X 2, ½ HP regenerative pumps X 2, valves, fittings, venturi jet injectors, PVC manifolds, level switches and wiring - 4 Units 8 Oxygen concentrator for advanced Bio-filtration: PSA based oxygen concentrator, working pressure 35 PSI, flow rate ~ 30 lpm, 82 % O2 concentration - 1 Unit 9 Electrical & lighting system: Conduits, wires, fuses, MCBs, junction boxes, relays, voltmeters, switches. SW. boards, LED grow-light system, SMPS, cables, nuts, bolts & fasteners, panels and needed accessories - 1 Unit 10 Automation & control systems : Central controller system, PCB boards, IoT modules, sensors (temp, ORP, TDS, TSS, pH, O2, level etc.), actuators (servos, solenoids, relays), MCU, IP enclosures, connectors, wires, interfaces and meters, microprocessors, relay & keypads, BT, Wifi & connect modules, TFTGUI - 1 Unit 11 Integrated filter/condition & storage unit: Three stage filter with pressurized inline water filter, iron filter & softener unit with backwash, 500L loft tank - 1 Unit 12 Build Costs: Labor, Fabrication and Transports- Labor, supervision, fabrication and tooling charges, local and intercity transport and miscellaneous costs -Lump sum 13 SAAS (Software-as-a-service) based fullstack Farm Monitoring Application (FMA) with data monitoring modules, data collection modules and OLAP/OLTP database powered farm data fetching capability. 14 Wages of one worker at hi-tech polyhouse (15 days/month x 36 months) 15 AMC: charges of maintenance and support service (36 months)

Refer document

INR 9000.0 /-

Refer document

Name of Work: Supply, installation, demonstration and maintenance of Hydroponics System (1200 Sq.Ft. Vertical NFT)

Sl. No.	Item Description
1	High strength metal A-frames for NFT channels: 10"X2.5" NFT-units, Total grow area= 1200 s.ft. – 48 Units a) 1’’MS square tubes,1/2” MS round tubes,T-sections – 2950 ft. b) Tooling pieces (cutter discs, bits etc) & weld sticks – Lump sum c) Red oxide metal primer and high-gloss enamel paint – 52 ltrs.
2	NFT hydroponic PVC grow channels for 2” pots: 10" long, 4” diameter PVC pipes with 15/20 grow- sites each, NFT end-caps, grommets, supply piping, takeoffs,taps,through hulls, drain piping and fittings – 264 Units
3	Grow-bed accessories: Lump sum a) Grow media (vermiculite, perlite, hydroton, hydroponic sponges, rock-wool etc), grow pots: 2” netted pots and planting supports. b) Grow bed characters: 5 nos. (total 75 ft) portable three layer hydroponics grow bed in three separate section with net pot and one on-ground soil bed (control/check plot).
4	Hydroponic Filters: Radial Filter and Bio-Filter: Radial filter with combined gravel filter for removal of bulk solid, bio-filter with enriched O2 aeration & high surface area bio-media and output line strainer - 1 Unit
5	Aerated sump and reserviour system, with 55 W UV sterilizer and water parameter control system with integrated sensor probe and injector panels - 1 Unit
6	3kW Automatic recirculating water heating unit: 220V tankless water heater with temperature control - 1 Unit
7	Pumping setup: 1 HP Hi-Flow Pumps X 2, ½ HP regenerative pumps X 2, valves, fittings, venturi jet injectors, PVC manifolds, level switches and wiring - 4 Units
8	Oxygen concentrator for advanced Bio-filtration: PSA based oxygen concentrator, working pressure 35 PSI, flow rate ~ 30 lpm, 82 % O2 concentration - 1 Unit
9	Electrical & lighting system: Conduits, wires, fuses, MCB"s, junction boxes, relays, voltmeters, switches. SW. boards, LED grow-light system, SMPS, cables, nuts, bolts & fasteners, panels and needed accessories - 1 Unit
10	Automation & control systems : Central controller system, PCB boards, IoT modules, sensors (temp, ORP, TDS, TSS, pH, O2, level etc.), actuators (servos, solenoids, relays), MCU, IP enclosures, connectors, wires, interfaces and meters, microprocessors, relay & keypads, BT, Wifi & connect modules, TFTGUI - 1 Unit
11	Integrated filter/condition & storage unit: Three stage filter with pressurized inline water filter, iron filter & softener unit with backwash, 500L loft tank - 1 Unit
12	Build Costs: Labor, Fabrication and Transports- Labor, supervision, fabrication and tooling charges, local and intercity transport and miscellaneous costs -Lump sum
13	SAAS (Software-as-a-service) based fullstack Farm Monitoring Application (FMA) with data monitoring modules, data collection modules and OLAP/OLTP database powered farm data fetching capability.
14	Wages of one worker at hi-tech polyhouse (15 days/month x 36 months)
15	AMC: charges of maintenance and support service (36 months)