Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-01-2022 | CORRIGENDUM_DATE_V | Date | 27-01-2022 |
| 2 | 07-01-2022 | Tender Document Amended | Other | 13-01-2022 |
| 3 | 28-12-2021 | CORRIGENDUM_DATE_IV | Date | 13-01-2022 |
| 4 | 14-12-2021 | CORRIGENDUM_DATE_III | Date | 29-12-2021 |
| 5 | 29-11-2021 | CORRIGENDUM_DATE_II | Date | 14-12-2021 |
| 6 | 17-11-2021 | Queries | Other | 29-11-2021 |
| 7 | 17-11-2021 | Drawing-14 | Other | 29-11-2021 |
| 8 | 17-11-2021 | Drawing-13 | Other | 29-11-2021 |
| 9 | 17-11-2021 | Drawing-12 | Other | 29-11-2021 |
| 10 | 17-11-2021 | Drawing-11 | Other | 29-11-2021 |
| 11 | 17-11-2021 | Drawing-10 | Other | 29-11-2021 |
| 12 | 17-11-2021 | Drawing-9 | Other | 29-11-2021 |
| 13 | 17-11-2021 | Drawing-8 | Other | 29-11-2021 |
| 14 | 17-11-2021 | Drawing-7 | Other | 29-11-2021 |
| 15 | 17-11-2021 | Drawing-6 | Other | 29-11-2021 |
| 16 | 17-11-2021 | Drawing-5 | Other | 29-11-2021 |
| 17 | 17-11-2021 | Drawing-4 | Other | 29-11-2021 |
| 18 | 17-11-2021 | Drawing-3 | Other | 29-11-2021 |
| 19 | 17-11-2021 | Drawing-2 | Other | 29-11-2021 |
| 20 | 17-11-2021 | Drawing-1 | Other | 29-11-2021 |
| 21 | 17-11-2021 | CORRIGENDUM_DATE | Date | 29-11-2021 |
| 22 | 02-11-2021 | CORRIGENDUM | Date | 22-11-2021 |
| Sl. No. | Item Description |
| 1 | CIVIL (HSR PART) |
| 2 | Loading, Unloading, and Carriage of Materials,By Mechanical Transport including loading, unloading and stacking (HSR 3.1) (Derived rate) (HSR 3.1.2 - HO001) |
| 3 | 3.1.2) EARTH Upto 10 kms |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.(HSR 4.4) |
| 5 | 4.4.1) All kinds of soil |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.(HSR 4.12) |
| 7 | 4.12.1) All Kinds of soil |
| 8 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials (HSR 4.31) |
| 9 | 4.31.1) All kinds of soil |
| 10 | 1.5 mt to 3 mt depth |
| 11 | 3 mt to 4.5 mt depth |
| 12 | 4.5 mt to 6.0mt depth |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (HSR 4.32) |
| 14 | Supplying chemical emulsion in sealed containers including delivery as specified. (HSR 4.38) |
| 15 | 4.38.1) Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 16 | Providing and injection chemical emulsion for PRE-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, alongwith the external perimetre of building, expansion joints surrounding of pipes and conduiteetc,complete(plinthareaofthebuildingat ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (HSR 4.39) |
| 17 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (HSR 4.40) |
| 18 | 4.40.2) Along the external wall below concrete or masonry apron using chemical emulsion @ 4.32 litres per linear metre including drilling and plugging holes etc.: |
| 19 | 4.40.2.1) With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge (HSR 5.7) |
| 21 | 5.7.4) in cement mortar |
| 22 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer(HSR 5.25) |
| 23 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (HSR 5.70) |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. (HSR 6.1) |
| 25 | 6.1.6) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 26 | 6.1.7) 1:5:10 (1 Cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) |
| 27 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. (HSR 6.3) |
| 28 | 6.3.1) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 29 | Providing and laying damp-proof course with cement concrete 1:1.5:3 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20mm nominal size) (HSR 6.9) |
| 30 | 6.9.1) 50 mm thick |
| 31 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (HSR 6.13) |
| 32 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (HSR 6.25)(Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). |
| 33 | 6.25.1) All work upto plinth level |
| 34 | 6.25.2) All work from plinth level upto floor IV level. |
| 35 | Extra for providing richer mixes at all floor levels. (HSR 6.26)(Note :- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). |
| 36 | 6.26.2) Providing M-35 grade concrete instead of M-25 grade BMC/ RMC. (Note : Cement content considered in M-35 is @ 350 kg/cum) |
| 37 | Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof. (HSR 6.27) |
| 38 | for 5 to 7th floor |
| 39 | for 8 to 10th floor |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : (HSR 6.30) |
| 41 | 6.30.1) Foundations, footings, bases of columns etc. for mass concrete |
| 42 | 6.30.2) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 43 | 6.30.3) Suspended floors, roofs, landings, balconies and access platform. |
| 44 | 6.30.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 45 | 6.30.6) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 46 | 6.30.7) Stairs, (excluding landings) except spiral - staircases. |
| 47 | 6.30.15) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like |
| 48 | 6.30.16) Edges of slabs and breaks in floors and walls |
| 49 | 6.30.16.1)under 20 cm wide |
| 50 | 6.30.19) Weather shade, Chajjas, corbels etc., including edges |
| 51 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 6.33) |
| 52 | 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 53 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 6.34) |
| 54 | 6.34.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 55 | Providing and filling in position bitumen mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints (HSR 6.57) |
| 56 | Providing and fixing sheet covering over expansion joints with iron screws as per design. (HSR 6.59) Aluminium fluted strips 3.15 mm thick. 200 mm wide (HSR 6.59.2) |
| 57 | Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminium base members, self aligning/ self centering arrangement and support plates etc. as per ASTM 9221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it\"s components. System shall consist of metal profiles with a universal aluminium base member designed to ccommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer\"s pre-engineered self centering arrangement that freely rotates I moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063).(HSR 6.61) 6.61.1) Floor Joint of 100 mm gap |
| 58 | Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminium base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to comer application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). (HSR 6.62)Wall Joint of 100 mm gap (6.62.1) |
| 59 | Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminium base members with, self aligning and self centering arrangement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer\"s pre engineered self-centering arrangement that freely rotates Imoves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).(HSR 6.63)Roof Joint of 100 mm gap (6.63.1) |
| 60 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in: (Derived Rate) (HSR 7.21) + (7.40 - 7.39) |
| 61 | 7.21.2) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 62 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in (Derived Rate) (HSR 7.22) + (7.40 - 7.39) |
| 63 | 7.22.2) Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 64 | Extra height for 5th to 7th floor |
| 65 | Half brick masonry with common burnt clay non-modular bricksof class designation 12.50 in superstructure above plinth level up tofloor IV level (HSR 7.28) |
| 66 | 7.28.2) Cement mortar 1 :4 ( 1 cement :4 coarse sand |
| 67 | Extra for half brick masonry in superstructure, above floor IV level for every three floors or part thereof by mechanical means. For 4 to 6th floor(HSR 7.29) |
| 68 | for 7 to 8th floor |
| 69 | Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks) (HSR 7.30) |
| 70 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor IV level (HSR 7.31) |
| 71 | 7.31.2) Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 72 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor IV level in : (HSR 7.47) |
| 73 | 7.47.2) Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 74 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor IV level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work (HSR 7.50) |
| 75 | Extrafor4 to 6th floor |
| 76 | Extra for 7 to 8th floor |
| 77 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). (HSR 7.51) |
| 78 | Dressed or moulded two brick cornice laid in cement sand mortar 1 :4 including 12 mm thick cement plaster 1 :4 or pointing, as required. (HSR 7.57) |
| 79 | Providing and fixing dry cladding up to 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size up to 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) (HSR 8.1) |
| 80 | 8.1.1) Red sand stone / Gwalior Stone/ Dholpur Stone - 30mm thick gang saw cut stoneor any shade approved by E.I.C. |
| 81 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1 :2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).(HSR 8.2) |
| 82 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge (HSR 8.3) |
| 83 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1 :3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1 :2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by meansof cramps, which shall be paid for separately). (HSR 8.4) |
| 84 | 8.4.1) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble |
| 85 | 8.4.1.2) Area of slab over 0.50 sqm |
| 86 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete (HSR 8.5) |
| 87 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (HSR 8.26) |
| 88 | 8.26.2) Granite of any colour and shade |
| 89 | 8.26.2.2) Area of slab over 0.50 Sqm |
| 90 | Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of (HSR 8.14) |
| 91 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (HSR 8.27) |
| 92 | 8.27.2) Granite work |
| 93 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (HSR 8.28) |
| 94 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete (HSR 8.29) |
| 95 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1 :2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. (HSR 8.30) |
| 96 | 8.30.2) Granite Stone of approved shade |
| 97 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(HSR 8.32) |
| 98 | (a) Structural analysis & design and preparation of shop drawings forpressure equalisation or rain screen principle as required, proper drainage ofwater to make it watertight including checking of all the structural andfunctional design. |
| 99 | (b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metallic colour of approved shadesmade out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheetshall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rodsetc. |
| 100 | (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for thepurpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places. |
| 101 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (HSR 9.17) |
| 102 | 9.17.1) In 75x75 mm deep chase |
| 103 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. (HSR 9.18) |
| 104 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns. Sheet should have protective guard film of25 microns minimum to avoid scratches during transportation and should besupplied in single length up to 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required. (HSR 9.33) |
| 105 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with (HSR 9.46) |
| 106 | 9.46.3) 12.5 mm thick tapered edge gypsum moisture resistant board |
| 107 | Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing \"C\" wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1 .6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with:(HSR 9.49) |
| 108 | 9.49.1) GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after |
| 109 | 9.49.2) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation |
| 110 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to fonn grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (HSR 9.50) |
| 111 | 9.50.1) 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rock wool of 48 kg /cum backing. |
| 112 | Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling (HSR 10.1) |
| 113 | 10.1.1) Re-compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete. |
| 114 | Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to be laid below the topping. (HSR 10.4) |
| 115 | Providing and laying Cement concrete flooring 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete (HSR 10.10) |
| 116 | 10.10.1) 40 mm thick with 20 mm nominal size stone aggregate |
| 117 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 Kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete (HSR 10.12) |
| 118 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (HSR 10.13)10.13.1) 18 mm thick |
| 119 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand) (HSR 10.30) |
| 120 | 10.30.1) Light shade pigment using white cement |
| 121 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : (HSR 10.49) |
| 122 | 10.49.1) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 123 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (HSR 10.37) |
| 124 | 10.37.1) 25 mm thick |
| 125 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (HSR 10.38) |
| 126 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (HSR 10.44) |
| 127 | 10.44.1) Makrana white second quality |
| 128 | 10.44.2) Rajnagar Plain marble |
| 129 | Providing and laying Baroda Green marble stone 17mm and above thick inrisers of step, skirting , dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge (HSR 10.47) |
| 130 | Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge (HSR 10.48) |
| 131 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge (HSR 10.50) |
| 132 | 10.50.1) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 133 | Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.(HSR 10.51) |
| 134 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (HSR 10.60) |
| 135 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mmor more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (HSR 10.61) |
| 136 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.62) |
| 137 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick (HSR 10.69)Note: Double charge tiles will be used. Nothing will be paid |
| 138 | 10.69.2) Size of Tile 600x600 mm |
| 139 | 10.69.3) Size of Tile 800x800 mm |
| 140 | Extra for grouting the joints of floor tiles having joints of 4 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge (Derived Rate) (HSR 10.70) |
| 141 | 10.70.2) Size of Tile600x600mm |
| 142 | 10.70.3) Size of Tile 800 x 800 mm |
| 143 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) (HSR 10.71)Note: Double charge tiles will be used. Nothing will be paid |
| 144 | 10.71.2) Size of Tile 600x600 mm |
| 145 | 10.71.3) Size of Tile 800x800 mm |
| 146 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (HSR 10.107) |
| 147 | 6 mm cement plaster to ceiling of mix : (HSR 11.1) |
| 148 | 11.1.1) 1:3 (1 Cement : 3 fine sand) |
| 149 | 12 mm cement plaster of mix : (HSR 11.5) |
| 150 | 11.5.3) 1:4 (1 Cement : 4 fine sand) |
| 151 | 15 mm cement plaster on the rough side of single or half brick wall of mix : (HSR 11.6) |
| 152 | 11.6.1) 1:4 (1 Cement : 4 fine sand) |
| 153 | 20 mm cement plaster of mix (HSR 11.7) |
| 154 | 11.7.1) 1 :4 (1 cement: 4 fine sand) |
| 155 | 10 mm plaster on cement concrete or reinforced cement concrete work withwhite cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. (HSR 11.15) DERIVED |
| 156 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof (HSR 11.35) |
| 157 | 4th floor |
| 158 | 5th floor |
| 159 | 6th floor |
| 160 | 7th floor |
| 161 | 8th floor |
| 162 | Terrace |
| 163 | Providing and applying 12 mm thick (average) premixed formulated one coatgypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per1ite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete (HSR 11.46) |
| 164 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections (HSR 11.54) |
| 165 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58) |
| 166 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (HSR 11.59) |
| 167 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (HSR 11.60) |
| 168 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : (HSR 11.64) |
| 169 | 11.64.1) New work (two or more coats) over and including water tinnable priming coat with cement primer |
| 170 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:(HSR 11.67) |
| 171 | 11.67.1) Water thinnable cement primer |
| 172 | Applying priming coat: (HSR 11.68) |
| 173 | 11.68.1) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 174 | 11.68.3) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 175 | Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint(HSR 11.70)Technical Specifications: i) Degree of whiteness (in terms of reflectance) >93%ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0iii) Bulk Density - 0.8 to 0.9 kg/litreiv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cPv) Pot Life - Min. 1 BO minutesvi) Coverage after 1 st coat - 80-1 00 sqft/kgvii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B |
| 176 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : (HSR 11.71) |
| 177 | 11.71.2) Two or more coats on new work |
| 178 | Wall painting with acrylic emulsion paint, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour (HSR 11.74) |
| 179 | 11.74.2) Two coats |
| 180 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (HSR 11.75) |
| 181 | 11.75.2) Two coats |
| 182 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.(HSR 11.76) |
| 183 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.(HSR 11.77) |
| 184 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 11.78) |
| 185 | Painting the wooden I metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade(HSR 11.82) |
| 186 | 11.82.1) Two or more coats on new work |
| 187 | Melamine polishing on wood work (one or more coat).: (HSR 11.91) |
| 188 | Finishing walls with textured exterior paint of required shade : (HSR 11.94) |
| 189 | 11.94.1) New work (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20Kg/ 10 Sqm |
| 190 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (HSR 11.97) |
| 191 | 11.97.2) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @0.75 ltr/10 Sqm of approved brand and manufacture |
| 192 | 11.97.3) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @ 0.80 ltr/10 Sqm of approved brand and manufacture |
| 193 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (HSR 12.1) |
| 194 | 12.1.1) Second class Teak wood |
| 195 | 12.1.3) Kiln seasoned and chemically treated Hollock wood |
| 196 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (HSR 12.6) |
| 197 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick: (HSR 12.9) |
| 198 | 12.9.8) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Sqm wire and 1.4mm wide aperture with matching wood beading |
| 199 | Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality (HSR 12.12) |
| 200 | 12.12.2) 1.0 mm thick |
| 201 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge (HSR 12.29) |
| 202 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (HSR 12.36) |
| 203 | 12.36.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 204 | 12.36.3) 25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. Piano hinges IS 3818 marked with necessary screw |
| 205 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37) |
| 206 | 12.37.2) 30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws |
| 207 | 12.37.3) 25 mm thick (for cupboard) including ISi marked nickel plated sqm bright finished M.S. piano hinges with necessary screws |
| 208 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (HSR 12.39) |
| 209 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):(HSR 12.40) |
| 210 | 12.40.1) Rectangular or square |
| 211 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (HSR 12.78) |
| 212 | 12.78.1) 250x10 mm |
| 213 | 12.78.3) 150x10 mm |
| 214 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (HSR 12.80) |
| 215 | Providing and fixing bright finished brass handles with screws etc. complete (HSR 12.85) |
| 216 | 12.85.1) 125 mm |
| 217 | 12.85.3) 75 mm |
| 218 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (HSR 12.86) |
| 219 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 Kg to 80 Kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (HSR 12.89) |
| 220 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (Powder coated)(HSR 12.98)Note:- Nothing will be paid extra for powder coating |
| 221 | 12.98.1) 300x16 mm |
| 222 | 12.98.2) 250x16 mm |
| 223 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (Powder coated)Note:- Nothing will be paid extra for powder coating (HSR 12.99) |
| 224 | 12.99.1) 300x10 mm |
| 225 | 12.99.3) 200x10 mm |
| 226 | 12.99.5) 100x10 mm |
| 227 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (Powder coated)Note:- Nothing will be paid extra for powder coating(HSR 12.102) |
| 228 | 12.102.1) 125 mm |
| 229 | 12.102.2) 100 mm |
| 230 | 12.102.3) 75 mm |
| 231 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Powder coated)Note:- Nothing will be paid extra for powder coating(HSR 12.103) |
| 232 | 12.103.2) Twin rubber stopper |
| 233 | Providing and fixing aluminium casement stays, ISi marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete (Powder coated)Note:- Nothing will be paid extra for powder coating (HSR 12.104) |
| 234 | 12.104.1) Anodized (AC-10) Aluminium |
| 235 | 12.104.3) Powder coated minimum thickness 50 micron aluminium |
| 236 | Providing and fixing of roller blinds on windows complete with material and sqm labour complete with push up & down arrangement as per approved design / colour and Engineer-in-charge. (HSR 12.114) |
| 237 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) (HSR 12.131)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 238 | 12.131.1) Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 239 | 12.131.5) Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). |
| 240 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 :t 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of ppropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished all, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all comers, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made (HSR 12.132)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 241 | 12.132.1) Fixed window/ ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 :t 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm) |
| 242 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). (HSR 12.133)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 243 | 12.133.2) Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) |
| 244 | Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge (HSR 12.137) |
| 245 | 12.137.3) 300 x 19 x 1.9 mm |
| 246 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. (HSR 12.138) |
| 247 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.(HSR 12.150) |
| 248 | Providing and fixing fire resistant door frame of section 50 x 60 mm onhorizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m2) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/ms . The frame will havea provision of G.I. Anchor fasteners 14 Nos. ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micronindesired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).(HSR 12.151) |
| 249 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m2) duly filled mineral wool insulation having density min 96 kg/m3 and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for separately).(HSR 12.152) |
| 250 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 grn/m2) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (El20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & El. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with 1$0/IEC 17011 and accredits labs as per ISOnEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm(HSR 12.154) |
| 251 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :(HSR 12.157) |
| 252 | 12.157.1) For fixed portion |
| 253 | 12.157.1.2) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 254 | 12.157.2) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 255 | 12.157.2.2) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 256 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item (HSR 12.159) |
| 257 | 12.159.2) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm |
| 258 | Providing and fixing aluminium round shape handle of outer dia 100 mm withSS screws etc. complete as per direction of Engineer-in-charge (HSR 12.167) |
| 259 | 12.167.1) Anodized (AC 15 ) aluminium |
| 260 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. (Only weight of grill to be measured for payment). (HSR 12.170) |
| 261 | Providing and fixing 12 mm thick frameless toughened glass door shutter ofapproved brand and manufacture, including providing and fixing top & bottompivot & double acting hydraulic floor spring type fixing arrangement andmaking necessary holes etc. for fixing required door fittings, all complete asper direction of Engineer-in-charge (Door handle, lock and stopper etc.to bepaid separately) (HSR 12.171) |
| 262 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600(HSR 12.172) |
| 263 | 12.172.2) Up to 10 mm depth and 10 mm width |
| 264 | 12.172.3) Up to 20 mm depth and 20 mm width |
| 265 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (HSR 12.177) |
| 266 | 12.177.1) With toughened glass panes of 6 mm thickness (weight not less sqm than 15 kg/sqm) |
| 267 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) |
| 268 | 13.3.1) Profile B |
| 269 | 13.3.1.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 270 | 13.3.2) Profile C |
| 271 | 13.3.2.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 272 | 13.3.3) Profile E |
| 273 | 13.3.3.1) Fixing with adjustable lugs with split end tail to each jamb |
| 274 | 13.3.3.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 275 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge (HSR 13.5) |
| 276 | 13.5.3) 10x120 mm |
| 277 | 13.5.5) 10x160 mm |
| 278 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). (HSR 13.8) |
| 279 | 13.8.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 280 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M .S. Flat 15x3 mm and nuts & bolts complete. (HSR 13.9) |
| 281 | 13.9.2) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 282 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Hollow pipes section may be used as per requirment)(HSR 13.29) |
| 283 | 13.29.2)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 284 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (HSR 13.30) |
| 285 | 13.30.2) Hot finished seamless type tubes |
| 286 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (HSR 13.37) |
| 287 | 13.37.1) 80x1 .25 mm M.S. laths with 1.25 mm thick top cover |
| 288 | Providing and fixing ball bearing for rolling shutters. (HSR 13.38) |
| 289 | Extra for providing mechanical device chain and crank operation for operatingrolling shutters. (HSR 13.39) |
| 290 | 13.39.1) Exceeding 10.00 sqm and up to 16.80 sqm in the area |
| 291 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (HSR 13.41) |
| 292 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer (HSR 13.42) |
| 293 | 13.42.1) M.S. tube |
| 294 | Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORTH specifications(HSR 17.72) |
| 295 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimetre per square metre, including preparation of surface but excluding grading complete with : (HSR 28.1) |
| 296 | 28.1.1) Bitumen felt (hessian base) type 3 grade I conforming to IS :1322 |
| 297 | Providing and applying waterproofing treatment using two component 100% solid content, hybrid polyurea/polyurethane, rapid curing and highly resHient fully bonded cured to membrane having a mixed density of 1.02g/l. Minimum recommended coverage rate is 1.5Hr/sqm in 2 coats to achieve a total DFT of 1.5mm. cured membrane shall exhibit: 1) Tensile strength ASTM D412: >13 MPa 2)Tear Resistance ASTM D624C : 50 N/mm2 3) Shore A Hardness: BO 4)Elongation ASTM D412 : >450% 5) 1kg, CS 1Dwheels,ASTM D 4060): 1.3 mg/1000 cycles 6) Service temperature: -20\"C to +BO\"C7) Resistant to Fire (EN13501-1)-Class E,dO Manufacturers shall provide Certificate for Zero voe, resistance to fire, 25 years lifeexpectancy test certificate before the start of work.System indudes supply , application and termination of coating all complete as per the manufacturer methodology. Clean the RCC slab/screed surface & wall for treatment by removing dust, dirt and layers ofbconcrete over the surface. etc. by mechanical tools and wire brushing. Pressure grouting at construction joints or honeycombs with non shrink cementations grout by mixing shrinkagecompensating admixture per bag of cement as per manufacturer\"s recommendations. Prepare a side gola of 50X50 mm at the junction using polymer modified mortar. Providingand applying two component 100% solid content, hybrid polyurea/polyurethane membrane at coverage rate of 1.51tr/sqm in 2 coats to achieve a total DFT of 1.5mm. It must be applied utilizing plural heated high-pressure spray proportioning machine/spray gun . Termination shall be done 300 mm above FFI by providing a groove cut of 30mm x 30mm & seal it with shrinkage compensated polymer modified mortar. Lay a 150 GSM geotextile layer to protect the coating from external damage on final coating before laying of screed concrete/finalfinish. It shall be applied as per manufactures specification. Rates are incl of surface preparation, grouting and chemical application only.(Rates for geotextile, protection plaster and final finishes such as screed or Brick bat filling for slope, china mosaic, tiles etc is not included in above item. It will be added as perEiC/clients requirements). (HSR 28.7) |
| 298 | Supplying and applying waterproofing treatment for \"Raft Slab\" by using 1.2 mm thick fully bonded HDPE sheet membrane complying to BS8102:2009/ IS 16471-2017. The HDPE shall be virgin HDPE & not recycled, thickness of bare HDPE shall not be less than 0.8 mm coated with pressure sensitive adhesive layer and a trafficable granular top layer. The HDPE membrane shall have the following typical properties: 1. Tensile Strength : >27 Mpa ( as per ASTM D412)2. Puncture Resistance: >1000N±5% (as per ASTM E154)3. Elongation: >500%4. Peel adhesion to concrete: >1500N/m (as per ASTM D903 Modified)5. Resistance to Hydrostatic Head: >70 metre (as per ASTM D751-06(2011)6. UV exposure test (60 days): No change7. Lap Joint Strength: 1500N/m (as per ASTM D1876)HDPE Membrane shall be installed over the entire PCC area with standard75 mm selvedge laps and end laps overlaid with HDPE Sealed Tape as permanufacturer\"s instructions. The rates are inclusive of supply and installationof membrane as per manufacturer methodology.The rates are inclusive of surface preparation, injection grouting at honeycombed areas all complete as per manufacturer methodology. (HSR 28.8) |
| 299 | Supplying and installing 1.5 mm thick SBS membrane, self-adhesive polymer modified bitumen comprising of a cross laminated HDPE carrier film. Membrane shall come with a BBA certification giving a durability of membrane up to the life of the structure and shall have Tensile Strength : L:215N/50mm T: 220N/50mm ( as per BS EN12311-1), Elongation : L: 324% and T: 238% (as per BS EN12311-1), Water Vapour Permeability : Impermeable to ISO 12572 (as per BS EN 1931), Resistance to Hydrostatic Head: Min 60m( as per ASTM D5385), Adhesion to primed concrete : 4.9mm (as per ASTM D1000). The surface shall be primed using Bituminous Primer and membrane shall be installed with an edge lap of 50 mm and end lap of 150 mm. Membrane Termination shall be done by providing a groove cut of 30mm x 30mm, put the membrane inside the groove, nailing of aluminium flashing at 200mm c/c & sealing with a suitable PU Sealant at the termination of waterproofing membrane at minimum of 300mm height on the vertical wall, as per the manufacturer\"s Specification. Membrane shall be protected using 8mm thick dimple board for protection as per manufacturer\"s recommendation followed by backfilling. The rates are inclusive of surface preparation, crack filling, injection grouting at honeycombed areas, coving, priming all complete as per manufacturer methodology but excluding for protection board. (HSR 28.11) |
| 300 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 1 O cm.(c) third layer of 1.5 mm thickness consisting of sluny of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) for the purpose of measurement the entire treated surface will be measured. (HSR 28.16) |
| 301 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations (HSR 28.17) |
| 302 | (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment |
| 303 | (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1 :5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1 :5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs. |
| 304 | (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge |
| 305 | (d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1 :4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. |
| 306 | (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. \"All above operations to be done in order and as directed and specified by the Engineer-in-Charge |
| 307 | 28.17.1) With average thickness of 120 mm and minimum thickness at khurra as 65 mm |
| 308 | (HSR 28.18) Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage & water treatment plant, tunnels I subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer\"s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACl-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared withcontrol concrete as per DIN 1048 and resistant to 16 bar hydrostaticpressure. The crystalline admixture shall be capable of self-healing of cracksup to a width of 0.50mm. The work shall be carried out all complete as perspecification and the direction of the Engineer-in-charge. The productperformance shall carry guarantee for 1 O years against any leakage. |
| 309 | Grading roof for water proofing treatment with (HSR 28.25) |
| 310 | 28.25.1) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 311 | Providing and laying cinder concrete in cement 1 :15 (1 cement and 15 cinder) on terraced roofs & (up to three Storeys), laid to slope, including consolidating the same. (HSR 28.27) |
| 312 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1 :4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1: 1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. (HSR 28.50) |
| 313 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (HSR 29.2) |
| 314 | (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.29.6) |
| 315 | For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in Sqm. |
| 316 | (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. |
| 317 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (HSR 29.6) |
| 318 | (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part Ill (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: |
| 319 | (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. |
| 320 | (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimetre for holding glass. |
| 321 | (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. |
| 322 | e) Making provision for drainage of moisture/ water that enters the curtainglazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer,dully approved by Engineer-incharge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer |
| 323 | Notes for Item 29.6:1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm up to two decimal places. |
| 324 | 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. |
| 325 | 3. Competent authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. |
| 326 | 3.1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr |
| 327 | 3.2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. |
| 328 | 3.3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml |
| 329 | 3.4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330- 10 testing method for a range upto 50 mm |
| 330 | 3.5.Seismic Movement Test (up to 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. |
| 331 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 332 | 3.6 Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) up to 2000 ml |
| 333 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-Ill). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. Unit The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.(HSR 29.7) |
| 334 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer. (HSR 30.16) |
| 335 | 30.16.2) With cement mortar 1 :4 ( 1 cement: 4 coarse sand) |
| 336 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (HSR 30.21) |
| 337 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance i!: 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main \"T\". The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.(HSR 32.47) |
| 338 | 32.47.2) With 20 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.7) |
| 339 | 32.47.3) With 16 mm thick bevelled tegular mineral fibre Anti microbial false ceiling tile confirming to ISO 5 (class 1 00 ) specifications |
| 340 | GI barbed wire fencing (HSR 34.29) |
| 341 | 34.29.2) G.I Barbed Wire Fencing 1.8 Metre HighProviding and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres centre to centre founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and comer post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, tum buckles etc complete as per clause 807 Cost of excavation for foundation and foundation concrete to be added separately in the cost estimate as per approved design. The rate for these items may be taken from respective chapters. |
| 342 | CIVIL (NS PART) |
| 343 | Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required by approving engineer, made of a high density fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 5mm/ 13mm/ 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.59. The panels shall be mounted on special aluminium splines using clips provided by manufacturer and approved by Engineerin-Charge. INSTALLATION:Install wooden battens of section 50x50mm or as approved on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Manufacturer over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting of width 50mm or more as required Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden molding of matching color (provided by others). Installation to be carried outTrained Installation team & Installation should be carried out as perrecommended procedure. To use the same panels in ceiling The tile shall be laid onPrelude 43 with 24 mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm and a load carrying capacity of 17.8 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and to make any design 12 mm ply should be used |
| 344 | Providing and supplying ‘Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as per the choice of size 600x600mm, 600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel Impalers supplied by manufacturer Ceiling Solutions and construction adhesives as per the instructions laid down by the manufacturer. The works shall complete in all respects as per manufactures specifications and direction of Engineer-in Charge. INSTALLATION:3/4/5 nos. wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by Trained Installation team or equivalent & Installation should be carried out as per Manufacture\"s recommended procedure. |
| 345 | 300mm wide Perforated panel + NWT - Providing & Fixing of 300mm wide perforated 2.0 mm diameter 5mmc/c pasted with NWT corrosion resistant Aluminium Magnesium Alloy metal ceiling consisting of panel 300m widex 30 mm deep x 0.7 mm thick with bevel edge having panel length up to 6 mtrs. coil coated on a continuous paintline, Double baked and roll formed for higher straight and good roll forming characteristics with21% perforation in White finish color. The panel ends are raised up to 29 mm . The panel about eachother with a narrow V groove. Panel shall be clipped to a backed enamelled aluminium panel carrierof 41.5 mm wide x 62 mm deep x 0.95 mm thick in standard length of 5 mtrs. made of double bakedenamelled aluminium magnesium alloy AA5052 black with cut outs to hold panels module of 300 mm andat distance of 2.4 mtrs. the carrier shall be suspended by means of GI suspension rod 4mm diameterand suspension clip at 1.3 mtr. distance. The coils to go through 4 stages of pre-treatment, threetimes oven baked through conversion coating, priming and finish coat ensuring superior adhesion,highcorrosion resistance andgoodcolour stability. The coils to be painted on both sides afterdegreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns,exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colourof 15 microns. If any MS Sub structure is required, it shall bepaidseparatelyinthe respective individual item. Paint finish : Aluminium panels shall be chromatised for maximum bond between metal and paint,enamelled twice under high temperature one side with full primer and Luxacote finish, the otherside (Inner side) with a primer coat and skin coat on a Continuous paint line. Mode of Measurement:Measurements shall be wall to wall without deductions for lights, diffusers, columns etc. Green-pro certification: For LEED certification by Indian Green Building Council (IGBC) and ISO 9001: 2015Quality Management System Certification. |
| 346 | Providing and fixing of 8 mm thick Laminated wooden flooringClassification of Use 23/32 (Heavy Domestic/General Commercial) with a Surface Abrasion Resistance of class AC4 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1291 mm X 135 mmhaving Uni fitlocking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge). |
| 347 | Providing and fixing 2.00 MM thick PVC Flooring, Roll size 2 Mtr.X15 Mtr., Homogeneous Vinyl floor covering which is dissipative and antistatic (< 2 kV), having overall thickness 2.00 mm and 1.00mm PVC wear layer and Intermediate Carbon Layer and PVC Backing with easy to install embossing. Technical Specifications: “MADE IN INDIA”PVC Flooring ISO 10874:2012 and BS EN 649:2011 (Group P) and Slip resistance R10. Its Total Weight is 3500g/m2 in Sheet of size 15mtrs x 2mtrs. It’s having permanent antistatic properties (EN 1081), it acts as a continuous dissipater (106 = Rt = 109). Anti-fungal and anti-bacterial flooring which complies with the EN 649 (34 / 43) and having abrasion resistance Group P wear rating. It is suitable for heavy traffic areas. Its Residual Indentation is ~0.03 (< 0.10) mm as per standard EN 433. Dimensional Stability as per EN 434 is < 0.40% and flexibility as per EN435 is < 20mm. Electrical resistance as per EN 1081 is < 109O (Anti-Static) and passed with Continuous Caster Chair Test. Sound Insulation as per EN ISO 717-2 is 4dB and Reaction to Fire as per EN 13501-1:2007+A1:2009 is Bfl-S1 Class. Electra® is VOC (= 1/2 Chronic REL) and formaldehyde compliant (= 9.0 µg/m3) according to the CDPH/EHLB/Standard, Method V1.1-2010 (certificate 120316-01). The works shall complete in all respects as per manufactures specifications and direction of Engineer |
| 348 | Providing and fixing 2.00 MM Thick static Conductive Vinyl Flooring Size: 2 Mtr.X 15 Mtr., Electrical resistance of (104 = Rt = 106) (EN 1081)., Slip resistance, Termite and Bugs proof, Superior Stain and Scratch Resistance, Fire Resistance, Chemical Resistance, PUR Polyurethane reinforcement, Phthalate free, Zero VOC emissions. Technical Specifications: “MADE IN INDIA”PVC Flooring ISO minutes 10582, BIS Marking 3462:1986, FloorScore® certified for indoor air quality (IAQ), Abrasion resistance EN 660 - 2 Group T, EN 660 -2 Volume loss mm3 < 2 ASTM D3389 (weight loss / 1000 cycles) g < 0.40, Slip resistance DIN 51130 Ramp Test R 10, EN 13893 ASTM D2047 Coefficient of friction DS Sq. Mtr. (>0.30)Pass(0.70avg.), Static electrical propensity EN 1815 kV < 2.0, Dimensional stability ISO 23999-EN 434 =0.40%, Flexibility ISO 24344-EN 435 20mm mandrel No Cracking, ASTM F137 Pass, Colour fastness to light EN ISO 105-B02 Degrees = 6, ASTM F1515 ?E =800 after 300 hours (colour change) Pass, Fire Resistance IMO RES A 653 (16), IMO MSC 61 (67), Reaction to fire EN ISO 9239-1 kW/m2 = 8, EN ISO 11925-2 Pass, EN 13501-1 : 2007+A1 Class Bfl - S1, ASTM E 648 Type 1, Smoke density ASTM E 662 Dm< 450 (Pass), Stain & chemical resistance ISO 26987-EN 423 Index(Excellent resistance) ASTM F925 Resistance Pass . Copper Wiring/strips Grid has to be laid on the floor .The works shall complete in all respects as per manufactures specifications and direction of Engineer |
| 349 | Providing and fixing of chicken wire mesh/ fibre mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer |
| 350 | Proving and fixing Brass Lock(Cupboard locks) |
| 351 | Proving and fixing Door fitting door handle set of 2 nos. Lock 60mm cylinder ICK chrome and 240mm ECO lock body stain like Godrej ( Product code 6636 and 7744, 6700 i/c all necessary nails screws etc. Complete in all respect. |
| 352 | Proving and fixing Door fitting i/c door handle set of 2 nos. Along with baby latch set for toilets doors stain like Godrej ( Product code 6636) i/c all necessary nails screws etc. Complete in all respect. |
| 353 | Providing & filling Epoxy bond coat around the pipes with sand sprinkling extended 25mm above the slab top level & Grouting & Sealing around the periphery joints of pipes passing through on the floor & walls by filling microconcrete/ non shrick free flow groutin the gap between the cut cuts in the slab & the pipe surface & sealing around the periphery joints of the pipes / sleeves followed by providing and applyingPure Polyurethane system in a widthof100 mmincluding embedding polyester reinforcing fabric between the two coats & applied around the pipe periphery all as per manufactures recommendation etc. complete. |
| 354 | Providing & fixing of roof with multilayer standing seam polycarbonate panel system of 18mm thickness (minimum) including all standard fixing accessories on top of the supporting structure(Paid extra in another item) complete & as per the direction of the engineer in charge. The panelsshould work on angular daylighting concept with translucent and opaque combination of louvers inside, for better thermal insulations and diffusion of light especially with white and clear combination designed for tropical regions & shading throughout the day for better ambient temperature below the roof. Panels shall have a minimum seven layers with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. The entirepanel system shall be with a width from min. 1200 mm. Bigger width and minimal junctions should be preferred for better performance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels have to be fixed on Purlin with snap on connectors with grip lock double tooth locking mechanism and will be secured on MS structure / purlins (will be paid Separately) with HDSS Fastener and double tooth polycarbonate connector for best stability and having a pull-out load of min. 7000N (7KN) testedas per ISO 6892:1998 and IS 1608: 2005. Panels cell structure be in truss bridge design or commonly called X structure for better strength and stability.Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate Panel which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 2.0 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar (all mill finish) for ends as required. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering |
| 355 | Supply and apply of Handrail / bumper gaurd143mm high handrail / bumper provides pedestrian support and effective impact protection. mounting brackets. Cover should comply with the below testing1. The National Testing Laboratory ESA certifiedwith a fire rating class M1 for its low flammability and self-extinguishing properties. 2. In compliance with the European Standard NF 13501-1and also been rated B-s2, d0.3.The higher heating value (HHV) is the amount of heat released by the combustion per unit of mass of a substance. Following the European Standard EN ISO 1716, CSTB determined in their test report the mean Higher Heating Value of : mean HHV = 17,828 MJ/k4.Possesses excellent scratch resistance and outstanding shock absorbency properties. Tests carried out in standard conditions of use showed that our tested products had suffered no damage after they were hit by a load of 250 kg impacting at 5 km/h.5.Nosoco.Tech, Lyon tested our material according to the European ISO norm 22196 and concluded that our Acrovyn®Bactericide wall protection sheets and MCE 40/45 handrails are truly bactericide.6.National Laboratory of Metrology and Testing (LNE) to studyfor VOC emissions and LNE classified in their test report from April 19, 2011 our product with: A +7.DISINFECTION AND CLEANING TEST CARRIED OUT BY THE LOUIS PASTEUR INSTITUTE IN STRASBOURGi)SANIVAP certifies thatproducts are fully compatible with hot steam cleaning and disinfection procedures.ii)Laboratories ANIOS certify that their cleaning and disinfection products are perfectly suitable for use onproducts. |
| 356 | Supply and Apply of 76mm wide Corner guard made of a sturdy aluminum profile andshockproof coating to protect corners against damage from rolling gear.1. The National Testing Laboratory ESA certifiedwith a fire rating class M1 for its low flammability and self-extinguishing properties. 2. In compliance with the European Standard NF 13501-1and also been rated B-s2, d0.3.The higher heating value (HHV) is the amount of heat released by the combustion per unit of mass of a substance. Following the European Standard EN ISO 1716, CSTB determined in their test report the mean Higher Heating Value of : mean HHV = 17,828 MJ/k4 Possesses excellent scratch resistance and outstanding shock absorbency properties. Tests carried out in standard conditions of use showed that our tested products had suffered no damage after they were hit by a load of 250 kg impacting at 5 km/h.5.Nosoco.Tech, Lyon tested our material according to the European ISO norm 22196 and concluded that our Bactericide wall protection sheetstruly bactericide.6.National Laboratory of Metrology and Testing (LNE) to study for VOC emissions and LNE classified in their test report from April 19, 2011 our product with: A +7.DISINFECTION AND CLEANING TEST CARRIED OUT BY THE LOUIS PASTEUR INSTITUTE IN STRASBOURGi)SANIVAP certifies thatproducts are fully compatible with hot steam cleaning and disinfection procedures.ii)Laboratories ANIOS certify that their cleaning and disinfection products are perfectly suitable for use onproducts. |
| 357 | Providing and fixing Glass Reinforced Concrete (G.R.C) Screens casted with \"Spray Mix\" concrete design in approved size, pattern, thickness of 50mm on the outer Border & 25-30mm for Internal member and shade. The Screens should be made from ‘53 grade’ White Portland Cement , White Quartz fine graded sieved Silica Sand, Alkali Resistant Glass Fibre , Super Plasticizers , Polymers and U.V resistant Synthetic inorganic pigments should be used for pigmentation . The Screens casting shall take place with layering methodology using- Direct Power Spray machines. The GRC Screens flexural strength average L.O.P should be above or equivalent to 6 N/mm2 & M.O.R should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples. The fixing of Screens should be done using ‘Dry fixing’ method onto structural support members i.e. R.C.C, Brick work, MS Framework. SS / MS Galvanized CLAMPS & PINS also if required fasteners to be used . ALL CAST IN SOCKET TO BE EPOXY PRIMER COATED. ELECTRODES to be used . Vendor shall submit shop drawings of same, the drawings to be duly approved from Engineer in charge at site. |
| 358 | Supply & Installation of Wet cleaning of Painted elevation/Exposed Bricks/Sand Stone/Red clay tiles/ GRC Screens with High Pressure Jet with minimum 120 bar pressure to wipe out foreign particles on the surface and then allow the surface to dry for at-least 24 Hours .As a second step, providing and applying \" Anti- Fungal Water Repellent Coating \" consisting of having accreditation from CBRI Roorkee on elevation by spraying complete in all respect and heights over dry surface as per direction of the manufacturer and Engineer-in-charge complete in all respect |
| 359 | Cutting Chasing in brick/ concrete wall for providing skirting flush with plaster.. |
| 360 | Powder coated folding handle 100 mm |
| 361 | Providing and fixing 25 mm thick finished red stone both side slightly rounded for partition and shelves in CB. |
| 362 | Providing and fixing MS rod 8mm fully thereaded with nut bolts and washer inserted in aluminium section of windows and doors shutters, complete in all respects. |
| 363 | Providing and fixing 25 mm dia or ovele shape SS rod/ pipe for curtains/ cupboards including clamps, wall to wall clamps, side knobe etc as per requirment. complete in all respect. |
| 364 | Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing |
| 365 | Providing and fixing 12mm thick plasto board (weight minimum 23.00 kgper board of size 8\" x 4\") (heavy grade) for kitchen, cupboard etc. inclding acessories for fixing such as adhesive screws, beadings etc. complete in all respect |
| 366 | Providing and fixing 18mm thick plasto board(weight minimum 35.00 kg per board of size 8\" x 4\") (heavy grade)for kitchen, cupboard etc. inclding acessories for fixing such as adhesive screws, beadings etc. complete in all respect |
| 367 | Providing and fixing Electric Chimney in Kitchen 900mm wide with toughened glass top self cleaning complete in all respect |
| 368 | Providing and fixing Bin Holderincluding accessories for fixing such asNails & screw etc complete in all respect |
| 369 | Providing and fixing detergent holderincluding accessories for fixing such asNails & screw etc complete in all respect |
| 370 | Providing and fixing Botttle pullout in wire basket 200 mmincluding accessories for fixing such asNails & screw etc complete in all respect |
| 371 | Providing and fixing S carouselincluding accessories for fixing such asNails & screw etc complete in all respect |
| 372 | Providing and fixing wire basket cutlery perforated (32\"\"x20\"\"x4\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 373 | Providing and fixing wire basket cutleryplain (32\"\"x20\"\"x4\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 374 | Providing and fixing wire basket cutleryThali (32\"\"x20\"\"x8\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 375 | Providing and fixing wire basket cutleryThali (17\"\"x20\"\"x8\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 376 | Providing and fixingwire basket cutleryplain (17\"\"x20\"\"x8\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 377 | Providing and fixingwire basket cutleryplain (15\"\"x20\"\"x4\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 378 | Providing and fixingGrain trolley with frame (15\"\"x20\"\"x12\"\")including accessories for fixing such asNails & screw etc complete in all respect |
| 379 | Providing and fixing Hinges 0 degree including accessories for fixing such asNails & screw etc complete in all respect |
| 380 | Providing and fixing Hinges 8 degreeincluding accessories for fixing such asNails & screw etc complete in all respect |
| 381 | Providing and fixing 20 inch Telescopic channel having normal closingincluding accessories for fixing such asNails & screw etc complete in all respect |
| 382 | Providing and fixing shocker including accessories for fixing such asNails & screw etc complete in all respect |
| 383 | Providing and fixingSS Handel 6 inch(as approved by Engineerincluding accessories for fixing such asNails & screw etc complete in all respect |
| 384 | Providing and fixingSS Handel 8 inch(as approved by Engineerincluding accessories for fixing such asNails & screw etc complete in all respect |
| 385 | Providing and fixingSS Handel 12 inch(as approved by Engineerincluding accessories for fixing such asNails & screw etc complete in all respect |
| 386 | Providing and fixingSS Handel 18 inch (as approved by Engineer including accessories for fixing such asNails & screw etc complete in all respect |
| 387 | Providing and fixinginox pvc legs including accessories for fixing such asNails & screw etc complete in all respect |
| 388 | Providing and fixingPVC Skirting 75mm wide(as approved by Engineerincluding accessories for fixing such asNails & screw etc complete in all respect |
| 389 | Providing and Fixing Pristine white uPVC windows Company must have own production facilities (extrusion & fabrication) & control the entire cycle from Extrusion to Installation to Post Sales Service. Profile frame of high impact modified grade uPVC, which shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875- III before material supply. Minimum steel reinforcement thickness of 1.2mm to 2.5mm. uPVC Windows must be fabricated with fusion welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted must be of SS 304 grade for coastal areas & for non-coastal it should be Non-SS,except handles to be of zinc/Al. alloy casted with powder coated with weather seal (EPDM/TPE). There would be Warranty of 10 years on Profile & one year on hardware from the date of installation. UPVC windows must be installed by profile manufacturer only.Casement/Villa Window with mesh panel (Big Series):Providing & Fixing Casement Window with mesh panel of Outer frame 118mm X 58mm and Sash of 65mm X 80mm, wall thickness of profile must be min 1.8± 0.3mm, single glazing bead of appropriate dimension for 6mm clear toughened Glass & SS/ Fibre Mesh. |
| 390 | Design supply fabrication and fixing of acrylic non tactile audio building layout as per the approved size design and make having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case sans serif letters of 12mm height, raised 3mm above base plate and grade2/grade 1 braille to be integral with the sign face and be raised 0.05mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed complete as per design/ specifications and guidelines as per entire satisfaction of Engineer-in-charge.(NS) |
| 391 | Providing and fixing Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying \"YOU ARE HERE\" of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4\" in height. The size of the board shall be 2ft x 2ft and shall be oriented tothe position of the viewer as per design/specificaitons and guidelines as perentire satisfaction of the the Engineer-in-charge (NS) |
| 392 | Providing and fixing of SS (304 grade) non-glare multilingual braille (raised dots) ENTRANCE SIGNAGE (1ft x 1ft) as per approved design and make indicating the name of the building having 1.2mm thick SS non glare blue coloured base plate with the Universal accessibility symbol and upper case sans serif word written in hindi using Devanagari script of height 15mm in white colour. Grade 2/ grade 1 braille to be etched / engraved and be raised 0.50mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200mm from the finished ground/ floor level using the necessary hardware specified by the manufacturer and to be installed entire satisfactions and guidelines as per the entire satisfaction of Engineer-in-Charge. (NS) |
| 393 | Providing and fiixing acrylic multilingual Braille (raised dots) DIRECTIONAL SIGNBOARDS of size 6\" x 9\" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) |
| 394 | Providing and fixing acrylic multilingual Braille signboards (DOOR SIGNBOARDS) of size 6\"x 9\" / 12\" x 5\" for room titles, designed as per the drawings issued and having 3mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) |
| 395 | Providing and fixing of SS (304 grade), non-glare Signage board (2 ft. x 2 ft. 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/Grade 1 Braille (raised dots)to be Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) |
| 396 | Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc.complete in all respect to the entire satisfaction of Engineer-in-charge (NS) |
| 397 | Providing and fixing 50mm wide colour contrast \"EDGE STRIPS\" self addhesive on treads of stair cases to help people with visual diabilities and elederly even in dim light condition complete in all respect to the entire satisfaction of Engineer-in-charge (NS) |
| 398 | Providing and fixing acrylic/ alluminium Braille indicators for handrails of the approved design and make having Braille dots raised above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer (NS) |
| 399 | Providing and fixing \"U\" shaped \"Flip Bar\" 650mm long and 30mm-40mm thick diameter of 18-gauge with hinge made up of \"stainless steel\" of International Standard in the toilets to make them \"Unisex Toilet\" for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS) |
| 400 | Providing and fixing \"L\" shaped \"Grab Bar\" 650mm long and 30mm-40mm thick diameter of 18-gauge made up of \"stainless steel\" of International Standard in the toilets to make them \"Unisex Toilet\" for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS) |
| 401 | Providing & Fixing of Pictorial layout plan of size 900mmx600mmas approved design, made of 3mm thick acrylic non glare base plate and non glare cut out symbols with grade One Braille on which individual facility points, like inquiry, reception, restrooms, medical room/ first aid, cafeteria or breakout area, lounge, meeting room, conference room etc. present the respective floors with pictograph wherever needed all in tactile raised by minimum of 1to2 mm in various colours to make it legible for seniors, partial vision impaired etc. All the facility names should be in Braille, along with English or Hindi.The entire block of tactile signs should be mounted on wall or on a slant/ inclined framefor easy reading. The map to be installed at specified locations and installed at a height of 800mm from ground level complete in all respect as per Harmonized guideline & satisfaction of Engineer-in-charges. ( N.S) |
| 402 | INTERNAL PLUMBING HSR |
| 403 | Excavating trenches of required width for pipes, cables, etcincluding excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: (HSR 2021/4.14) 4.16) 4.16.1.3 Pipes, cables etc. exceeding 300 mm metre dia but not exceeding 600 mm |
| 404 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1) 6.1.3) 1 :2 :4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 gradedstone aggregate 40 mm nominal size) |
| 405 | 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 406 | 9.18) Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 407 | 9.57)Providing and fixing on wall face Unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 408 | 9.57.2)110 mm diameter |
| 409 | 9.57.3)150 mm diameter |
| 410 | 9.58) Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. |
| 411 | 9.58.1) Coupler |
| 412 | 9.58.1.2) 110 mm |
| 413 | 9.58.1.3) 150 mm |
| 414 | 9.58.5) Bend 87.5° |
| 415 | 9.58.5.2) 110 mm bend |
| 416 | 9.58.5.3) 160 mm bend |
| 417 | 9.58.6) Shoe (Plain) |
| 418 | 9.58.6.2) 110 mm Shoe |
| 419 | 9.58.6.3) 150 mm Shoe |
| 420 | 9.59) Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1 :4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 421 | 9.59.2) 110 mm |
| 422 | 9.59.3) 150 mm |
| 423 | 9.60) Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams. |
| 424 | Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 2021/20.26)20.26.1) 11.43 cm thick wall |
| 425 | 20.26.2) 22.86 cm thick wall |
| 426 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.. (HSR 2021/ 21.84) |
| 427 | 21.84.3) Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame single seal pattern SFRC with heavy duty |
| 428 | Extra for every 0.30 metre depth of Inspection chamber(HSR 2021/ 21.85)21.85.3) 600 mm x 900 mm inside |
| 429 | 22.1) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps(HSR 2021/ 22.1.1) |
| 430 | Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (HSR 2021/ 22.5) |
| 431 | Providing and fixing white vitreous chinaware laboratory sink including making all connections excluding cost of fittingsSize 600x450x200 mm(HSR 2021/ 22.7.2) |
| 432 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (HSR 2021/ 22.10)22.10.1) Kitchen sink with drain board22.10.1.3) 510x1040 mm bowl depth 200 mm |
| 433 | 22.10.2) Kitchen sink without drain board22.10.2.1) 610x510 mm bowl depth 200 mm |
| 434 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (HSR 2021/22.14) 22.14.1) Semi rigid pipe22.14.1.1) 32 mm dia |
| 435 | 22.14.1.2) 40mm dia |
| 436 | 22.15) Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 437 | 22.16) Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint |
| 438 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm PVC P or S trap, 10 litre low level white P.V.C. flushing cistern, /chinaware flushing system including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (HSR2021/22.22)22.22.1) White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 439 | Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, PVC trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : (HSR2021/22.26)22.26.1) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 440 | 22.26.3) Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern |
| 441 | 22.26.4) Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern |
| 442 | 22.32) Providing and fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: (22.32.1) White vitreous chinaware dual purpose WC pan with white solid plastic seat and lid with white vitreous chinaware flushing cistern and C.P. flush bend. |
| 443 | Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR2021/22.33) |
| 444 | Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make asapproved by Engineer - in - charge. (HSR2021/22.38) |
| 445 | Providing and fixing toilet paper holder : (HSR2021/22.42)22.42.1) C.P. brass |
| 446 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (HSR 2021/ 22.85)22.85.2) 20 mm nominal outer dia Pipes |
| 447 | 22.85.3) 25 mm nominal outer dia Pipes |
| 448 | 22.85.4) 32 mm nominal outer dia Pipes |
| 449 | 22.85.5) 40 mm nominal outer dia Pipes |
| 450 | 22.85.6) 50 mm nominal outer dia Pipes |
| 451 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (HSR2021/22.86) 22.86.2) 20 mm nominal outer dia Pipes |
| 452 | 22.86.3) 25 mm nominal outer dia Pipes |
| 453 | 22.86.4) 32 mm nominal outer dia Pipes |
| 454 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work· Exposed on wall(HSR2021/22.88)22.88.1) 15mm dia nominal bore |
| 455 | 22.88.2) 20mm dia nominal bore |
| 456 | 22.88.3) 25 mm dia nominal bore |
| 457 | 22.88.4) 32 mm dia nominal bore |
| 458 | 22.88.5) 40 mm dia nominal bore |
| 459 | 22.88.6) 50 mm dia nominal bore |
| 460 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc. (HSR 2021/ 22.91) |
| 461 | 22.91.7) 65 mm dia nominal bore |
| 462 | 22.91.8) 80 mm dia nominal bore |
| 463 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) (HSR2021 / 22.94)22.94.2) 20mm nominal bore |
| 464 | 22.94.3) 25 mm nominal bore |
| 465 | 22.94.4) 32 mm nominal bore |
| 466 | 22.94.5) 40 mm nominal bore |
| 467 | 22.94.6) 50 mm nominal bore |
| 468 | 22.94.7) 65 mm nominal bore |
| 469 | 22.94.8) 80 mm nominal bore |
| 470 | Providing and fixing gun metal gate valve with C.I. wheel/ handle of approved quality (screwed end): (HSR2021/ 22.98)22.98.2) 20 mm nominal bore |
| 471 | 22.98.1) 25 mm nominal bore |
| 472 | 22.98.3) 32 mm nominal bore |
| 473 | 22.98.4) 40 mm nominal bore |
| 474 | 22.98.5) 50 mm nominal bore |
| 475 | 22.98.6) 65 mm nominal bore |
| 476 | 22.98.7) 80 mm nominal bore |
| 477 | Providing and fixing Unplasticised PVC connection pipe with brass unions : (HSR2021/22.101)22.101.1) 30 cm length22.101.1.1) 15 mm nominal bore |
| 478 | Providing and fixing C.P. brass shower rod with 15 or 20 mm inlet:(HSR 2021/ 22.102)22.102.2) 150 mm diameter |
| 479 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (HSR2021/ 22.103)22.103.2) 20 mm nominal bore |
| 480 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (HSR 2021/ 22.104)22.104.1) 15 mm nominal bore |
| 481 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (HSR 2021/ 22.105)22.105.1) 15 mm nominal bore |
| 482 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (HSR 2021/22.107)22.107.1) 15 mm nominal bore |
| 483 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (HSR 2021/22.108)22.108.1) 15 mm nominal bore |
| 484 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.. (HSR2021/ 22.109) |
| 485 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.(HSR 22.110.1) 15 mm nominal bore |
| 486 | Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. (HSR 2021/22.212.1) C.P. brass22.212.1.2) Two Way |
| 487 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (HSR 2021/22.117) |
| 488 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (HSR 2021/22.118) |
| 489 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (HSR 2021/ 22.119)22.119.2) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 490 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms (HSR 2021/22.127) |
| 491 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: (HSR 2021/ 22.163) |
| 492 | 22.163.3) 200 mm diameter |
| 493 | 22.163.4) 250 mm diameter |
| 494 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight SFRC/ concrete cover with frame of 300 x300 mm size (inside) as per standard design: (HSR 2021/ 22.166)22.166.1) 100x100 mm size P type22.166.1.1) With common burnt clay non-modular bricks of class designation 10 |
| 495 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 2021/ 22.181) |
| 496 | Providing and fixing in position best Indian make C.P. brass Tooth Brush Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc.(HSR2021/22.213)22.213.1) Tooth Brush-cum-Tooth Paste holder |
| 497 | Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6\" (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proof.(HSR 2021/ 30.82)30.82.1) Drain pipe of 150mm internal dia |
| 498 | 30.82.2) Drain pipe of 100mm internal dia |
| 499 | INTERNAL PLUMBING (NS) |
| 500 | Fixing, testing & commissioningof Wall Mounted C.P. Brass Single lever Sink Mixer with swinging spout of required size including cuttinig and making good the wall wherever required asapproved byEngineer-in-charge Kitchen Sink Mixer |
| 501 | Providing and fixing 300 mm wide RCC drain channel with 350 mm wide ms grating complet in all respect as per approved drawing and design . |
| 502 | Fixing, testing & commissioningof concealed divertor set comprising of C.P Wall mixer concealed in wall, wall sport, overhead shower head with C.P shower arm with swivel joint, C.P brass wall Flange complete including cutting and making good the wall whereever required.Concealed divertor, Head shower & spoutas approved by Engineer-in-charge |
| 503 | P&F in positionoval shaped under / over counter wash basinincluding cost of 32mm dia C.P. waste complete in all respect.as approved by Engineer-in-charge |
| 504 | P/Fin position 100mm dia C.P. Jali (openable) on floor trap of approved ), heavy quality as approved by Engineer-in-charge |
| 505 | P/F in position C.P. flange heavy duty as approved by Engineer-in-charge |
| 506 | Pdg.and fixing in position 5mm thick looking mirror bevelled on sides fixing in position with necessaryC.P. screws washer and strudscomplete as approved by Engineer-in-charge |
| 507 | Providing & fixingSWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect (NS) a)160mm dia pipe |
| 508 | B) 110mm dia pipe |
| 509 | C) 90mm dia pipe |
| 510 | Special for 160 mm dia pipei) Clip/ Clamp |
| 511 | ii) Coupler/ Socket |
| 512 | iii) Bend with Door |
| 513 | iv) Single T |
| 514 | v) Single T with Door |
| 515 | Special for 110 mm dia pipei) Vent Cowl with Jali |
| 516 | ii) Pipe Clip/ Clamp |
| 517 | iii) Coupler/ Socket |
| 518 | iv) Bend with Door |
| 519 | v) Single T |
| 520 | vi) Single T with Door |
| 521 | vii) P-Trap (DS) 110x110mm |
| 522 | Special for 90 mm dia pipei) Vent Cowl with Jali |
| 523 | ii) Pipe Clip/ Clamp |
| 524 | iii) Coupler/ Socket |
| 525 | iv) Bend with Door |
| 526 | v) Single T |
| 527 | vi) Single T with Door |
| 528 | vii) Nanhi Trap with Jali (110x110mm) |
| 529 | Basement sump pump , 5 HP, 3 Phase, delivery pipe size 65 mm, |
| 530 | RO PLANT 3500 LPH MGF Model WWMGF_FRP2162 Flow Rate : 5 M3/Hr Max. Design Pressure : 4 Kg/cm2 Service Velocity : 25 M/Hr Operation : Manual MOC : FRP ACF Model WWACF_FRP3072 Flow rate : 5 m3 /hr Max. Design Pressure : 4 Kg/cm2 Service Velocity : 18 M/Hr Operation : Manual MOC : FRP RO System Model WWSRO-3500 Permeate Flow rate : 3500 LPH Recovery : 75% Operating Hours : 10 hr Operation : Semi-Automatic |
| 531 | RO PLANT CAPACITY - 500 LPH RECOVERY -50% ELECTRICAL CONNECTION - 415 V, 3 PHASE, 50 HZ TDS - < 100 PPM |
| 532 | 1000L STORAGE TANK AND DRINKINGFOUNTAIN |
| 533 | P/F zinc coated clamp 90mm and 110mm dia i/c cost of 12mm screw G.I. rod adjustable and fastner in RCC roof etc. complete in all respect (NS) |
| 534 | P/F zinc coated clamp 160mm dia i/c cost of 12mm screw G.I. rod adjustable and fastner in RCC roof etc. complete in all respect (NS) |
| 535 | EXTERNAL WATER SUPPLY SYSTEM (HSR PART) |
| 536 | Excavating trenches of required width for pipes, cables, etcincluding excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: (HSR 2021/ 4.16) 4.16.1.3 Pipes, cables etc. exceeding 300 mm metre dia but not exceeding 600 mm |
| 537 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1) 6.1.3) 1 :2 :4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 gradedstone aggregate 40 mm nominal size) |
| 538 | 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 539 | Providing & fixing cast iron double flanged swing check type reflux (nonreturn) valves PN-1.6 marked with IS:5312 including nuts & bolts markedwith IS:1363, rubber sheet marked with IS:638 etc., carriage loading,unloading, stacking, handling, re-handling etc. Complete in all respect tothe satisfaction of Engineer-in-charge (HSR 20.11) |
| 540 | 20.11.1) 80 mm i/d |
| 541 | 20.11.2) 100 mm i/d |
| 542 | 20.11.3) 150 mm i/d |
| 543 | Providing and fixing C.I. Kinetic air valves conforming to and marked withIS: 14845 including carriage, loading, unloading stacking, handling, rehandling etc., drilling, tapping, screwing in valves connections complete inall respects to the satisfaction of Engineer-in- Charge. (HSR 20.15) |
| 544 | 20.15.1) 80 mm i/d |
| 545 | 20.15.2) 100 mm i/d |
| 546 | 20.15.3) 150 mm i/d |
| 547 | Providing, lowering, laying in trenches, aligning, fixing in position andjointing Ductile Iron (DI) ISi marked K-9 grade S&S pipes as per 15:8329- 2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.Note: E/W to be measured and paid separately. (HSR 2021/ 20.63)20.63.2) 150 mm i/d |
| 548 | 20.63.3) 200 mm i/d |
| 549 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipes as per IS:8329- 2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer-in-Charge. Note: E/W to be measured and paid separately. (HSR 2021/ 20.64)20.64.1) 100 mm i/d |
| 550 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (HSR 2021/ 20.68)20.68.1) Up to 300mm dia |
| 551 | Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 50. 00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) (HSR 20.123.15) Discharge Capacity 1100 (LPM) Power capacity 20 (BHP) |
| 552 | Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 50. 00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) (HSR 20.123.21)Discharge Capacity 1400 (LPM) Power capacity 25 (BHP) |
| 553 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. HSR(22.87.3) 25 mm nominal outer dia Pipes |
| 554 | 22.87.4) 32 mm dia nominal bore |
| 555 | 22.87.5) 40 mm dia nominal bore |
| 556 | 22.87.6) 50 mm dia nominal bore |
| 557 | 22.87.7) 65 mm dia nominal bore |
| 558 | 22.87.8) 75 mm dia nominal bore |
| 559 | 22.87.9) 100 mm dia nominal bore |
| 560 | Providing and fixing gun metal gate valve with C.I. wheel/ handle of approved quality (screwed end): (HSR2021/ 22.98)22.98.1) 25 mm nominal bore |
| 561 | 22.98.3) 32 mm nominal bore |
| 562 | 22.98.4) 40 mm nominal bore |
| 563 | 22.98.5) 50 mm nominal bore |
| 564 | 22.98.6) 65 mm nominal bore |
| 565 | 22.98.7) 80 mm nominal bore |
| 566 | Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): (HSR 22.162) |
| 567 | 100 mm diameter Class I( 22.162.1.1) |
| 568 | 150 mm diameter Class I( 22.162.3.1) |
| 569 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1 :4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 160 mm deep ( inside) with chained lid and RCC top slab 1 :2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stoneaggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neatcement complete as per standard design :22.174.1 With common burnt clay non-modular bricks of class designation 7.5 (HSR 22.174) |
| 570 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1 :4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1: 2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 22.175.1 With common burnt clay non-modular bricks of class designation 7.5 (HSR 22.175) |
| 571 | Supply and installation of drip irrigation lines with external emitters/ m icro-spri nklers/bubblers (HSR 26.70.6) Installation of adjustable flow bubbler with all accessories complete as per BIS standard specifications |
| 572 | EXTERNAL SEWERAGE SYSTEM (HSR PART) |
| 573 | Earth work in excavation by mechanical means (Hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting outand disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. (HSR 4.12.1) All kinds of soil |
| 574 | Excavating trenches of required width for pipes, cables, etcincluding excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: (HSR 2021/ 4.16) 4.16.1.3 Pipes, cables etc. exceeding 300 mm metre dia but not exceeding 600 mm |
| 575 | Extra for excavating trenches for pipes, cables etc. in all kinds of metresoil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). (HSR 4.17) |
| 576 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 6.1.1) 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 cum graded stone aggregate 20 mm nominal size) |
| 577 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1) 6.1.3) 1 :2 :4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 gradedstone aggregate 40 mm nominal size) |
| 578 | 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 579 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth levelThermo-Mechanically Treated bars of grade Fe-500D kg (HSR 6.33.6)or more. |
| 580 | Brick work with common burnt clay non-modular bricks of class designation 12.50 in foundation and plinth in: 7.21.1 Cement mortar 1:4(1 cement: 4 coarse sand) (HSR 7.21.1) (Derived) |
| 581 | Neat cement punning. (HSR 11.3) |
| 582 | 12 mm cement plaster of mix : 11.5.3) 1:4 (1 Cement : 4 fine sand)(HSR 11.5.3) |
| 583 | Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening (HSR 21.93.1) |
| 584 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: (HSR 2021/ 22.163) |
| 585 | 2.163.3) 200 mm diameter |
| 586 | 22.163.4) 250 mm diameter |
| 587 | 22.163.5) 300 mm diameter |
| 588 | Providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with IS : 5382 and testing of SPIGOT AND SOCKETTED RCC, NP2 MARKED WITH IS : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the Engineer - in -charge (HSR 2021/ 20.62)20.62.2) 250 mm i/d |
| 589 | 20.62.3) 300 mm i/d |
| 590 | 20.62.4) 350 mm i/d |
| 591 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside with heavy duty SFRC cover complete as per standard design. (HSR 2021/ 21.84) |
| 592 | 21.84.3) Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame single seal pattern SFRC with heavy duty |
| 593 | Extra for every 0.30 metre depth of Inspection chamber(HSR 2021/ 21.85)21.85.3) 600 mm x 900 mm inside |
| 594 | Providing M.S. foot rests including fixing in manholes with 20x20x1 O cm cement concrete blocks 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : (HSR 22.198) 22.198.1) With 20x20 mm square bar |
| 595 | RAIN WATER HARVESTING SYSTEM (HSR PART) |
| 596 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m (HSR2021/4.8)4.8.1) All kinds of soil |
| 597 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (HSR 2021/4.14)4.14.1) All kinds of soil. |
| 598 | Extra for every additional lift of 1.5 m or part thereof inexcavation / banking excavated or stacked materials (HSR 2021/ 4.31)4.31.1) All kinds of soil |
| 599 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (HSR2021/ 4.32) |
| 600 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1)6.1.2) 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) |
| 601 | 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 602 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in:HSR2021(7.21)7.21.1) Cement mortar 1:4 (1 cement: 4 coarse sand) (Derived Rate)+ (7.40 - 7.39) |
| 603 | 12 mm cement plaster of mix (HSR 2021/ 11.5)11.5.2) 1 :3 (1 cement: 3 fine sand) |
| 604 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, up to 90 metredepth below ground level. (HSR2021/ 33.6)33.6.1) All types of soil33.6.1.1) 300 mm dia |
| 605 | Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (HSR2021/33.8)33.8.2) 150 mm nominal size dia |
| 606 | Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (HSR 2021/33.9)33.9.2) 150 mm nominal size dia |
| 607 | Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness,for all leads & lifts, all complete as per direction of Engineer-incharge (HSR 2021/33.12) |
| 608 | Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (HSR 2021/ 33.14) |
| 609 | Gravel packing in tube well construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge (HSR2021/33.15) |
| 610 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\"\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge (HSR 2021/ 33.19) |
| 611 | RAIN WATER (NS PART) |
| 612 | Providing and fixing of non woven Geotextile having thickness of 400 gsm, having minimun tear Strength of 250 ASTM D4533, width wise at least 215 ASTM D4533 having puncture strength of 1550 plus as per ASTM D6241 Having elongation at Break % of 57 plus as per ASTM D 4595 in Two layers, made out of long fibers to hold the modules including cutting, sizing, heat welding and needle punched for high porosity and proper percolation. Complete as per entire satisfaction of engineer-in-chargeFormula :2X (2(LxB)+2(BxH)+2(HxL)) Layers+25% overlap (ns) (NS) |
| 613 | Providing & Fixing of Co-polymer based rainwater harvesting structure including supply of crosswave of size 494 mm x 494 mm x220mm with minimum void ratio of 94.7% having a weight of 1.8 kgand spacers having size of 988 mm x 240 mm x 25 mm having a weightof 0.8 kg of approved make and arranging the same in as directed by the engineer-in-charge and in complete accordance to the design, drawings as per entire satisfaction of Engineer -in-charge (NS) |
| 614 | Providing and fixing of CGWB/GRIHA approved Pure Rain Filters with extensions as required desilting suspended solid catcher made out of FRP and strainers including bucket of SS 304 grade with long fiber foam size around 600mm dia, filtration capacity 40 kiloliters per hour with porosity of 600 microns filter complete in accordance to the desgin , drawing and specification complete as per entire satisfaction of Engineer-in-Charge. Size of FIlter 780 mm Dia, 800 mm height (NS) |
| 615 | Supplying and fixing of 300 mm supreme UPVC Pipe 315mm O/D conforming toI.S 4985-81 Dated-12/12/2013,I.S marked having 6 KG per centimeter square Pressure i.e. excavation, refilling for providing proper loop from catch pit to filter /filter to cross wave as per entire satisfaction of Engineer in charge.(from chamber to Filter to tank) (NS) |
| 616 | Providing and Fixing of Medium Duty SFRC cover of required size with perforated slots over gully chamber. All as per requirmentsand direction of Engineer-in-charge. (NS) |
| 617 | EXTERNAL DRAIN CHANNEL (NS) |
| 618 | Constructing RCC precast perforated RCC. slab covered Drain with 150mm thick RCC 1.1.5.3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size) wallincluding earth excavation, 75mm thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) and 100mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: |
| 619 | Drain 300 wide average.Depth 500cm with R.C.C. Slab |
| 620 | Drain 450 wide average.Depth 750cm with R.C.C. Slab |
| 621 | Drain 600 wide average.Depth 1200cm with R.C.C. Slab |
| 622 | Drain 750 wide average.Depth 1500cm with R.C.C. Slab |
| 623 | TUBEWELL (HSR PART) |
| 624 | Providing GI pipes class B marked with IS: 1239 in 3.05 m length, their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( \"W make), rubber gaskets, lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. (HSR 2021/ 20.54)20.54.3) 80 mm i/d |
| 625 | Supplying, erection, testing and commissioning of Horizontal motorpumping set for clear water having head 40. 00 m as per the indicatedrequirements of discharge in LPM and power capacity in BHPMake: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) (HSR 2021/20.121)20.121.26) Discharge capacity 1650 (LPM), Power capacity 25 HP |
| 626 | Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): (HSR 2021/22.162)22.162.1) 100 mm diameter22.162.1.1) Class I |
| 627 | 22.162.3) 150 mm diameter22.162.3.1) Class I |
| 628 | Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (HSR 2021/ 33.8)33.8.3) 200 mm nominal size dia |
| 629 | Supplying, assembling, lowering and fixing in vertical position inbore well Unplasticised PVC medium well screen (RMS) pipeswith ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (HSR 2021/ 33.9) 33.9.3) 200 mm nominal size dia |
| 630 | Gravel packing in tube well construction in accordance with IS: cum 72 1234 1306 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (HSR2021/ 33.15) |
| 631 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe,removable as per requirement, all complete for bore well of: (HSR 2021 / 33.16)33.16.3) 200 mm dia |
| 632 | Providing and fixing M.S. clamp of required dia to the top ofcasing/ housing pipe of tube well as per IS: 2800 (part I),including necessary bolts & nuts of required size complete (HSR 2021 / 33.17)33.17.3) 200 mm clamp |
| 633 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). (HSR 2021/ 33.18)33.18.3) 200 mm dia |
| 634 | Development of tube well in accordance with IS : 2800 (part I)and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\"\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge (HSR 2021 /33.19) |
| 635 | TUBEWELL (NS PART) |
| 636 | Drilling 685.8 mm dia bore by reverse rotatry/ DTH/ Precussion RIG according to ISI specifications no. ISI 2800-1991 as amended up to date in all classess of soil. Boulder upto 125 mm dia except rockey, includes the cost of all consumbles stores fuiel oil soil stablishing material and transportation of rig and other accessorries to the site of the work & back, drillling upto the 100 mm depth from ground level. |
| 637 | P/I of electrically driven diaphragm metering dozing pump for injecting chlorine solution into the pipe line of AMS or any other reputed make complete in all respects including making connection to the pipe line. |
| 638 | SEWAGE TREATMENT PLANT (MOVING BED BIO REACTOR TECHNOLOGY) |
| 639 | Design, supplying, installing, testing & commissioning of Sewage Treatment Plant of Capacity 500 KLDfor the following duty: STP MBBR Tank Is in MSFRP Construction i/c operation and maintenance of STP upto 36 monthswill be in the scope of the Agency |
| 640 | Note: Contractor shall ensure submission of detailed GFC drawings(Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the STP for the full capacity the treated water will be used in plusing system in toilet norms should be followed accordingly same duly approved and vetted by public health consultant and approved by Engineer |
| 641 | Nature of effluent - Domestic Sewage from toilet, kitchen waste water shall be discharged into the STP. Design to take consideration of same. |
| 642 | Daily average flow - 500 Cum / Day |
| 643 | Domestic Sewage Characterstics |
| 644 | pH - 6 – 8.5 |
| 645 | BOD5 - 250 – 350 Mg/L |
| 646 | S. Solids - 200 – 450 Mg/L |
| 647 | COD - 500 – 600 Mg/L |
| 648 | Oil & Grease - 50 Mg / L |
| 649 | Treated Sewage Discharge standard after UF treatment |
| 650 | pH - 6.5 – 8.5 |
| 651 | BOD5 - Less than 5 Mg/L |
| 652 | S. Solids - Less than 5 Mg/L |
| 653 | COD - Less than30 Mg/L |
| 654 | Oil & Grease -Nil |
| 655 | Sewage treatment plant shall include the following items: |
| 656 | Grit chamber |
| 657 | Screen Chamber v |
| 658 | Sewageequalization tank / sump |
| 659 | Pre Fabricated MSFRP MBBR Reactor Tankwith Tube settler- MSFRP Tank for 250 KLD X 2Nos |
| 660 | Supernatant Tank |
| 661 | Sludge Holding Tank |
| 662 | UF Unit |
| 663 | Filtration through MGF & ACF |
| 664 | UV Unit |
| 665 | Air Blowers, Pumps & equipment |
| 666 | Piping, valves etc |
| 667 | Electrical Panel & Cabling |
| 668 | Supply, installation, testing & commissioning of 2 Nos, 800mm x 1000mm Stainless Steel Perforated, Coarse Type, corrugated Screen with SS 304 Sheet , with suitable garbage lifting arrangement. |
| 669 | Supply, installation, testing & commissioning of Oil Skimmer of suitable size of 100mm with minimum of 1200 liquid depth |
| 670 | Supply, installation, testing & commissioning of Displacer Type Level Switch for automatic operation of the system with high / low level alarm complete with auxillary NO/NC contacts for each tank. Make; Relipower/Status/Tecnika |
| 671 | Supply, installation, testing & commissioning of Non Clogging Type Submersible Pumps complete with all accessories, motor of required capacity. Delivery header with isolation valve, level controller (with wiring) to control the level of sump automatically. Provison shall be kept to run both pumps simultaneously in case of emergency. Pumps shall have following duty: |
| 672 | EQT Submersible Sump Pumps for EQT- 2nos. (1 working & 1 standby) =1 Set :- |
| 673 | Flow rate (each)=22 m3/hr |
| 674 | Head = 8-10 Mtr |
| 675 | MOC : CI |
| 676 | (Solid handling size for this pump shall be 15-20mm).Make: Wilo/Kirloskar/Lubi |
| 677 | STP MECHANISM |
| 678 | Supply, installation, testing and commissioning of MBBR Tanks in Mild Steel 6 mm sheet with 3 mm FRP Coated (13 X2.25 X2.25) m LxBxH ,MBBR media, and TubeSettler settling media to be installed inSettling Tank along with suitable sludge removal arrangementMBBRSystem to be in two reactors and 5 internal partitions - Inlet Chamber, Aeration One, Aeration Two, TubeSettler, Chlorine Contact tank. One MBBR MSFRP Tank Suitable for 250 KLD |
| 679 | Sludge disposal pump -2 Nos(1 working+ 1 Standby) =1 Set |
| 680 | Flow rate (each)=15m3/hr |
| 681 | Head =10 Mtr |
| 682 | MOC : CI |
| 683 | (Solid handling size for this pump shall be 8 mm). Make : Kirloskar |
| 684 | Plant Room SumpPump -2 Nos(1 working+ 1 Standby)=1 Set |
| 685 | Flow rate= 25m3/hr |
| 686 | Head = 10-12 Mts |
| 687 | MOC : SS |
| 688 | (Solid handling size for this pump shall be 10- 15 mm). Make: Wilo/Kirloskar/Lubi |
| 689 | Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor. |
| 690 | Air DiffusionSystemshall include the following: |
| 691 | 2 Nos. Twin Type Rotary Air Blowers (1W + 1S) capable of delivering 400 cum/hr of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Make : Everest/Kay/Beta/A1 Blowers |
| 692 | Air piping shall comprise of pipes S.S. 304 droppers/laterals with M.S C ClassHeader complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good. Contactor to submit detailed P & I indicating their proposal |
| 693 | Non Clog Type Air Dispersion System capable of handling 8-10 cfm of air with oxygen transfer efficiency of3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers) Make :Rehau/water2 People /MM Aqua /AN Engineers |
| 694 | Note: Air dispersion system shall be provided for Equvalization Tank, Aeration MBBR Tanks and Sludge Holding Tank. |
| 695 | Providing and fixing All Piping (as described below) and isolation control valves for making the system complete. |
| 696 | SS 304: Submerged air piping |
| 697 | MS Epoxy : Air piping & pumped effluent riser (non-submerged) |
| 698 | S.S. 304 & C. Class M.S. Piping : Pumped effluent (submerged) & tank overflow pipe line |
| 699 | M.S (C. Class): Interconnecting pipe line after delivery header of pump/ filter |
| 700 | Supply, installing, testing & commissioning of Ultravoilet Dis-Infection Unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 – 20 mA output. |
| 701 | The UV Unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with UV monitoring system and UV monitoring readout panel. The UV Dosage should be > 60,000 uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit. Make : Alfa/Sukrut |
| 702 | Flow Rate : 25 m3/hr |
| 703 | Supply, installation, testing & commissioning of Chlorine dosing system with dosing solution and a200 ltrs HDPE tank with 0-12 lph Dosing Pump. Make-Seko/Milton Roy/Asia LMI |
| 704 | Supply, installation, testing and commissioning of package type Ultra Filtration System of suitable capacity for STP of 500 KLD(24 m3/hr) capacity complete with pre-treatment system-comprising of UF hollow fibre membranes Out to In Filtration Type. UF Feed Pump -2 Nos. UF Back Wash Pump -2 Nos (Make; Kirloskar). Chemical Dosings, , Piping, Valves, Pressure Gauges, etc complete. The Unit shall have all interlocking for safe operation of Plant. The Unit shall have Skid Mounted Electrical Panel complete with required Starters and shall also have all Annuanciation and Controls. Flow Meter & Totalizer shall also be provided. PLC with Input/Output Modules shall be integrated with all Auto Equipments/ Valves in Auto Mode. The Piping shall be GI C. Class. Membrane - Make : GE/Deerfos/Toray/oltremare |
| 705 | Supplying, installing, testing & commissioning of Horizontal Centrifugal Monobloc Filter Feed water Pumps CI Casing & Impeller along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve.of approved design,The pump shall be suitable for 415±10% volts 3 phase AC supply. Make : Kirloskar |
| 706 | Capacity : 25m3/hr |
| 707 | Head : 30 M |
| 708 | RPM : 2900 |
| 709 | (1 working+ 1 Standby) |
| 710 | (Filter Feed Pumps)=1 Set |
| 711 | Capacity : 10 m3/hr |
| 712 | Head : 30 M |
| 713 | RPM : 2900 |
| 714 | (1 working+ 1 Standby) =1 Set |
| 715 | ( Irrigation Pumps) |
| 716 | Capacity : 20m3/hr |
| 717 | Head : 90 M |
| 718 | RPM : 2900 |
| 719 | (1 working+ 1 Standby)=1 Set |
| 720 | (Flushing Water Transfer Pumps) |
| 721 | Supply, Installation, testing and commissioning of Vertical MultigradeSand Filter fabricated out of 6mm thickM.S. plate as per IS Code with 8mm dishedends, manholesand side holes with cover, under drains, supporting legs flanged piping, valves , strainer plate of 10mm thickness,etc. complete including frontal piping and intially charge with media like pebbles, gravels, sand etc. It shall be internally coated with red iron oxide primer and two coats of epoxy paint and externally with red iron oxideprimer and two coats of approved synthetic enamel paint. Filter media shall be included in cost and shall include standard fittings like pressure gauges on inlet and outlet, sampling cocks,air vent , bolts, nuts and rubber gasket etc. complete. |
| 722 | Capacity- 25M3 / Hr |
| 723 | Filtration rate- 15M³/M²/hr |
| 724 | Height of shell - 1.5 mtrs |
| 725 | Max. operating pressure - 3.5kg/sq.cm. |
| 726 | Test pressure - 5.5kg/sq.cm. |
| 727 | ShellThickness -6mm |
| 728 | Dished ends Thickness-8mm |
| 729 | dia of filter - 1.4 mtrs. |
| 730 | Multi grade Sand Media (minimum) -2000kg |
| 731 | Supply, installation, testing and commissioning of Vertical Activated CarbonFilter fabricated out of 6mm thickM.S. plate as per IS Code with 8mm dishedends, manholesand side holes with cover, under drains, supporting legs flanged piping, valves, strainer plate of 10 mm thickness ,etc. complete including frontal piping and intially charge with activated carbon media. It shall be internally coated with red iron oxide primer and two coats of epoxy paint and externally with red iron oxideprimer and two coats of approved synthetic enamel paint. Filter media shall be included in cost and shall include standard fittings like pressure gauges on inlet and outlet, sampling cocks,,air vent , bolts, nuts and rubber gasket etc. complete. |
| 732 | Capacity- 25 M3 / Hr |
| 733 | Filtration rate- 15M³/M²/hr |
| 734 | Height of shell - 1.5 mtrs |
| 735 | Max. operating pressure - 3.5kg/sq.cm. |
| 736 | Test pressure - 5.5kg/sq.cm. |
| 737 | ShellThickness -6mm |
| 738 | Dished ends Thickness-8mm |
| 739 | dia of filter - 1.5 mtrs. |
| 740 | Activated Carbon Media(minimum) - 700 kg |
| 741 | Supply, installation, testing & commissioningof Hydraulic Filter Press of Suitable Capacity 36\" x 36\" x 36\" plates with CI frame, PP plateswith filter clothinterconnecting piping and poly dosing system complete. Make: Sachin/Pharmatech/DFP/Water 2 People |
| 742 | Supply, installation, testing & commissioning of positive displacement type Screw Slurry Pump with MS casing, SS-strator with internal rubber lining, gland packing seal, solid handling capacity upto 7 to 10% of the effective percentage of sludge and direct drive with motor.Make-Roto/UT/Rotomac |
| 743 | Filter Press Feed Screw Pump |
| 744 | Capacity : 5 m3/hr |
| 745 | Head : 40 mtrs. (1W+ 1S) |
| 746 | Supply, installation, testing & commissioning of Electromegnatic Type Flow Meter having acrylic body coupled with MS Flanges, of suitable capacity for 25 m3/h plant. Size : 4 \" on iNCOMING and on dISCHARGE Pipe Line (Make:- Electronet/ Aster/Adept) |
| 747 | Electrical Panel for Sewage Treatment Plant |
| 748 | Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 1 No. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. |
| 749 | Incoming |
| 750 | 125 amps TPN MCCB with the following accessories: |
| 751 | a. 0-415 volts 96 x 96 mm square voltmeter with selector switch shall be protected by2 amps TP MCB.1 Set |
| 752 | b. 0-500 amps 96 x 96 mm square ammeter with selector switch and 315/5 amps 10 VA CL:1 CTs.1 Set |
| 753 | c. Phase indicating lamps shall be protected by 2 amp SP MCB-3 Set |
| 754 | d. Digital Energy Meter |
| 755 | Note : Vendor can be use Singal Digital Meter for Volt/Ammeter/Energy |
| 756 | Bus Bar |
| 757 | 200 amps TPN (15 KA) aluminium bus bar with heat shrinkable insulation sleeves |
| 758 | Outgoings |
| 759 | a. 2 No. suitable rating MPCB for 1.5-2.2 KW direct on line starterand outgoing feeder to air blowers. Each compartment shall contain auto/manual selector switch & Timer andindicating lamps with MCB’s for ‘ON/OFF/TRIP\" status of motor. |
| 760 | b. 2 No. suitable rating MPCB for 7.5-10 KW direct on line starterand outgoing feeder to air blowers. Each compartment shall contain auto/manual selector switch & Timer andindicating lamps with MCB’s for ‘ON/OFF/TRIP\" status of motor. |
| 761 | c. 2 No. suitable rating MPCB for 1.1-1.5 KW direct on line starter and outgoing feeders to sludge disposal pump (including 1 no. standby). Compartment shall containindicating lamps with MCB’s for‘ON/OFF/TRIP’ status of motor. |
| 762 | d. 2 No. suitable rating MPCB for 2.2 -3.7 KW direct on line starterand outgoing feeder to air blowers. Each compartment shall contain auto/manual selector switch & Timer andindicating lamps with MCB’s for ‘ON/OFF/TRIP\" status of motor. |
| 763 | e. 2 No. suitable rating StarDelta for 10-15 KW direct on line starterand outgoing feeders to Flushing Water Transfer pumpshall contain auto/manual selector switch & Timer and indicating lamps with MCB for‘ON/OFF/TRIP’ status of motor. |
| 764 | f. 2 No. suitable rating MPCB for 2.2-3.7 KW direct on line starterand outgoing feeder to air blowers. Each compartment shall contain auto/manual selector switch & Timer andindicating lamps with MCB’s for ‘ON/OFF/TRIP\" status of motor. |
| 765 | g. 2 No.suitable rating MPCB for 1-1.5 KW direct on line starter and outgoing feeders to Filter press.indicating lamps with MCB’s for‘ON/OFF/TRIP’ status of motor. |
| 766 | h. 2 No. suitable rating MPCB for 2.2 KW direct on line starterand outgoing feeder to air blowers. Each compartment shall contain auto/manual selector switch & Timer andindicating lamps with MCB’s for ‘ON/OFF/TRIP\" status of motor. |
| 767 | 1.1 No. suitable rating MPCB for No. 20-25 KW star delta starter and outgoing feeders to UF SKID. Each compartment shall contain auto/manual selector switch and indicating lamps with MCB for ‘ON / OFF / TRIP’ status of motor. |
| 768 | k. Spare MCB’s of following capacities: |
| 769 | i. 16 amps TPN MCB’s2 Nos. |
| 770 | ii 40 amps TPN MCB’s1 Nos. |
| 771 | Note: All MCCB\"s to be suitable for motor duty and shall be of 10-15 KA breaking capacity. |
| 772 | Make of MCB/MCCB/MPCB/Contractor/Relay - L&T /Schinder/ABB |
| 773 | MCC –1 for STP as described above |
| 774 | Supply Installation & Commissioning ,installing, testing& commissioningof Cables , Conector, Cable Trays, to make Electrical Installation Complete. |
| 775 | a) Cable |
| 776 | Type -2-4 core Copper Flexible |
| 777 | Capacity - As per the control panel and machines to connected. |
| 778 | Size of cable - 1Sqmm - 4 sqmm |
| 779 | Make : Finolax/Polycab/National/LAPP |
| 780 | b) Cable Tray |
| 781 | Qty - As required |
| 782 | Type - Slotted GI |
| 783 | Size - 2\" x 4\" x 6\" or as required. |
| 784 | c) Cable Tray Support |
| 785 | Quantity - As per site requirment of approved quality. |
| 786 | EFFLUENT TREATMENT PLANT : 150 KLD CAPACITY |
| 787 | Preliminary Works |
| 788 | All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under “Basis of Design” in the specifications. Type of equipment, material specification, methods of installation and testing and type of control shall be in accordance with the specifications, approved shop drawings and the relevant Indian Standards, however capacity of each component and their quantities shall be such as to fulfill the below mentioned requirements.i/c operation and maintenance of STP upto 36 monthswill be in the scope of the Agency |
| 789 | The unit rate for all equipment or materials shall include cost in INDIAN RUPEES (INR) for all materials, fixing materials, accessories, appliances tools, plants, equipment, transport, labour and incidentals required in preparation for and in the full and entire execution as per Specifications and Drawings including all taxes and duties and also including forwarding, freight, insurance and transport into Contractor’s store at site, storage, installation, testing, balancing, commissioning and other works required or called for in item. |
| 790 | In the event of conflict between Bill of Quantities and other documents including the Specifications, the most stringent shall apply. The interpretation of the Architect / Consultant /Project Manager shall be final and binding. |
| 791 | All requirements of Specifications, whether such requirements are mentioned in the item or not shall be met. The Specifications and Drawings where available, are to be read as complimentary to and part of the Bill of Quantities and any work called for in one shall be taken as required for all. |
| 792 | The contractor shall include for making all the opening in slabs, beams, walls etc. as required for his work. However, the contractor can coordinate with civil work to provide necessary sleeves. All hot and cold water supply pipes crossing masonry walls of toilets shall be provided with GI pipe sleeves. The annular space between the pipe and sleeve shall be filled up with glass wool in between and fire proof sealent on either end after testing. All openings shall be closed using water proofing compound or as specified by Project Manager. |
| 793 | The work shall be carried out in conformity with the plumbing drawings and within the requirements of architectural, HVAC, electrical structural and other specialized services drawings. The contractor shall cooperate with all trades and agencies working on the site. He shall make provision for hangers, sleeves, structural openings and other requirements well in advance to prevent hold up of progress of the construction schedule. All supports to the civil structure shall be provided with anchor fastners. |
| 794 | On award of the work, contractor shall submit a schedule of construction in the form of a PERT chart or BAR chart for approval of the Project Manager. |
| 795 | Contractor must submit for approval shop drawings, that detail pipe routing and levels, showing location of other services at crossings etc., cable runs, route cable trays and all allied works and must be fully coordinated with other services, before execution of the works. All shop drawings will be made on Autocad and coloured prints has to be produced for site work. |
| 796 | The contractor shall, from time to time, clear away all debris and excess materials accumulated at the site failing which the same shall be done by Project Manager at contractor’s risk and cost and cost of clean up shall be deducted from the contractors prorata bill. After the fixtures, equipment and appliances have been installed and commissioned, contractor shall cleanup the same and remove all plaster, paints, stains, stickers and other foreign matter or discoloration leaving the same in a ready to use condition.Contractor shall demolish all stores, remove all surplus materials and leave the site in a broom clean condition |
| 797 | The contractor shall submit detailed GA drawings, flow diagrams, equipment list, power load requirement. |
| 798 | The contractor must do and provide in detail, design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design |
| 799 | Contractor shall ensure submission of GOOD FOR CONSTRUCTION\" stage architectural, structural, construction, electrical, mechanical and piping drawing, detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for main components and additional components such as inserts, puddle flanges, vent pipes etc. for approval. |
| 800 | Design, Supply, Fabrication, installation, testing and commisioning ofeffluent treatment plant with effluent handling capacity 150 m3 per day. The entire plant will be constructed in MS (FRP coated, min. 3 mm). The ETP shall be designed as water retaining structures, with necessary chemical dosing as required by the manufacturer\"s design. All the equipment, piping, pumps, air blowers and electrical panel to be housed in the ETP skid including M.S. puddle flange (Galvanised), inlet, outlet, overflow, vent, moving ladders & railing.The Plant shall be complete with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level and other controls. The cost will also include any consequential civil work including making foundations for the structure, pumps, blowers etc. It should be complete as per manufacturer\"s specifications & as directed by Engineer-in-charge. |
| 801 | Effluent from Labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same. |
| 802 | Daily average flow: 60 Cum/Day |
| 803 | PH: 5.5 - 9.0 |
| 804 | BOD: 250 - 600 mg/l |
| 805 | S. Solids : 200 - 650 Mg/l |
| 806 | COD: 600 - 1200 mg/l |
| 807 | Oil & Grease: 50-140 mg/L |
| 808 | Effluent discharge standard after treatment :- |
| 809 | PH :7.0 - 8.5 |
| 810 | S. Solids :Less than 150 mg/l |
| 811 | COD:Less than 50mg/l |
| 812 | Oil & Grease:Less than 5 mg/l |
| 813 | BOD:Less than 30 Mg/L |
| 814 | The ETP shall consist of following units but not limited to these unit as may be required by the manufacturer\"s design. MS PVC coated rungs in all tanks & Platform for maintenance etc. complete as required. |
| 815 | SS Perforated bar screen having provision for chain lifting arrangement etc. complete as required. |
| 816 | Supply, installation, testing & commissioning of Flash MixerQuantity01 numberDrive 2 HP motor with gear Capacity10 m3/HourMOC: MS with FRP lining 1.1 mminside |
| 817 | Supply, installation, testing & commissioning of FlocculatorQuantity01 number Drive 1.5HP motor with gear Capacity10 m3/HourMOC: MS with FRP lining 1.1 mm inside |
| 818 | Supply, installation, testing & commissioning of Tube SettlerQuantity01 number MOC MS with FRP lining 1.1 mm insideCapacity15KL/Hour |
| 819 | Supply, installation, testing & commissioning of Media in Tube Settler Quantity 5.0 m3 (APPROX.)Type Corrugated MOC PVC |
| 820 | Supply, installation, testing & commissioning ofMBBR |
| 821 | Quantity02 number |
| 822 | With Air Dispression System |
| 823 | Capacity15 KLeachTank |
| 824 | MOC: MS with FRP lining 1.1 mm inside |
| 825 | Supply, installation, testing & commissioning of SecondaryTube SettlerQuantity01 number MOC MS with FRP lining 1.1 mm insideCapacity15KL/Hour |
| 826 | Air DiffusionSystemshall include the following: |
| 827 | 2 Nos. Twin Type Rotary Air Blowers (1W + 1S) capable of delivering 150 cum/hr of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Make : Everest/Kay/Beta/A1 Blowers |
| 828 | Air piping shall comprise of pipes S.S. 304 droppers/laterals with M.S C ClassHeader complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good. Contactor to submit detailed P & I indicating their proposal |
| 829 | Non Clog Type Air Dispersion System capable of handling 8-10 cfm of air with oxygen transfer efficiency of3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers) Make :Rehau/water2 People /MM Aqua /AN Engineers |
| 830 | Note: Air dispersion system shall be provided for Equvalization Tank, Aeration MBBR Tanks |
| 831 | Providing and fixing All Piping (as described below) and isolation control valves for making the system complete. |
| 832 | SS 304: Submerged air piping |
| 833 | MS Epoxy : Air piping & pumped effluent riser (non-submerged) |
| 834 | S.S. 304 & C. Class M.S. Piping : Pumped effluent (submerged) & tank overflow pipe line |
| 835 | M.S (C. Class): Interconnecting pipe line after delivery header of pump/ filter |
| 836 | Supply, installation, testing & commissioning of Electromegnatic Type Flow Meter having acrylic body coupled with MS Flanges, of suitable capacity for 25 m3/h plant. Size : 2.5 \" on iNCOMING and on dISCHARGE Pipe Line (Make:- Electronet/ Aster/Adept) |
| 837 | Providing and fixing all instrumentation eg. Pressure guages, level controllers, sensors, rotametres for air, water etc. for making the system complete. |
| 838 | Supply, installation, testing and commissioning of continuous duty submersible (solid handling 20 mm)centrifugal single stage single suction non-clogging mono block pumps with stator frame of cast iron casing, bronze or equivalent non -clogging impeller, high tensile stainless steel shaft complete with 3 phase tottaly water & dust proof motor suitable for operation 400/440 volts, 3 phase, 50 Hz,2900 rpm, class -Fisulation, IP 68 protection as per IS 2147 of electric motor with efficiency class of min. IE-3 (tested for leak proof operation) with all necessary protection and double mechanical seal, gland packed etc. complete with all ancillaries including float type level controllers, float switch, electrical control panels fabricated from 14 gauge CRCA sheet volt meter ammeter with selector switch, TPMCB, 5 VA CL : CTs, phase indicating lamps protected by 2 amp SP MCB, DOL starter of suitable capacity (H.P), necessary wiring, cable alleys, nclusive of all terminations,earthing, interlocking, starter with Automatic float type level controller, providion of high level alarm, sequence timer, potential free contact to starter for connection to BAS, both pumps may run simultaneously at pre determind level. (1Working + 1Standby). The submersible pump shall be protected for dry run operation & with suitable foundation. The pump shall be suitable for auto/ manual operation.Vendor to submit proposed pump model with duty curve.The entire work shall be complete as per specifications & as per directions of E-I-C. |
| 839 | Capacity : 8 M3/hr @ Discharge Head 10 M head (2 Nos.-1 Working + 1 Standby) From effulent tank to MSFRP etp tank |
| 840 | Mono block centrifugal Sludge Disposal Pumps Capacity : 5 M3/hr @ Discharge Head 10 M head (2 Nos. - One working & one stand by) From Effluent tank to Sludge Holding tank of STP |
| 841 | Cost shall be inclusive of PVCflexible Hose pipe ( for piping submerged in effluent) with M S epoxypiping (for piping non-submerged in effluent) |
| 842 | Providing and fixing lime/alum/polyelectrolyte dosing system consisting of ABSdosing pump (0-6 lph) with 100 lit HDPE tank including all piping from the dozer to the reaction tank etc. complete in all respects.3 nos. (alum/lime/polyeelctrolyte) in flash mixer & 1 no. in tube settler (alum) |
| 843 | Supplying, installing, testing and commissioning of high speed Agitator of SS 304 and Flocculator complete with single phase motor for flash mixer. |
| 844 | Constructing Grease Trap with belt type oil skimmer of suitable size of minimum 1200mm liquid depth in brick work of class 75 with cement mortar (1:6), inside plastering 16 mm thick with cement mortar 1:3 with floating coat of neat cement and rough plaster on outside. Including SS bucket as per detail to collect the grease. RCC top slab with 500 mm dia medium duty manhole covers with frame. It should be complete with belt type oil & grease skimmer. |
| 845 | Electrical Installation |
| 846 | Supply, Installation, Testing and Commissioning of ETPPanel cubicle type, made out of 14 swg CRCA sheet steel,totally enclosed, IP-52, protection freestanding, floor mounting, dust and vermin proof ,indoor, compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415v, 50 Hz AC supply system with busbars extensible on both sides, interconnections with suitable size of copper leads/ solid aluminium strips, all MCCB\"s shall be provided with O/C & S/C releases all as shown on drawing including supply & installation,earthing complete as required and as per specifications: |
| 847 | Incoming |
| 848 | 100 amps TP+M MCCB with the following accessories: |
| 849 | 0-500 volts 96 x 96 mm square voltmeter with selector switch protected by 2 amps TP MCB.1 Set |
| 850 | 0-200 amps 96 x 96 mm square ammeter with selector switch and 200/5 amps 10 VA CL:1 CTs.1 Set |
| 851 | Phase indicating lamps protected by 2 amp SP MCB 3 Sets |
| 852 | Bus Bar |
| 853 | 150 amps TPN (25 KA) aluminium bus bar with heat shrinkable insulation sleeves. |
| 854 | Outgoings |
| 855 | For Submersible Raw Water Transfer pumps (1 Working & 1 Standby)- 2 No. 4.0 - 6.3 amps TP MPCB with 2 nos. 2 H.P DOL Starter, overload relay, ammeter with single CT, start/stop push button, auto / manual selector swtich, single phase preventor RELAY and indicating lamps with MCB for ON / OFF / TRIP status of motor. |
| 856 | For Sludge Disposal pumps (1 Working & 1 Standby)- 2 No.4.0 - 6.3 amps TP MPCB with 2 nos. 2 HP DOL Starter, overload relay, ammeter with single CT, start/stop push button, auto / manual selector swtich, single phase preventor RELAY and indicating lamps with MCB for ON / OFF / TRIP status of motor. |
| 857 | For Lighting & Power inside WTP plant room:-1 no. 63 Amp 4P (10 KA, C curve) MCB, OVERLOAD RELAY, SHORT CIRCUIT RELAY |
| 858 | All Incoming/ Outgoing Feeders shall be with suitable size switchgear & rating of starter alongwith Busbar sizingto meet the functional requirement ofPump & other Equipment. Nothing extra will be paid in this regard. |
| 859 | Spare MCB’s of following capacities to be provided in this panel as mentioned below:- |
| 860 | 63 Amp 4P MCB - 1 No. |
| 861 | 9-15 Amp TPMPCB’s 1 No. |
| 862 | 23-32 Amp TPMPCB’s 1 No. |
| 863 | Complete Item as mentioned above |
| 864 | Electric cable |
| 865 | Supply, installation, testing & commissioning of XLPE insulated and PVC sheathed Copper conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes with cable tray & Earhing |
| 866 | Water treatment plant 300 KLD capacity |
| 867 | FILTER FEED PUMPS |
| 868 | Supply, Installation, testing and commissioning of pumping system comprising the following: |
| 869 | Horizontal centrifugal monoblock pumps with mechanical seal, CI casing, CI impellerand SS 304 shaft , 2900 rpm connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia Pressure Gauge and rubber bellow on delivery and suction,cyclic timer. including MS skid and mounting of the pumps on the skid.(Motor to be of the same make as the pump) |
| 870 | Pump Capacity (lpm) 375 |
| 871 | Pump Head 25 mtr |
| 872 | No. of Working Pumps 1no. |
| 873 | No. of Standby Pumps 1 no. |
| 874 | 1set |
| 875 | SumpPump |
| 876 | Supply, Installation, testing and commissioning of sump pump comprising the following: |
| 877 | Submersible centrifugal pumps with mechanical seal, CI casing, CI impellerand SSshaft , 2900 rpm with suitable capacity TEFC induction motor suitable for 220 ± 10 % volts, 1 phase, 50 cycles A.C. Supply. |
| 878 | Pump Capacity (lpm) 180lpm |
| 879 | Pump Head 10 mtrs |
| 880 | Solid Size 30 mm |
| 881 | No. of Working Pumps 1no. |
| 882 | No. of Standby Pumps 1no. |
| 883 | Make of pump and motor- Kirloskar, wilo,Pressure Gauge-H Guru |
| 884 | DOMESTIC TRANSFER PUMPS |
| 885 | Supply, Installation, testing and commissioning of pumping system comprising the following: |
| 886 | Horizontal centrifugal monoblock pumps with mechanical seal, CI casing, CI impellerand SS 304 shaft , 2900 rpm connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia Pressure Gauge and rubber bellow on delivery and suction,cyclic timer. including MS skid and mounting of the pumps on the skid.(Motor to be of the same make as the pump) |
| 887 | Pump Capacity (lpm) 475 |
| 888 | Pump Head 45mtr |
| 889 | No. of Working Pumps 1no. |
| 890 | No. of Standby Pumps 1no. |
| 891 | Make of pump and motor- Kirloskar, wilo,Pressure Gauge-H Guru |
| 892 | MULTIGRADE SAND FILTER |
| 893 | Supply Installation, Testing and commissioning of MSEP vessel filter with Butterfly valve, Frontal piping and distrubution system. Filter shall be suitable for working pressure of 3.5kg / cm² and shall include filter media, standard fittings like pressure gauges,sampling cock,rinse drain, |
| 894 | Capacity 25cum/h |
| 895 | Filtration rate15 m^3/ m^3/hr |
| 896 | Height of shell 1.8mtrs. |
| 897 | Max. operating pressure 3.5 kg/sq.cm |
| 898 | Test pressure 5.5 kg/sq.cm |
| 899 | Working Hours 12hrs/day |
| 900 | dia of filter 1.4mtrs |
| 901 | Out Put Suspended solids : less than 5ppm |
| 902 | Media (minimum)2200kg |
| 903 | 1set |
| 904 | ACTIVATED CARBON FILTER |
| 905 | Supply Installation, Testing and commissioning of MSEPvessel filter withButterflyvalve, Frontal piping and distrubution system. Filter shall be suitable for working pressure of 3.5kg / cm² and shall include filtermedia & Carbon media , standard fittings like pressure gauges,sampling cock,rinse drain, |
| 906 | Capacity 25cum/h |
| 907 | Filtration rate15 m^3/ m^3/hr |
| 908 | Height of shell1.8mtrs. |
| 909 | Max. operating pressure 3.5 kg/sq.cm |
| 910 | Test pressure5.5 kg/sq.cm |
| 911 | Working Hours12hrs/day |
| 912 | dia of filter 1600mm |
| 913 | Activated Carbon Media 1200kg. |
| 914 | Apparent Density 600-650kg/m3 |
| 915 | 1set |
| 916 | Supply, installation, testing and commissioning of magnetic level sensors and controllers, CPVC probe tube, PP actuating float and all other equipment required for the performance of the system to the satisfaction of the engineer in charge complete including providing and fixing wiring from control junction box near the UG tank to probes of required length, interconnection wiring between level controller and the concerned contactor in the starter panel as required. The level controller will perform the following functions. |
| 917 | To switch on the pumps ( tube well pumps, filter pumps,domestic water transfer pumps ) when the level of water in the supply water tank is lowandto cut off the pump when the level in therecieving watertank is high. |
| 918 | To indicate 5 levels of water in all tanks through a control panle with LEDs |
| 919 | To start the pumps in a cyclic order. |
| 920 | The system shall be complete to ensure automatic operation of pump in accordance to water level in respective tanks. |
| 921 | 1set |
| 922 | Providing, fixing, jointing and testing in positionthefollowingmedium class G.I. pipesconformingto IS:1239 cutto requiredlengthsincluding all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions,reducers,flanges& plugs etc. fixing at wall/ceiling level supported by clamps, hangers including paint etc,cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealent complete as required. |
| 923 | 65 mm dia 36mtr |
| 924 | 80 mm dia 12mtr |
| 925 | 100 mm dia 12mtr |
| 926 | (Pipe Make -Jindal hisar/ Fittings Make - Unik .eqv ) |
| 927 | Providing & fixing of butterfly valve (Wafer Type) of S.G. Iron disc (Body S.G. Iron, Without lungs, lever operated, S.G. Iron Disc, Nirtrile/EPDM Rubber Lining , test Pressure PN-16) with flanges, nut bolts, gasketscomplete required. |
| 928 | 65 mm dia 10 no. |
| 929 | 80 mm dia 2 no. |
| 930 | 100 mm dia 4.no. |
| 931 | (Make - Kartar /Sant) |
| 932 | Providing & fixing of Cast Iron Dual Plate wafer Type Check Valve (PN 16) with SS-304 Discs and Nitrile Rubber Lining. Shell test Pressure - 24.5 Kg/Cm2 g) with flanges, Nut, bolts & washers, etc. complete as required. |
| 933 | 65 mm dia 6 no. |
| 934 | (Make - Karta/Sant) |
| 935 | Providing & fixing C.I. \"Y\" Strainer (screwed / flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flanges / union nuts, bolts & washers complete as required. |
| 936 | 80 mm dia 4no. |
| 937 | (Make - Kartar /Sant) |
| 938 | Supplying, installing, testing and commissioning of chlorine dosing systemconsisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V/Single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. . 1set |
| 939 | ELECTRICAL |
| 940 | Supply ,installation,testing & commissioning ofWall mountedenclosed dust and vermin proof front operated cubical type panel of uniform width suitable for used on 415V 35 KA fault level 3 phase 4 wire, 50 c/s, febricated from 1.6/2mm CRCA sheet, powder coated complete housed with incoming and outgoing aluminium bus bar including supply , fixing of base channel of suitable sizewith undernoted switch gear & auto mation as per fire nomes. |
| 941 | INCOMER |
| 942 | 1 No. 100ATPN MCCB (35 KA) with microprossor base. |
| 943 | Digital electronic VAF (conzerve – EM 6100)with inbuilt selector switch and 3 Nos, 60/5 amps 5 VA, CL 1 CTs . - 1 Set |
| 944 | 1 Set of RYB phase indication lights with 2A MCB. |
| 945 | three phase energy meter |
| 946 | BUS BAR |
| 947 | 150 AMP,500 Volts, 3 phase 50 HZTPN high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp. |
| 948 | OUT GOING |
| 949 | Each set comprises |
| 950 | 10 A -TP 10kA MCB \"C\" Curve-1no. |
| 951 | 9A 3P Power Contactor-1no |
| 952 | 2.1-3.1 A Overload Relay -1no |
| 953 | SPP-1no |
| 954 | Analog Amp.meter with Selector Switch -1no |
| 955 | Auto Manual Selector Switch with remote wiring 1 No |
| 956 | On/OffIndicatingLamps-2nos |
| 957 | Start/Stop Push Buttons -2 nos |
| 958 | Control MCB-3nos |
| 959 | Cyclic timer -1 no |
| 960 | Out Going 7.5 HP DOL Starter -2 sets for feed pump(1W+1S) |
| 961 | Each set comprises |
| 962 | 63Amp. TP MCB (10ka)\"C\" Curve-1Nos |
| 963 | 32A 3P Power Contactor-1no |
| 964 | 14-23A Overload Relay -1no |
| 965 | SPP-1no |
| 966 | Cyclic timer -1 no |
| 967 | Analog Amp.meter with Selector Switch-1no |
| 968 | A/M Switch |
| 969 | On/OffIndicating Lamps |
| 970 | Start/Stop Push Buttons |
| 971 | Control MCB 2amp. |
| 972 | Out Going 10 HP DOL Starter -2 sets for Transfer pump(1W+1S) |
| 973 | Each set comprises |
| 974 | 40Amp. TP MCB (10ka)\"C\" Curve-1Nos |
| 975 | 25A 3P Power Contactor-1no |
| 976 | 9-14A Overload Relay -1no |
| 977 | SPP-1no |
| 978 | Cyclic timer -1 no |
| 979 | Analog Amp.meter with Selector Switch-1no |
| 980 | A/M Switch |
| 981 | On/Off Indicating Lamps |
| 982 | Start/Stop Push Buttons |
| 983 | Control MCB 2amp. |
| 984 | Note :- MCCB,MCB,Contractor, Relay , & SPP ( L&T make) |
| 985 | MCCB : L&T D-Sine |
| 986 | MCB : L&T /Legrand |
| 987 | All the cts shall be Cast resin |
| 988 | Earthing Bus : |
| 989 | One (1) No. of Aluminium earthing bus of suitable size all along thePanel with 2 earthing bolts of suitable size.. |
| 990 | Supply ,Laying,testing & commissioning of The suitable sizePVC / XLPE insulated armoured aluminium conductor power cable from control panel to pumps will be included in above item along with terminations, cable glands & cable trays etc as required. (Cable Make :Finolex / Polycab / Rallison/RPG) |
| 991 | 3X6mm sq.aluminium armoured cable |
| 992 | 3X10mm sq.aluminium armoured cable |
| 993 | ROAD AND PARKING SHED (HSR PART) |
| 994 | Filling available excavated earth (excluding rock) in trenches, cum plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift up to 1.5 m.(HSR 4.32) |
| 995 | Extra for using hardener at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respec (HSR 10.15) |
| 996 | Compaction of Earthwork - Compaction of & preparation of sub grade including loosening, levelling of earth 225 mmthick top layer, rough dressing of soil, final dressing of earth to give level, camber, atering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 3000-2 as per technical clause 305 of MORT&H specifications (in case of link roads earthwork to be done by villagers) (HSR 17.5.3) |
| 997 | Excavation for roadwork in soil by mechanical means including cutting and loading in tippers,trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead up to 1000m as per technical clause 301 of MORT&H specifications (HSR 17.10.1) |
| 998 | Construction of granular sub-base by providing Material as per Grading Ill (Table 400-1 of MORT&H 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications(HSR 17.14) |
| 999 | 17.14.1) Grading I material |
| 1000 | Construction of dry lean cement concrete Sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15: 1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing, as per clause 601 of MORT&H specifications (HSR 17.44) |
| 1001 | Providing and Laying 600 mm dia Reinforced 2900 Cement Concrete Pipe NP3 / NP-4P /prestressed Concrete Pipe on First Class Bedding in Double RowProviding and Laying Reinforced cement concrete pipe NP3 /NP-4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1 :2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets 1000 mm dia, as per clause 2900 of MORT&H specifications(HSR 17.61.2) |
| 1002 | Providing and Laying 80 mm thick ISi marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect.(HSR 17.69.2) |
| 1003 | Providing and Laying 60 mm thick ISi marked lntertocking Paver Blocks conforming to IS15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 35 over the bed of 25 mm thick fine sand complete in all respect. (HSR 17.69.3) |
| 1004 | Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORTH specifications(HSR 17.72) |
| 1005 | Cast in Situ Cement Concrete M 20 Kerb with ChannelConstruction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. Using Concrete Mixer(HSR 34.2.1) |
| 1006 | Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45xD.45xD.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012(HSR 34.5) |
| 1007 | 34.5.1) Cautionary /warning sign boards of equilateral triangular shape having Each side of 900 mm with support length of 3650 mm |
| 1008 | Mandatory sign board 900 mm circular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 (HSR 34.6) |
| 1009 | 34.6.1) Using retro reflective Sheeting Class C as per IRC 67-2012 |
| 1010 | Informatory sign board 800x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm onboth sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x6Dx3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete asper clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from anindependent test laboratory including three year outdoor weathering test report for sheetingtested in India condition conforming to clause 6.7 of IRC 67-2012(HSR 34.8) |
| 1011 | 34.8.1) Using retro reflective Sheeting Class C as per IRC 67- 2012 |
| 1012 | Informatory sign board 600x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67- 2012 fixed over 3 mm thick aluminiumComposite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per dause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 (HSR 34.10) |
| 1013 | 34.10.1) Using retro reflective Sheeting Class C as per IRC 67 2012 |
| 1014 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Note:- 1. A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface.(HSR 34.26) |
| 1015 | Supply and Fixing of Tensile Sheet Shed 650GSM sheet with M.S Iron pipeFrame Pole 125mm Heavy Truss M.S Pipe 60mm Heavy, Membrane M.S Pipe 50mm Heavy, Complete With cost of Painting and Labour for Fixing Paint Complete in all respects (HSR 13.34) |
| 1016 | ROAD (NS PART) |
| 1017 | Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete |
| 1018 | Providing 90mm x 4mm size groove as expansion joint in concrete pavement by mechanical cutter, complete in all respect |
| 1019 | BOUNDARY WALL (HSR PART) |
| 1020 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (HSR 4.4) |
| 1021 | 4.4.1) All kinds of soil |
| 1022 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (HSR 4.12) |
| 1023 | 4.12.1) All Kinds of soil |
| 1024 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (HSR 4.32) |
| 1025 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. (HSR 6.1) |
| 1026 | 6.1.6) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 1027 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (HSR 6.25) |
| 1028 | 6.25.1) All work upto plinth level |
| 1029 | 6.25.2) All work from plinth level upto floor IV level. |
| 1030 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : (HSR 6.30) |
| 1031 | 6.30.1) Foundations, footings, bases of columns etc. for mass concrete. |
| 1032 | 6.30.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 1033 | 6.30.6) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 1034 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 6.33) |
| 1035 | 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1036 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement (HSR 6.34) |
| 1037 | 6.34.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1038 | Providing and fixing in position 12mm thick bitumen impregnatedfiber board conforming to IS: 1838, including cost of primer, sealingcompound Grade-A in expansion joints. (HSR 6.58) |
| 1039 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in: (Derived Rate) (HSR 7.21)+ (7.40 - 7.39) |
| 1040 | 7.21.2) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 1041 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). (HSR 7.51) |
| 1042 | Dressed or moulded two brick cornice laid in cement sand mortar 1 :4 including 12 mm thick cement plaster 1 :4 or pointing, as required. (HSR 7.57) |
| 1043 | 12 mm cement plaster of mix : (HSR 11.5) |
| 1044 | 11.5.3) 1:4 (1 cement: 4 coarse sand) |
| 1045 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete(HSR 11.58) |
| 1046 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:(HSR 11.67) |
| 1047 | 11.67.1) Water thinnable cement primer |
| 1048 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : (HSR 11.71) |
| 1049 | 11.71.1) Two or more coats on new work |
| 1050 | BOUNDARY WALL (NS PART) |
| 1051 | Providing and fixing of chicken wire mesh/ fibre mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge |
| 1052 | LANDSCAPING AND HORTICULTURE WORK (HSR PART) |
| 1053 | Supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-in charge including screening through sieve of LS.designation 16 mm with 5 km lead.(HSR 26.1) |
| 1054 | Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds . (HSR 26.2) |
| 1055 | Spreading of sludge, farm-yard manure or/and good earth in required thickness (Cost of sludge, farm-yard manure or/and good earth to be paid for separately) (HSR 26.3.6) |
| 1056 | Mixing earth and sludge or farm yard manure in proportion specified or as directed (HSR 26.3.7) |
| 1057 | Clearing jungle manually including uprooting rank vegetation , grass, woody vegetation up to 30cm girth measured at height 1 m above ground level and removal of rubbish up to a distance of 50 m out side the periphery of the area cleared(HSR 26.4.3) |
| 1058 | Fine dressing of the ground. (HSR 26.4.12) |
| 1059 | Turfing lawns with fine grassing ( selection no.1/ Bermuda and Mexican/Neelgiri grass )including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1 / Bermuda doob grass and Mexican/Neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of 0.60 cum per 100 sqm, maintenance till weed free turf is formed(HSR 26.9) |
| 1060 | 26.9.1) Planting selection no. 1 grass roots in rows 5 cm apart in both directions. |
| 1061 | Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbishnwith all lifts and leads. (HSR 26.10) |
| 1062 | Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) (HSR 2021/ 26.13) 26.13.4) Hole 0.60 metre dia and 0.60 metre deep (HSR 26.13) |
| 1063 | Supplying and planting in prepared pits and watering, healthy , each vigorous growing , permanent trees including ,application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem , full of foliage ornamental tree sapling each to be supplied in 30cm x 30cm poly bags (HSR 26.14) |
| 1064 | Supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 ml chlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker (HSR26.18) |
| 1065 | Supply and Planting rare and specimen tree plants in already prepared pits (Ficus starlight 150 cm height , Terminalia 210 cm height, menatalis , Michelia champaca hybrid more than 180 cm height, Cyprus (Golden juniperous) more than 180 cm height, topiary of 1 O to 12 no. well trimmed bolls of more than 30cm size of Ficus nuda, Ficus retusa, Ficus long island , Ficus panda more than 180 cm height, Golden bottle brush , casurina equistefolia , Bottle palm with stem circumference at base more than 40cm ,Washingtonia palm of healthy clear stem height below leaf more Thant 90 cm) including , fertilizer and insecticides chlorpyriphos 20 ml per pit, planting of 180cm to 210cm tall sapling in position and flooding with water .specie of plant will be decided by engineer in charge.(HSR 26.20) |
| 1066 | Planting flower beds including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of F1 hybrid well bloomed flower saplings to be supplied in polybags at 25cm distance from plant to plant and row to rowminimum 15 no . plants per sqm(HSR 26.22.2) |
| 1067 | Supply and planting ground cover plants including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of saplings at 23cm distance from plant to plant and row to row, minimum 19 no. plants per sqm.(HSR26.26) |
| 1068 | Planting permanent edging plants around beds, lawn or along pathsincluding of digging of trench 45 cm wide to 15 cm depth, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 0.9 cum per sqm and supplying and planting hedge/ edge at 20 cm apart in one or two rows @11 no. well trimmed bushy ,multi branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per sqm (HSR 26.32) |
| 1069 | Supply of well bumt cylindrical earthen pots and filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one part of manure)and placing them (HSR 26.38) 26.38.3) 25 cm size of pots filled to full volume. |
| 1070 | 26.38.4) 30 cm size of pots filled to full volume. |
| 1071 | Supply and installation of garden bench (HSR 2021 / 26.58) 26.58.1) Chair type garden bench with L-shaped sides made ofreinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications (HSR 26.58.1) |
| 1072 | Providing and displaying of Areca palm plant, having ht. 1.20 m to 1.50 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (HSR 26.103) |
| 1073 | Providing and displaying of Dieffenbachia maculata plant, having ht. 30 cm to 45 cm with 5 and above leaves, well developed, fresh and healthy & attractive variegated foliage in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (HSR 26.125) |
| 1074 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 1 O to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge (HSR 26.157) |
| 1075 | Providing and stacking of Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge (HSR 26.458) |
| 1076 | Providing and displaying of Rhapis Palm plant, having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots & as per direction of the officer-in-charge (HSR 26.160) |
| 1077 | Providing and Displaying Cycus revoluta specimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumference of base stem well developed in 40 cm challi, as per direction of the officer-in-charge. (HSR26.283) |
| 1078 | Providing and Displaying Ficus reginold well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy plant in 35 cm Cement Pot as per direction of the officer-incharge. (HSR 26.293) |
| 1079 | Providing and Displaying Furcaira variegated well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per direction of the officer-in-charge. (HSR 26.299) |
| 1080 | Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officerin- charge. (HSR 26.301) |
| 1081 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Polybag & as per direction of the officer-in-charge (HSR 26.318) |
| 1082 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 30-40 cm well developed in big HDPE bags as per direction of the officer-in-charge (HSR 26.355) |
| 1083 | Providing and stacking ofFicus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in 35 cm HDPE bags as per direction of the officer -in-charge. (HSR 26.370) |
| 1084 | Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in 35 cm HDPE bags as per direction of the officer-in-charge(HSR 26.413) |
| 1085 | Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HOPE Bags as per direction of the officer-in- charge.(HSR 26.432) |
| 1086 | Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed each with healthy foliage in Polybag of size 30 cm as per direction of the officer-in-charge.(HSR 26.509) |
| 1087 | UNDER GROUND TANK (HSR PART) |
| 1088 | Loading, Unloading, and Carriage of Materials,By Mechanical Transport including loading, unloading and stacking (HSR 3.1) (Derived Rate 3.1.2- Ho 001) |
| 1089 | 3.1.2) Upto 10 kms |
| 1090 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (HSR 4.4) |
| 1091 | 4.4.1) All kinds of soil |
| 1092 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (HSR 4.12) |
| 1093 | 4.12.1) All Kinds of soil |
| 1094 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (HSR 4.31) |
| 1095 | 4.31.1) All kinds of soil |
| 1096 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (HSR 4.32) |
| 1097 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. (HSR 6.1) |
| 1098 | 6.1.6) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 1099 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (HSR 6.25) |
| 1100 | 6.25.1) All work upto plinth level |
| 1101 | 6.25.2) All work from plinth level upto floor IV level. |
| 1102 | Extra for providing richer mixes at all floor levels.(HSR 6.26) |
| 1103 | (Note :- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). |
| 1104 | Providing M-35 grade concrete instead of M-25 grade BMC/ RMC. (Note : Cement content considered in M-35 is @ 350 kg/cum) (HSR 6.26.2) |
| 1105 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : (HSR 6.30) |
| 1106 | 6.30.1) Foundations, footings, bases of columns etc. for mass concrete. |
| 1107 | 6.30.2) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 1108 | 6.30.3) Suspended floors, roofs, landings, balconies and access platform. |
| 1109 | 6.30.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 1110 | 6.30.6) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 1111 | 6.30.7) Stairs, (excluding landings) except spiral - staircases. |
| 1112 | 6.30.16) Edges of slabs and breaks in floors and walls |
| 1113 | 6.30.16.1) under 20 cm wide |
| 1114 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 6.33) |
| 1115 | 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1116 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth levelNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement (HSR 6.34) |
| 1117 | 6.34.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1118 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in: (Derived Rate) (HSR 7.21)+ (7.40 - 7.39) |
| 1119 | 7.21.2) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 1120 | Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks) (HSR 7.30) |
| 1121 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor IV level. (HSR 7.31) |
| 1122 | 7.31.2) Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 1123 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 Kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (HSR 10.12) |
| 1124 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (HSR 10.13) |
| 1125 | 10.13.1) 18 mm thick |
| 1126 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mmor more (thickness to be specified by the manufacturer), of 1st qualityconforming to IS : 15622, of approved make, in colours White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm includinggrouting the joints with white cement and matching pigments etc., complete. (HSR 11.60) |
| 1127 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58) |
| 1128 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1 :5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1 :6 (1 cement : 6 fine sand). (HSR 11.18) |
| 1129 | 11.18.1) 1:4 (1 Cement : 4 fine sand) |
| 1130 | Neat cement punning (HSR 11.3) |
| 1131 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per1ite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete (HSR 11.46) |
| 1132 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete(HSR 11.58) |
| 1133 | White washing with lime to give an even shade : (HSR 11.61) |
| 1134 | 11.61.1) New work (three or more coats) |
| 1135 | Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) >93%ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0iii) Bulk Density - 0.8 to 0.9 kg/litreiv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cPv) Pot Life - Min. 1 BO minutesvi) Coverage after 1 st coat - 80-1 00 sqft/kgvii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B (HSR 11.70) |
| 1136 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.(HSR 11.76) |
| 1137 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.(HSR 11.77) |
| 1138 | Painting the wooden I metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade(HSR 11.82) |
| 1139 | 11.82.1) Two or more coats on new work |
| 1140 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37) |
| 1141 | 12.37.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 1142 | Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality (HSR 12.12) |
| 1143 | 12.12.2) 1mm thick |
| 1144 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 Kg to 80 Kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Powder coated) Note:- Nothing will be paid extra for powder coating(HSR 12.89) |
| 1145 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (Powder coated) Note:- Nothing will be paid extra for powder coating(HSR 12.98) |
| 1146 | 12.98.2) 250x16 mm |
| 1147 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (Powder coated) Note:- Nothing will be paid extra for powder coating(HSR 12.99) |
| 1148 | 12.99.1) 300x10 mm |
| 1149 | 12.99.3) 200x10 mm |
| 1150 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (Powder coated) Note:- Nothing will be paid extra for powder coating(HSR 12.102) |
| 1151 | 12.102.2) 100 mm |
| 1152 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (HSR 13.29) |
| 1153 | 13.29.2) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 1154 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 2.0 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) |
| 1155 | 13.3.1) Profile B |
| 1156 | 13.3.1.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 1157 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer (HSR 13.42) |
| 1158 | 13.42.1) M.S. tube |
| 1159 | WATER PROOFING FOR RAFTSupplying and applying waterproofing treatment for \"Raft Slab\" by using 1.2 mm thick fully bonded HDPE sheet membrane complying to BS8102:2009/ IS 16471-2017. The HDPE shall be virgin HDPE & not recycled, thickness of bare HDPE shall not be less than 0.8 mm coated with pressure sensitive adhesive layer and a trafficable granular top layer. The HDPE membrane shall have the following typical properties: 1. Tensile Strength : >27 Mpa ( as per ASTM D412)2. Puncture Resistance: >1000N±5% (as per ASTM E154)3. Elongation: >500%4. Peel adhesion to concrete: >1500N/m (as per ASTM D903 Modified)5. Resistance to Hydrostatic Head: >70 metre (as per ASTM D751-06(2011)6. UV exposure test (60 days): No change7. Lap Joint Strength: 1500N/m (as per ASTM D1876)HDPE Membrane shall be installed over the entire PCC area with standard75 mm selvedge laps and end laps overlaid with HDPE Sealed Tape as permanufacturer\"s instructions. The rates are inclusive of supply and installationof membrane as per manufacturer methodology.The rates are inclusive of surface preparation, injection grouting at honeycombed areas all complete as per manufacturer methodology. (HSR 28.8) |
| 1160 | Retaining wall Water ProofingSupplying and installing 1.5 mm thick SBS membrane, self-adhesive polymer modified bitumen comprising of a cross laminated HDPE carrier film. Membrane shall come with a BBA certification giving a durability of membrane up to the life of the structure and shall have Tensile Strength : L:215N/50mm T: 220N/50mm ( as per BS EN12311-1), Elongation : L: 324% and T: 238% (as per BS EN12311-1), Water Vapour Permeability : Impermeable to ISO 12572 (as per BS EN 1931), Resistance to Hydrostatic Head: Min 60m( as per ASTM D5385), Adhesion to primed concrete : 4.9mm (as per ASTM D1000). The surface shall be primed using Bituminous Primer and membrane shall be installed with an edge lap of 50 mm and end lap of 150 mm. Membrane Termination shall be done by providing a groove cut of 30mm x 30mm, put the membrane inside the groove, nailing of aluminium flashing at 200mm c/c & sealing with a suitable PU Sealant at the termination of waterproofing membrane at minimum of 300mm height on the vertical wall, as per the manufacturer\"s Specification. Membrane shall be protected using 8mm thick dimple board for protection as per manufacturer\"s recommendation followed by backfilling. The rates are inclusive of surface preparation, crack filling, injection grouting at honeycombed areas, coving, priming all complete as per manufacturer methodology but excluding for protection board. (HSR 28.11) |
| 1161 | Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage & water treatment plant, tunnels I subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer\"s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACl-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared withcontrol concrete as per DIN 1048 and resistant to 16 bar hydrostaticpressure. The crystalline admixture shall be capable of self-healing of cracksup to a width of 0.50mm. The work shall be carried out all complete as perspecification and the direction of the Engineer-in-charge. The productperformance shall carry guarantee for 1 O years against any leakage.. (HSR 28.18) |
| 1162 | UNDERGROUND WATER TANK (NS PART) |
| 1163 | Providing and fixing of chicken wire mesh/ fibre mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge |
| 1164 | GATE (HSR PART) |
| 1165 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (HSR 4.14.1) All kinds of soil. |
| 1166 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 6.1)6.1.1) 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) |
| 1167 | 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 1168 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: (HSR6.14)6.14.1) 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size) |
| 1169 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : (HSR 6.15) 6.15.1) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size) |
| 1170 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiralstair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size) (HSR 6.16) |
| 1171 | Centering and shuttering including strutting, propping etc. andremoval of form for (HSR 6.30)6.30.3) Suspended floors, roofs, landings, balconies |
| 1172 | 6.30.7) Stairs, (excluding landings) except spiral-staircases |
| 1173 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending,placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc.complete in all respect above plinth levelSteel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending,placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc.complete in all respect above plinth level (HSR 6.34)6.34.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1174 | Brick work with common burnt clay non-modular bricks of class designation 12.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :(HSR 7.22) (Derived rate)+ (7.40 - 7.39)7.22.1) Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 1175 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platfonns, vanity counters, window sills, facias and similar locations of required size, approved shade, colour andtexture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (HSR 8.26)8.26.2) Granite of any colour and shade8.26.2.2) Area of slab over 0.50 sqm |
| 1176 | Providing and fixing facing extruded clay Tile (Glass ReinforcedClay Tiles (GRC)) any size any shade & design on wall with underlayer of 12 mm thick cement plaster 1 :3 and jointed with neat cementmatched with pigment complete as per drawings,specifications and tothe entire satisfaction of engineer- in- charge (HSR 8.31) |
| 1177 | Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling. (HSR 10.1) |
| 1178 | Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge (HSR 10.48) |
| 1179 | 1 O mm thick cement plaster (HSR 11.4)11.4.2) 1 :3 (1 cement: 3 fine sand) |
| 1180 | 12 mm cement plaster of mix (HSR 11.5)11.5.3) 1 :4 (1 cement: 4 fine sand) |
| 1181 | 15 mm cement plaster on the rough side of single or half brick wall of mix (HSR 11.6) 11.6.1) 1 :4 (1 cement: 4 fine sand) |
| 1182 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : (HSR 12.157)12.157.1) For fixed portion12.157.1.2) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 1183 | 12.157.2) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)12.157.2.2) Powder coated aluminium (minimum thickness of kg powder coating 50 micron) |
| 1184 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M .S. Flat 15x3 mm and nuts & bolts complete. (HSR 13.9)13.9.2) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 1185 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (HSR 13.29)13.29.2) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 1186 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (HSR 13.41) |
| 1187 | GATE (NS PART) |
| 1188 | Providing & fixing 5mm thick reflective glass in of approved make all respect |
| 1189 | P/F in position stainless steel screwa 4\" long fastener complete in all respect |
| 1190 | BASKET BALL GROUND (HSR PART) |
| 1191 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1)6.1.1) 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) |
| 1192 | 6.1.8) 1:5:10 (1 cement : 5 fine sand : 10 graded stone cumaggregate 40 mm nominal size) |
| 1193 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: (HSR 2021/ 6.14)6.14.1) 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size) |
| 1194 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length includinghooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 2021/ 6.33)6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 1195 | Cement mortar 1:6 (1 cement: 6 coarse sand)Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 confonning to IS: 2222 in superstructure above plinth level up to floor four level in cement mortar 1 :6 (1 cement : 6 coarse sand)(HSR 2021/ 7.23)7.23.1) With non-modular bricks. |
| 1196 | Brick edging 7cm wide 11.4 cm deep to plinth protection withcommon burnt clay non-modular bricks of class designation 7.5 including grouting with cement mortar 1 :4 (1 cement : 4 fine sand) (HSR 2021/ 7.55) |
| 1197 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : (HSR 2021/10.37)10.37.1) 25 mm thick |
| 1198 | Applying priming coat: (HSR 2021/ 11.68)11.68.3) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 1199 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 2021/ 11.78) |
| 1200 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (HSR 2021/ 13.27) |
| 1201 | BASKET BALL GROUND (NS PART) |
| 1202 | Rebound Pro superior ultra cushioned surface - 1. The first layer will be acrylic resurfacer. 2. The two layer of heavy cushion. 3. The three layer for fine cushion. 4. The final two layers for colour coat. 5. Court line marking |
| 1203 | Providing and fixing standard set of Basketball Poles with 8\"\" vertical pipes (10G) 5\"\" channel extension and 25 mm acrylic sheet (1.80x 1.05m) complete with rings, break way type and net, including installation, complete in all respect. |
| 1204 | Providing and fixing standard set ofVolleyball Poles(10G) net (fine quality) complete in all respect, includding padding (6\"\" post padds having 2\"\" thick polyurethene foam and covered witth vinyl coated nyloan poly rope cable and Antenna. |
| 1205 | TENNIS COURT PART |
| 1206 | Preparation of Synthetic Tennis Court. Size 36 MT X 18 MT =648 Sqm1. Soil TreatmentSize 36 MT X 18 MT full treatment of soil with anti-termite chemical. (NS item) |
| 1207 | Preparation of Base size 36mt x 18mt = 648 sq mt1. (a) Excavation to a depth between 6” as required to remove all weeds andgrass from its roots, create a slope in the sub base from the centerline towardsthe lower end, back fill with goods earth as required any grass of weeds andproperly sieved) Extreme care would need to be taken to ensure a correct slopeof 1” in every 10’B. Compaction of sub-base will be 8-10 ton roller to achieve 95% proctordensity.C. Carry out anti termite and weed cite on the total area by making 9” deepholes spaced 12” apart and injecting the chemicals and also spraying.D) Providing and laying of clay layer mixer with surkhi and coarse bajari inappropriate ration as decided by the and as per standard slope. The surface shallbe laid and wet rolling and finishing shall be done in operations as directed byEngineersE) Providing and laying of layer of red bajari mixed with surkhi andcompaction, rolling, finishing upto desired level.F) Providing and laying superior quality Red Bajari for top surface and rollingup to desired finish complete.G) Marking of tennis court Base lines, Service lines and side lines as perstandards complete as per direction of engineers. (NS item) |
| 1208 | Chain Link FencingProviding, fabricating & erection of G.I Chain Link Fencing (50 mm x 50mm12 guage hexagonal shape on toe wall consisting of erection of 50mm ODM.S. pipe at appox distance of 10ft c/c/ (VerticalMember) grouting the samein the toe wall and tie the horizontal member with 58mm O.D. MS Pipe on topand 35mm OD M.S. Pipe at bottom Providing on gate. Complete with twocoats of enamel paint with one court of red oxide primer on MS round pipe,not on G.I. Chain link fenching. Height of chain link fenching is 10 ft from toe wall. (NS item) |
| 1209 | Flood Lightings i) Supply and installation of 100 mm OD M.S. pipe of 20ft to 22ftlength.ii) 400 watt metal hellogen Lamps, with box , lamp & accessories.iii) Main 440 kv/220 kv /110kv 3 phase TPN, MCB DB, with Nos. ofaluminium/ copper busher R,Y,B,N code with 16 amps MCB (IP-65weather proof)iv) Cable Armorned alluminium cabel 6 sq mm x 4 core cable.v) Cable copper Glands A) 6 sq mm x 4 core cable.vi) Earthing alluminium wire 12 quage.vii) Fabricationg for plateform on pole & Gearbox Mounting bracket.Total Numbers of Poles required for each Ground – 4 Nos. (NS item) |
| 1210 | Tennis Poles (KEEPFIT) (NS item) |
| 1211 | Tennis Net (SPORTIVA) (NS item) |
| 1212 | Rebound Pro superior ultra cushioned surface - 8 layers 1. The first layer will be acrylic resurfacer. 2. The two layer of heavy cushion. 3. The three layer for fine cushion. 4. The final two layers for colour coat. 5. Court line marking |
| 1213 | Providing and fixing DAVS cup std set of lawn tennis net pole complete in all respect. |
| 1214 | SHED (HSR PART) |
| 1215 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1)6.1.1) 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) |
| 1216 | 6.1.8) 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum aggregate 40 mm nominal size) |
| 1217 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR 2021/ 13.28) |
| 1218 | Dressing bed and preparation of sub grade for lining by mechanical/ mannual means (HSR 2021/ 14.1) |
| 1219 | SHED (NS PART) |
| 1220 | P&F 3mm DND fibre glass sheet, UV stabilized material with sheet fitting and water proofing with silicon sealant, screws etc. without welding job work complete in all respect |
| 1221 | Finishing of the laid cement concrete with vacuum dewatering system, surface vibrator and fine trowel complete in all respect (Trimix) |
| 1222 | Providing 50mm x 4mm size groove as expansion joint in concrete pavement by mechanical cutter, complete in all respect |
| 1223 | SWIMMING POOL EQUIPMENT PART |
| 1224 | Supply, installation, testing & commissioning of Swimming Pool Filtration Plant, related equipments & accessories as detailed: Pressure Sand Filter |
| 1225 | Vertical Self Supporting Pressure -Bobbin wound Filter 1200mm Diameter with 2\" Side mount Valve and internals. , UV Resistance surface finish, dished ends complete with UPVC face piping with Manual multiport valve, water drain valve, pressure gauge, sample cock, air vent and all accessories with initial charge of filter media and with vertical supports with piping and suitable foundation and piping and as required at siteMake :PoolbuddyFlow:56 m3/hrTest pressure : 4.5 PSIWorking pressure : 3.5 PSIMax. Operating Temperature : 50°C |
| 1226 | Filtration PumpSingle stage/Horizontal self priming pumps set with Strainer, Thermoplastic injected pump casing. Impeller in noryl with Fiber Glass. Stainless steel shaft, mechanical seal in stainless steel connected to TEFC induction motor with built-in thermal protection and automatic reset suitable for 220/240 volts,5 HP, 3 phase, 50 cycles A.C supply, IP-55motor protection complete with inbuilt Filter basket in injected plastic material and vibration isolator of required size at suction/delivery of pumps Make : PoolbuddyCapacity : 28 m³/hr @ 15m head (Each)Phase : 3Qty-2 (1 Working + 1 Stand By)Connection : 1½\" BSP |
| 1227 | Supply, installation, testing & commissioning of Swimming Pool Basin Fittinga) Main DrianVGBA FRAME&GRT 18x18WHT *Make : Poolbuddy |
| 1228 | b) Bottom/ Floor Inlets NozzlesFloor Inlet 2\" for concrete PoolMake : Poolbuddy |
| 1229 | c) Vacuum PointSuction Fitting 2\" for Concrete PoolsMake : Poolbuddy |
| 1230 | d) Overflow GratingOverflow Grating-295mm wide support on overflow channel in ABS,Make : Astral |
| 1231 | Supply Maintenance Accessoriesa) 2,44m-> 4,88m Telescopic PoleMake : Poolbuddy |
| 1232 | b) Deluxe large Vac head, 4 wheels, Alu body, plastic handleMake : Poolbuddy |
| 1233 | c) Extruded PE. ?1 1/2\" - 30MMake : Poolbuddy |
| 1234 | d) Algae Brush 18\" curved in ABSMake : Poolbuddy |
| 1235 | e) Hand SkimmerMake : Poolbuddy |
| 1236 | f) Test Kit for residual chlorine & PhMake : Poolbuddy |
| 1237 | LightsStandard Underwater Lights 100 watts embedding in the pool wall with 100W - 12V halogen lamp with suitable quantity of conduit, deck boxes, transformer, cable, distribution board, required length of suitable power cable up to main swimming pool control panel and all others required fittings / accessories. (Note : The power supply to distribution board shall be supplied from swimming pool panel) Lights-LAM22 |
| 1238 | Deck-box-G-DECKBOX-1Make : Poolbuddy |
| 1239 | LadderStainless steel AISI-304 Mixed ladders with handrails with standard model step, added top double safety tread,width: 500mm, handrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. Ladder - 3 Steps,For Pool |
| 1240 | Piping Work Pipe & Fitting1) PUMP SUCTION HEADER Ø140mm2) RECIRCULATION PUMP SUCTION LINEØ90mm3) RECIRCULATION PUMP DISCHARGE LINE Ø65mm4) PUMP DISCHARGE HEADER Ø110mm5) FILTER INLET HEADER Ø110mm6) FILTER INLET/ OUTLET PIPING Ø65mm7) FILTER OUTLET HEADER Ø110mm8) FILTER OUTLET TO POOL INLETS HEADER LINE Ø110mm9) POOL BOTTOM PIPING Ø90mm10) MAIN OVER FLOW HEADER PIPING Ø250mm11) OVERFLOW BRANCH LINE Ø50mm12) POOL VACUUME LINE PIPING Ø90mm13) POOL DRAIN LINE TO PUMP SUCTION Ø140mm14) B/TANK OVERFLOW & DRAIN PIPING Ø110mm15) FITTINGS/ SUPPORTS & STRUCTURAL FOR ABOVE |
| 1241 | Valves [ Ball valve<100mm(uPVC) & Butterfly Valve >100mm(CI)]1) PUMP SUCTION VALVE Ø90mm2) PUMP DISCHARGE VALVE Ø65mm3) PUMP NON RETURN VALVE Ø65mm4) MAIN HEADER VALVEØ140mm5) MAIN HEADER NRV Ø140mm6) B/TANK DRAIN VALVE Ø140mm 7) VACUUM LINE VALVE Ø90mm8) POOL DRAIN LINE VALVE Ø140mm9) POOL INLET VALVE Ø110mm |
| 1242 | Supply, installation, testing & commissioning of Electrical Work complete with control panel / equipments, cable, cable tray, conduits etc. complete in all respect for the proper completion of the system.The following pumps shall be controlled by the panel : |
| 1243 | Installation |
| 1244 | CARRIAGE OF EXISTING EARTH |
| 1245 | CARRIAGE OF MATERIALS Loading, Unloading, and Carriage of Materials,By Mechanical Transport including loading, unloading and stacking (HSR 3.1) (Derived rate) (HSR 3.1.2 - HO001)3.1.2) EARTH Upto 10 kms |
| 1246 | DISMANTLING PART |
| 1247 | Demolishing brick work manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction of Engineer-in-charge. (HSR 5.7)a)In lime |
| 1248 | b) In cement |
| 1249 | Dismantling Concrete (HSR 5.25)f) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in charge. |
| 1250 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead(HSR 5.30) a) of area 3 sq. metres and below |
| 1251 | b) Of area beyond 3 sq. Metres |
| 1252 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (HSR 5.32)a) R.S. Joists |
| 1253 | RECOVERY PART |
| 1254 | Deduct -Brick |
| 1255 | Deduct - Brick Bats |
| 1256 | Deduct - Doors |
| 1257 | Deduct -Windows |
| 1258 | Deduct - Grider (R.S Joint) |
| 1259 | Deduct - Steel |
| 1260 | E.I HSR Part |
| 1261 | E.I. HSR Part CEILING FAN/ EXHAUST FANSupply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge as per HSR 20.71.(Make- Havells, Model- EQUS and equivalent as per brand list)i) 48\" (1200mm) |
| 1262 | ii) 56\" (1400mm) |
| 1263 | COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITSWiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. as per HSR 23.2.13. Group C |
| 1264 | Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. As per HSR 23.2.23. Group C |
| 1265 | Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe, without separate control switch, Modular type Switch/sockets wiring as per HSR 23.2.3 3. Group C |
| 1266 | Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required as per HSR 23.2.43. Group C |
| 1267 | Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required as per HSR 23.2.53. Group C |
| 1268 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUITWiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. as per HSR 23.4.1.Group A |
| 1269 | Group C |
| 1270 | Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. as per HSR 23.4.2.Group A |
| 1271 | Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch as per HSR 23.4.3.Group A |
| 1272 | Group C |
| 1273 | Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required as per HSR 23.4.4.Group A |
| 1274 | Group C |
| 1275 | Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required as per HSR 23.4.5.Group A |
| 1276 | Group C |
| 1277 | Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. as per HSR 23.5.6.1 run of Size 1.50 Sqmm(1/1.40mm) |
| 1278 | 1 run of Size 4 Sqmm(1/2.24mm) |
| 1279 | Supply and erection of MS conduit pipe 1.6 mm thick, ISi marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. as per HSR 23.6.6.1. MS Pipe of 20 mm dia. |
| 1280 | 2. MS Pipe of 25 mm dia. |
| 1281 | 3. MS Pipe of 32 mm dia. |
| 1282 | Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work as per HSR 23.7.6.PVC pipe of 25 mm dia. |
| 1283 | PVC pipe of 32 mm dia. |
| 1284 | PVC pipe of 40 mm dia. |
| 1285 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. As per HSR 23.8.1.6. Call bell 220/230 volts musical type |
| 1286 | 12. Bakelite angle/straight button holder large size. |
| 1287 | FITTING AND ACCESSORIESSupply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cmlong M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. as per HSR 23.8.4. |
| 1288 | Supply and erection 5-30 A single phase A.C. energy metre, LCD displayand optical port, with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth. as per HSR 23.8.5 |
| 1289 | Supply and erection 10-60 A Three phase A.C. energy metre , LCD displayand optical port, with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth. as per HSR 23.8.8 |
| 1290 | Supply and erection direct reading LCD Display Digital AmmetreNoltmetre ( without CT or PT ) on walVexisting penal complete in all respect with necessary connections. as per HSR 23.8.9 |
| 1291 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. as per HSR 23.8.10.i)1 & 2 Modules including combined plate for Telephone and data |
| 1292 | ii)3 Modules |
| 1293 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect as per HSR 23.8.11 i)5 amp 1 way switch |
| 1294 | iv)5 amp Socket |
| 1295 | vii)step type Fan Regulator 2 modules 300 watt |
| 1296 | viii)Telephone Socket outlet modular type |
| 1297 | ix)TV Socket outlet modular type |
| 1298 | x)Blanking plate |
| 1299 | Supplying,installation,testing and commissioning of Passive lnfrared(PIR) based occupancy sensor , non regulating programmable type, suitable for connected load up to 1 OAmp , for mounting height up to 2.8 metre and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. as per HSR 23.8.13 |
| 1300 | MCCB ,DISTRIBUTION BOARDS, MCB\"s, RCCB\"s, CHANGE OVER etc.Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. as per HSR 23.22.13. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA |
| 1301 | 4. TRIPLE POLE MCCB 125 to 160 Amp, 25 KA |
| 1302 | 6.TRIPLE POLE MCCB 300 Amp, 25 KA |
| 1303 | 9. 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 1304 | 10. 4 pole MCCB 125 to 160 amp, 25 KA |
| 1305 | 11. 4 pole MCCB 200 to 250 amp, 25 KA |
| 1306 | 12. 4 pole MCCB 300 to 400 amp , 50 KA |
| 1307 | 13. 4 pole MCCB 600 to 800 Amp , 50 KA |
| 1308 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. as per HSR 23.22.43. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) |
| 1309 | 5. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) |
| 1310 | 6. TPN DB Horizontal type Double Door 6 way ( 8 incoming 3phase*6 outgoing) |
| 1311 | 7. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) |
| 1312 | 8. TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing) |
| 1313 | 9. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) |
| 1314 | 10. Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing) |
| 1315 | 11. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing) |
| 1316 | 12. Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing) |
| 1317 | Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections: as per HSR 23.22.51. 6 amp. to 32 amp Single Pole |
| 1318 | 3. 6 amp. to 32 amp Double POLE |
| 1319 | 4. 40 amp to 63 amp. Double pole |
| 1320 | 8. 40 amp to 63 amp. MCB\"s FOUR POLE |
| 1321 | Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. as per HSR 23.22.62. DP RCCB 30ma sensitivity , 40 A |
| 1322 | 5. FP RCCB 30ma sensitivity, 40 A |
| 1323 | 6. FP RCCB 30ma sensitivity, 63 A |
| 1324 | Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. as per HSR 23.23.61. MS perforated cable tray painted with powder coating 100 X 50 X2mm |
| 1325 | 2. MS perforated cable tray painted with powder coating 200 X 50 x2mm |
| 1326 | 3. MS perforated cable tray painted with powder coating 375 X 50 X2mm |
| 1327 | 4. MS perforated cable tray painted with powder coating 600 X 50 X2mm |
| 1328 | Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. as per HSR 23.23.71. GI cable tray Cover, suitable for cable tray of 100 X 50 X 2 mm |
| 1329 | 2. GI cable tray Cover , suitable for cable tray of 200 X 50 X 2 mm |
| 1330 | 3. GI cable tray Cover , suitable for cable tray of 375 X 50 X 2 mm |
| 1331 | 4. GI cable tray Cover, suitable for cable tray of 600 X 50 X 2 mm |
| 1332 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. as per HSR 23.23.82 pair telephone wire |
| 1333 | SAFETY ITEMSSupply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages. as per HSR 23.26.1 |
| 1334 | EARTHING AND LIGHTENING ARRESTORas per HSR 24.1iii)Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 1335 | iv)Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. |
| 1336 | v)Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. |
| 1337 | vi)Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. |
| 1338 | vii)Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. |
| 1339 | viii)Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. |
| 1340 | ix)Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
| 1341 | x)Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. |
| 1342 | xi)Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. |
| 1343 | xii)Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. |
| 1344 | xiv)Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size. |
| 1345 | xv)Erection only of lightning conductor GI. tape including supply of suitable GI. staples of same size. |
| 1346 | xvi)Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers. |
| 1347 | xvii)Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete. |
| 1348 | Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work as per HSR 24.2.6.2.616 sqmm |
| 1349 | Supply and erection of suitable compression type brass cable glands for underground Cable :-as per HSR 24.2.7.210 sqmm to 16 sqmm Cable 2 to 4 Core |
| 1350 | 25 sqmm to 50 sqmm Cable 2 to 4 Core |
| 1351 | Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . as per HSR 24.2.825 sqmm |
| 1352 | 50 sqmm |
| 1353 | Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. as per HSR 24.2.9For 25 sqmm to 50 sqmm Cable 3 to 4 Core |
| 1354 | NS Part E.I |
| 1355 | E.I NS PARTS/E of LED downlighter 15W, with SPD square/ round, surface /recess mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1356 | S/E of LED Batten fitting 1 x 18/20W, with SPD surface mounting min. 110 lumens , CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1357 | Supply & Erection of 9 - 11 Watt LED bulb, minimum 110 lumens output, , operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1358 | S/E of LED mirror luminaire 10W, with SPD surface mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1359 | Supplying, fixing, connecting, testing and commissioning of 10 W Bulkhead type LEDlight fitting, with spdoperation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1360 | SITC of aviation lighting fitting with spd complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.. |
| 1361 | S/E of LED downlighter 18W, with SPD square/ round, surface /recess mounting min. 110 lumens CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1362 | S/E of LED panel 36W size 2\" x 2\", with SPD square/ round, surface /recess mounting min. 110 lumens, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1363 | Supply and erection of LED flood light 100 watt with SPD white colour, pressure diecast, CCT 5700 K, power factor greater than 0.90 and working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1364 | Supply, installation, connecting, testing and commissioning of LED Patient bed light with a nominal system lumen output of 1553 lumens and a minimum system efficacy of 153 lm/W. The luminaire shall have a rated system lifetime of 50000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI>80, beam angl of LED 120 degree. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of extrusion Al with a PCdiffuser. The total power consumption should not exceed 28 W (including driver).Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.Make: Trilux, , Wipro |
| 1365 | S/E of LED downlighter 40W, with SPD square/ round, surface /recess mounting min. 100 lu./watt, CCT 5700 K, power factor greater than 0.90 and 50000 burning hr, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 1366 | Supply and erection of metal exhaust fan, double ball bearing suitable for single phase A.C. 230 Volts, 50 HZ capacitor ,900 RPM (Heavy duty) complete with mounting ring, blade, fixing and making necessary connections etc. (Crompton greaves makeequivalent to other approved brands) i) Size 300 mm sweep\" |
| 1367 | Supply and erection of aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National make) i) Size 300 mm sweep |
| 1368 | S/E of 250 mm sweep AC Ex fan PVC body with louver shutter suitable for single phase CA 230 volt 50 hz supply 900 RPM and capacitor run complete in all respect . |
| 1369 | Supply & Erection of following siz of 1.1KV grade multicorealuminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 2 x 16 sq.mm, |
| 1370 | 3.5 x 25 sq.mm. |
| 1371 | 3.5 x 35 sq.mm |
| 1372 | 3.5 x 50 sq.mm |
| 1373 | 3.5 x 70 sq.mm |
| 1374 | 3.5 x 95 sq.mm |
| 1375 | 3.5 x 120 sq.mm |
| 1376 | 3.5 x 150 sq.mm |
| 1377 | 3.5 x 185 Sq. mm |
| 1378 | 3.5 x 240 Sq. mm |
| 1379 | 3.5 x 300 Sq. mm |
| 1380 | 3.5 x 400 Sq. mm |
| 1381 | 4 x 10 sq.mm |
| 1382 | 4 x 16 sq.mm |
| 1383 | 4 x 25 Sq. mm |
| 1384 | 4 x 50 Sq. mm |
| 1385 | Supplying and fixing 25 amps, 240 volts, SPN modular socket outlet, with 2 pole and earth,along with 25 amps \"C\" curve, SP modular MCB with modular cover sheet and concealed GI Box complete in all respect as required. |
| 1386 | Supplying, Laying, terminating, testing, commissioning of folowing sizes ofCopper Conductor XLPE insulated, PVC sheathed unarmoured cable 1100 V grade. In existing 40mm PVC Conduit On surface/Recessed the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required. ii) 6 X 2 sq.mm |
| 1387 | i) 6 X 4 sq.mm |
| 1388 | i)16 X 4 sq.mm |
| 1389 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.DSR-2018 1.144 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 1390 | 4 x 10 sq.mm + 2 x 6 sq.mm. earth wire |
| 1391 | 4 x 16 sq.mm + 2 x 6 sq.mm. earth wire |
| 1392 | Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 amps \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1393 | Supply and erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape & aluminium alloy wire braided, jelly flooded & UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc. |
| 1394 | Supply installation testing and commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel for the purposes of fixing of ACB, MCCB & energy meters etc. made out of 2mm thick CRCA sheet, required hardware, 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, indicators, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU / Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangement for equipment / switch gear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber.Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection. (only outer area on all sides shall be measured). |
| 1395 | Supplying and fixing of Copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending , cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect. |
| 1396 | Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect.up to 125A MCCB |
| 1397 | Above 125A to 250A MCCB |
| 1398 | Above 250A to 630A MCCB |
| 1399 | Supply and erection of single phase auto reset Automatic Changeover Current Limiter(ACCL) of capacity 30/ 15 Amp. Complete in all respect including fixing of the same and making necessary connections etc. up to the entire satisfaction of the engineer-in-charge of the work.Make- L&T/Indoasian/Havell\"s/Legrand/C&S |
| 1400 | Supply and erection of PVCpipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. (i) PVCpipe 80 mm dia. |
| 1401 | Supplying, installing on wall or suspension on ceiling, testing and commissioning of following capacity Air Insulated Compact Type Bus Trunking/Rising Main for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints, fire barrier at each floor, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. DSR 3.9200 A Isc = 15kA for 1 second |
| 1402 | 315 A Isc = 25kA for 1 second |
| 1403 | Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required DSR 3.11200 A 15kA SC for 1 second |
| 1404 | 315 A 25kA SC for 1 second |
| 1405 | Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required DSR 3.12125 A 15kA SC for 1 sec |
| 1406 | Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required (Make - Schnedier/EAE/ABB/Legrand)400 A 25kA SC for 1 sec |
| 1407 | 1000 A 50kA SC for 1 sec |
| 1408 | Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Sandwich Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required (Make - Schnedier/EAE/ABB/Legrand)400 A 50kA SC for 1 sec |
| 1409 | 1000 A 50kA SC for 1 sec |
| 1410 | Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Sandwich Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required200 A 25kA SC for 1 sec |
| 1411 | 250 A 25kA SC for 1 sec |
| 1412 | 400 A 35kA SC for 1 sec |
| 1413 | Supply & erection of Air circuit-breaker of suitable ampere rating at 415V, 50Hz, 4 Pole Electrical draw-out type with inbuilt microprocessor based trip sytem with thermal memory, zone selective interlocking, pre trip alarm, individual fault indicating LED, O/C, S/C, Instantaneous & E/F internal protection, Impulse withstand voltage 12kV, rated insulation voltage 1000V, rated operational voltage 690V, fully rated neutral, protection against overload & shortcircuit with setting at 50%-100%- OFF, suitability for isolation as per IEC 60947-2. The ACB should be capable for recording 10 fault history, LCD Display of current & voltage, Icu = Ics = Icw (1 Sec.)= 50kA with no derating upto 50 degree celcius on the existing industrial panel (With terminal adapter on load and line side of breaker), including bondingto the existing earth and making necessary connections with suitable size of thimbles as required by the Engineer-in- Charge at site and as per PWD General Specifications:-Air Circuit Breaker Four Pole, 1000amp.,415volts (Electrical Draw-Out Type) |
| 1414 | Providing Mechanical & Electrical interlocking system between main supply & DG supply MCCBs with suitable rating auxiliary contactor, under voltage coil and other required accessories etc. complete in all respect including fixing of the same and making necessary connections etc. up to the entire satisfaction of the engineer-in-charge of the work. |
| 1415 | Providing Mechanical & Electrical interlocking system between main supply & DG supply ACBs with suitable rating auxiliary contactor, under voltage coil and other required accessories etc. complete in all respect including fixing of the same and making necessary connections etc. up to the entire satisfaction of the engineer-in-charge of the work. |
| 1416 | Supply, fixing & installing of MS floor trunking with cover of following size embeded in floor by cutting the existing floor to be in flush to the existing floor finish level and rendering the floor complete with cement concrete as approved layout complete as required for power/telepone / data in unit of 1 length of2.5 meter each including al accessories to complete job similar to CTM Engg., Slotco, Profab, OBO or equivalent.300 mm X 38 mm - 3 Compartments |
| 1417 | 225 mm X 38 mm - 3 Compartments |
| 1418 | 150 mm X 38 mm - 1 Compatments |
| 1419 | 100 mm X 38 mm - 1 Compartments |
| 1420 | 75 mm X 38 mm- 1 Compartments |
| 1421 | 50 mm X 38 mm- 1 Compartments |
| 1422 | Supply and erection ofG.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size. |
| 1423 | Supply, Erection, Installation & Commissioning of External Lightning Wide Area Protection System based on pro-active Early Streamer Emission (ESE) Technology. No external power source required. Break down time not more than 245.5 Micro second. Wind Resistance up to 120miles/hours. Produces a leader of not less than 2x10E8 V/m/s in the lightning generated electromagnetic field with Level-I protection radius of 79 meters at 5 mtr. Mast including mast for supporting the device. Device confirming to NFC17-102 & UNE 21186 standards & CPRI Tested. |
| 1424 | Supply, Erection, Installation & Commissioning of the Down Conductor which is a 70 Sq. mmflexibile, single core pvc insulated coppercable, complete in all respect up to the entire satisfaction of the engineer-in-charge of the work. |
| 1425 | Supply, Erection, Installation & Commissioning of Lightning Event Counter (Model: LEC-IV) for counting the number of lightning strikes without any power supply. The Counter should be mounted on the Down Conductor and the triggering impulse should be > = 1.5 KA for 8/20µs. The Lightning Event Counter should be robust, non-resettable mechanical counter with IP65 rated enclosure suitable for external application. |
| 1426 | Supply and erection of G.I Chemical earth Electrode consisting of 50mm dia, GI pipe (Medium) ISI marked 3 Mtr. long, G.I. Strip 25mm x5mm of 3 Mtr. long length inside of 50mm dia G.I pipe, 32mm x5mm G.I strip at top for making necessary connections, complete including filling of 2 bags (25 Kg each) of chemical compound, duly sealed at both end caps etc. (Ashlok, Earthify Energy, Gravin Earthing & PCL Make) |
| 1427 | S/E of water cooler of stainless steel body with 150 ltr storage & 150 ltr. cooling capacity (make -USHA) ) with all petty material required the complete job in all respect. |
| 1428 | Solar Water HeatersSupply, erection, testing & commissioning of solar water heating system with following details : |
| 1429 | 1. System capacity : 1000 LPD SUNPOT with Recirculating Pump |
| 1430 | 2. System temperature output : 60 deg. C |
| 1431 | 3. Operating Pressure : Non-Pressurized |
| 1432 | 4. Type of System : FPC |
| 1433 | 5. No. Of Collectors / Tubes : 08 |
| 1434 | 6. Application : Bathing |
| 1435 | 7. Circulation : Non-Pressurized Flow |
| 1436 | 8. Support stands for collectors : MS painted structure |
| 1437 | 9. Tank type : SS 304 |
| 1438 | 10. Tank Sizes : 1000 Ltrs. |
| 1439 | 11. Insulation : PUF/Rockwool / Glasswool insulation |
| 1440 | 12. Brands : NUETECH/ Equivalent |
| 1441 | Supply,Installation ,Testing and Commissioning of Solar Water heateing sysytem of 10000 LPD ouput based on indirect heating system capable to producing specified quantity of water at approx 60 degree C.It should be complete as per detail given below:-: Solar Cu - Cu Flat plat Collector of 2 Sq. mtr. Collector area ( BIS Approved) - 80 Nos.Hot water storage of capcity 10000Ltr made of SS 304 having 5 mm thickness, tank shall be insulated with 100 mm thick glass wool/rockwool insullation with 22 SWG aluminum sheet.Heat Exchanger - Cage/Coil type Internal Heat Exchanger made of SS pipes shall be provided inside the Solar Tank. Heat exchangers shall have min. heat transfer area of 0.24 sq. mtrs. for every 100 LPD calacity.Providing fixing,joiniting,and testing of GI \"B\" class internal system piping to connect solar collectors with hot water storage tank, system piping having insulation with 13 mm Nitril Form insulation covered with UV protected tape.Circulation pump to circulate hot water from collectors to heatexchanger in (1W+1S) manner. |
| 1442 | Electric heater of 30 kw X 3 Nos. with auto cutoff.Ball vale, NRV, to be installed to complete the system.Electrical control panel to control of circulating pumps and electrical heaters2.1 Heat Pump Units (Scroll Type) 45 KwMicro Processor Controlled Eurovent/ AHRI certified aircooled scroll Heat Pump delivering actual capacity as per the following parameters duly installed at site. The Heat Pump should be complete with single hermatic scroll compressors in single refrigerant circuit, Four way reversing valve, Thermostatic Expansion Valve, Air Cooled Condenser coil with Copper tube/ aluminum fins with Axial fans with IP54 protection and stepless fan speed control for condensation control, Braze plate type( SS316) primary heat exchanger with temperature probe for antifreeze protection, anitvibration rubber mounts with factory assembled with Electrical panel mounted on the Heat pump including the disconnect switch suitable for 50 Hz, 3 phase 415 volts,ac supply. The condenser Fans shall have stepless variable speed control for condensation control. The vibration isolators shall be shipped alongwith heat pump from your works. The proposed heatpump should be able to work from -10 Deg C to +40 DegC ambinet temperature for producing Hot Water and should have its defrost cycle. Heatpump to be connected with hot water tank in close loop circuit with the help of PHE (Plate Heat Exchanger) and circulation pump of suitable flow rate & Head.Circulation pump to be connected (1w+1S) configurations. |
| 1443 | LiftsSupply , Installation , Testing And Commissioning of Passenger / Bed / Service Lift system in multistorey blocks . All items to include providing all materials and it\"s assembly at site , labour, T&ps, consumales etc. required at your site as per specification and drawings and directed by Engineer-in-Charge including transit insurance and storage insurance at site till handing over. Supplier shall provide NOC and inspection certificate from the Lift Safty Septt. of Govt. / Statutarry body (Confermingto IS -14665 Specifications) Make- Schnidier/OTIS/KONE/MISTUBISHI |
| 1444 | Car Type - Stainless steel car in hair line finish 1.22 BG, infrared curtain. Door Size- Maximun available in above category of lifts with Ceramic Flooring |
| 1445 | Door operation - Automatic centre / Side opening (as requried) fire rated door with V3F drive. |
| 1446 | Operator Door protection - Continuas full infrared Door Protection |
| 1447 | Other Provisions to be made in each lift :- |
| 1448 | 1) Combined luminous hall button with digital hall position indicator at all floors. |
| 1449 | 2) Integral full height car operating panel with luminous braille buttons , digital car position indicator combined with direction arrows, overloadwarningindicator. |
| 1450 | 3) Standard Electrical fittings of Phillips, Havell’s, Bajaj, Crompton greaves or equivalent. Lux Level 150 |
| 1451 | 4) Voice Floor Announcement System with background music |
| 1452 | 5) Battery operated alarm bell and emergency light. |
| 1453 | 6) Emergency Rescue Device with 15 min. backup as per latest amendment of Haryana State Lift Act. |
| 1454 | 7) Fireman\"s switch at main lobby. |
| 1455 | 8) All cables fittings of standard make from distribution board provided. Face plate finish - stainless steel in hairline finish 1.22 BG face plate shape – rectangular |
| 1456 | 9) Control - A.C. variable voltage variable frequency (with close loop) Operation - Independent IBMS Compatable |
| 1457 | 10) Machine - Gearlessplaced directly above the hoistway with regenaration. |
| 1458 | 11) Car panel- Stainless Steel Panels , SS car door, SS landing door (All Stainless Steel are in hair line finish 1.22 BG) |
| 1459 | 12) Hand Rail - SS hand rail at 900mm all three side. |
| 1460 | 13) Ventilation Fan / Blower |
| 1461 | 14) Fireman\"s switch for eachlift as tire law. |
| 1462 | Above to include supply of mandatory spares & tools for free comprihasive maintenance of 36 months from the date of handing over and obtaining clearances from statutory bodies, any extra steel structure as required at site. |
| 1463 | Passenger Lift for Girls/ Boys Hostel |
| 1464 | Capacity - 13 Persons (Load884 Kg.) Speed- @ 1.5 mps |
| 1465 | Travel (Max.) - G+8 floor (9 Stops /9 Landings) |
| 1466 | Lift Well size as per site |
| 1467 | i)Bed/ passanger Lift for Type-VI |
| 1468 | Capacity - 20 Passenger/1360Kg Speed- @ 0.75/ 1.5 mps |
| 1469 | Travel (Max.) - S+9 floor (10 Stops / 10 Landings) |
| 1470 | Lift Well size as per site |
| 1471 | ii) Passenger Lift for Type-VI |
| 1472 | Capacity - 13 Persons (Load884 Kg.) Speed- @ 1.5 mps |
| 1473 | Travel (Max.) - S+9 floor (10 Stops /10 Landings) |
| 1474 | Lift Well as per site |
| 1475 | Works Details |
| 1476 | i)Bed/ Passanger Lift for Type-VII |
| 1477 | Capacity - 20 Passenger/1360Kg Speed- @ 0.75/ 1.5 mps |
| 1478 | Travel (Max.) - Basement +S+9 floor (11 Stops / 11 Landings) |
| 1479 | Lift Well as per site |
| 1480 | ii) Passenger Lift for Type-VII |
| 1481 | Capacity - 13 Persons (Load884 Kg.) Speed- @ 1.5 mps |
| 1482 | Travel (Max.) - B+S+9 floor (11 Stops /11 Landings) |
| 1483 | Lift Well size as per site |
| 1484 | i)Bed/ Passanger Lift for Type-VIII |
| 1485 | Capacity - 20 Passenger/1360Kg Speed- @ 0.75/ 1.50 mps |
| 1486 | Travel (Max.) - Basement +G+6 floor (8 Stops / 8 Landings) |
| 1487 | Lift Well size as per site |
| 1488 | Works Details |
| 1489 | ii)Passenger Lift for Type-VIII |
| 1490 | Capacity - 13 Persons (Load884 Kg.) Speed- @ 1.5 mps |
| 1491 | Travel (Max.) - B+G+6 floor (8 Stops /8 Landings) |
| 1492 | Lift Well size as per site |
| 1493 | Bed Lift for Hospital Building |
| 1494 | Capacity - 26 Passenger/1768Kg Speed- @ 0.75 mps |
| 1495 | Travel (Max.) - Basement +G+5 floor (7 Stops / 7 Landings) |
| 1496 | Lift Well size as per site |
| 1497 | Freight Lift (Service Lift) for Hospital Building |
| 1498 | Capacity - 2000 Kg Speed- @ 0.5 mps |
| 1499 | Travel (Max.) - Basement+G+2 floor (4 Stops / 4 Landings) |
| 1500 | Lift Well Size as per site |
| 1501 | OXYGEN GASSYSTEMDesign & S/I/T/C of Medical Gas System of following items as per attached Technical Specification & Make:- |
| 1502 | S/I/T/C ofOxygenManifold with 32 Nos. pigtailpipes for 16+16 cylinders and Non-returnvalves, as per enclosed technical specifications - (Indian) (without clyinders) |
| 1503 | S/I/T/C ofFully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK/NFPA99C of USA as per enclosed technical specifications -(Imported) |
| 1504 | S/I/T/C of OxygenManifold Emergencywith 20 Nos pigtails for10+10 Cylinders & Non return valves ,withhigh pressure Regulator,NRV,tailpipes etc. As per enclosed technical specifications -(Indian) (without clyinders) |
| 1505 | S/I/T/C of OxygenOutletswith matchingprobes,asperHTM-2022/02- 01ofUK/NFPA99CofUSAasper enclosed technicalspecifications- (Imported) |
| 1506 | S/I/T/C of Oxygen Flowmeter with Humidfier Bottle New Born CE Certified/UL Listed,as per enclosed technical specifications - (Imported) for critical area |
| 1507 | S/I/T/C of Oxygen Flowmeter with HumidfierBottle,CE Certified/UL Listed,as per enclosed technical specifications - (Imported) |
| 1508 | S/I/T/C of D-TYPE Oxygen Gas Cylinders ISI Mark including first filling as per enclosed specifications (Indian) |
| 1509 | MEDICAL NITROUS OXIDE SYSTEM |
| 1510 | S/I/T/C of N2O Manifoldwith 8 Nos.pigtailpipesfor 4+4 cylindersand Non-return valves,asperenclosed technical specifications - (Indian) (without clyinders) |
| 1511 | S/I/T/C of FullyAutomaticN2O Control Panel, as per HTM-2022/0201ofUK/NFPA99CofUSAasper enclosed technicalspecifications- (Imported) |
| 1512 | S/I/T/C of Nitrous Oxide Manifold Emergencyfor2 Cylinders,withhigh pressure Regulator,NRV,tailpipes etc. As per enclosed technical specifications -(Indian) (without clyinders) |
| 1513 | S/I/T/C of N2O Outlets with matchingprobes,asperHTM-2022/02-01ofUK/NFPA99CofUSAasper enclosed technicalspecifications - (Imported) |
| 1514 | S/I/T/C of D-TYPE N2OGas Cylinders ISI Mark including first filling as per enclosed specifications (Indian) |
| 1515 | MEDICAL CARBON DI OXIDE SYSTEM |
| 1516 | S/I/T/C of Co2 Manifoldwith 4 Nos.Pigtail pipesfor 2+2clyindersand Non-return valves,asperenclosed technical specifications - (Indian) (without clyinders) |
| 1517 | S/I/T/C of FullyAutomaticCo2 Control Panel, as per HTM-2022/0201ofUK/NFPA99CofUSAasper enclosed technicalspecifications- (Imported) |
| 1518 | S/I/T/C of Co2Manifold Emergencyfor1Cylinders,withhigh pressure Regulator,NRV,tailpipes etc. As per enclosed technical specifications -(Indian) (without clyinders) |
| 1519 | S/I/T/C of Co2 Outlets with matchingprobes,asperHTM-2022/02-01ofUK/NFPA99CofUSAasper enclosed technicalspecifications - (Imported) |
| 1520 | S/I/T/C ofD-TYPE CO2Gas Cylinders ISI Mark including first filling as per enclosed specifications (Indian) |
| 1521 | MEDICALCOMPRESSED AIR SYSTEM, |
| 1522 | S/I/T/C of Triplex Compressor complete with Compressedairplant complete along with electrical control panel as per tender specifications fullfilling HTM 2022-02-01/ NFPA99C as per enlcosed technical specifications - (imported) |
| 1523 | S/I/T/C ofAir-4BarOutletswith matchingprobes,asperHTM-2022/02-01ofUK/NFPA99CofUSAasper enclosed technical specifications - (Imported) |
| 1524 | S/I/T/C of Air-7 Bar Outlets with matchingprobes,asperHTM-2022/02- 01ofUK/NFPA99CofUSAasper enclosed technicalspecifications - (Imported) |
| 1525 | MEDICALVACCUMCENTRAL SYSTEM |
| 1526 | S/I/T/C of Triplex Vacuum central system with duplexpump onlycomplete with electrical control panel as per tender specifications as per HTM 2022-02-01/ NFPA99C as per enlcosed technical specifications |
| 1527 | S/I/T/C of Ward Vaccum unitCE Certified / UL listedwith suction jar ( capacity 1/2 Gallon ) and Low suction regulator ( Imported) for critical area |
| 1528 | S/I/T/C of WardVaccumunit with suction jar (capacity 1/2 Gallon)CE Certified /UL listed ( Imported) |
| 1529 | S/I/T/C of Theatre Vaccum Unit (2 jar nos capacity 2 Gallon CE Certified / UL listed (Imported) |
| 1530 | S/I/T/C of VacuumOutletswith matchingprobes,asperHTM-2022/02- 01ofUK/NFPA99CofUSAasper enclosed technicalspecifications- (Imported) |
| 1531 | S/I/T/C of MEDICALGradeBS EN: 13348 Kite Marked COPPER PIPE(Indian) 76mm |
| 1532 | 54mm |
| 1533 | 42mm |
| 1534 | 28mm |
| 1535 | 22mm |
| 1536 | 15mm |
| 1537 | 12mm |
| 1538 | S/I/T/C of MEDICAL AREA LINE PRESSURE ALARM-as per HTM 2022/02-01/NFPA99Casperenclosed technical specifications (imported) Area Line pressure Alarm-2 gases |
| 1539 | Area Line pressure Alarm-3 gases |
| 1540 | Area Line pressure Alarm-4 gases |
| 1541 | Area Line pressure Alarm-5/6 gases |
| 1542 | Master Main Alarm including all Gases |
| 1543 | S/I/T/C of MEDICAL AREA VALVE SERVICE UNIT ( VALVE BOX WITH ISOLATION VALVE) AS PER CE CERTIFIED /UL LISTED AS PER ENCLOSED TECHNICAL SPECIFICATIONS- (Indian) 2 Gases |
| 1544 | 3 Gases |
| 1545 | 4 Gases |
| 1546 | 5/6 Gases |
| 1547 | S/I/T/C of MEDICAL LINE VALVE, AS PER CE CERTIFIED / ULLISTED AS PER TECHNICAL SPECIFICATIONS- (Indian) 22mm OD |
| 1548 | 28mm OD |
| 1549 | 42mmOD |
| 1550 | 54mmOD |
| 1551 | S/I/T/C of Bedhead panel 1500mm length, with provision of Gas outlets & provision with electrical sockets & accessories complete as per enclosed tender technical specifications duly CE Marked (Indian) |
| 1552 | AGSS SYSTEM |
| 1553 | S/I/T/C of Duplex AGSS system (imported) as per HTM-2022/02-01 of UK / NFPA 99C of USA. |
| 1554 | S/I/T/C of Gas outlet for AGSS (Imported) as per HTM-2022/02-01 of UK / NFPA 99C of USA. |
| 1555 | Modular OTS/I/T/C of Pre Fabricated Operating Room Wallof SMS , at per enclosed tender technical specifications- (Indian) |
| 1556 | S/I/T/C of Pre Fabricated Operating RoomCeiling of SMSSMS , at per enclosed tender technical specifications- (Indian) |
| 1557 | S/I/T/C of Laminar Flow (Planair Ceiling )constaructed out of 1.6mm thick aluminum sheet of size 2400x2400mm complete set, as per enclosed tender technical specifications duly CE Marked (Indian) |
| 1558 | S/I/T/C of Peripheral Lightwith dimming, each having 2x36w LED, Electronic Ballast (size :-2\"x1\") complete set, as per enclosed tender technical specifications. (Indian)(Hermatically sealed) |
| 1559 | S/I/T/C of Tile based and membranetypeSurgeoncontrolpanel, mounted flush in the theatre wall, complete setwithelectricalDistributionBoard,as perenclosedtendertechnical specifications. (Indian) |
| 1560 | S/I/T/C of TwinPlateX-ray viewing Screen designed to provide a highlevel of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as perenclosed tender technical specifications. (Indian) |
| 1561 | S/I/T/C of Seamless flooring with perfectly curved fish-covings resistance to mechanical stress and dynamic load and having Electro static discharge (ESD) / (anticonductive)protectioncharacteristics 2mm thick, washable- complete. As per enclosed tender technical specifications. (Imported) |
| 1562 | S/I/T/C of StorageUnitasper enclosedtendertechinicalspecifications. (Indian) |
| 1563 | S/I/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosed tender techinical specifications. (extruded aluminium ) (Indian)each 2100 mmx 1500 mm (height x Width of door frame) |
| 1564 | S/I/T/C of Scrub Sink - 2 bay - made in stainless steel 304 Finish having Sensor & Foot operated with Thermostatic Mixing valve control to maintain the water temperature, Indigenous completed set as per enclosed specification. |
| 1565 | CEILLING PENDNET S/I/T/C of Single Arm Pendant with 1000mm long horizontal arm with horizontal movement only, imported, as per CE Certified / UL Listed, complete set, as per enclosed tender techinical specifications. (Imported) |
| 1566 | S/I/T/C of Double Arm pendant with 800mm+800mm long horizontal arms with horizontal movement only, imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported) |
| 1567 | S/I/T/C of LED OT light european CE Certified and US FDA as per technical specifications.(imported) |
| 1568 | S/I/T/C of PressureRelief Dampers per enclosed tender techinical specifications. (Indian) |
| 1569 | S/I/T/C of Writing Board- asper technical specification (Indian) |
| 1570 | S/I/T/C of Electrical wiring size 1mm wire |
| 1571 | S/I/T/C of Electrical wiring size 1.5 mm wire |
| 1572 | S/I/T/C of Electrical wiring size 2.5 mm wire |
| 1573 | S/I/T/C of 1\"\" PVC Conduting |
| 1574 | S/I/T/C of Low Voltage CAT -06 wire |
| 1575 | S/I/T/C of MS Box for 6 Module |
| 1576 | S/I/T/C of Electrical Plate for 6 Module 2 nos. switch & socket |
| 1577 | HORIZONTAL RECTANGULAR HIGH PRESSURE HIGH VACUUM RADIAL DOUBLE DOOR STEAM STERILIZER, FULLY AUTOMATIC CYCLE OPERATION WITH ACCESSORIES, 432 litres capacity with One No. SS 316 carriage and 2Nos. SS 304 trolley. |
| 1578 | HORIZONTAL CYLINDRICAL HIGH PRESSURE HIGH VACUUM DOUBLE DOOR STEAM STERILIZER, FULLY AUTOMATIC CYCLE OPERATION, 250 Liters capacity |
| 1579 | HORIZONTAL CYLINDRICAL HIGH PRESSURE HIGH SPEED INSTRUMENT STEAM STERILIZER (FLASH STERILIZER),79 Liters capacity |
| 1580 | SS Work Table with Double sink |
| 1581 | Spray Gun Rinser with Eight Attachments |
| 1582 | Washer Disinfector with inbuilt drier, Double Door, 275 litres |
| 1583 | Ultrasonic Cleaner, 30 litres |
| 1584 | SS Control & Packing Table |
| 1585 | Gauze cutting machine with table |
| 1586 | Continuous band sealers with SS table |
| 1587 | SS pass box |
| 1588 | SS Table trolley with two shelf |
| 1589 | SS Storage racks with five shelves |
| 1590 | ELECTRICAL ISOLATION PANELS FOR OTDesign, fabrication, assembling, wiring, supply, installation, testing and commissioning of 12KVA Medical Isolation Panel for OT\"s fabricated out of 16 gauge CRCA sheet steel incubicle compartmentalized wall mounted, dust and vermin proof as per IEC61439 with glazed door. OT panel board shoud include insulation monitoring device. As per IEC 60364-7-710 & Protection from electromagnetic disturbances, in accordance with IEC 60364-4-44 and IEC 61000-6-2 and -3. |
| 1591 | 1 No. TRANSFORMER 10kVA Type Tested IEC 61558 |
| 1592 | 1 No. Insulation Monitoring Device |
| 1593 | 1 No. Audible and visual alarm Devicefor an insulation or electrical fault |
| 1594 | MAIN INCOMER |
| 1595 | 2x Switch-disconnector, Interpact 4P, 63 A |
| 1596 | 1 Nos. Automatic change over Switch |
| 1597 | TNS Earthing Zone |
| 1598 | 4 Nos. 16A 2P 10KA MCB\"s. |
| 1599 | 4 Nos. 16A 2P 30ma RCCB\"s. |
| 1600 | IT Earthing Zone |
| 1601 | 12 Nos. 16A 2P 10KA MCB\"s. |
| 1602 | 12 Nos. Sensors/CT\"s |
| 1603 | 1 Nos. Insulation Fault detectors (12 channel) |
| 1604 | Note: |
| 1605 | All RCCB shall be of SI-type. |
| 1606 | All MCB’s shall be minimum of 10 KA breaking capacity & ‘D’ curve only. |
| 1607 | All incoming and outgoing feeders cubical shall be 100% segregated/ isolated. |
| 1608 | Isolation Panel (For OT) described as above |
| 1609 | UPSS/I/T/C of UPS of suitable capacity as per OT load but minimum 10 KVA with 30 minutes backup for all OTs and reduntancy( n+1) should switch automatically. The battery bank may be common for UPS. For eg. there are 4 MOT, the USP should be 10KVAx4 and one 10 KVA as standby for all OTs as per required specification,complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make- Schnider/ Alton/ Delta |
| 1610 | HOSPITAL MANAGEMENT SYSTEM Design, Develop, Integration, Deployment, Implementation and Maintenance of Hospital Management System as per tender specification Make TCS// Tenwave/ Wipro/ Infosys /Cerner/ allscripts |
| 1611 | S/I/T/C of Minimum 16 Physical CPU Cores (Additional Virtual Cores Through Hyper-Threading Preferred),64 GB RAM DDR4, 2 x 250 GB SSD + 5 TB 600GB SAS 10K SFF SC DS HDD+, Integrated Intel® i219- V Ethernet LAN 10/100/1000 Make HP/DELL/ LENOVO |
| 1612 | S/I/T/C of All-in-One PC (Celeron J4005/4GB/1TB HDD/Window /Intel UHD 600 Graphics), or equivalentThin client with Latest Browser Make HP/DELL/ LENOVO |
| 1613 | S/I/T/C of Laser Printer -Print speed 14 PPM(ISO), Up to 600X 600X2 DPI(1200DPI), -Duty cycle 5000 pages, High Speed USB Make HP/Canon |
| 1614 | ELECTRONIC Patient Flow Management (EPFM)SITC of Electronic Patient Flow Management (EPFM) Application as following specification. Make: TCS/Tenwave/Cerner/ Q-nomy Inc/ Wipro |
| 1615 | SITC of Integration with Electronic Management System ‘s Appointment module based on Mobile/Web Portal as per following specification including licence Key of Software. Make: TCS/Tenwave/Cerner/ Q-nomy Inc/ Wipro |
| 1616 | 2.1 Web Portal |
| 1617 | · Provide secure portal accounts for patients |
| 1618 | · Pre registration to entered demographic details and it should be available to the hospital registration staff when the patient visits the facility. |
| 1619 | · Provide the Patient Registration online option |
| 1620 | · View the medical records of the existing patients of the hospital. |
| 1621 | · Tobook, reschedule and cancel appointments |
| 1622 | · To view the past visit history |
| 1623 | · To view active medications |
| 1624 | · To view lab results and history. |
| 1625 | · To make payment of registration ,tests, Student fees etc. throgh payment gate way. |
| 1626 | 2.2 Mobile App |
| 1627 | · ProvideAppointment booking/Rescheduling |
| 1628 | · Provide the Laboratory Report downloadoption |
| 1629 | · Provide the Document Upload Option |
| 1630 | · Provide On line payment option |
| 1631 | · Mobile Application will be developed considering easy to use. |
| 1632 | · Mobile Application flow shall be patient centric and provide user to maintain the full family record using single login. |
| 1633 | · Mobile application will be provide the OTP /Password based login. |
| 1634 | · Mobile based (compatible with iOS and Android) solution and Web Portal will be supported with Single application Server. |
| 1635 | Healthcare Patient Engagement Solutions shall also be linked with Electronic Management System’s to fetch the Doctor Schedule, Appointment, Lab Reports etc. |
| 1636 | · To make payment of registration ,tests, Student fees etc. throgh payment gate way. |
| 1637 | Works Details |
| 1638 | SITC of Server – Xeon Processor (quad core) with 16 GB channel DDR4 SDRAM memory, 1TB HDD , Integrated Intel® i219- V Ethernet LAN 10/100/1000; Make: DELL/ HP (MR) |
| 1639 | SITC of full HD 55” LED smart T.V Make: Sony, Samsung, Panasonic |
| 1640 | SITC of full HD 40” LED smart T.V Make: Sony, Samsung, Panasonic |
| 1641 | SITC of 18\" touch screen self-service Kiosks with Floor mounted/ePFM Kiosk , Thermal Printer with auto-cutter (80 mm X 58 mm) and required interfaces & power supply. Make: TCS/ Tenwave Q-Nomy (MR) |
| 1642 | Healthcare Patient Engagement Solutions (HPES)SITC of Web Portal Development and Installation for Patient Management as following specification. Make: TCS/ Tenwave/cerner NextGen Healthcare/IICONS/ Wipro |
| 1643 | SITC of Mobile App ( Android and IOS Support) as per following specification.Make: TCS/ Tenwave/cerner NextGen Healthcare/IICONS |
| 1644 | UPS SYSTEMSupply, unloading, installation , testing & commissiong of micro processor / DSP controlled 120 KVA, IGBT based rectifier to achieve THDI <3% and input power factor 0.99 at 50%-100% loading, Built-inDelta Star Isolation Transformer at inverter output before static switch,True Online Double Conversion (VFI as per IEC 62040-3) UPS usingPWM IGBT technology , 3 Phase input and 3 phase 415 V output UPS system; and each comprising of the following: |
| 1645 | 100% rated Inbuilt static switch at the invertor output . 100% rated Inbuilt static switches at the static bypass line. |
| 1646 | 100% rated Inbuilt Maintenance Bypass. |
| 1647 | Soft Start 0-100% in 120 Second(Selectable) |
| 1648 | Built-in Phase sequence protector & corrector( UPS should not go on bypass/battery bank if the phase are reveresd)& Back feed Protection |
| 1649 | Voltage Distotion - <1% on linear & <3% on Non linear load |
| 1650 | Input Voltage Range- +/- 20% |
| 1651 | Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments. |
| 1652 | Lead Acid sealed maintenance free 12V, batteries for 120 KVA ystem, for providing 10-15 minutes backup to 120 KVA UPSThe bank of batteries shall comprise required Nos of batteries. 12V/120AH/40 Nos including matching cabinet/open racks to house SMF batteries for 120 KVA UPS system along with interconnecting links, MCCB etc. complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. Make: Schnider/ Elton/ Delta |
| 1653 | Integrated Building Management System (IBMS) |
| 1654 | Supply,Installation,testing and commissioning of IBMS & allied works as detailed below and as per specifications:(approved Make: Siemens/Honeywell/Schneider/Tridium/ EASYIO-JOHNSON) |
| 1655 | Central Works Station : |
| 1656 | Intel Pentium IV machine with 2.4 GHz speed, 16 GB RAM 160 GB HDD, Multimedia extenal modem as per specifications this should be server base suitable for data points as required |
| 1657 | Colour Monitor SVGA - 22 inch |
| 1658 | 132 column 240 CPS printer (Alarm and report) |
| 1659 | Mouse |
| 1660 | UPS with 20 minutes battery backup |
| 1661 | Software and System Interface Units : |
| 1662 | Supply,Installation,testing and commissioning of the following Web Based software with built in protocols MODBUS (TCP/IP)/ BACNET/KNX/ OBIX/ SNMP-LONfor BAS as per specifications. Developing,testing and commissioning of the software for the building automation system along with unlimited user license. |
| 1663 | Providing all necessary software and hardware for the interface of the following system/equipment including providing necessary integrators/modules (RS-232/ RS-485modbus Bacnet/Lonworks output to be provided by other vendors) Chilling Machines |
| 1664 | DG sets (2 No. 250 KVA + 1no. 500 KVA + 2 Nos 1000 KVA) |
| 1665 | Electric Pump |
| 1666 | UPS system |
| 1667 | LT -ACV Breakers |
| 1668 | Lifts |
| 1669 | Diesel Pump |
| 1670 | Jocky Pump |
| 1671 | Primary Pump |
| 1672 | Secondary Pump with VFD |
| 1673 | Condensor Pump |
| 1674 | Transformer (2500 KVA) |
| 1675 | Cooling Tower |
| 1676 | Supply,Installation,testing and commissioning of Web based energy auditing softwarware for data management and analysis should have pre-designed reports ,accessible from anywhere via an internet browser and able to seamlessly integrate into the building automation system |
| 1677 | Supply,Installation,testing and commissioning of following controllers as per the specifications: Standalone intelligent with built in protocols MODBUS/ BACNET/KNX/ OBIX/ SNMP-LON controllers with 32 bit microprocessor, real time clock and EEPROM asper the specifications. The controller shall be housed in a vandal proof, lockable and secure MS cabinets to besupplied along with controllers. |
| 1678 | Web Based system interface modules consisting of gateways, other interface units as required as per specifications. The unitsshall be housed in vandal proof lockable and secure wall mounted MS cabinets to be supplied along with the controllers. |
| 1679 | Hand Held Portable Operator Terminals / TABLET |
| 1680 | Sensors and Field Devices |
| 1681 | Supply,Installation,testing and commissioning of the following sensors/transmitters/transducers/ field devices as per the specifications:-Immersion type temperaure sensors for measuring chilled water supply and return temperature in theRange 32F-160F |
| 1682 | Duct type temperauture sensor for measuring supplyair temperature at the AHUs of the(Range 45F-150F) |
| 1683 | Out side air temperature and RH sensor for measuring the outsideair temperature (35F-130F) and humidity |
| 1684 | Pressure transmitter for measuring pressure inwater supply and return headers (0-10Kg/m2) |
| 1685 | Electromagnetic type flow meters for following chilled/hot water supply and return main header 600 mm dia pipe |
| 1686 | 450mm dia pipe |
| 1687 | 150mm dia pipe |
| 1688 | Differential Pressure switch across the Air Handling Unitsindicating the filter status (pressure differential 2mm-15mm) |
| 1689 | Differential Pressure switch across the AHU/Fan sectionsfor indicatingthe fan status of pessure differential range 10mm-50mm. |
| 1690 | Level switches for indicating water levels in sumps and tanks. |
| 1691 | Differential Pressure switch for pumps status |
| 1692 | Room Temperature + RH Sensor |
| 1693 | Flame Proof Level Switches for DG Tanks |
| 1694 | Modulating typer Damper Actuators - 5 Nm |
| 1695 | CO2 Sensors |
| 1696 | Occupancy Sensor for controlling of VAV Boxes |
| 1697 | VFDs |
| 1698 | Supply,Installation,testing and commissioning ofthe following Variable Frequency Drives for the AirHandling Units and Cooling Towers as per specificationsIP/ RS 485 Protocol for seamless integration with IBMS- (Approved Makes : Danfoss/ABB/Siemens) |
| 1699 | 15.0-20 HP motor |
| 1700 | 12.5 HP motor |
| 1701 | 10 HP motors |
| 1702 | 7.5 HP motors |
| 1703 | 5 HP motor |
| 1704 | 3 HP motor |
| 1705 | VAV Boxes |
| 1706 | SUPPLY, Installation,TESTING & COMMISSIONING OF Variable Air Volume Boxes VAVs shall be pressure independent type & low velocity type, cooling only VAV Boxes shall be slow reacting type capable of delivering variable air volume type by the action of opposed bade dampers.These shall be supplied with end flanges for attachment to flanged duct ends and shall have internal accoustic treatment shall be in double skin GSS construction and completely sealed, easily removable. The access shall be provided in the bottom side only. |
| 1707 | VAV shall be electronically controlled networkable controller type complete with low leakage damper actuator,microprocessor unit,wall/ceiling mounted temperature sensor with on/off switch control transformer unit handler bracket |
| 1708 | VAV Boxes shall also be able to reset any air flow between zero and the max. air quantity that the boxes can handle without changing orifices or other parts |
| 1709 | Each VAV Shall be supplied with one operating switch in the related rooms, which shall chnge the temperature setpoint of VAV including cost of wall switch. |
| 1710 | The quoted price shall be inclusive of the temperature sensor for each VAV unit & associated internal cable required for proper functioning of the VAV Boxes. |
| 1711 | The temperature sensor and the entire control mechanism shall be fully campatible with IBMS.Data like temperature,setpoint and damper position shall be monitored thru IBMS system with Bacnet / Modbus IP protocol- (Approved Make : Trox/Balcolair/Titus/Belimo) |
| 1712 | The capacities of the units as per specification are as follows |
| 1713 | 0 - 800 CFM |
| 1714 | 801 - 1350 CFM |
| 1715 | 1351 - 2100 CFM |
| 1716 | 2101 - 3200 CFM |
| 1717 | 3201 - 4000 CFM |
| 1718 | 4001 - 8000 CFM |
| 1719 | Differential Pressure Sensor |
| 1720 | Ventury Valves |
| 1721 | Supply,Installation,testing and commissioning of venturi valves based airflow as per air flows as mentioned below.The system shall comprise of one supply and oneexhaust valve operating as tracking pair.The valves shallhave provision to communicate to IBMS over bacnet/lon/ Modbus IPprotocol.The valve shall control the airflow within 5% of desiredair flow The valve shall also monitor and control the temperatureas set from the room unit.To maintain a comfortable temp in theroom without compromising the air flow requirement of the room. The capacities of the units shall be as follows . |
| 1722 | The room display shall provide to display the supply and exhaust air in the room and also allow the change to offset in the supply and exhaust air flow.The display shall also display the temperature in the room. |
| 1723 | 1000-1200 cfm(for isolation ward) |
| 1724 | 3000 cfm(for Opration Theatre) |
| 1725 | (Approved Make: Phoenix Control/Siemens/Honeywell) |
| 1726 | Cable & Conduits |
| 1727 | Supply,Installation,testing and commissioning ofthe following cables as per specifications : |
| 1728 | Signal cable ( 2 x 1.5 Sq. MM., stranded tinnedCu conductor, flexible,PVC sheathed type |
| 1729 | Communication cable ( 2 x 1.5 Sq. MM., stranded tinned Cu conductor, flexible,PVC sheathed, Shielded type |
| 1730 | Conduits : |
| 1731 | Supply,Installation,testing and commissioning of the following conduits for running cables as per specifications : |
| 1732 | M.S. Conduit for signal cable (25 mm) |
| 1733 | M.S. Conduit for communication cable ( 20 mm) |
| 1734 | GS Trunking |
| 1735 | Supply,Installation,testing and commissioning of2 mm thick galvanised steel trunking of the following complete with angle iron support/hangers etc. as per the specifications. |
| 1736 | 40x300x40 mm |
| 1737 | 40x300x40 mm |
| 1738 | 40x150x40 mm |
| 1739 | NURSE CALLING SYSTEMSupply, Installation & commisioningof Head Nurse control panel as a central management :The all patient Bed or Nurse Station shall be connected to Head Nurse control panel central management system at Head Nurse office. The control panel shall comprises oftouch screen LC colour graphic display for displaying all details suchas call queue system , priority systems for emergency calls , texting between the panel , callorientation -Night service mode to redirect calls to another panel. The system shallable tobuild a priority depending on the call type and display them on monitor. All calls ,emergency calls , toilet-bathroom and visiting nurses, can be tracked on the panel and remote access.The system shall display the exact location of the calls. The system shll have facility to connect with smart phones so that one can track calls on their smart phone and even make Voip calls. Make:-Rauland borge/Ge/Hampton |
| 1740 | Supply, Installation & commisioningof Nurse Station Terminal :Nurse Station shall comprises oftouch screen LC colour graphic display for displaying all details , Querying receiver for speaking discretely, Microphone and loudspeaker for hands-free speech (incl. volume control), full duplex speaker phone in brilliant sound quality & inbuilt microphone . The Nurse station shall be able tocommunicate to room , other nurse station. The Nurse station shall have access to patient information , in case of emergency shall have facility to jump as many calls to other Nurse station.. All call indications follow the priority and must display the exact location of the calls. The system shall be able to configure with N number of bed for nurse station. In case of limitation for configuration , the system or its combination of system unit shall be able to configure atleast 40bed in any scenerio .The system shall be self sufficient to share data tocentralNurse management station. Make:-Rauland borge/Ge/Hampton |
| 1741 | Supply, Installation & commisioningof Room Control Terminal/Mini Nurse station :Room Control Terminal/Mini Nurse station shall comprises oftouch screen LC colour graphic display for displaying all details (Active /offline call). The system shall able todo internal & externalcall or conference call , full duplex speaker phone in brilliant sound quality & inbuilt microphone . The Room control terminal / Mini Nurse station shall be able tocommunicate to own or other nurse station, hospital stff , code blue and other custom emergency codes through an on screen menu. Patient information from HIS (Hospitalinformation system ) can be monitored on the server system through the corresponding bed icon on screen. If desired the information about the patient can be edited through the touchscreen. The system shall be self sufficient to share data tocentralNurse management station. Make:-Rauland borge/Ge/Hampton |
| 1742 | Supply Installation Testing & Commissioning of LED Indicators Module at Outside of each ward with ecofriendly Leds . It shall warn with three main colour red , green , blue, and combinations of these depending on the call status of the roomcomplete as required. Make:-Rauland borge/Ge/Hampton |
| 1743 | Bedside Call Cancel Buttonshall consist of:Supply Installation Testing & Commissioning of Bed side Call & Cancel Push Button, Call Reset, Call Indication in Nurse station for each Bedcomplete as required. Make:-Rauland borge/Ge/Hampton |
| 1744 | Patient handset with speech shall consist of:Supply Installation Testing & Commissioning of Patient handset with sppech. The patient shall be able to speakdirectly to nurse assigned to them. The handset shallbe full duplex and shall be able tocontrol function within the room through BMS such as lighting , window blinds. the patient shallable to change TV channeland controlvolume. complete along with module & accesoriesas required for installation. Make:-Rauland borge/Ge/Hampton |
| 1745 | Patient handset without speech shall consist of:Supply Installation Testing & Commissioning of Patient handset without sppech. The patient shall be able to inform to nurse . The handset shallbe full duplex and shall be able tocontrol function such ascontrolroom light, reading lamp , window blinds. the patient shallable to change TV channeland controlvolume.complete along with module & accesoriesas required for installation.Make:-Rauland borge/Ge/Hampton |
| 1746 | Pull cord for WC & Bathroom shall consist of:Supply Installation Testing & Commissioning of Toilet Call Push Button with LED indication and flexiable cord with button , Call Reset, Call Indication, station for each WC unit complete as required. Make:-Rauland borge/Ge/Hampton |
| 1747 | Code Blue unit /Doctor call unit shall consist of:Supply Installation Testing & Commissioning of code blue unit consisit of Nurse call to Nurse station & code unit to callcode blue team with Call Push Button with LED indication , Call Reset, Call Indication, station for each patient room complete as required. Make:-Rauland borge/Ge/Hampton |
| 1748 | Mifare Card:-Supply of Mifare card for Nurse so that we can have certain data.a. The Nurse who have attended the patient.b. Authorization to fill data in room control unit.C. The duration she took to attend patient. Rauland borge/Ge/Hampton |
| 1749 | Supply, Installation ,& commisioningof The Central Monitoring Unit The Central Monitoring Unit shall be webbased monitored that shall observes all activities such as nurse calls, code blue (and any custom emergency codes), assist calls, and nurse presences throughout the hospital. It shall show picture IDs of personnel that are present in patient rooms. Different parameters (call type, department, and floor info) can be filtered based on needs. In this way, the focus of health personnel can be directed and reaction and intervention times can be minimized |
| 1750 | FIRE FIGHTING INTERNAL (HSR)25.3) Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications.25.3.4) 150mm dia. |
| 1751 | 25.3.6) 100mm dia. |
| 1752 | 25.3.7) 80mm dia. |
| 1753 | 25.4) Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.25.4.2) 150mm dia. |
| 1754 | 25.4.4) 100mm dia. |
| 1755 | 25.4.5) 80mm dia. |
| 1756 | FIRE FIGHTING INTERNAL (NS + DSR)4) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-\"F\" insulation, conforming to IS-325. b) Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, ACsupply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-\"F\" insulation, conforming to IS-325. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.4.1) 900 lpm at 35 m Head |
| 1757 | 4.2 ) 450 lpm at 35 m Head |
| 1758 | 7) Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :7.1) 25 mm dia |
| 1759 | 7.2) 32 mm dia |
| 1760 | 7.3) 40 mm dia |
| 1761 | 7.4) 50 mm dia |
| 1762 | 7.5) 65 mm dia |
| 1763 | 7.6) 80 mm dia |
| 1764 | 7.7)100 mm dia |
| 1765 | 7.8) 150 mm dia |
| 1766 | 9) Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : (9.1) Single headed Gunmetal |
| 1767 | 13) Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 1768 | 16) Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 1769 | 17) Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.(17.1) 30 m |
| 1770 | 18) Supplying & fixing 63 mm dia gun metal short branchpipe with 20 mm nominal internal diameter size nozzleconforming to IS 903 suitable for instantaneousconnection to interconnect hose pipe coupling asrequired : 18.1 Gun metal |
| 1771 | 19) Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 19.1 |
| 1772 | 20) Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air releasevalve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 1773 | 21) Providing, fixing, testing & commissioning of 15mm diaquartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :21.1) Pendent Sprinkler |
| 1774 | 21.2) Upright Sprinkler |
| 1775 | 21.3) Horizontal side wall sprinkler |
| 1776 | Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required. (23.1) 100mm dia |
| 1777 | 23.2) 150mm dia |
| 1778 | 25) Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 25.3 1200mm |
| 1779 | 26) Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 26.3 100mm dia |
| 1780 | 27) Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required. |
| 1781 | (16.7 (E&M)DSR )Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 1782 | Fire Hydrant Valve, Double headed, Gunmetal, IS:318-LTB2 Grade, 100mm N.B Flanged inlet, Brass Spindle, 02 individually controlled 63mm Female Instantaneous Oblique Outlet, Complete with PVC Blank Cap & GI Chain, Bearing IS:5290 Mark, Flange O.D.220mm, PCD 180mm, Eight 19mm Dia Holes |
| 1783 | Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet |
| 1784 | Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE |
| 1785 | Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h)with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating |
| 1786 | Fabricating ,supplying, installation, testing and commissioning of suitable size outdoor floor mounted compartmentalized cubicle panel ,fabricated from 2 mm thick CRCA sheet with sloped roof and partitions with stiffeners whenever required dust and vermin proof, powder coated of approved shade after seven tank process with suitable electrolytic grade high conductivity copper bus bar, suitable operation on 3 phase 415V, 50Hz AC supply.Incoming Suction: i) 63 Amps FP MCCB 25 KA (lcs) panel mounting type-1 no.ii) 0-63 Amps. Digital Ammeter with CTs-1 setiii) 0-500 Volts Digital Voltmeterand protection fuses-1 setiv) 100 Amps, 4 strip copper bus bars of suitable length - 1 set v) Phase indicating lamps with control switch and protective fuses-3 nos.Outgoing suction:i) Terrace pump section comprising of 32 Amp 25 KA (lcs) TPMCCB panel mounting type,1 no. DOL starter with OL and UV protection. Current sensing types single phasing preventer, indication lamps,ON/OFF push button, auto manual selector switch, ammeter with selector switch ,ammeter with selector switch and CTs, necessary inter locks complete suitable for automatic operation etc. as required-1 set(start& stop push button fround floor-1 set)ii) Control section having control components integrating the terrace pumps so as to satisfy the functional requirements visual/audio alarms, necessary instrument , indicating lamps, push buttons, fuse terminal blocks atc. and other accessories as per specification-1 set (for one pumps) (CPRI APPROVED Panel). (NS item) |
| 1787 | FIRE EXTINGUSHERProviding and fixing of 4.5 kgs capacity CO2 gas type ISI marked fire extinguisher IS:15683 complete as requiredcomplete in all respect with the entire satisfaction of Engineer-In-charge. (Make:Omex/Lifeguard/ Safex). |
| 1788 | Providing and fixing of 6 kgs capacity ABC stored pressure type ISI marked fire extinguisher IS:15683 with 90% MAP powder complete in all respect with the entire satisfaction of Engineer-In-charge. (Make:Omex/Lifeguard/ Safex). |
| 1789 | Co2 type Fire Extinguisher 9 Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved Make: SAFEX / Omex/ Lifeguard |
| 1790 | Dry Chemical Powder type 50 kgs. capacity Fire Extinguisher, Phosphate and Epoxy powder coated Bearing ISI Mark IS: 16018 : 2012 fitted with gunmetal cap, safety valve,hose with ABS squeeze grip nozzle, mounted on rubber tired wheels, initial charge of 50 kgs. Sodium – bi – carbonate base Dry Chemical Powder & fully charged Co2 cylinder. Dry Powder as per IS: 4308. Bearing ISI Mark: Co2 Cylinder approved by Explosives Dept. Extinguisher body as per IS: 2062. Gunmetal cap as per IS: 318. Valve as per IS 3224 Bearing ISI Marked. Siphon tube as per IS: 1239. Tested to 30 kgf/cm2 for 2 minutes Make: SAFEX / Omex/ Lifeguard |
| 1791 | 10 kgs. Ceiling Mounted Fire Extinguisher Clean Agent FE- 36, Zero ODP, fabricated from EDD CR Sheet sheets fitted with brass forged sprinkler assembly incorporated with pressure gauge, initial charge of 10 kgs. HFC 134 A GAS and pressurized with nitrogen gas at 14 kgf/cm2M.S. Body as per IS: 513. Forged sprinkler head body as per IS: 319. Filled weight of extinguisher 20 kgs. The sprinkler body will comprise of temperature sensitive quart soid bulb of temperature rating of 68°. Make: SAFEX / Omex/ Lifeguard |
| 1792 | Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate sizeincluding fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. Make : Trlacote/ Safex/ Omex |
| 1793 | HVAC HSR PART Supplying, fixing, testing and commissioning of condenser water pipes/ non insulated chilled water pipes of following sizes of MS \"C\" class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. HSR 25.1300 mm NB |
| 1794 | 250 mm NB |
| 1795 | 200mm NB |
| 1796 | 150mm NB |
| 1797 | 125 mm NB |
| 1798 | 100 mm NB |
| 1799 | 80 mm NB |
| 1800 | 65 mm NB |
| 1801 | 50 mm NB |
| 1802 | 40 mm NB |
| 1803 | BUTTERFLY VALVES - (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring, PN 16 pressure rating for chilled water / Hot water circulation as specified 25.3300 mm NB |
| 1804 | 250 mm NB |
| 1805 | 200 mm NB |
| 1806 | 150 mm NB |
| 1807 | 125 mm NB |
| 1808 | 100 mm NB |
| 1809 | 80 mm NB |
| 1810 | 65 mm NB |
| 1811 | 50 mm NB |
| 1812 | 40 mm NB |
| 1813 | Non Return Valves -With Dual Plate Of C.I. Body, Ss Plate, Vulcanized Nbr Seal Flanged End & Pn 10 Pressure Rating As Specified 25.4150 MM NB |
| 1814 | 125 MM NB |
| 1815 | Supply, Installation , Insulation , Testing And Balancing Of Insulated Double Regulating Manual Balancing Valves As Per P&I Diagram 25.5200 mm NB |
| 1816 | 150 mm NB |
| 1817 | 125 mm NB |
| 1818 | 100 mm NB |
| 1819 | 80 mm NB |
| 1820 | 65 mm NB |
| 1821 | 50 mm NB |
| 1822 | 40 mm NB |
| 1823 | Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for Condenser/hot water circulation as specified. 25.6200 mm NB |
| 1824 | 125 mm NB |
| 1825 | AIR DISTRIBUTION NETWORKSupply and installation of GI, factory fabricatedrectangular ducts, complete with MS flanges and bracing (as specified), necessary supports using thread roads (as directed) and anchor bolts, supply air collars, vanes, splitters dampers duly painting of the ducts and as per specification for Air Conditioned Areas 25.718 G |
| 1826 | 20 G |
| 1827 | 22 G |
| 1828 | 24 G |
| 1829 | WATER COOLED SCREW CHILLERS - VARIABLE SPEED |
| 1830 | Supply, installation, lifting-shifting at site, testing & commissioning and field performance of water cooled screw type water chilling machines with VFD Starter having designed capacity of 400 TR comprising of semi hermetic screw type screw compressors with refrigerant circuits, step less capacity control, direct driven refrigerant cooled motor, suitable for operation on refrigerant R-134a or equivalent green CFC and HCFC free refrigerant with necessary drive arrangement comprising the following complete as per specifications and as required. Manufacturing Source: (Non Chinese Product)Semi-hermetic screw compressors complete with step less capacity control, safety switches, forced feed lubrication system etc. as per specifications. Chiller shall be capable for running at low load condition till 15%.Suitable Nos & suitable capacity induction motor with class \"B\" insulation suitable for operation on 415 volts ±10%, 50 Hz, A.C. supply.VFD Shall be with harmonic Filters with less than 5% THD. Compressor motor complete with ammeter with CT\"s, over load protection, under voltage protection, protection against phase reversal & independent single phase preventer etc. complete as required. Power Factor of chiller shall be 0.95.Chiller shall be done proper acoustics and shall not exceed the sound pressure of 77 dbA at full load at 1M. Supplier should not exceed the sound level on part load conditions as given in technical specifications. |
| 1831 | Matching shell and tube water cooled condenser of C.S. shell and integrally finned copper tubes having multi passes.- 1 Nos. Supplier to provide matching flanges.Matching shell and tube flooded type chiller for screw type units of CS shell and copper tubes having max. Multi passes - 1 Nos. Supplier to provide matching flanges.Refrigerant piping fittings, valves, Expansion valves and accessories to inter connect compressor, condenser, chiller and expansion valve etc. complete as per specification as required.Supplier must provide necessary junction box as electric supply from the source will be provided in Al cable.Microprocessor based control panel shall have suitable hardware & software so that it can be integrated directly to with standard communication open protocol using bacnet / Modbus as well as open IP.Refrigerant line accessories comprising of safety valves, angle valve, liquid line indication, liquid level control etc. complete as per specifications as required.Water drain & air purge valves wherever required as per specifications.Chiller shell insulation with minimum 19 mm thick nitrile rubber insulation. |
| 1832 | Frame work for mounting the above condenser, chiller, compressor and motor with base plate complete with ant vibration springs isolator as per OEM standard etc. Initial/ first charge of refrigerant gas & compressor oil complete as per specifications as required.The minimum COP and IPLV at AHRI conditions shall be 5.4 and 9.0 respectively. AHRI certified performance sheet shall be submitted with the offer.The charges for the above 400 Tr x 1 No.chiller eye witness tested at AHRI certified test bed in OEM factory for 4 load points at (100%, 75%, 50%, 25%,) the cost of the agency/ firm. The machine shall be accompanied with the 4 point test report duly certified by the OEM. No payment shall be released without the same. The maximum IKW/TR should not exceed 0.66 & NPLV 0.37 KW/TR at site condition. Supplier should comply the part load technical details as given in specifications. |
| 1833 | 400 TR at following duty pointChilled Water TemperatureIN/OUT: 6.67 Deg C / 12.22 Deg cEvaporator Fouling factor: 0.0005 FPSChilled Water Circulation Rate : 960 USGPMCondenser Water Temperature IN / OUT : 32.2 Deg C / 37.7 Deg cCondenser Fouling factor : 0.001 FPSCondenser Water Circulation Rate : 1640 USGPM(3 Working + 1 Stand By) |
| 1834 | Microprocessor based control panel comprising of Controls including sensors, factory manufactured and tested. All Control function including start up and shut down leaving chilled water temperature Control, Compressor and Electronic Expansion Valve modulation, anti-re-cycle logic, automatic Compressor and load limiting. It shall also be equipped with the following protection and monitoring devices.High (Condenser) & Low (Evaporator) pressure protection.Low oil level & pressure protection.Chilled/Condenser Water flow loss.Chiller Water Freeze protection.Sensor error protection.Motor load control and overload.High motor temperature protection.High oil temperature protection.Chiller inlet and outlet Water temperature.Condenser inlet / discharge Compressor pressure.Suction and discharge Compressor pressure.Current in each phase of Compressor, Motor. |
| 1835 | Chiller Plant ManagerSupply, installation,testingandcommissioningofChillerPlant manager including Scada System for the complete operation of Chiller with inclusion of necessary hardware and software and integrated and clubbed with Building management system including all cabling and necessary accessories required for integration for smooth operation of Chiller plant.Master controller is for integratedoperation of 4 sets of chillers, 4 sest of PCHW & 4 sets of CW pumps and 4 sets of Cooling towers - as per Design annexure. |
| 1836 | Electrical Hot Water Generator |
| 1837 | Supplying, installation, testing and commissioning of 350 KW electrical hot water generator complete with electrical panel, controls, immersion heaters and insulation etc. as per specification and requirements. |
| 1838 | Vertical Type( As per manufacturer standard)M.S.Body 8 mm shell 10 mm Dish ends Top Openable with thick M.S. flat plate and sufficient number of Nut BoltsHeating Elements should be Electric Resistance Immersion type, copper tube chromplatedInlet out let50 mm Pipe Flange Ends.Capacityin multiple steps i.e. in4 bankTest Pressure 17 KG / cm2Internally inbuilt Electric Panel consist of 3 phase incomer MCB, steps controller, contactors foreach heater with single pole MCB duly factory wired.Conrolscomprising of Step controller for heaters pressure Gauges with Ball Valves , Pressure relief valve, Low water Level cutout / high Temperature cutout ,sight Glass and Auto air ventInsulation 50 mm thick Resin Bounded Fiber Glass wool cladded with 0.5 mm Aluminim Sheet. M.S. Frame welded to the Hot Water Generoator\"s Body |
| 1839 | 350 KW at following duty pointChilled Water Leaving Temperature: 53.99 Deg FChilled Water Entering Temperature: 44.0 Deg FWater Flow Rate:- 440 GPM(3 Working + 1 Stand By) |
| 1840 | HVAC CHW PLANT ROOM PUMPS |
| 1841 | Variable Speed Pumping System with accessories dedicated for following zones ( Variabel Speed Primary CHWP , Fix Speed CDWP, Cooling Tower , Process Water Circulation Pumps ) |
| 1842 | Supply, Installation, Testing and Commissioning of True Back-pull out type, End (single) suction, mechanical seal, Centrifugal type Variable Speed Secondary Chilled Water pumps with CI casing and Bronze Impeller - designed to operate at more than 80% overall efficiency; the pump shall be with 4P / TEFC IP55 / EFF3 motor factory assembled base frame with Flexible Coupling and Guard, rubber bellows at suction/discharge, Corrosion resistant painted factory fabricated base frame; pump shall be insulated as specified at site and supplied with 100 mm dial type pressure gauge with SS needle valve and fixtures at suction/disc. ports |
| 1843 | Design basis for secondary pumping shall be as per design specifications enclosed separatelyMotor rating indicated in Power demand sheet are tentative ; Pumps shall be selected for best efficiency point on single operation for each zone and after calculating actual TDh based on product specific Water Pressure drops for AHU and Accessories at the time of supply |
| 1844 | Primary Chilled Water Pump with VFD( 3 working + 1 standby ) |
| 1845 | Water Qty = 960 USGPMTotal Dynamic Head = 35 M WC |
| 1846 | Cooling water Pump( 3 working + 1 standby ) |
| 1847 | Water Qty = 1600 USGPM Total Dynamic Head = 45 M WC |
| 1848 | Primary Hot Water Pump with VFD( 3 working + 1 standby ) |
| 1849 | Water Qty= 440 USGPMTotal Dynamic Head = 35 M WC |
| 1850 | Supply, Programming, Installation, Testing and Commissioning of Pump Logic Controller capable of controlling up to set of pumps proposed here under, Pumps in parallel housed in IP65 Control Panel compatible for interface with Pump electrical Panel , VFD Drive and VFD panel with by pass arrangement , electrical isolators - duly internally wired and tested - parallel pumping software downloaded, along with required DP transmitters for closed loop control |
| 1851 | Primary Chilled Water Pump = 960 USGPM ( For 400 TR Chiller )- 4 Pumps, 4 VFD\"s |
| 1852 | Supply, installation, testing and commissioning of Differential Water Pressure Transmitters with fittings supplied and installed across selected AHU loads in the field and wired up to Pump Logic controller for integrated operation of the variable speed pumping system |
| 1853 | Quoted price shall include cost of vibration isolation and all other associated accessories as per tender specification & duly 42 mm thk. Phisically Crossed Linked Polyolefin Foam covered with Aluminum cladding. |
| 1854 | COOLING TOWER |
| 1855 | Supply, installation, testing and commissioning of FRP Induced draft counter flow bottle type cooling tower; Tower shall be MS HDG Frame work, Access ladder & Supports; FRP Casing and FRP Basin with makeup including Float valve, PVC fills, Distribution system with PP Nozzles, Axial Flow Direct/Belt drive Fan with PVC Blades & MS HDG Hub driven by IP55 TEFC 720 RPM vertical flange mount motor suitable for 415±10% V, 50 Hz, 3 phase supply; power / control wiring, earthing, drain, make up,quick fill connection and vibration isolation etc. as per tender specification. |
| 1856 | 100% Efficient CTI Approved Cooling Tower for designed for WBT of 24.1 Deg C ( To be designed for highest WB Temprature for Karnal, Haryana) , Cooling Water Leaving temp = 32 deg C at and 36.4 Deg C Entering Temp at flow rate of 1600 USGPM(3 working + 1 Stand By) |
| 1857 | EXPANSION TANK & AIR SEPERATOR WITH ACCESSORIES :Supplying, installing, testing and commissioning of PRESSURISED CHILLED WATER EXPANSION TANK suitable for total volume of water in chilled water circuits along with necessary accessories such as centrifugal air separator, pumps etc. in order to keep chilled water system under (+) pressure and to prevent entrapment of pressure and to prevent entrapment of airin the system. The tank shall be precharged steel expansion tank with replaceable heavy duty butyl rubber bladder. The tank shall have 50 MM system connection and 20 mm drain and charging valve connection to facilitate the on site charging of the tank to meet system requirement. The tank shall be fitted with lifting rings and a floor mounting skirt for vertical installation. The tank and air separator must be constructedin accordance with section VIII of the ASME Boiler and pressure vessel (Unfired)code and stamped 175 PSI working pressure. The complete system shall be sourced from single manufacturer and supplied and installed with all accessories and safety fixtures and safety fixtures required for proper functioning of the complete hydronic system. |
| 1858 | Expansion Tank Volume = 4000 gallons and Max dynamic head of approximate 50 mts to be considered. (Pump capacity is 9 GPM @ 50 Mtr Head), The contractor shall submit calculations for total system volume and tank sizing calculations. |
| 1859 | Auto Tube Cleaning System Supply, Installation, testing & Commissioning of On-Line Condenser Tube Cleaning System (OLCTCS) suitable for 400 TR X 04 No. Chiller Condensers of 12 Inch Line Size respectively,01 No. of Common Pump Skid with 04 No. Motorized Ball Valves and 01 No. Control Panel with PLC and Touch Screen HMI04 No. of Ball Traps (BT) of 12 Inch size for 400 TR Chillers 04 no. Condensers04 No. of Ball Collectors (BC) for all 04 no. Chiller Condensers08 No. of Motorized Valves for Injection and Collection Assembly of all 04 no. BC.Sponge Balls for One Time as per OEM. |
| 1860 | Air SeparatorSupply, installation, testing & commissioning of a line size common air separator on the return water line located at the pump suction and suitable for Secondary pump water flow; the separator shall be complete with high capacity air vent, service valve, non return valve, isolation butterfly valve for makeup water inlet. |
| 1861 | Supply, Installation, testing and commissioning of SIDE STREAM FILTRATION SYSTEM to remove unwanted solids from a cooling tower sump using a centrifugal-action vortex separator. Control of solids in the recirculated cooling water system shall be accomplished via a side-stream flow of 10-20% of the full-stream system flow through a completely assembled separation / filtration package. The package\"s pump shall provide sufficient pressure for the re-introduction of side-stream fluid back into system flow.The side steram filteration unit shall have a flow rate of 400 USGPM and pressure drop of 15 mtr ( Apx ) , Maximum working pressure of 10.3 Bar and Maximum operating temperature of 38 deg.C. The complete packaged unit shall consist of the followingThe system shall have all the component - Stainer , Pumps, Seperator, Auto Purge Valve, Related Cooling Water Piping, Electrical panel & Skid Plate |
| 1862 | AIR HANDLING UNITS, CEILING SUSPENDED UNITS, FAN COIL UNITS |
| 1863 | Chilled Water Air Handling Units (AHU) and Ceiling Suspended Units (CSU)Supply, Site Handling , Installation, testing, commissioning and field performance of Double Skinned Sandwiched insulated sectionalised construction Air Handling Unit Complete as per Specifications and AHU Schedules provided under Annexure- I and AHU schedule.For each AHU, outer skin shall be 0.8 mm pre-coated GI and inner sheet shall be 0.8mm GI with 43 mm thick PUF insulation having the density of 38+2 kg/m3. Chilled water coil casing shall be of SS with copper tube and with AL fins. Min. 11-12 FPI. Each AHU and CSU shall be provided with pre-filters and final MERV-13 rated filter. Designated AHU shall be provided with coil by-pass CFM of the quanity shown in the AHU schedule. Each AHU shall be provided with a VFD with bypass arrangement for the supply fan. Each AHU shall be provided with a mixing box for mixing of the return air and the fresh air. Areas located as per Load Summary and with following duty points |
| 1864 | Refer Design Annexure - I for AHU With 3 Row Deep Hot Water CoilEach AHU shall be provided with all Valve Accessories as per P & I Diagram ( 4 No - BFV / 1 No - PIBCV / 1 No - YS / 2 - PG / 2 - TH / 1 - DV / 1 - APV for Chill water piping)(4 - Butterfly valve / 1-Y strainer / 1- three way on-off valve / 2 - PG / 2-TH / 1-APV / 1-DV - For Hot Water Piping) |
| 1865 | 1200 CFM , 3.0 TR |
| 1866 | 1400 CFM , 4.0 TR |
| 1867 | 1600 CFM , 4.0 TR |
| 1868 | 1800 CFM , 4.0 TR |
| 1869 | 2000 CFM , 5.0 TR |
| 1870 | 2600 CFM , 6.0 TR |
| 1871 | 3000 CFM , 7.0 TR |
| 1872 | 3200 CFM , 7.0 TR / 8.0 TR |
| 1873 | 3500 CFM , 8.0 TR |
| 1874 | 3600 CFM , 9.0 TR |
| 1875 | 4000 CFM , 10.0 TR |
| 1876 | 5000 CFM , 12.0 TR / 13.0 TR |
| 1877 | 6000 CFM , 13.0 TR / 14.0 TR |
| 1878 | 6200 CFM , 14.0 TR |
| 1879 | 6600 CFM , 16.0 TR |
| 1880 | 7000 CFM , 18.0 TR |
| 1881 | 7500 CFM , 18.0 TR |
| 1882 | 8000 CFM , 18.0 TR |
| 1883 | 8200 CFM , 21.0 TR |
| 1884 | Floor Mounted Type AHUSupply, Site Handling , Installation, testing, commissioning and field performance of Double Skinned Sandwiched insulated sectionalised construction Air Handling Unit Complete as per Specifications and AHU Schedules provided under Annexure- 1 For each AHU, outer skin shall be 0.8 mm pre-coated GI and inner sheet shall be 0.8mm GI with 43 mm thick PUF insulation having the density of 38+2 kg/m3. Each AHU shall be provided with pre-filters and final MERV-13 rated filter. Each AHU shall be provided with a VFD with bypass arrangement for the supply fan. |
| 1885 | Each AHU shall be provided with all Valve Accessories as per P & I Diagram ( 4 No - BFV / 1 No - PIBCV / 1 No - YS / 2 - PG / 2 - TH / 1 - DV / 1 - APV) |
| 1886 | 4000 CFM , 10.0 TR |
| 1887 | 4800 CFM , 9.0 TR |
| 1888 | 10000 CFM , 25.0 TR |
| 1889 | 11000 CFM , 27.0 TR |
| 1890 | 12000 CFM , 26.0 TR / 27.0 TR |
| 1891 | 13000 CFM , 28.0 TR / 30.0 TR |
| 1892 | 14000 CFM , 30.0 TR |
| 1893 | Floor Mounted Type AHU (For Operation Theatre) Supply installation testing and commissioning of Floor Mounted 0.8 mm GI Double Skinned Chilled Water AHU. For each AHU, outer skin shall be 0.8 mm pre-coated GI and inner sheet shall be 0.8mm Aluminium with 43 mm thick PUF insulation having the density of 38+2 kg/m3. , the AHU shall comprising of: Mixing box / Anodized Aluminum Aerofoil Low leakage Fresh / Balancing / Exhaust Air Damper/ Bleed Dampers / Pre-Filter section with EU-4 compliant Prefilters for Return and Fresh Air / Coil section with ARI 410 compliant Cu Tube / Al finned 6 Row deep -13 FPI CWC Coil / double skin sandwitch insulated removable SS 304 condensate drain pan / Fine filter EU 5 / fine filter section with EU 9 compliant / Fan section with Hi static best efficiency Plug Fan driven by suitable pole Eff-1 TEFC Motor with Drive Package / Al aerofoil SA damper/Fire Retardant Canvass connection/Unit mounted on cushy foot Vibration isolators; Balance specifications as per tender. Refer tender AHU Fabrication Scheme Drawing for understanding design compliance of AHU.The AHU unit to be supplied with UVGI equipment which shall be listed to UL 1995 and certified for smoke and fire safety to UL 2043, kill rate not less than 90% per pass |
| 1894 | Following AHU acessories shall be supplied by AHU manufacturer along with AHU and not site fabricated by HVAC contractor :1/2/3/41. Diffential pressure switches with anounciation panel across all filter banks ,2. Variable Frequency Drive package suitable rating for SA Fan motor , housed in AHU Starter Panel- IP 55 - 14G MS powder coated Panel designed and rated to feed Fan Motor / Heatersincluding all safeties (short circuit, overload protection) The panel shall be duly internally wired and tested and provided with necessary electrical hardware required for remote monitoring - comprising of 2W/2P Auto manual switch / Potential free contacts for On/Off Status, Trip Status & On/Off Command Relay for SA, RA Motors & ReHeaters / additional Bypass status for VFD. Design Factor : EU4/EU7 Face velocity : 500 FPM ; Cooling Coil Face: 350 ; SA Fan Disc. 1750 FPM ;AHU with all above specification and acesories compliance with following ratings |
| 1895 | Each AHU shall be provided with all Valve Accessories as per P & I Diagram ( 4 No - BFV / 1 No - PIBCV / 1 No - YS / 2 - PG / 2 - TH / 1 - DV / 1 - APV) |
| 1896 | Load : 5.0 TR / D - CFM : 2500 CFM / 100 mm WC / 6 Row Deep CHW Coil / 9.0 kw Heater Bank for reheat -Floor Mounted Type |
| 1897 | Load : 5.0 TR / D - CFM : 3000 CFM / 100 mm WC / 6 Row Deep CHW Coil / 9.0 kw Heater Bank for reheat -Floor Mounted Type |
| 1898 | Load : 8.0 TR / D - CFM : 3800 CFM / 125 mm WC / 6 Row Deep CHW Coil /12.0 kw Heater Bank for reheat - Floor Mounted Type |
| 1899 | Chilled Water Fan Coil Unit ( FCU )Low Noise Sleek ( Height not more then 12\" ) chilled water fan coil unit( FCUs )to be complete with room thermostat. The scope also includes theThermostatic Decorative LCD Display Room Controller with 10 Rmt control wire and conduit for Fan Coil Units with built in temperature sensor; On/Off switch, Digital Temp Display, Set Point Edit and 3 speed switch. Thermostat shall be BMS Compatible. |
| 1900 | Each Fan Coil Unit shall be provided with all Valve Accessories as per P & I Diagram ( 1 No - Ball valve with Y strainer / 1 No - Ball Valve / 1 No - 3 Way on/off Control Valve) |
| 1901 | 600 CFM , 1.5 TR |
| 1902 | 800 CFM , 2.0 TR |
| 1903 | 1000 CFM , 2.5 TR |
| 1904 | 1200 CFM , 3.0 TR |
| 1905 | CHILLED / HOT WATER & CONDENSER WATER PIPING AND PIPE INSULATION: |
| 1906 | Chilled Water Piping & Hot Water PipingSupply, installation, pressure testing of MS C Class Chilled Water Piping laid with supports as per details in drawings. Pipes shall be complete with required elbows (short and long), Tees, Reducers, flanges, fittings, supports as required. ( SITC of MS Piping with insulation as speficied in technical specification) |
| 1907 | 32 mm NB |
| 1908 | 25 mm NB |
| 1909 | Drain Piping : SITC of Rigid PVC drain pipe of 10 Kg/cm2. rating with 9 mm thk.nitrile rubber insulation. |
| 1910 | 50 mm NB |
| 1911 | 40 mm NB |
| 1912 | 32 mm NB |
| 1913 | 25 mm NB |
| 1914 | SITC of FRP Coating on Condenser Water Pipe |
| 1915 | 450 mm NB |
| 1916 | 250mm NB |
| 1917 | CHILLED WATER AND CONDENSER WATER VALVES AND ACCESORRIES |
| 1918 | Supply, Installation , Insulation , Testing And Balancing Of Insulated Double Regulating Manual Balancing Valves As Per P&I Diagram |
| 1919 | 300 mm NB |
| 1920 | 250 mm NB |
| 1921 | SITC Of Ball Valve With Gun Metal Body And Ss Moving Part |
| 1922 | 40 mm NB |
| 1923 | 32 mm NB |
| 1924 | 25 mm NB |
| 1925 | SITC of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for Condenser/hot water circulation as specified. |
| 1926 | 250 mm NB |
| 1927 | SITC of Automatic Air Purge Valve / Drain valve / Test Point |
| 1928 | 25 mm NB |
| 1929 | 6mm Connection Test Point |
| 1930 | SITC of Flexible Groved Couplings / Expansion Bellow for Chilled Water AHU Connection , Chiller Connection |
| 1931 | 250 mm NB |
| 1932 | 200 mm NB |
| 1933 | 125 mm NB |
| 1934 | Pressure Gauge 0 to 15 Kg/cm² |
| 1935 | Temperature Gauge 0 - 150 °C |
| 1936 | Pump Suction Guide Supply ,Installation and testingof Suction dirt separator of MS construction of PN16 rating, with SS pall rings.To be provided atinlet of each pump.The size of suction dirt separator shallmatch with pump inlet flange size. |
| 1937 | 200MM NB |
| 1938 | 150MM NB |
| 1939 | 125MM NB |
| 1940 | 300 mm NB - Pot Strainer |
| 1941 | SITC of Non Return Valves -With Dual Plate Of C.I. Body, Ss Plate, Vulcanized Nbr Seal Flanged End & Pn 10 Pressure Rating As Specified |
| 1942 | 250 MM NB |
| 1943 | SITC of Motorized Isolation Type Butterfly Valves In Pn16 Rating( Chw Valves Is To Be Insulated ) Complete With Actuator: |
| 1944 | 250 mm NB |
| 1945 | 200 mm NB |
| 1946 | BTU MeterSITC of ULTRASONIC TYPE BTUH METERS FOR ENERGY MONITORING PURPOSEBtu Transmitters as per the specification for tenant billing. shall consist of following items of following sizes:BTU meter , Inline flow meter , Matching pair sensors , heat integrator , Minimum 4 Data / Meter to Master Controller - T1 / T2 / Flow / KWH- with 2 mtr 2C shielded communication cable |
| 1947 | Suitable for 250mm Dia CHW Pipe Installation |
| 1948 | Imersion Flow Meter - Mechanical Type |
| 1949 | Suitable for 250 mm Dia CHW Pipe Installation |
| 1950 | AIR DISTRIBUTION NETWORK |
| 1951 | Supply and installation of Aluminium factory fabricatedrectangular ducts, complete with flanges and bracing (as specified), necessary supports using thread roads (as directed) and anchor bolts, supply air collars, vanes, splitters dampers duly painting of the ducts and as per specification for Air Conditioned Areas |
| 1952 | 22 G |
| 1953 | 24 G |
| 1954 | Supply and installation of MS Welded rectangular ducts, complete with required flanges , necessary supports using thread rods (as directed) and anchor bolts, supply air collars, vanes, splitters dampers and as per specification for Air Conditioned Areas - For Kitchen Exhaust |
| 1955 | 16 G MS Ducting |
| 1956 | Supply Installation Testing And Commssioning Of Diffusers/ Grilles As Per Following Schedule |
| 1957 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. DSR 16.17 Taking @ 20% less on DSR Rate. |
| 1958 | Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers as per specification. DSR 16.18 Taking @ 20% less on DSR Rate. |
| 1959 | Supplying & fixing of power coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specification DSR 16.15 Taking @ 20% less on DSR Rate. |
| 1960 | Supplying & fixing of power coated extruded aluminium Return Air Grills with Louvers but without volume control dampers as required DSR 16.16 Taking @ 20% less on DSR Rate. |
| 1961 | Alu. Powder Coated Exhaust Air Grill with VCD |
| 1962 | Supply, Installation, Testing, Commissioning Of Duct Dampers Aluminium opposed blade aerofoil dampers with PVC gears for smooth operation for Air Flow Control |
| 1963 | Supplying, Fixing,testing and commissioning of fusible link type fire dampers in supply air duct/main branch and return air path as and where required of required sizes tested for 70Deg.C temp. & 90 min. fire rating as per UL 555/1995 tested by CBRI as per specifications. |
| 1964 | Fire/Smoke operation compatible Metallic Volume Isolation damper with gasketed leak tight isolation of smoke complying to UL standards and individual unit shall be UL marked; linkages shall be smooth operation fire-proof geartrain with smooth mesh and operation on actuated action. UL listed Fire/Smoke proof ON/Off spring return type damper actuators rated more then the Torque required for the damper where installed. |
| 1965 | DUCT THERMAL INSULATION |
| 1966 | Thermal insulation of Ducts with Class ‘O’ ALU E with tough Aluminum foil facing(FM approved & in accordance toUL 94(HB,V0) Closed Cell Nitrile Rubber having thickness of 19 mm for Supply AirDuct as per the specifications & 13 mm for Return AirDuct Insulation. Thermal Conductivity is 0.035 w/m.k (as per EN 12667/ EN ISO 8497) and having µ value is = 60000. |
| 1967 | 13 mm For Supply air Ducting ( SA duct through F/c loose return) |
| 1968 | 19 mm For Supply air Ducting ( SA duct through Non AC Area , all exposed SA and RA ducting) |
| 1969 | Duct Accoutic InsulationSupply and fixing of acoustic lining inside sheet metal ducts with 13mm / 19 mm arma sound elastrometric nitrile rubber of density 150Kg/cub.mtr and thermal conductivity of 0.036 W/m k |
| 1970 | 15 mm |
| 1971 | 19 mm |
| 1972 | AHU Room Accoustic InsulationAcoustic insulation for plant room using 50mm thick Twiga 300 rigid board stick and GI frame work. Insulation to be covered with glass fiber cloth & 28 g perforated aluminum sheet.For Main AHU Rooms |
| 1973 | Underdeck Insulation |
| 1974 | Under deck Insulation with 50 mm thick Fire Retardant Extruded Polystyrene having density of 32 Kg / M3 and thermal resistance of 1.78 M2 K / W |
| 1975 | VENTILATION SYSTEM |
| 1976 | SITC ofVentilation Fan as per Schedule and Specification |
| 1977 | INLINE TYPE EXHAUST AIR FAN |
| 1978 | 100 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1979 | 150 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1980 | 200 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1981 | 250 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1982 | 300 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1983 | 350 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1984 | 400 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1985 | 450 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1986 | 500 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1987 | 550 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1988 | 750 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1989 | 800 CFM, INLINE TYPE EXHAUST AIR FAN |
| 1990 | CABINET TYPE EXHAUST AIR FAN |
| 1991 | 2100 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1992 | 3200 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1993 | 4100 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1994 | 6000 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1995 | 6400 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1996 | 6600 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1997 | 7600 CFM, CABINET TYPE EXHAUST AIR FAN |
| 1998 | CABINET TYPE FRESH AIR FAN FILTER UNITSupply and Installation of Floor Mounted CabinetType Centrifugal Fresh Air Fan Filter Unit complete with MS zinc sprayed / powder coated DIDW Centrifugal Impeller Fan with motor for maximum speed duty point of Specified CFM and Static pressure as specified , complete with drive package comprising of V belts and Grooved pulley pair keyed to motor and fan shafts. panel. The fan shall have easily wahable 20 micron fresh air filter The Fan units shall be designed as per the criteria mentioned in the specifications and selected so as to operate in the best efficiency zone; the units shall be statically and dynamically balanced.Necessary starter shall be in scope of HVAC Contract. Power cable will be available up to starter panel. |
| 1999 | 2800 CFM |
| 2000 | 3500 CFM |
| 2001 | 5100 CFM |
| 2002 | 5500 CFM |
| 2003 | 5600 CFM |
| 2004 | 6500 CFM |
| 2005 | 25000 CFM - FOR PRESSURIZATON SYSTEM IN LIFT WELL |
| 2006 | 18500 CFM -FOR PRESSURIZATON SYSTEM IN LIFT WELL |
| 2007 | 13500 CFM - FOR PRESSURIZATON SYSTEM IN LIFT LOBBY |
| 2008 | 13500 CFM - FOR PRESSURIZATON SYSTEM IN STAIRCASE |
| 2009 | AIR SCRUBBER UNIT (WET TYPE) FOR KITCHEN EXHAUST |
| 2010 | Supply, Installation, Testing & Commissioning of Double Skin Wet type Scrubber for Kitchen Exhaust as per following Specs.Panels : 25mm Thick Doubel Skin With PUF having 38 +/-2 kg per Cubic meter densityInner / Outer Skin : 20 G G.I. Plaion / 24 G G.I. Pre CoatedFrame Structure : Extruded Aluminium Profile (Without Thermal Break)Types Of Fans : DIDW Backward Curved CentrifugalSpray Bank : 2 NosSpray Nozzle : PVCDistribution Pipe : G.I. or EPVCSump Tray : 18G S.S. 304Pump : Monoblock 1 No Working along with inter connecting pipingFilter Face Velocity : Not Exceeding 500 FPM.Fan Outlet Velocity : Not Exceeding 1800 FPMUnit Base : \"C\" Section of 75 X 40mm Mild Steel Duly Enamel paintedMotor : Standard Foot Mounted of Standard Efficiency (EEF-3) Non FLP ConstructionFilter : Anodised Aluminium Flange type. DAMPER : LOW LEAKAGE AEROFOIL DESIGN, WITH CONCEALED NYLON GEARS OF ANODIZED ALUMINIUM CONSTRUCTION (SUITABLE FOR MOTORISED OPERATION)Damper : Low leakage Aerofoil design, with concealed nylon gears of anodized aluminium construction (Suitable for Motorised Operation). |
| 2011 | 13000 CFM / 65 mm TSP (For Kitchen) |
| 2012 | AIR WASHER UNITS FOR KITCHEN FRESH AIRSupplying, installing, testing and commissioning of Cellulose Fill Air Washer, giving 90% efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing, 3 mm thick MS hot dip galvanized water tank,plug fans , Cellulose fill, water distribution header, heavy class GI piping, butterfly valves, make up connection with float valve, drain connection with drain valve, for quick fill with valves, overflow connection, isolation of tank, pumps and brass strainers, Y strainers and necessary fittings.he quoted price shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen fabric filters and drift eliminators.The price shall also include horizontal monoblock pumps of Beacon weir / KEC make of suitable rating (including one standby pump), factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±6% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor.VFD starter with remote operting push button at Kitchen location and power and control cabling from fan to kitchen shall be in scope of HVAC Contract. Power cable will be availabe up to starter panel by electrical contractor. |
| 2013 | 11000 CFM / 50 mm TSP - Roof Top Kitchen |
| 2014 | SMOKE EXTRACTION FANTube Axial fans as specified with GI cowl arrangement at Exhaust point above groundwith GI bird screen for Smoke Exhaust Air.Necessary starter shall be in scope of HVAC Contract. Power cable will be available up to starter panel. The starter should be capable to run automatically in case of fire. |
| 2015 | 28500 cfm |
| 2016 | 36250 cfm |
| 2017 | Differential Pressure Transmitters installed for DP feedback for individual shaft for Fan speed maintenance |
| 2018 | Smoke sensors for system trip in case of feedback smoke entering the shaft located at two locations per shaft. |
| 2019 | BASEMENT VENTILATION SYSTEM |
| 2020 | Supply, installation, testing, programming and commissioning Car park Ductless Ventilation / Jet fans for Basement as per attached specifications for normal ventilation suitable for Normal ventilation and Smoke Extraction application. The complete fan assembly with its Casing, impeller & motor (not only the motor or one of the item) shall be imported from manufacturer and certified as tested for 250 Deg C for 2 hours operation.The jet fans as shown in the drawing*. Each fan shall be complete with dual speed motor. Casing shall be made of Hot Dipped Galvanized Steel. The Motor shall run on the electrical power suitable for 1 Ph/ 50Hz.Final quantity of Jet Ventilation Fans shall be installed as per CFD analysis to ensure zero air stagnation within the parking areas; price includes CFD analysis for the system |
| 2021 | 350 Dia Jet Fan |
| 2022 | *Quantities are indicative; vendor to quote exact quantity as per their product performance and CFD compliance in their bid. |
| 2023 | Single Speed type Tube Axial Fan as specified with GI cowl arrangement at Exhaust point above groundwith GI bird screen for Exhaust Air for # |
| 2024 | For Basement 28000 CFM @ 18 mm WC TSP Suitable for Fire Mode operation rated for 250 Deg - 2 Hrs Operation |
| 2025 | # These fans have to be offered by Vendor for normal and fire mode operation; actual fan duty point and BHP to be indicated in the bid |
| 2026 | # Vendor to provide a work sheet showing area / volume / air changes considered for normal and fire modes and respective CFM separately in their proposal |
| 2027 | Supply, programming, installation, testing and commissioning of Integrated control and electrical hardware for operation of Jet Fans and Tube Axial Fans in Normal and CO/Fire Mode comprising of Duly internally wired and tested Electrical Power Panel with feeders and starters suitable for operation of total Jet Fans and total Tube Axial Fans with necessary accessories / relays / auto-manual provision etc as per above fan quantity |
| 2028 | For Basement |
| 2029 | Control Module housed within the electrical panel comprising of Programmable logic controller / signal wiring / hard wired integration with fan relays of Power panel for control of 10 TA fans, 01 Jet fans and 2 CO sensors input signal |
| 2030 | Field CO sensors duly calibrated with calibration reports |
| 2031 | Note: Fire status signal shall be provided from FAS system by FAS/IBMSvendor |
| 2032 | Note : Quantity of CO sensors shall be as per vendor requirement to maintain average CO ppm level below 100mgat all times and indicated clearly in the offer |
| 2033 | Simulation package to execute CFD Analysis (Takeoff price) |
| 2034 | S/I/T/C of Power control cables of 3 core suitable ratingFRLS, between Jet Fans and Panel / Signal & Control Cabling between CO Sensors and Jet Fan Panel PLC/Power Cabling and Control cabling between TAF Panel and TA Fans complete in all respect upto the satisfaction of Engineer-in-charge of the work. |
| 2035 | Miscellaneous Work |
| 2036 | Painting work for Equipments / Pipes / Ducting including Taging of equipments under the scope of this tender with color shades as per code specified. All exposed metallic surfaces shall be painted with corrossion proof paint; work shall include Tagging of all Equipment with area codes / water flow directions on Piping etc as required by site incharge |
| 2037 | HVAC PANELS |
| 2038 | Main HVAC Panels |
| 2039 | Supply, installation, testing and commissioning of the following integrated cubicle type dead front extensible sheet steel control panel, anchoring of panel to foundation. The panel shall be suitable for 415Volts/3Ph/50Hz as per IS 8623, partial type tested assembly.Quoted price shall also include Rubber mats etc. The panel shall have separate compartment for bus bar and cable alleys. The following components and accessories shall be mounted within each control panel as per IS 8623 partial type tested assembly. |
| 2040 | INCOMER : |
| 2041 | Two set of 1250 Amps Electrically operated draw out type 4 pole ACB with 6 NO & 6 NC contacts and complete with the following |
| 2042 | 0-500 Volts digital type Ammeter with selector switch |
| 2043 | 0-1250 Amps digital type Ammeter |
| 2044 | CTs and selector switches. |
| 2045 | Overvoltage tripping mechanism for persistent voltage exceeding 110% of the rated voltage for more than 5 minutes |
| 2046 | CT operated over current and earth fault relay(IDMT) with CTs |
| 2047 | 1250/5A SP 10 protection class VA burden |
| 2048 | Phase indicating Lamps with toggle switches and control fuses. |
| 2049 | Bus Bars : |
| 2050 | copper Bus bar with heat shrinkable sleeves rated at 1600 Amps for 3 ph and neutral phase. Bus bar shall have maximum current density of 0.8amps/mm2 and the neutral phase bar of not less than 50% capacity |
| 2051 | BUS COUPLER |
| 2052 | One set of 2000 Amps Electrically operated draw out type 4 pole ACB with 6 NO & 6 NC contacts and complete with the following |
| 2053 | Protection releases / relays, Metering & Accessories for Bus Coupler (s) |
| 2054 | Trip circuit supervision relay |
| 2055 | TNC switch. |
| 2056 | Auto / manual selector switch |
| 2057 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. |
| 2058 | The bus coupler shall be electrically and mechanically interlocked with all incomingACB\"s in such a way that at any one time two supply should not get mixed up. |
| 2059 | Outgoing: |
| 2060 | 4 nos. 500 Amps ELECTRONIC RELEASE FP MCCB(50KA) with neutral link for 400 TRwater cooled chilling machine compressor motor. The compartment shall contain CT operated ammeter of 0-630 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor.(one spare) |
| 2061 | 4 nos. 100 Amps contactor with TP MCCB 63 A(50KA) with neutral link and 15 kw VFD Panel as per Spaceand details and all accessories for primary chilled water pump motor. The compartment shall contain CT operated ammeter of 0-63 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor.(one spare) |
| 2062 | 4 nos. 125 Amps contactor with TP MCCB 100 A(50KA) with neutral link and 44 kw VFD Panel as per Spaceand details and all accessories outgoing feeders for condenser water pump motor. The compartment shall contain CT operated ammeter of 0-150 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor.(one spare) |
| 2063 | 4 nos. 250 AmpsTP MCCB(35KA) with neutral link outgoing feeders for Hot water Generator. The compartment shall contain CT operated ammeter of 0-250 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor. |
| 2064 | 4 nos. 100 Amps contactor with TP MCCB 63 A(15KA) with neutral link and 7.5 Kw star delta starter and all accessories to outgoing feeders forPrimary Hot Water Pump motor. The compartment shall contain CT operated ammeter of 0-100 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor. |
| 2065 | 4 nos. 100 Amps contactor with TP MCCB 63 A(15KA) with neutral link and 7.5 Kw star delta starter and all accessories to outgoing feeders for Secondary Hot Water Pump motor. The compartment shall contain CT operated ammeter of 0-100 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor. |
| 2066 | 4 nos.63 Amps contactor with TP MCCB of 63 A(50KA) with neutral link and 40 kw direct on line starter and all accessories outgoing feeders for Cooling Towers fans motors. The compartment shall contain CT operated ammeter of 0-63 Amps range with selector switch and indicating lamps with fuse and toggle switch for ON and Trip status of motor.(one spare) |
| 2067 | Control Panel in Air Handling Units: |
| 2068 | Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications.The panel shall include the following accessories : |
| 2069 | MCCB as per rating given below. |
| 2070 | Terminal block for power distribution. |
| 2071 | Single Phase Preventor. |
| 2072 | Phase indicating lights and indicating lights for ON/TRIP status |
| 2073 | Digital type Ammeter and suitable size CT and selector switche. |
| 2074 | Time delay relay for automatic restart of AHUs motors. |
| 2075 | Auto/Manual stop selector switch shall be provided in each AHU Panel.The same should provide potential free contact for position monitoring to BMS system. |
| 2076 | All starters shall have suitable potential free contacts |
| 2077 | Wiring for microswitch for stopping the fan when fire dampers closes.(Approved Make: spc electrotech/ abb/general electric |
| 2078 | The number of AHU panel shall be as detailed below : |
| 2079 | 16 amps TPMCB with 1 No.1.5/2/3 HP DOL Starter for AHU |
| 2080 | 25 amps TPMCB with 1 No.5.0 HP DOL Starter for AHU |
| 2081 | 25 amps TPMCCB with 1 No.7.5 HP DOL Starter for AHU |
| 2082 | 25 amps TPMCCB with 1 No.10.0 HP star Delta Starter for AHU |
| 2083 | Control Panel for OT Air Handling Units : |
| 2084 | Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications.The panel shall include the following accessories : |
| 2085 | suitable incoming,MCCBs as per rating given below. |
| 2086 | Terminal block for power distribution. |
| 2087 | Single Phase Preventor. |
| 2088 | Phase indicating lights and indicating lights for ON/TRIP status |
| 2089 | Digital type Ammeter and suitable size CT and selector switches. |
| 2090 | Time delay relay for automatic restart of AHUs motors. |
| 2091 | Auto/Manual stop selector switch shall be provided in each AHU Panel.The same should provide potential free contact for position monitoring to BMS system. |
| 2092 | All starters shall have suitable potential free contacts |
| 2093 | Wiring for microswitch for stopping the fan when fire dampers closes. |
| 2094 | The number of AHU panel shall be as detailed below : |
| 2095 | 63 TP MCCB as incomer 40 amps TPMCB with 1 No.suitable DOL Starter for AHU fan motor , 40 amps TP MCB for humidifier |
| 2096 | Control Panel for Pressurisation fans Sections & Axial Fans: |
| 2097 | Supply,installation,testing and commissioning of the following cubicle type openable front ,sheet steel wall mounted control panels sleeve type Al. bus bar including anchoring into the wall.These panels shall be complete in all respects as per the drawings and the specifications.The panels shall include the following accessories : |
| 2098 | MCCB as per rating given below. |
| 2099 | Terminal block for power distribution. |
| 2100 | Single Phase Preventor. |
| 2101 | Phase indicating lights and indicating lights for ON/TRIP status |
| 2102 | Digital type Ammeter and suitable size CT and selector switches. |
| 2103 | Time delay relay for automatic restart of Fan motors. |
| 2104 | Auto/Manual stop selector switch shall be provided in each Fan Panel. |
| 2105 | All starters shall have suitable potential free contacts |
| 2106 | The number of El. Panelsshall be as detailed below : |
| 2107 | 6 amps TPN MCB with 1 Nos upto 1HP DOL Starter |
| 2108 | 16 amps TPN MCB with 1 Nos 5.0 HP DOL Starter |
| 2109 | 32 amps TPN MCCB with 1 Nos 7.5 HP DOL Starter |
| 2110 | 32 amps TPN MCCB with 1 Nos 15 HP star delta Starter |
| 2111 | Supply & Erection of following siz of 1.1KV grade multicorealuminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment |
| 2112 | 3.5 x 50 sq.mm |
| 2113 | 3.5 x 185 sq.mm |
| 2114 | 3.5 x 240 sq.mm. |
| 2115 | 4 x 10 sq.mm. |
| 2116 | 4 x 16 sq.mm. |
| 2117 | ESTATE ELECTRICAL HSR PART EARTH WORKEarth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. as per HSR 4.12 4.12.1 All Kinds of soil |
| 2118 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.as per HSR 4.32 |
| 2119 | CONCRETE WORKProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. as per HSR 6.11. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 2120 | 6.1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 2121 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. as per HSR 6.256.25.1 All work upto plinth level |
| 2122 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints,spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level as per HSR 6.33Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 2123 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :as per HSR 6.306.30.1 Foundations, footings, bases of columns etc. for mass concrete. |
| 2124 | 6.30.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 2125 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: as per HSR 7.20.1Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2126 | BRICK WORKBrick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in: (Derived Rate) as per HSR 7.217.21.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 2127 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : as per HSR 7.221.Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2128 | FINISHING WORKNeat cement punning.HSR 11.3 |
| 2129 | 12 mm cement plaster of mix :as per HSR 11.5.3 1:4 (1 cement: 4 fine sand) |
| 2130 | STEEL WORKSteel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. as per HSR 13.2913.29.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 2131 | Supply,testing and Commissioning ofSilent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel operation, 0.85 load factor including circuit breaker for isolation, sound proof acoustic and weather proof enclosure, residential type silencer (as per CPCB norms-2) fabricated out of CRCA sheet of 14 / 16 SWG thickness with 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following. |
| 2132 | Diesel Engine - |
| 2133 | Diesel Engine suitable for driving alternator of below rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for below output of alternator at 40oC, 50% RH & at 210 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of prime continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system. |
| 2134 | Instrument Panel - Engine mounted Instrument Panel fitted withand having digital display for followings : Start stop switch with keyWater temperature indicationLubrication oil pressure indication.Lubrication oil temperature indication.Battery charging indicationRPM indicationOver speed indicationLow Lube oil trip indicationEngine hours indication |
| 2135 | Alternator- Synchronous Alternator of below capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 210 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of prime continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for bus duct termination as required. |
| 2136 | Note : - Alternator should have with all other accessories as per specified in Technical specfications. |
| 2137 | Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer. |
| 2138 | Power Controller For DG synchronization |
| 2139 | Microprocessor based Power command controller (P.C.- 3.3 Jakson or equivalent) suitable for auto / manual synchronization & auto load sharing. |
| 2140 | Daily service Fuel tank of990 liters capacity fabricated out of 2 mm thick MS sheet complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, provision for fuel transfer system,level indicators and all standard accessories etc. as required.Exhaust Silencer - Exhaust manifold with residential silencer. |
| 2141 | The D G set should be supplied with required hardware for external PLC based auto synchronization, auto load sharing, auto load management system. |
| 2142 | Starting system - 24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with 12/24 Volts suitable nos. lead acid type batteries of suitable AH.Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications. |
| 2143 | 250 KVA |
| 2144 | 500 KVA |
| 2145 | 1010 KVA |
| 2146 | Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages..HSR 23.26.2 |
| 2147 | Supply and erection of shock restoration chart in glass frame..HSR 23.26.3 |
| 2148 | Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6\"x4\" made of GI pipe 32mm dia).HSR 23.26.4 |
| 2149 | EARTHING AND LIGHTENING ARRESTORHSR 24.1i)Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 2150 | ii)Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 2151 | Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work HSR 24.2.62.5 sqmm |
| 2152 | 4 sqmm |
| 2153 | 6 sqmm |
| 2154 | Supply and erection of suitable compression type brass cable glands for underground Cable :- HSR 24.2.7Up to 6 Sq mm cable 2 to 4 Core |
| 2155 | 70 sqmm to 95 sqmm Cable 3 to 3½ Core |
| 2156 | 120 sqmm to 185 sqmm Cable 3 to 32 Core |
| 2157 | 240 sqmm to Cable 3 to 32 Core |
| 2158 | 300 sqmm to 400 sqmm Cable 3 to 3½ Core |
| 2159 | Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work .HSR24.2.810 sqmm |
| 2160 | 16 sqmm |
| 2161 | 35 sqmm |
| 2162 | 70 sqmm |
| 2163 | 95 sqmm |
| 2164 | 120 sqmm |
| 2165 | 150 sqmm |
| 2166 | 185 sqmm |
| 2167 | 240 sqmm |
| 2168 | 300 sqmm |
| 2169 | 400 sqmm |
| 2170 | Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint .HSR 24.2.9For 185 sqmm Cable 300 sqmm cable 3 to 4 Core |
| 2171 | For 400 sqmm Cable 3 to 4 core |
| 2172 | Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with \"cable\" word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level.HSR 24.2.10 |
| 2173 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredHSR 24.3.3.2150 to 185 sqmm |
| 2174 | 240 to 400 sqmm |
| 2175 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:24.3.4.2150 to 185 sqmm |
| 2176 | Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:HSR 24.3.5.2120 to 150 sqmm |
| 2177 | 185 to 240 sqmm |
| 2178 | 300 to 400 sqmm |
| 2179 | Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB, end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-chargeHSR 24.4.8.24 Metre Long pole with top dia 65 mm and bottom dia 130 mm with base plate of size 225 x 225 x12 mm |
| 2180 | 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mmHSR 24.4.8.5 |
| 2181 | S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. as per HSR 25.5.2.7. DWC/HDPE pipe 180/150 mm outer dial inner dia |
| 2182 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : as per HSR 22.1681.100 mm dia. R.C.C. pipe |
| 2183 | 2. 150 mm dia. R.C.C. pipe |
| 2184 | 3.250 mm dia. R.C.C. pipe |
| 2185 | 4.300 mm dia. R.C.C. pipe |
| 2186 | ESTATE ELECTRICAL NS PART TRANSFORMER(11 KV / 0.433 KV)Supply, testing & commissioning of Outdoor mounted type 11 KV / 433 VoltTransfomer as per IS : 1180 of Level with latest amendments at the time of instalation., 3 phase, 6.25% impedance, Dyn 11 vector group, 50 cycles, (ONAN) oil immersed naturally cooled, step down,copper wound, continuous duty, temperature rise above 50oC in oil by thermometer 40oC, in winding by resistance 45oC and other standard accessories as required including followings: |
| 2187 | The Transformer losses should confirm to as per IS : 1180 of Level 3 with latest amendments at the time of instalation. |
| 2188 | With compactible input/output |
| 2189 | a) Cable Termination box with disconnecting facility for 11 KV 3C-300 sq mm XLPE cable at 11 KV side |
| 2190 | b) LV side box suitable for suitable Amp bus duct termination |
| 2191 | c) Automatic On Load Tap Changer +10% to -10% @ 1.25% in 16 equal steps with RTCC Panel (Remote tap changer control panel) consisting of followings- |
| 2192 | High torque, electric motor suitable for 415V 3 Ph. 50 Hz., AC supply. |
| 2193 | Motor drive and energy accumulator. |
| 2194 | Monitor isolating device with overload protection. |
| 2195 | Contactors for Forward & Reverse operations of motor. |
| 2196 | Oil Surge Relay |
| 2197 | “RAISE / LOWER” control for local operation. |
| 2198 | “LOCAL / REMOTE”controlselector switch. |
| 2199 | “RAISE / LOWER” limit switches. |
| 2200 | Stepping Relay. |
| 2201 | Auxiliary Transformer. |
| 2202 | d) Bidirectional rollers. |
| 2203 | e) Oil Conservator with filter cap, drain plug & oil level gauge |
| 2204 | f) Earthing terminals 2 nos for body earthing. |
| 2205 | g) 0.415 KV neutral seperately bought out on a bushing for neutral earthing. |
| 2206 | h) Neutral CT as required. |
| 2207 | i) Pressure release device. Double diaphragm explosion vent. |
| 2208 | j) Radiators Detachabletype with top & bottom shut off valve. |
| 2209 | k) First filling of filtered dehydrated oil as per IS : 335 including make up fill during installation & 10% extra. |
| 2210 | l) Silica gel breather with connecting pipe & oil seal. |
| 2211 | m) Rating, Diagram & Terminal marking plate of SS. |
| 2212 | n) Sampling Valves for filteration, drainage and filling with plugs. |
| 2213 | o) Air release plugs. |
| 2214 | p) Thermometer pocket with plug. |
| 2215 | q) Lifting Lugs. |
| 2216 | r) Double float Buchholz relay with gas release cock, alarm & shut off valve on either side with separate set of contacts for trip and alarm. |
| 2217 | s) 150 mm Winding temperature indicator(WTI) with alarm. (for 800 KVA & above) |
| 2218 | t) 150 mm Oil temperature indicator(OTI) with alarm |
| 2219 | u) Marshalling Box. |
| 2220 | v) Clamping device. |
| 2221 | w) Jacking Pads. |
| 2222 | x) Ladder with safety device for access to the top of transformer tank. |
| 2223 | The work shall be complete in all respects up to the satisfaction of Engg-in-charge. |
| 2224 | 2500 KVA |
| 2225 | HT PANEL- SITC of indoor type floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 54,The switchgear boards shall have a single front, single tier, fully compartmentalized, metal enclosed construction complying with clause No. 3.102 of IEC 62271-200, comprising of a row of free standing floor mounted panels. Each circuit shall have a separate vertical panel with distinct compartments for circuit breaker truck, cable termination, main bus-bars and auxiliary control devices. The adjacent panels shall be completely separated by steel sheets except in bus-bar compartments. The Service Class Continuity of Switchgears shall be LSC 2B-PM (as per IS/IEC 62271-200) • The Switchgear shall have an Internal Arc Classification of IAC AFLR. Switchgear shall have an internal arc of 31.5kA for 1 second.In case of any Inspection window provided on breaker compartment door, same should also be in line with IAC classifications. comprising of 1250Amp, continuous rated Copperbusbars and droppers, 01nos. Rack-In-Rack-Out Handle, structure made from AluZinc/GI sheets to prevent corrosion and rusting. |
| 2226 | The complete panel incl. HT and LT chamber shall be manufactured by approved OEM at its own facility, and same will be verified via stage/final inspection. License parter, system integrator, panel builder, half-panel concept is not allowed. 33 KV 4 VCB HT Panel fully encapsulated pole VCB breakers (1 incomer and 3 out goings), totally enclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker, having capacities as mentioned below, single break, trip free mechanism, motorised charged and auto closing breaker suitable for use on 33 KV, 3 Phase, 50 Hz A. C. supply with short circuit fault level of 31.5 kA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but continuous rated Copperbusbars and droppers , Cu. earth bar, earth bar, breaker featured with mechanical ON / OFF indicator with hand trip device, spring release coil, shunt trip coil, control voltage of 24 Volt DC, TNC, LED type indicating lamps for phases and trip conditions and auxiliary switch of 6 NO + 6 NC and equipped with following switchgears and accessories. |
| 2227 | The panel should be suitable for connections for up to 3 x 300 sq.mm XLPE 11 KV cable (cable entry from bottom/top/side), end termination with heat shrinkable jointing material etc. as required. (The Cost of end termination not included in this item) |
| 2228 | power pack( 1 working & 1 standby) with 220 Volt AC input & 24 Volt DC continuous output suitable for indicating lights &closing / tripping / indication of 5 Nos. HT panel boards with 2 Nos. 12 Volts each maintenance free batteries of suitable AH (Min 4 Hrs back up for each relays & indication) each, charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter & Voltmeter i/c connections with 2.5 sq.mm FRLS insulated copper conductor cable etc. including DC DB consisting of required MCB\"s for DC supply distribution to panels as required. |
| 2229 | Makes : -L&T/ABB/Siemens/ Crompton Greaves /SCHNEIDER |
| 2230 | INCOMING |
| 2231 | 2 Nos. 1250 Amp. VCB breakers with followings in each breaker - |
| 2232 | 11kV, 1250Amp, 31.5kA/3-sec, Draw-Out Vacuum Circuit Breaker as per IEC-62271-100. Vacuum Circuit Breaker having 03 Nos. encapsulated vacuum bottles of same make as of circuit breaker, motorized spring charging mechanism (230VAC) with integral spring charging handle for manual charging, associated push-buttons, anti-pumping feature, and associated Shunt Trip/Close Coils (24VDC) |
| 2233 | (a) 1 set (3 nos) 11 kv / v3 / 110 / v3 Volts drawout type PT Class 0.5 accuracy and 50 VA burden with 1 No. Voltmeter (0-36 KV), digital type, selector switch for voltmeter and protection fuses/MCB for HT metering. |
| 2234 | (b) 3 nos. dual core dual ratio CTs of ratio 200/100/1/1A of 7.5 VA burden and accuracy class-0.5 for metering and class 5P10 for protection. |
| 2235 | (c) 1 No. - (0-200A) Ammeter, digital type with selector switches. |
| 2236 | (d) Main Protection Relay shall be numerical IED Relay confirming to IEC60255, having 04CT+05PT Inputs with microprocessor based protection scheme for tripping the breaker on various faults like (1) directional over-current or earth-fault in any of the three phases, (2) negative sequence currents due to line-to-line or conductor-break faults, (3) residual and three-phase under-voltages/over-voltages(4) Synchronism and Energizing Check before breaker closing to prevent un-syncronized mixing of supplies(5) circuit-breaker-failure alarm, (6) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.The relay shall be fully integrated with the feeder, internally capturing feeder statuses incl. various status, Line-Current, Line-Voltage etc. and display the same locally on a built-in back-lit LCD screen as a Single-Line-Diagram with power & frequency measurements and suitably labelled status LEDs.TCP/IP based WebHMI shall be integrated part of relay for remote setting without requiring any special relay software.Offered relay shall have integrated arc protection which should be based on the detection of current and light simultaneously. |
| 2237 | (e) Master trip relay |
| 2238 | (f) Trip circuit supervision relay |
| 2239 | (g) Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, KVAH, KVARH, PF, HZ &MDI with RS 485 port. |
| 2240 | (h) Timer and TNC switch |
| 2241 | OUTGOING |
| 2242 | 4 Nos. - 630 A VCB breakers with followings in each breaker - |
| 2243 | 11kv, 630Amp, 31.5kA/3-sec, Draw-Out Vacuum Circuit Breaker as per IEC-62271-100. Vacuum Circuit Breaker having 03 Nos. encapsulated vacuum bottles of same make as of circuit breaker, motorized spring charging mechanism (230VAC) with integral spring charging handle for manual charging, associated push-buttons, anti-pumping feature, and associated Shunt Trip/Close Coils (24VDC) |
| 2244 | Note - Provide all type of Protection, Auxillary relays, release for the transformer protection as the outgoing feeders shall feeds the power to transformer. |
| 2245 | (a) 3 nos. dual core dual ratio CTs of ratio 50/1/1A of 7.5 VA burden and accuracy class-1 for metering and class 5P10 for protection. |
| 2246 | (b) (0-50A) Ammeters, dual scale digital type & selector switches for ammeters. |
| 2247 | (c) Main Protection Relay shall be numerical IED Relay confirming to IEC60255, having 04CT+05PT Inputs with microprocessor based protection scheme for tripping the breaker on various faults like (1) directional over-current or earth-fault in any of the three phases, (2) negative sequence currents due to line-to-line or conductor-break faults, (3) residual and three-phase under-voltages/over-voltages(4) Synchronism and Energizing Check before breaker closing to prevent un-syncronized mixing of supplies(5) circuit-breaker-failure alarm, (6) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.The relay shall be fully integrated with the feeder, internally capturing feeder statuses incl. various status, Line-Current, Line-Voltage etc. and display the same locally on a built-in back-lit LCD screen as a Single-Line-Diagram with power & frequency measurements and suitably labelled status LEDs.TCP/IP based WebHMI shall be integrated part of relay for remote setting without requiring any special relay software.Offered relay shall have integrated arc protection which should be based on the detection of current and light simultaneously. |
| 2248 | (d) 12 window Annunciation panel with necessary relays, audio and visual indicators and push buttons. |
| 2249 | (e) Auxilliary relay for Buchholtz / OTI / WTI |
| 2250 | (f) TNC switch |
| 2251 | (g) Master trip relay |
| 2252 | (h) Trip circuit supervision relay |
| 2253 | Supply,installation, testing & commissioning of indoor type floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 54,The switchgear boards shall have a single front, single tier, fully compartmentalized, metal enclosed construction complying with clause No. 3.102 of IEC 62271-200, comprising of a row of free standing floor mounted panels. Each circuit shall have a separate vertical panel with distinct compartments for circuit breaker truck, cable termination, main bus-bars and auxiliary control devices. The adjacent panels shall be completely separated by steel sheets except in bus-bar compartments. The Service Class Continuity of Switchgears shall be LSC 2B-PM (as per IS/IEC 62271-200) • The Switchgear shall have an Internal Arc Classification of IAC AFLR. Switchgear shall have an internal arc of 31.5kA for 1 second.In case of any Inspection window provided on breaker compartment door, same should also be in line with IAC classifications. comprising of 1250Amp, continuous rated Copperbusbars and droppers, 01nos. Rack-In-Rack-Out Handle, structure made from AluZinc/GI sheets to prevent corrosion and rusting. |
| 2254 | The complete panel incl. HT and LT chamber shall be manufactured by approved OEM at its own facility, and same will be verified via stage/final inspection. License parter, system integrator, panel builder, half-panel concept is not allowed. 33 KV 4 VCB HT Panel fully encapsulated pole VCB breakers (1 incomer and 3 out goings), totally enclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker, having capacities as mentioned below, single break, trip free mechanism, motorised charged and auto closing breaker suitable for use on 33 KV, 3 Phase, 50 Hz A. C. supply with short circuit fault level of 31.5 kA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but continuous rated Copperbusbars and droppers , Cu. earth bar, earth bar, breaker featured with mechanical ON / OFF indicator with hand trip device, spring release coil, shunt trip coil, control voltage of 24 Volt DC, TNC, LED type indicating lamps for phases and trip conditions and auxiliary switch of 6 NO + 6 NC and equipped with following switchgears and accessories. |
| 2255 | The panel should be suitable for connections for up to 3 x 300 sq.mm XLPE 11 KV cable (cable entry from bottom/top/side), end termination with heat shrinkable jointing material etc. as required. (The Cost of end termination not included in this item) |
| 2256 | power pack( 1 working & 1 standby) with 220 Volt AC input & 24 Volt DC continuous output suitable for indicating lights &closing / tripping / indication of 5 Nos. HT panel boards with 2 Nos. 12 Volts each maintenance free batteries of suitable AH (Min 4 Hrs back up for each relays & indication) each, charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter & Voltmeter i/c connections with 2.5 sq.mm FRLS insulated copper conductor cable etc. including DC DB consisting of required MCB\"s for DC supply distribution to panels as required. |
| 2257 | Makes : -L&T/ABB/Siemens/ Crompton Greaves |
| 2258 | INCOMING |
| 2259 | 1 Nos. 630 Amp. VCB breakers with followings in each breaker - |
| 2260 | 11kV, 630Amp, 31.5kA/3-sec, Draw-Out Vacuum Circuit Breaker as per IEC-62271-100. Vacuum Circuit Breaker having 03 Nos. encapsulated vacuum bottles of same make as of circuit breaker, motorized spring charging mechanism (230VAC) with integral spring charging handle for manual charging, associated push-buttons, anti-pumping feature, and associated Shunt Trip/Close Coils (24VDC) |
| 2261 | (a) 1 set (3 nos) 11 kv / v3 / 110 / v3 Volts drawout type PT Class 0.5 accuracy and 50 VA burden with 1 No. Voltmeter (0-36 KV), digital type, selector switch for voltmeter and protection fuses/MCB for HT metering. |
| 2262 | (b) 3 nos. dual core dual ratio CTs of ratio 200/100/1/1A of 7.5 VA burden and accuracy class-0.5 for metering and class 5P10 for protection. |
| 2263 | (c) 1 No. - (0-200A) Ammeter, digital type with selector switches. |
| 2264 | (d) Main Protection Relay shall be numerical IED Relay confirming to IEC60255, having 04CT+05PT Inputs with microprocessor based protection scheme for tripping the breaker on various faults like (1) directional over-current or earth-fault in any of the three phases, (2) negative sequence currents due to line-to-line or conductor-break faults, (3) residual and three-phase under-voltages/over-voltages(4) Synchronism and Energizing Check before breaker closing to prevent un-syncronized mixing of supplies(5) circuit-breaker-failure alarm, (6) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.The relay shall be fully integrated with the feeder, internally capturing feeder statuses incl. various status, Line-Current, Line-Voltage etc. and display the same locally on a built-in back-lit LCD screen as a Single-Line-Diagram with power & frequency measurements and suitably labelled status LEDs.TCP/IP based WebHMI shall be integrated part of relay for remote setting without requiring any special relay software.Offered relay shall have integrated arc protection which should be based on the detection of current and light simultaneously. |
| 2265 | (e) Master trip relay |
| 2266 | (f) Trip circuit supervision relay |
| 2267 | (g) Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, KVAH, KVARH, PF, HZ &MDI with RS 485 port. |
| 2268 | (h) Timer and TNC switch |
| 2269 | OUTGOING |
| 2270 | 3 Nos. - 630 A VCB breakers with followings in each breaker - |
| 2271 | 11kV, 630Amp, 31.5kA/3-sec, Draw-Out Vacuum Circuit Breaker as per IEC-62271-100. Vacuum Circuit Breaker having 03 Nos. encapsulated vacuum bottles of same make as of circuit breaker, motorized spring charging mechanism (230VAC) with integral spring charging handle for manual charging, associated push-buttons, anti-pumping feature, and associated Shunt Trip/Close Coils (24VDC) |
| 2272 | Note - Provide all type of Protection, Auxillary relays, release for the transformer protection as the outgoing feeders shall feeds the power to transformer. |
| 2273 | (a) 3 nos. dual core dual ratio CTs of ratio 50/1/1A of 7.5 VA burden and accuracy class-1 for metering and class 5P10 for protection. |
| 2274 | (b) (0-50A) Ammeters, dual scale digital type & selector switches for ammeters. |
| 2275 | (c) Main Protection Relay shall be numerical IED Relay confirming to IEC60255, having 04CT+05PT Inputs with microprocessor based protection scheme for tripping the breaker on various faults like (1) directional over-current or earth-fault in any of the three phases, (2) negative sequence currents due to line-to-line or conductor-break faults, (3) residual and three-phase under-voltages/over-voltages(4) Synchronism and Energizing Check before breaker closing to prevent un-syncronized mixing of supplies(5) circuit-breaker-failure alarm, (6) tripping-circuit-failures and interpanel tripping/blocking signals via GOOSE based peer-to-peer communication, on IEC61850 protocol.The relay shall be fully integrated with the feeder, internally capturing feeder statuses incl. various status, Line-Current, Line-Voltage etc. and display the same locally on a built-in back-lit LCD screen as a Single-Line-Diagram with power & frequency measurements and suitably labelled status LEDs.TCP/IP based WebHMI shall be integrated part of relay for remote setting without requiring any special relay software.Offered relay shall have integrated arc protection which should be based on the detection of current and light simultaneously. |
| 2276 | (d) 12 window Annunciation panel with necessary relays, audio and visual indicators and push buttons. |
| 2277 | (e) Auxilliary relay for Buchholtz / OTI / WTI |
| 2278 | (f) TNC switch |
| 2279 | (g) Master trip relay |
| 2280 | (h) Trip circuit supervision relay |
| 2281 | Main L.T. Panel |
| 2282 | Design, manufacture, supply ,installation, inspection, handling, assembling, affecting proper connections, testing and commissioningof 14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel with PLC based load manager, floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 54. The bubsbar shall be of aluminium. The main LT panel shall be as per IEC 61439 (TTA).Authorized certificate and agreement copy with OEM to be submit while drawing approvals through contractor. Tender based authorization or any other certifications shall not be valid. No changes in the IEC shall be allowed at the time or after tendering. |
| 2283 | All ACB\"s shall have inbuiltmicroprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec.All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947. |
| 2284 | All ACB Incomer shall be 4P,EDO,LSIG ,with display and communication module for real data assessment like events,fault and all current parameters |
| 2285 | All MCCB above 250A, shall be microprocessor based with inbuilt OL,SC,EF protections.MCCB 250A & below shall be thermal based OL,SC |
| 2286 | All MCCB\"s shall be Ics = 100% Icu, with rotary handle, phase barriers, spreader terminals & pad locking arrangement, with adjustable O/L &adjustable S/Ctrip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. |
| 2287 | The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT\"s & PT\"s, etc. Separate CT\"s shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA. |
| 2288 | Each section ofPanel shall have door opearted light of sufficent luxto illumunate that section & each section of capacitor, buscoupler, all ACBs sections shall have exhaust fans for ventilation purpose. Each section of panel shall be provided with space heater alonwith thermostate and suitable arrangment for automatic operation. |
| 2289 | AllEnergy Analyser / TVM Shall have RS 485 Modbus RTU on board Communication protocol for SCADA communication. |
| 2290 | The fault withstanding capacity of panel & its control gear shall be min.35 KA rms for 1 sec. |
| 2291 | The maximum height of the panel should not exceed 2100 mm unless specifically approved. |
| 2292 | Amp. Meter for all outgoings |
| 2293 | GA drawings shall be got approved before fabrication.The panel has to be specifically fabricated as per the space available at basement level. The existing column positions will also be considered. |
| 2294 | INCOMERS from 3 Nos.2500 KVA Transformers |
| 2295 | 3 Nos ACB 4000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2296 | The ACB shall be electrically and mechanically interlocked with the bus coupler, DG incomers and other transformer incomers. |
| 2297 | 3 nos. 32 amp TP MCCB (35 KA) for OLTC (for each transformer incomer) |
| 2298 | Protection releases / relays, Metering & Accessories for each Transformer incomers |
| 2299 | Over Voltage / Under Voltage relay / release with timer. |
| 2300 | Restricted earth fault relay. |
| 2301 | Master trip relay. |
| 2302 | Trip Circuit Supervison relay. |
| 2303 | TNC switch. |
| 2304 | Auto manual selector switch. |
| 2305 | 1 nos. 0-500 volt range digital type voltmeter with selector switch |
| 2306 | 1 set of 3 CT\"s of ratio 4000/5A, Class 1.0 accuracy 15 VA burden for metering. |
| 2307 | 1 set of 3 CT\"s of ratio 4000/5A, Class 1.0 accuracy 15 VA burden for APFCR. |
| 2308 | 1 set - 415 / v3 / 110 / v3Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse. |
| 2309 | 1 set of 4 CT\"s of ratio 4000/1A, Class PS for protection. |
| 2310 | 1 no. 0-2000 Amprange digital type ammeter with selector switch. |
| 2311 | Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485communication port for communication / report generation. (or Dual meter) |
| 2312 | Power factor meter. |
| 2313 | Frequency meter. |
| 2314 | 4 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons. |
| 2315 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB. |
| 2316 | INCOMERS from 2 Nos 1000 KVA D G sets |
| 2317 | 2 nos ACB 1600A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2318 | INCOMERS from 1 Nos 500 KVA D G sets |
| 2319 | 1 nos ACB 800A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2320 | Protection releases / relays, Metering & Accessories for each D G set incomers |
| 2321 | Over Voltage / Under Voltage relay / release with timer. |
| 2322 | IDMT earth fault relay. |
| 2323 | Master trip relay. |
| 2324 | Trip Circuit Supervison relay. |
| 2325 | Reverse power relay. |
| 2326 | TNC switch. |
| 2327 | Auto / manual / test selector switch |
| 2328 | 1 Set - 415/v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB. |
| 2329 | 0-63 volt range digital type voltmeter with selector switch |
| 2330 | 1 set - 3 CTs of suitable ratio for every DG , Class 1.0 accuracy 15 VA each burdenfor metering. |
| 2331 | 1 set - 3 CTs of suitable ratio , Class 5P20 accuracy 20 VA each burdenfor protection. |
| 2332 | 0-800 Amprange digital type ammeter with selector switch. |
| 2333 | Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485communication port for communication / report generation. (or Dual meter) |
| 2334 | Frequency meter. |
| 2335 | Power Factor meter. |
| 2336 | 1No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing. |
| 2337 | 3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons. |
| 2338 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. |
| 2339 | 12 window annunciator with accept / reset / test push buttonfor each DG set for following indications and alarm :set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares. |
| 2340 | Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop. |
| 2341 | Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps. |
| 2342 | D G control incorporating engine start / stop indicating three attempt facility and on failure to start, engine lock out. |
| 2343 | 1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (1010 KVA) |
| 2344 | Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available. In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. There shall be one push button to acknowledge the same. |
| 2345 | The ACB shall be electrically and mechanically interlocked with the bus coupler and Transformer incomers. |
| 2346 | BUS COUPLER |
| 2347 | 2 Nos ACB 4000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2348 | Protection releases / relays, Metering & Accessories for Bus Coupler (s) |
| 2349 | Trip circuit supervision relay |
| 2350 | TNC switch. |
| 2351 | Auto / manual selector switch |
| 2352 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. |
| 2353 | The bus coupler shall be electrically and mechanically interlocked with all incomingACB\"s in such a way that at any one time two supply should not get mixed up. |
| 2354 | BUS BARS |
| 2355 | 3 sections of5000 AMP, 415 Volts, 3 phase 50 HZTPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coading and insulated by heat shrinkable sleeves and clip on shrouds for joints. |
| 2356 | The current density of bus bar up to 1000 Amp shall be minimum 1.00 sq mm / amp & for 1250 / 1600 amp shall be minimum 1.30 sq.mm / amp and for 2000 / 2500 / 3200 Amp shall be minimum 1.60 sq mm / amp. |
| 2357 | The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above design ambient temperature of 50 deg C. |
| 2358 | Bus PT Module 5 Nos.,each with Following: |
| 2359 | 3PH. 415/v3/110/v3 V 100VA with Fuses. |
| 2360 | R,Y,B Ind. Light with Control Fuses |
| 2361 | Voltage Relay |
| 2362 | (Note - All the indication & metering shall be done through 110V from secondary of PT\"s. No indication lamps & metering should not be operated at 415 Volts.) |
| 2363 | PLC for load management / automation |
| 2364 | Design, manufacturing, testing at works, supply of PLC BASED , AUTOLOAD TRANSFER, AUTOLOAD BALANCING PANEL FOR 2 nos. 500 KVA complete as required to acheive the desired functions. |
| 2365 | PLC shall be provided in main LT panel for interlocking between different incomers and bus couplers to avoid unintentional paralleling of different supplies. |
| 2366 | PLC is not envisazed for D G synchronization |
| 2367 | PLC with VIEW PANEL. |
| 2368 | In addition to required hardware and software following components shall also be provided. |
| 2369 | Based on the load requirement only required no. of DG sets shall beoperated. |
| 2370 | Monitoring of DG set safeties (mechanical as well as electrical). |
| 2371 | PLC Hardware as required |
| 2372 | Auxiliary relays/contactor/metering/protection etc as required |
| 2373 | 230 V AC, UPSalognwith battery of suitable back up of suitable rating |
| 2374 | Annunciators as required |
| 2375 | One no. Battery charger set consisting of Transformer / Rectifier, DC ammeter, DC voltmeter, Charging rate selector switch, Off/Trickle/boost. |
| 2376 | All control wiring from PLC to various feeders with min. of 2.5 sq mm copper FRLS cable. |
| 2377 | The PLC provided for Load Management &for interlocking of Breakers shall perform to achieve the system as described in given Main Schemetic Diagram. |
| 2378 | OUTGOINGS- |
| 2379 | All outgoing feeders shall be provided with one set of phase indication lamps and trip indication lamps with protection fuses/MCB and ammeter with selector switch with suitable ratio CT\"s of accuracy class 1.0 |
| 2380 | All outgoing feeders fed from DG Bus Bar shall be provided with energy analyser / electronic dual reading KWHR meter with RS 485 communication port, CT\"s with accuracy class 1, control circuits and wiring as per SLD. |
| 2381 | 4 nos ACB 2000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2382 | 3 nos ACB 1600A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2383 | 3 nos ACB 1000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2384 | 2 nos. 400 AMPS 4P MCCB. (35 KA) |
| 2385 | 2 nos.320 AMPS 4P MCCB. (35 KA) |
| 2386 | 4 nos.200 AMPS 4P MCCB. (35 KA) |
| 2387 | 4 Nos. 100 Amps 4P MCCB(35KA) |
| 2388 | Panel Builder Make: ABB (ARTUK)/ SCHNEIDER (BLOCK SET) / SIEMENS (SIVAKON) / L&T(TERRA) |
| 2389 | Design, manufacture, supply ,installation, inspection, handling, assembling, affecting proper connections, testing and commissioningof 14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel with PLC based load manager, floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 54. The bubsbar shall be of aluminium. The main LT panel shall be as per IS 61439 (TTA).Authorized certificate and agreement copy with OEM to be submit while drawing approvals through contractor. Tender based authorization or any other certifications shall not be valid. No changes in the IEC shall be allowed at the time or after tendering. |
| 2390 | All ACB\"s shall have inbuiltmicroprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec.All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947. |
| 2391 | All ACB Incomer shall be 4P,EDO,LSIG ,with display and communication module for real data assessment like events,fault and all current parameters |
| 2392 | All MCCB above 250A, shall be microprocessor based with inbuilt OL,SC,EF protections.MCCB 250A & below shall be thermal based OL,SC |
| 2393 | All MCCB\"s shall be Ics = 100% Icu, with rotary handle, phase barriers, spreader terminals & pad locking arrangement, with adjustable O/L &adjustable S/Ctrip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. |
| 2394 | The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT\"s & PT\"s, etc. Separate CT\"s shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA. |
| 2395 | Each section ofPanel shall have door opearted light of sufficent luxto illumunate that section & each section of capacitor, buscoupler, all ACBs sections shall have exhaust fans for ventilation purpose. Each section of panel shall be provided with space heater alonwith thermostate and suitable arrangment for automatic operation. |
| 2396 | AllEnergy Analyser / TVM Shall have RS 485 Modbus RTU on board Communication protocol for SCADA communication. |
| 2397 | The fault withstanding capacity of panel & its control gear shall be min.35 KA rms for 1 sec. |
| 2398 | The maximum height of the panel should not exceed 2100 mm unless specifically approved. |
| 2399 | GA drawings shall be got approved before fabrication.The panel has to be specifically fabricated as per the space available at basement level. The existing column positions will also be considered. |
| 2400 | INCOMERS from 2 Nos.2500 KVA Transformers |
| 2401 | 2 Nos ACB 4000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2402 | The ACB shall be electrically and mechanically interlocked with the bus coupler, DG incomers and other transformer incomers. |
| 2403 | 2 nos. 32 amp TP MCCB (35 KA) for OLTC (for each transformer incomer) |
| 2404 | Protection releases / relays, Metering & Accessories for each Transformer incomers |
| 2405 | Over Voltage / Under Voltage relay / release with timer. |
| 2406 | Restricted earth fault relay. |
| 2407 | Master trip relay. |
| 2408 | Trip Circuit Supervison relay. |
| 2409 | TNC switch. |
| 2410 | Auto manual selector switch. |
| 2411 | 1 nos. 0-500 volt range digital type voltmeter with selector switch |
| 2412 | 1 set of 3 CT\"s of ratio 4000/5A, Class 1.0 accuracy 15 VA burden for metering. |
| 2413 | 1 set of 3 CT\"s of ratio 4000/5A, Class 1.0 accuracy 15 VA burden for APFCR. |
| 2414 | 1 set - 415 / v3 / 110 / v3Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse. |
| 2415 | 1 set of 4 CT\"s of ratio 4000/1A, Class PS for protection. |
| 2416 | 1 no. 0-2000 Amprange digital type ammeter with selector switch. |
| 2417 | Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485communication port for communication / report generation. (or Dual meter) |
| 2418 | Power factor meter. |
| 2419 | Frequency meter. |
| 2420 | 4 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons. |
| 2421 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB. |
| 2422 | INCOMERS from 2 Nos 250 KVA D G sets |
| 2423 | 2 nos. 400 AMPS TP MCCB. (50 KA) electronic release + with 400 amp. Four pole power contactor. |
| 2424 | Protection releases / relays, Metering & Accessories for each D G set incomers |
| 2425 | Over Voltage / Under Voltage relay / release with timer. |
| 2426 | IDMT earth fault relay. |
| 2427 | Master trip relay. |
| 2428 | Trip Circuit Supervison relay. |
| 2429 | Reverse power relay. |
| 2430 | TNC switch. |
| 2431 | Auto / manual / test selector switch |
| 2432 | 1 Set - 415/v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB. |
| 2433 | 0-63 volt range digital type voltmeter with selector switch |
| 2434 | 1 set - 3 CTs of suitable ratio for every DG , Class 1.0 accuracy 15 VA each burdenfor metering. |
| 2435 | 1 set - 3 CTs of suitable ratio , Class 5P20 accuracy 20 VA each burdenfor protection. |
| 2436 | 0-400 Amprange digital type ammeter with selector switch. |
| 2437 | Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485communication port for communication / report generation. (or Dual meter) |
| 2438 | Frequency meter. |
| 2439 | Power Factor meter. |
| 2440 | 1No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing. |
| 2441 | 3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons. |
| 2442 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. |
| 2443 | 12 window annunciator with accept / reset / test push buttonfor each DG set for following indications and alarm :set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares. |
| 2444 | Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop. |
| 2445 | Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps. |
| 2446 | D G control incorporating engine start / stop indicating three attempt facility and on failure to start, engine lock out. |
| 2447 | 1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (1010 KVA) |
| 2448 | Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available. In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. There shall be one push button to acknowledge the same. |
| 2449 | The ACB shall be electrically and mechanically interlocked with the bus coupler and Transformer incomers. |
| 2450 | BUS COUPLER |
| 2451 | 1 Nos ACB 4000A 4P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2452 | Protection releases / relays, Metering & Accessories for Bus Coupler (s) |
| 2453 | Trip circuit supervision relay |
| 2454 | TNC switch. |
| 2455 | Auto / manual selector switch |
| 2456 | 5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB. |
| 2457 | The bus coupler shall be electrically and mechanically interlocked with all incomingACB\"s in such a way that at any one time two supply should not get mixed up. |
| 2458 | BUS BARS |
| 2459 | 3 sections of5000 AMP, 415 Volts, 3 phase 50 HZTPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coading and insulated by heat shrinkable sleeves and clip on shrouds for joints. |
| 2460 | The current density of bus bar up to 1000 Amp shall be minimum 1.00 sq mm / amp & for 1250 / 1600 amp shall be minimum 1.30 sq.mm / amp and for 2000 / 2500 / 3200 Amp shall be minimum 1.60 sq mm / amp. |
| 2461 | The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above design ambient temperature of 50 deg C. |
| 2462 | Bus PT Module 5 Nos.,each with Following: |
| 2463 | 3PH. 415/v3/110/v3 V 100VA with Fuses. |
| 2464 | R,Y,B Ind. Light with Control Fuses |
| 2465 | Voltage Relay |
| 2466 | (Note - All the indication & metering shall be done through 110V from secondary of PT\"s. No indication lamps & metering should not be operated at 415 Volts.) |
| 2467 | PLC for load management / automation |
| 2468 | Design, manufacturing, testing at works, supply of PLC BASED , AUTOLOAD TRANSFER, AUTOLOAD BALANCING PANEL FOR 2 nos. 500 KVA complete as required to acheive the desired functions. (Make : ALLEN BRADLEY / SIEMENS / MITSUBISHI / ABB) |
| 2469 | PLC shall be provided in main LT panel for interlocking between different incomers and bus couplers to avoid unintentional paralleling of different supplies. |
| 2470 | PLC is not envisazed for D G synchronization |
| 2471 | PLC with VIEW PANEL. |
| 2472 | In addition to required hardware and software following components shall also be provided. |
| 2473 | Based on the load requirement only required no. of DG sets shall beoperated. |
| 2474 | Monitoring of DG set safeties (mechanical as well as electrical). |
| 2475 | PLC Hardware as required |
| 2476 | Auxiliary relays/contactor/metering/protection etc as required |
| 2477 | 230 V AC, UPSalognwith battery of suitable back up of suitable rating |
| 2478 | Annunciators as required |
| 2479 | One no. Battery charger set consisting of Transformer / Rectifier, DC ammeter, DC voltmeter, Charging rate selector switch, Off/Trickle/boost. |
| 2480 | All control wiring from PLC to various feeders with min. of 2.5 sq mm copper FRLS cable. |
| 2481 | The PLC provided for Load Management &for interlocking of Breakers shall perform to achieve the system as described in given Main Schemetic Diagram. |
| 2482 | OUTGOINGS- |
| 2483 | All outgoing feeders shall be provided with one set of phase indication lamps and trip indication lamps with protection fuses/MCB and ammeter with selector switch with suitable ratio CT\"s of accuracy class 1.0 |
| 2484 | All outgoing feeders fed from DG Bus Bar shall be provided with energy analyser / electronic dual reading KWHR meter with RS 485 communication port, CT\"s with accuracy class 1, control circuits and wiring as per SLD. |
| 2485 | 4 nos ACB 2000A 3P EDO OL,SC,EF with display (minimum 03 line & maximum 04 line) with communication module for real data assessment like events,fault and all current parameters |
| 2486 | 2 nos.630 AMPS TP MCCB. (35 KA) |
| 2487 | 5 nos.500 AMPS TP MCCB. (35 KA) |
| 2488 | 2 nos. 400 AMPS TP MCCB. (35 KA) |
| 2489 | 2 nos.320 AMPS TP MCCB. (35 KA) |
| 2490 | 4 nos.250 AMPS TP MCCB. (35 KA) |
| 2491 | 4 nos.200 AMPS TP MCCB. (35 KA) |
| 2492 | 4 Nos. 100 Amps FP MCCB(35KA) |
| 2493 | Main LT Panelas described above |
| 2494 | ACB Make: Schinder, L&T,ABB,Siemens |
| 2495 | MCCB Make: Schinder, L&T,ABB,Siemens |
| 2496 | Panel Builder Make: ABB (ARTUK)/ SCHNEIDER (BLOCK SET) / SIEMENS (SIVAKON) / L&T(TERRA) |
| 2497 | Hybrid POWER FACTOR CORRRECTION PANEL - (800KVAR+300Amp)Design and supply ofHybrid Power Factor Correction Panel (APFC) of capacity 440V, 3-phase, 50 Hz., The passive 800 KVAr stage ratings shall be 2x25kVAr + 3x50kVAr + 6x100kVAr. The APFC Panel shall be fully type tested and shall comply to IEC 61439-1&2 and IEC 61921 Or IS 16636-2017. The APFC Panel shall be (Indoor) type,weather, dust and vermin proof. The degree of protection of enclosures system of the APFC Panel shall be min. IP41 in accordance with IEC 60529. The capacitor bank shall be Internet of things (IoT) enabled and communicable/ integrable with EMS .The APFC panel should have the capability for environmental monitoring where it is able to provide the real time data for the temperature and humidity inside the panel ambient. The environmental sensors shall be used with a access point, which can be used for multiple sensors, using Green Power wireless communication protocol to transfer the information on real time basis to have the exact and detailed temperature monitoring of the Cap bank conforming to IS13341:1992 & IS 13440:1993 floor mounted design, weather, dust and vermin proof suitable for humidity up to 95%. Average daily temperature: +35°C max, Ambient temperature: -5°C to 40°C, Maximum altitude: 2000 m above sea level. |
| 2498 | Approved Makes- ABB / Schneider / Siemens /L&T make only. The OEM\"s specified cannot authorize any other partners / sub vendors to manufacture APFC Panels on their behalf. The APFC Panel manufactured by OEM\"s only will be accepted & factory acceptance test ( FAT ) will be carried out at OEM\"s plant only. |
| 2499 | (A) Insulated bus bar assembly made from Aluminium and rated of 1800 Amps capacity. The short circuit withstand capacity shall be 65 KA / 1 Sec ( Icw) for the main bus bar and the rated impulse withstand voltage shall be 6 KV. |
| 2500 | ( B)The incomer of the APFC Panel shall be a 2000 Amp, ACB, 3P, 50kAMicroprocessor based ET trip systems with thermal memory with O/L & S/C protection, Icu=Ics=Icw=50kA for 1sec @440V, ACB shall have standard extended rotary handle, spreaders, phase barrier. ACB shall be of certified designconfirming toIEC 60947-1,2 & 3. |
| 2501 | (C) Capacitor Units: The capacitor unit shall be metalized polypropylene film with Zn / Al alloy. The capacitors shall be encapsulated in an aluminium can. The capacitor unit shall have a rated voltage of 480V and shall have a maximum over current capacity of1.8 In & Peak inrush Current 250In. The capacitor unit shall have a built in 3 phase over pressure protection and shall have discharge resistors (50V in 1min) factory fitted and shall be tamper proof. Capacitance Tolerance -5%, +10%. Maximum permissible over voltage 1.1 x Un, 8 h every 24 h. The capacitor unit shall be of certified design confirming to IS-13340-1993, 13341-1992 & IEC -60831-1&2. |
| 2502 | (D) Reactors : The de-tuning reactors shall be connected in series with each capacitor stage and shall be of iron cored type. The reactors shall have relative impedance of 7%, with a de-tuning frequency of 190 Hz. approx.The reactors shall have built in thermostats to protect from overheating. The reactor insulation shall be min. Class “H” rated at 180 degree C.. The reactors shall be of certified designconfirming to IEC-60076 - 6. |
| 2503 | (E) Short-circuit and Overload Protection : Each stage of the APFC Panel shall have a suitably rated MCCB with an electronic over-current relay for short-circuit and overload protection. The electronic over-current relay shall be adjusted to trip if the RMS current of the stage exceeds the overload setting. The MCCB shall be of certified designconfirming toIEC 60947-1,2 & 3. |
| 2504 | (F) PF Regulator : Advanced Range PF Regulator shall have 10 steps with a LCD Display, Voltage Range : 90V - 550V, 50, CT Input :1A/5A with a built in RS 485 communication port. The PF Regulator shall be of certified designconfirming toIEC 61326. |
| 2505 | (G) In addition to the PF Controller, the capacitor bank, should also have an energy serverwhich would collect, store, and provides web access and visualization to various energy parameters and enable remote supervision from BMS. To ensure maximum utilization, enable remote commissioning / trouble shooting of the capacitor bank, the energy server should monitor and display the following parameters remotely through a Web Page.- Status of stages (open / close / faulty).- Real time capacitance value of the connected stage.- Initial capacitance value.- Number of operation of stages ( stage utilization / operation)- energy parameters like : I, V , P , Q, S , Operating PF, Target PF, Operating Temperature , Max Temperature, % THD V,%THD I- Display of alarms - Trending curves of historical recorded data. |
| 2506 | (H) Stage Contactor: The electromagnetic contactors shall be rated for 660 Volts and shall be capacitor duty 3-pole type and shall be employed for switching \"on\" and switching \"off\" operations in capacitor banks. The rated voltage of control coil shall be 415V (phase-to-phase). This voltage is subject to a variation of (+) 10% and (-) 15%. The contactor shall be AC3b type.Thecontactor shall be of certified designconfirming to IEC60947-1 & 4-1. |
| 2507 | (I) Ventilating fans of required size shall be used to dissipate the heat produced by the capacitor bank components like the capacitor units, reactors, contactors, breakers etc. The capacitor banks shall be of type tested design and temperature rise test report of the capacitor bank. |
| 2508 | (J)Hybrid panelshould be ethernet enabled comprising of at least (300 amp) ofIGBT based active filter ( harmonics , Power factorCompensation)suitable for operation on 415 ±10%volts, 50 Hz AC 3 phase 3 wire supply system, Require IGBTs with 3 level topology Inverter,2nd to 51st, discrete; fully selectable per harmonic order (amplitude and on/off), base active technology Control response time 25µs, Harmonic mitigation required less than 2 cycle & power factor Correction type should be less than 1/4th cycle.Harmonic attenuation more than 97% .Active Filter, Standards compliance/certification:- CULUS (UL508 , CSA 22.2 No. 14) ,CE Certified, ABS, |
| 2509 | The HYBRID PFC Panel, should also have an energy serverwhich would collect, store, and provides web access and visualization to various energy parameters and enable remote supervision. To ensure maximum utilization, enable remote commissioning / trouble shooting of the capacitor bank, the energy server should monitor and display the following parameters remotely through a Web Page.- Status of Active Filter & Capacitor BanksThe Hybrid panel shall be factory built and design, design warranty, including performance warranty shall be from OEM (capacitor & AHF manufacturer). In addition to the advanced PF controller, the capacitor bank, should be IOT enabled i.e., it should collect, store, and provides web access, visualization of various energy parameters directly over ethernet network and enable remote supervision independently as well as from existing EMS. |
| 2510 | AUTOMATIC FIRE DETECTION & SUPPRESSION SYSTEM in PANEL |
| 2511 | Supply, Installation, Testing & Commissioning of Automatic Direct pressure Release LPCB (LPS 1666) approved System for Electrical Panel application utilising 1 Kg./ 2 Kg./ 4 Kg. Novec 1230/ FK5-1-12/ FK5-1-12 clean agent for Electrical Panels panels. The tested system must be approved for Enclosed and Ventilated (Natural and Forced Airlflow) Electrical Panels. The cylinder made of mild steel TPED approved along with sturdy metal bracket having direct low pressure dual discharge valve having safety brust disc for over pressurization and ball valve with open and closed option. The DLP valve having push in connector for tube to be connected with double push mechanism. The pressure guage having integrated pressure switch for visual and automatic monitoring of system pressure . The clean agent Novec 1230/ FK5-1-12/ FK5-1-12 to be filled in approved filling plant. The heart of the system linear heat sensing tube made of special polymer red colour 4mm I.D. 6mm O.D. pressurized with Nitrogen to be installed as per the OEM Manual. All the tube fittings to be OEM supplied .The system to be designed,installed and commisioned as per system manual approved by LPCB. The system installer to be trained and certiifed by OEM of the system activation during gas discharge. |
| 2512 | 2.5 LB Novec 1230/ FK5-1-12, LPCB/UL/FM approved for Enclosed and Ventilated (Natural and Forced Airflow) Electrical Panels, Direct Discharge complete system consisting of DLP Assembly with automatic valve, push in connector for tube, 2.5 LB Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. (Make: Arkonex/Pyroquench/Defender ) |
| 2513 | 5.0 LB Novec 1230/ FK5-1-12, LPCB/UL/FMapproved for Enclosed and Ventilated (Natural and Forced Airflow) Electrical Panels, Direct Discharge complete system consisting of DLP Assembly with automatic valve, push in connector for tube, 5.0 LB Novec 1230/ FK5-1-12gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. (Make:Arkonex/Pyroquench/Defender ) |
| 2514 | Linear pneumatic heat Detection Tube with all necessary fittings & supports. (Make: Arkonex/Pyroquench/Defender ) |
| 2515 | Master Control Unit with Audio Visual Alarm with wiring to make complete system operational . Thecontrol Panel should have provision for integration with fire Alarm /SCAD/BMS System. (Make: Arkonex/Pyroquench/Defender ) |
| 2516 | Supply, erection, testing & commissioning of 230 V, single phase, 2 wire, A.C. to 24V D.C. 180 AH sealed maintenance free batteries with semiconductor/ IGBT (half wave rectifier) with auto-manual trickle boost facility battery charging units complete including 1 No. Distribution board having 63 Amps DP MCB incomer and 12 No. 16/ 20 Amps DP MCBs (D.C. duty) as outgoing complete as required as per technical specifications. |
| 2517 | Supplying and laying of 1000 mm wide x 3 mm thick insulated mat made from highly electrical resistant elastomer of tested quality to withstand 65 KV dielectric strength as per IS 15652 complete in all respects. (For 11KV) |
| 2518 | Supplying and laying of 1000 mm wide x 2 mm thick insulated mat made from highly electrical resistant elastomer of tested quality to withstand 30 KV dielectric strength as per IS 15652 complete in all respects. (For LT Panels) |
| 2519 | Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross. |
| 2520 | Supply & erection of 3 core stranded aluminium conductor 11KV grade XLPE (E) (Cross linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cableconfirming to IS : 7098 (part II with latest amendments).150 sq. mm 3 core |
| 2521 | 185 sq. mm 3 core |
| 2522 | 300 sq. mm 3 core |
| 2523 | Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Bus Duct for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-66 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 150 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required800 Amps. 50 KA SC for 1 sec. |
| 2524 | 1600 A 50kA SC for 1 sec |
| 2525 | 2000 A 50kA SC for 1 sec |
| 2526 | 4000 Amps. 50 KA SC for 1 sec. |
| 2527 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of Exhaust piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass or 144 Kg/ cu m density mineral wool (non Combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints and repairing of damage to building etc. as per specifications and as required.350 mm dia.(75 mm thick insulation) |
| 2528 | 250mm dia.(75 mm thick insulation) |
| 2529 | 150mm dia.(50 mm thick insulation) |
| 2530 | Supply & fixing of SSBellow of following diameter150mm/ 250 mm dia /350mm |
| 2531 | Supply & fabrication ofD G exhaust pipe supports by M.S angle iron of size not less than 100 x 50 mm x 6/8 mm duly grouted in the wall through minimum 8 mm thick plate and with suitable MSangle / channel iron structure. The entire MS support structure should be painted by 2 coats of anti corrosive paint over primer coat of approved shade and make. The design of support to be duly approved by the Structural Consultant / Architect before fabrication and installation. incuding RCC Foundation. |
| 2532 | Supplying, Laying, terminating, testing, commissioning of folowing sizes ofCopper Conductor XLPE insulated, PVC sheathed armoured cable 1100 V grade. On surface the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required. 3 C x 2.5 sq.mm |
| 2533 | 3 C x 4 sq.mm |
| 2534 | 3 C x 6 sq.mm |
| 2535 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lensessuitable for 110Watt. to 120 Watt andConfirming to IP66 protectionhaving Company LOGO Engravedcomplete in all respect with 12100-13200 system lumens High Power LED with lenses, >110lm/W, PF>0.95, THD <10% at full load, CRI>70, Avg Life Class 50000Hrs@L70, Potted driver Set (NotCircuitory) with BIS No. written on it, Phase to phase Protection at 440V & >300V auto cut and re-start feature, fitting itself suitable for 60-65mm OD pipe |
| 2536 | Supply and erection of automatic three phase street light controller with time switch operation ON and OFF, setting upto 24 hours, complete with timelite 65 amp. 3 pole 230 V analog time switch contactor and MS power coated enclosure of suitable size. The work will be complete in all respect including making necessary connection, earthing nuts and bolts and other petty material to complete the job (Model - Timelite 65 amp 3 pole 230 V analog time switch) |
| 2537 | Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. |
| 2538 | Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Make Philips/ Bajaj BGBOS 9 Watt or Eq. |
| 2539 | Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer in-charge. |
| 2540 | DOMESTIC & FLUSHING PUMP PANEL Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panelMCCB\"s (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Engineer-in-charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only. |
| 2541 | INCOMER:-1 Nos. 63 Amps. 4P MCCB (16 KA)1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-100 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-100 Amps. TP&N aluminium bus bars OUT GOINGS:-7 Nos.25 Amps. TPN MCB (10 KA) |
| 2542 | Supply and erection of Copper strip of suitable size for neutral body earth of transformer and DG set etc. complete in all respect. |
| 2543 | LV SYSTEMSTRUCTURED CABLING SYSTEM PASSIVESupply, Installation, Testing & Commissioning of armoured 6 core Singlemode OS2 (9/125 Micro), Corrugated ECCS Armor, HDPE (UV) Sheathing, Theoxtropic gel filled OFC cable with 2 Nos steel music wire embedded in side sheathing as stregth member for switch connectivity. Cable should be ROHS compliant and as per IEC60749-1 with product warranty of 30 years. Should fulfill the standard Compliance of ITU G.652.D (OS2), IEC 60794-1. Max. Attenuation: At 1310 nm <= 0.35 dB/km, At 1550 nm <=0.22 dB/km. Fibre/Tube Identification : Single Tube. Fibre protection (Tubes) : Polybutylene Terephthalate (PBT). Armouring :ECCS Armoring. Outer Sheath :UVStabilisedHigh Density Polyethylene (HDPE). Central Strength Member: 2 Nos of Steel Music Wire Embedded In Sheath Water Blocking :Water blocking tape. Gel filled: Thixotropic Jelly. Cable Diameter (D) :7.5 ± 0.5 mm. Armor Thickness : 1.5 mm. Mass (Nominal) :65 kg/km. Min. Bending Radius (during Installation) : 20 D;D-Outer Diameter. Max. Tensile Strength-Short Term : 1000N [IEC 60794-1-2-E1]. Max. Crush Resistance-Short Term : 2000N/100 mm [IEC 60794-1-2-E3]. Operating Temperature range : -20°C to +60°C IEC 60794-1-2-F1]. Storage Temperature range : -40°C to +60°C IEC 60794-1-2-F1].Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2544 | Supply, Installation, Testing & Commissioning of 6F SM loaded LIU with LC adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with rubber gurment along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1Uetc complete as required. LIU should be in accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-2003 Optical Fiber Connector Part 1: Type LC and should have 30 years of product warranty. Should have Slide type drawer structure, with Screw fit lock design. Compatible with«YD/T 1272.3-2005 Optical Fiber Connector Part 3: Type SC»Compatible with«YD/T 1272.4-2007 Optical Fiber Connector Part 4: Type FC. Operating Temperature : -20°C to +55°C. The adaptor plate should be pre-loaded with LC/SC Type Single mode Duplex Adaptors.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2545 | Supply, Installation, Testing & Commissioning of 24F SM loaded LIU with LC adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with rubber gurment along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1Uetc complete as required. LIU should be in accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-2003 Optical Fiber Connector Part 1: Type LC and should have 30 years of product warranty. Should have Slide type drawer structure, with Screw fit lock design. Compatible with«YD/T 1272.3-2005 Optical Fiber Connector Part 3: Type SC»Compatible with«YD/T 1272.4-2007 Optical Fiber Connector Part 4: Type FC. Operating Temperature : -20°C to +55°C. The adaptor plate should be pre-loaded with LC/SC Type Single mode Duplex Adaptors.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2546 | Supply, Installation, Testing & Commissioning of LC-LC singlemode OS2 (9/125) duplex, LSZH fiber patch cord for LIU to switch connectivity. Patch Cord should have aramid yarn as strenght member with 1000 time mating cycle.Storage Temperature: -40°C to +85°C. Connector Insertion Loss: 0.20dB(Max). Attenuation: 1310/1550 : 0.30/0.20 dB/KMApproved Makes:Derwiser/Panduit/Legrand/ Systmax /D-Link |
| 2547 | Supply, Installation, Testing & Commissioning of CAT 6A UTP LSZH Cable, 23 AWG solid copper conductors in accordance to TIA/EIA 568 C.2 (Category 6a) & ISO/IEC 11801 2nd ed(Class Ea), UL Approved, tested @500 Mhz tested, Flammability IEC 60332-1-2IEC 60754 -1,2 & 3, IEC 60134-2, RoHS Certified and UL & ETL Listed Cable with HDPE insulation of individual conductor and over all Dia of 7.2 mm for Connectivity of Hub room to End Point. Grey Color. Category 6A U/UTP cables shall extend between the work area location and its associated telecommunications closet and consist of 4 pair. ISO/IEC 60332-1-2; IEC 60754-1 & 2; IEC 61034-2. Conductor Diameter: 0.57+/- 0.03mm (23 AWG Solid Conductor) Insulator HD Polyethylene solidDiameter (1.08 ± 0.05mm)Jacket:LSZH (IEC 60332-1-2) Outer Diameter: 7.2± 0.2mm Max Temperature: -20°C to +80°C Mechanical TestBreaking strength400N. Bend Radius: Installation: <8 X Cable Diameter, Electrical Test D.C. resistance conductor :<9.38O /100m Resistance Unbalance5% Max Mutual Capacitance :< 5.6nF/100m Capacitance Unbalance :< 330/100m at 1Khz Dielectric Strength:DC 1500V/Min. Operating Temperature: -20°C to +80°CPropagation Delay Skew 1–500 MHz: Max. 45 ns/100 m Should be ETL Certified.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2548 | Supply, Installation, Testing & Commissioning of CAT6AUTP Universal (both tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimu 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice, & Wi-Fiat user end.the establishing of transmission channels of class EA with up to 4 plugged connections, complies with Category 6A requirements of the standards ISO/IEC 11801:2.1 edition, IEC 60603-7-4 2nd Edition, EN 50173-1, ANSI/TIA/EIA 568-C.2,ANSI/TIA/EIA 568-D.2 backwards compatible with Cat6, Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an more than or equal to 500 MHz.Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- andUniversaltool& Toolless based connection of installation cables AWG 23 – 26. YDT926.3-2009 IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, Tin phosphor bronze contacts for complying IEC 60603-7 Housing material: High impact flame retardant plastic (UL-94-V0) Jack Contacts: Phosphor bronze, 50 micro-inch gold over nickel plating of 40µ ~ 80µ Plug Retention Force: 30 lbs minimumDielectric Withstand Volt: DC1000V/AC750V 1min Contact Resistance: <= 20 mO Current Rating: 1.5A at 68°FPlug insertion Life: >=750 times plug in Temperature Test: -10°C to 68°C Material: RoHS complied Should be UL & ETL CertifiedApproved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2549 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable. Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL & ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray; It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm :482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHS& UL 94V-0 complied.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/D-Link |
| 2550 | Supply, Installation, Testing & Commissioning of loaded 8 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable.the establishing of transmission channels of class EA with up to 4 plugged connections, complies with Category 6A requirements of the standards ISO/IEC 11801:2.1 edition, IEC 60603-7-4 2nd Edition, EN 50173-1, ANSI/TIA/EIA 568-C.2,ANSI/TIA/EIA 568-D.2 backwards compatible with Cat6, Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an more than or equal to 500 MHz.Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- andUniversaltool& Toolless based connection of installation cables AWG 23 – 26. YDT926.3-2009 IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, Tin phosphor bronze contacts for complying IEC 60603-7 Housing material: High impact flame retardant plastic (UL-94-V0) Jack Contacts: Phosphor bronze, 50 micro-inch gold over nickel plating of 40µ ~ 80µ Plug Retention Force: 30 lbs minimumDielectric Withstand Volt: DC1000V/AC750V 1min Contact Resistance: <= 20 mO Current Rating: 1.5A at 68°FPlug insertion Life: >=750 times plug in Temperature Test: -10°C to 68°C Material: RoHS complied Should be UL & ETL Certified.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/D-Link |
| 2551 | Supply, Installation, Testing & Commissioning of CAT6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Number of conductors : 8. Stranding: 7 x 0.16 mm (26 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.1±0.3 mm Tube / Wire type: stranded conductor Insulation: foam skin, polyolefin, 0.98±0.02mm OD.Plug: Feature cable retention, with enhanced pull strength. Cat 6A patch cord plug to have round cable holder and strain relief boot to avoid bending. plug should have high repeatability cross talk performance Plug design should be patented with unique feature Should be ETL certified.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2552 | Supply, Installation, Testing & Commissioning of CAT6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Number of conductors : 8. Stranding: 7 x 0.16 mm (26 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.1±0.3 mm Tube / Wire type: stranded conductor Insulation: foam skin, polyolefin, 0.98±0.02mm OD.Plug: Feature cable retention, with enhanced pull strength. Cat 6A patch cord plug to have round cable holder and strain relief boot to avoid bending. plug should have high repeatability cross talk performance Plug design should be patented with unique feature Should be ETL certified.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2553 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7white for I/O fixing at user side. Shutter Face Plate with elegant 2 Piece, hidden screw design ABS-UL94-V2, 86x86x12.8 (mm). Should support Operating Temperature: -10~+60; Storage Temperature: -40~+68; Humidity: 10%~90% RH. Material: ABS, UL 94V-0; Spring; Surface Finish: Polished.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2554 | Supply, Installation, Testing & Commissioning of 42 U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.Approved Makes: Derwiser/MTS/Rittal/APC/APW/ D-Link |
| 2555 | Supply, Installation, Testing & Commissioning of 36 U floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.Approved Makes: Derwiser/MTS/Rittal/APC/APW/ D-Link |
| 2556 | Supply, Installation, Testing & Commissioning of 15Uwall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Approved Makes: Der Wiser/MTS/Rittal/APC/APW/ D-Link |
| 2557 | Supply, Installation, Testing & Commissioning of 6 Uwall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Approved Makes: Der Wiser/MTS/Rittal/APC/APW/ D-Link |
| 2558 | Supply, Installation, Testing & CommissioningofWeather Proof Outdoor Enclosure suitable for LIU ,PDU & Switches. Approved Makes: Derwiser/MTS/Rittal/Nexxus/APW/ D-Link |
| 2559 | IP-PBX SYSTEM |
| 2560 | Supply, Installation, Testing & CommissioningofPure IP at core server Based voice solution with08 Port Voicemail ,08 Port FXS ,08 Port FXO , 2 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 383. IP users License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode. The IP telephony system must be based on a pure IP technology that is a software-only solution. The IP telephony system must support unified communication (UC) server & gateways architecture for SIP, Digital and Analog trunks connectivity. The System must be TEC Approved with GR Number. The system must be capable of supporting Analog, Digital, IP Telephones, and SIP based video desk phones. The communication servers must work in an Active/Active redundancy mode. It should be possible to define servers load balancing mode. All servers must be provided in a cluster mode. If one cluster server fails, one of the other cluster servers in the network must be able to take the complete load of the calls automatically (without any manual intervention) and without dropping any existing calls (IP,TDM& PRI) or data (CDR, CTI). Management of all servers in cluster should be from same web page. All servers should have same database. The telephony system must be able to registerSIP phones/SIP video phones and MGCP phones directly to it System shouldhave Distributed Architecture It should be possible to install Telephony system in VMware EXSi 5.5 or higher |
| 2561 | All Data (Numbers, COS, Routing, Applications)should reside in all the Servers Database replication in All servers should be automatic and real time Should support N+1 Redundancy Architecture as well as 1+1 redundancy Architecture Should support Remote Survival Nodes In case of failure of one server, the SIP Phones, SIP Gateways, MGCP Phones should register with secondServer automatically System Diagnostics should be done in Server Hot Standby for SIP Phones and Gateways i.e SIP Phones and Gateways should register automatically to next available telephony server.COTS - commercial off-the-shelf Servers should be used for telephony system, Telephony system should use Linux Operating System, system should support CSTA phase III Protocol, Full continuation for call signalling and media must be supported, Calls must not be disconnected and control must remain throughout the swap to an alternate server including full call control (transfer, conference actions, continuation of CDR data for the existing call). |
| 2562 | Load Balancing of end pointsmust be possible by the administrator There must be no restriction on the number of endpoints being backed up in case of one server failure. UC platform servers must provide full failover and redundancy System should support the following SIP RFCs: RFC 3261 (SIP: Session Initiation Protocol), RFC 3262 (Reliability of Provisional Responses in Session Initiation Protocol), RFC 3263 (Locating SIP Servers) RFC 3264 (An Offer/Answer Model with Session Description Protocol (SDP)), RFC 3265 (Specific Event Notification), RFC 2327 (SDP- Session Description Protocol), RFC 1889 and 1890 (RTP/RTCP), RFC 3515 (REFER), RFC 2833 (DTMF over IP), Scalability. |
| 2563 | It should be possible to add more sites and users without the need to change the software and existing configuration. The system must be scalable to at least 25,000 endpoints in a single cluster architecture.Each server must support a minimum of 1000 endpointsThe call signalling server must handle traffic at a minimum of 100K BHCC. The system must be modular, scalable and distributableSystem SurvivabilityThe UC platform must consist of one or many servers where each server in the cluster provides complete 100% application functionality. In case of a failed server, all endpoints registered with that server need to register instantly with a different server in the cluster with no interruption to on-going calls. Media Gateways must have survival mechanisms that allow them to maintain 100% of the telephony services for their users in case of failure in the WAN links when the signalling with the call server drops. The life cycle of the entire system being provided must be at least Ten (10) years. |
| 2564 | Specification ofIP Video phone :SIP phone should be from the same OEM of IP telephony system 7 inch (124 x 600) adjustable touch screen720p30 HD Video Runs Android 5.1.1 Built in Bluetooth 4.0 + EDR for headsets and pairing mobile devicesDual Port Gigabit Ethernet with PoE Built in WiFi(802.11b/g/n) Call recording, hotline, one touch dialRedial, call waiting, emergency call Data import/export via Bluetooth Ring tone selection/import/deleteLocal phonebook up to 1000 entries XML/LDAP remote phonebook Intelligent search methodPhonebook search/import/export Black list HD voice, HD Handset, HD Speaker Audio Codec: Opus, G.722, G.722.1, G.722.1C, G.711, G.723, G.726, G.729AB, iLBC Video Coded: H.264 High Profile, H.264, VP8Self View (local video preview) 27 one-touch DSS keys Illuminated mute/headset/handsfreespeakerphone key SIP v1 (RFC2543), v2 (RFC3261) Call server redundancy supported IPv4/IPv6 NAT transverse: STUN mode Proxy mode and peer-to-peer SIP link mode Time and date synchronization using SNTP UDP/TCP/DNS-SRV(RFC 3263) QoS: 802.1p/Q tagging (VLAN), Layer 3 ToS, DSCP SRTP for voice encryption Transport Layer Security (TLS) HTTPS certificate manager AES encryption for configuration file Digest authentication using MD5/MD5-sess OpenVPN, IEEE802.1X Auto provision via FTP/TFTP/HTTP/HTTPS for mass deployAuto-provision with PnP, Zero-sp-touch, TR-069, SNMP Package tracing export, system log Setup assistant wizard. |
| 2565 | Help desk specification1.1 General capabilities1.1.1 The proposedsolution must be embedded within the platform, not installed on a separate server and should be from the same OEM of the telephony system.1.1.2 The system must be an All in one solution that provides a one server solution for UC&C and 5 agent license for help desk.1.1.3 Single server deployment with intuitive and central management capabilities should support true multimedia.1.1.4 Help desk managers must be able to easily prioritize customers and incoming contacts regardless of the media used. 1.1.5 The same set of business and routing rules can be applied to voice / chat calls, emails, and faxes if required.1.1.6 The help desk must support multi-layer routing including Priority, Skill Based, Statistical, Business Rules, and Customer Defined Values.1.1.7 Help desk must have embedded IVR, enabling managers to design routing plans and accurately assess help desk activity trends.1.1.8 The IVR application must be a GUI application that can be managed by the customer. |
| 2566 | 1.1.9 The customer must have the ability to build new self-services applications like new IVR flow for new service.1.1.10 Customer must have the ability to define/change routing rules by himself based on customer\"s profile.1.1.11 The help desk must support Outbound, Call-back and Campaigns – including preview, progressive and automated outbound dialling.1.1.12 The supervisor must be able to see the status of help desk agents in real-time in his PClike logout, busy, free, release, non ACD etc. in graphical form in pie chart / bar chart.1.2 Help deskfacilities1.2.1 Real-time Monitoring – must provide supervisors with statistical information about the current status of the help deskwith on line refresh (1sec). The application must include pre-defined list of reports and the customer (end user) should be able to choose reports as needed.1.2.2 The Real Time application must provide the ability to build/change the workspace for each user and by user (not vendor or distributor).1.2.3 The RT must provide the ability to move agents to/from different groups/queues for current login only. |
| 2567 | 1.2.4 Historical Reports – must be able to collect all information from call entry to call termination. Call profile details for internal investigation purposes should be part of the contact center solution. 1.2.5 The help desk solutionmust have an embedded Management Information System (MIS) suite that monitors all help deskactivities, generating reports that summarize the past performance of the system over a given time period, and providing statistical analysis of the help deskwithin a specified period. Real-time and historical reports provide: Help desk agent should be able to do following activities from agent application installed on PC:Login/Logout from group Release/Resume Ready Wrap-up Code Release for Break Release for MeetingControl Wrap Up Supervisor Help Agent Board. Night Answer Central Bell / UNA PickupPage QueueRecall Recall / Incomplete DestinationSecond Ring back Tone Speed Dial Public (System) and Private Virtual Numbers Music On Hold Voice Page Silent Monitor Zone Page Barge In Wake up Extension Features Answer Call Waiting by TransferAuto Set RelocateAuto-AnswerAutomatic DisconnectAutomatic Number Identification (ANI) DisplayBrowse Personal DirectoryBusy Lamp FieldCall Forward AllCall HoldCall LogCall Parking and Call PickupCall WaitingCaller ID Control |
| 2568 | Caller-ID ScreeningCaller id based routing for individual extensionCalling Number and NameCamp-on IdleConfigurable DSS ButtonsDirect Dial without Off Hook (Hands Free)Directed Call PickupDisplay Automatic Number Identification (ANI)Display Dialed Number and NameDisplay Dynamic Call Divert InformationDisplay Select Hold DisplayDisplay Time/Date FunctionDo Not Disturb (DND)DSS/BLFElapsed Time DisplayGroup Call PickupHands FreeHands-Free Announce and Reply (Idle State) |
| 2569 | Last Number RedialLogin and LogoutMessage Waiting IndicationMulti Appearance (Call Waiting)Multiple Line AppearanceOn-Hook DialingPlacing Multiple Calls on HoldPrivacy – ANI RestrictionReminder/wake up CallRestrictions – StationSystem Non-Exclusive HoldTransfer with ConsultationTransfer without Consultation (Blind)Voice PageEmergency PreemptionListen to Paging while in a call (Busy Condition)ULA - User Line Appearance (ULA) |
| 2570 | Emergency communicationThe Emergency communication resource should be fromthe same telephony server and have the facility to automatic dial out to connect up to 100 participants in a single conference. System should also have 100 party managed meet me conference. It should be possible to further divide 100 party conference bridgeinto any combination like 10 X 10 party, 5 x 20 party etc. if required. The meet me conference should be secured means to enter to the conference bridge, the user should enter the password.The emergency communicationmanagement should be from Web Browser/HTML5 based GUI based interface from Windows PC and Touchscreen Devices.The emergency communication must be controlled by a user defined as Group Operator from the web based GUI. The Group Operator should have following features as below: 1.The Group Operator must be able to add / remove members2.The Group Operator must be able to add other conference members3.The Group Operator must be able to mute / unmute (User, None, All)4.The Group Operator must be able to lock / unlock the conference5.The Group Operator must be able to close the conference6. It must be possible to dial out a pre-defined group (or multi-groups) of participants/numbers by simply pressing the pre-assigned virtual key on PC. 7. Each pre-set conference must have its own unique dial number such that when this group number is dialled; all the number stations will ring simultaneously. 8. Any combination of stations and external numbers must be able to be defined as members of the Group Call. |
| 2571 | 9.Participants may join a conference in the audible or in the mute mode, if in mute mode, the right to speak must be selectively offered to attendees per their request by a special signal sent to the Group Operator by the attendees. 10. Attendees must be able to be added or excluded at any time by the Group Operator11. The conference must be terminated when the Group Operator leaves (auto terminate if all members left are muted).12. The Group Operator must be able to barge into an existing user call based on pre-emption predefined rules.13.Group operator must have two SIP phones so that if one phone is busy in conference, the second phone can be used to add participants.14.Both group operator SIP phones should be controlled by web based conference management GUI for telephony feature like answer, hold, transfer etc. 15.The same Group operator should also function as operator consoleAnswerHold RetrieveHang Up |
| 2572 | Specifications for Self Survivable Gateway:Gateway should have minimum 96 analog/CO ports.Gateway should be from the same OEM of IP telephony systemVoice Processing – voice codecs: G.711, G.729A, G.723.1,etc. and echo cancellation: G.168 with 64ms echo tail; dynamic jitter buffer; voice activity detector (VAD)Call Handling – configurable dialing planFax Processing – T.30, T.38 fax relayUser Features – caller ID, call forward, call transfer, hotline, CRBT, do not disturb, speed dialingProtocol – SIP (RFC3261, MGCP etc )Standards – caller ID detection (FSK)Primary and Backup – the gateway can be configured and controlled in server clustersLED indicators– power, system status, network status, line statusEthernet Connector – Dual Gigabit ethernet. The Gateway should function as a Self-Survivable unit when the Ethernet connectivity at gateway end breaks.Power Input – -48 VDC, should have dual DC power supply or dual AC power supplyOperation Humidity – 10% to 90% (non-condensing)Operation Temperature – 0 to 40ºC |
| 2573 | PRIGateway specificationPRI gateway should have Configuration – 1 PRI (30 Channels) or2 PRI (60 Channels) and should be from the same OEM of telephony system.Voice Processing – G.711, G.729A, G.723.1, GSM, iLBC;echo cancellation: G.168 with 64ms echo tail; dynamic jitter buffer; VAD and CNG Calling Control – called/calling party number translation; second stage dialing; voice detection; auto dialing with DTMF; ring back tone generation and detection; voice announcementVoice Proxy – RTP voice proxy function for NAT/firewall traversal Fax Relay – T.30 transparent mode, T.38 fax relayCall Handling – configurable dialing plan, up to 500 routing rulesConfiguration Interface – Web UtilityRemote Management – Telnet, HTTP, TR069PSTN – ISDN PRI standard: ANSI, NI-2, DMS, 5ESSSIP – RFC3261, RFC2976, RFC3515, RFC3581 |
| 2574 | DTMF – tone detection generation and detection; DTMF relay: RFC2833, INFO (SIP)DTMF detection and progress tone detectionPlay ring-back toneT.30 and T.38RTP proxy for NAT traversalEthernet – RJ-45, 10/100 Base-TTrunking Interface – RJ-45System Memory – 128MB or higherSystem Flash – 16MB or higherPower Input – 220V AC or- 48 VDC , should have dual AC/DC power supplyOperation Humidity – 10% to 90% (non-condensing)Operation Temperature – 0 to 40ºC |
| 2575 | Specification of Soft client The soft client should be from the same OEM of IP telephony system. Wifi facility for smart phoneto be provided by the customer.Soft client should be available for Windows PC, Android Phoneand IOS phoneIt should support Windows 7, Windows 8, Windows 10it should be freely downloadable from Google Play / Apple storeit should support following features:Make a callHold Retrievetransfer\"Presences (User Select) -Change status: Available, Busy No Answer, Busy call waiting, DND, Logoff, Forward to VM \"Dial users number - Internal, External, Mobile\"Instant messaging - IM with another soft client User, IM with a Multi Destination, Search on IM sessions, Save IM sessions, IM to groups\"3 way audio conferencecall divertcamp onview missed callContacts synchronized with the PBX directoryApproved Makes: Tadiran/Arista /Polycom/Toshiba/ NEC |
| 2576 | Supply, Installation, Testing & Commissioning of Type 1 IP Phone 1 VoIP account , Full duplex speaker phone, IPV6, 2xLAN, PoE . SIP phone should be from the same OEM of IP telephony system 132 x 64-pixel graphical LCD 1 VoIPccounts XML remote phonebook Auto provision via FTP/TFTP/HTTP/HTTPS for mass deploymentAnonymous call, anonymous call rejection PoE, Headset, Wall-Mountable Volume adjustment, ring tone selection Voicemail, MWI Call park, call pickupDTMF: In-band, out-of-band (RFC 2833) and SIP INFO VAD, CNG, AEC, PLC, AJB, AGC Full-duplex hands-free speakerphone SIP v1 (RFC2543), v2 (RFC3261) NAT Traversal: STUN modeor 3rd party SBC DTMF: In-Band, RFC2833, SIP Info IP Assignment: Static/DHCP/PPPoE 1xRJ9 handset port 1xRJ9 headset portTransport Layer Security (TLS) LED for call and message waiting indication 2xRJ45 10/100M Ethernet ports Power over Ethernet (IEEE 802.3af).Approved Makes: Tadiran/Arista /Polycom/Toshiba/ Aeonix/ NEC |
| 2577 | Supply, Installation, Testing & Commissioning of Type 2 IP Phone with 2 Voip accounts, 2 Lines , HD Voice,Graphic LCD display with backligh.SIP phone should be from the same OEM of IP telephony system 132 x 64 -pixel graphical LCD with backlight2 VoIP accounts Local phonebook up to 100 entries Auto provision via FTP/TFTP/HTTP/HTTPS for mass deployment SRTP/ HTTPS/ TLS, 802.1x PoE, Headset, Wall-Mountable Volume adjustment, ring tone election Voicemail, MWI Call park, call pickup Narrowband codec: G.711, G.723.1, G.726, G.729AB VAD, CNG, AEC, PLC, AJB, AGC Full-duplex hands-free speakerphone SIP v1 (RFC2543), v2 (RFC3261) NAT Traversal: STUN modeor 3rd party SBC DTMF: In-Band, RFC2833, SIP Info IP Assignment: Static/DHCP/PPPoE1xRJ9 handset port 1xRJ9 headset port Transport Layer Security (TLS) LED for call and message waiting indication 2xRJ45 10/100M Ethernet ports Power over Ethernet (IEEE 802.3af) .Approved Makes: Tadiran/Arista /Polycom/Toshiba/ Aeonix/ NEC |
| 2578 | LOCAL AREA NETWORK( LAN ) |
| 2579 | Supply, Installation, Testing & Commissioning of Core Switch should have Min 24 x 10G Based SFP+ port , Min 1 x QSFP+ port, 2x Stacking port comprising 400 Gbps of stacking bandwidth from day 1,Min 2xQSFP28 Port from day1, Support less than 50 Millisecond convergence based of RFC 3619/REP/G.8032 , Min Operating temp 0-50 Degree C ,Must have Common criteriacertification EAL3/NDcPP/NDPP,CE.2 and CB certified.RPS Support . Min 850Gbps switching backplane ,Min 4GB RAM, 32GB Memory, Min 270K Mac address.Auto adustable fan based on temperture variation.Approved Make :Cisco/ Impulse / Juniper / D-Link |
| 2580 | Supply, Installation, Testing & Commissioning of Access switch should have 24 x10/100/1000T port, Min 4x 10 G based SFP+ port, 2x Stacking port comprising 160 Gbps of stacking bandwidth from day 1and should be stackable up to 10 switches. The switch should support redundant internal Hot swappable power supply. The Switch Should have 4K VLAN, 32K MAC Addresses, 5K IPv4 and IPv6 Routing, 2K Multicast Routes for both IPv4 and IPv6.The switch should support 2GB DRAM and 2 GB Flash. The switch should support IPv6,OSPFv3, RIPng , Policy based routing andBFD for any future requirement by adding a license. The device should be NDPP/NDcPP/Common Criteria Certified and should have IPv6 Ready Logo.Approved Make :Cisco/Juniper / Impulse / / D-Link |
| 2581 | Supply, Installation, Testing & Commissioning of12 Port POE+ Access Switches with switching capaticy of128 Gbps, forwarding performance 95 Mpps, having12 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 360W, with 4x 10G SFP+ uplink ports. Should have support for Stacking/VC with stacking bandwidth of maximum 80 Gbps. Should support min 2GB internal DRAM, 2GB internal Flash memory,16K MAC address, Should have static and RIP Routingfrom day 1 and should support OSPF, VRRP,IPv6 features including Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS) , OSPFv3 and static routing as well. (Switch OEM should be leader in Gartner quadrant data centre latest report)Approved Make : Cisco/Juniper / Impulse / / D-Link |
| 2582 | Supply, Installation, Testing and Commissioning of Industrial grade switch 8 x 10/100/1000Base-T Ports POE , 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 240W , 8K MAC address table, Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , Dash board , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 30protection , DIN rail for wall mount , OPerating temperature-40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Certifications : IEC 60068-2-6 ,IEC 60068-2-27 ,IEC 60068-2-32 ,EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 ,EFT, EN61000-4-5 Surge, EN61000-4-6 CS, EN61000-4-8 PFMF ,FCC Part 15 Class A, (EN61000-3-2, EN61000-3-3,EN61000-6-4, EN61000-6-2, EN55022 Approved Make :Cisco/ Juniper / Extreme / / D-Link |
| 2583 | Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base-T Ports POE + 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 120W , 8K MAC address table, Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View, traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 40protection , DIN rail for wall mount , OPerating temperature-40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Approved Make :Cisco/ Juniper / Extreme/ / D-Link |
| 2584 | Supply, Installation, Testing & Commissioning of fiber Modules 1G BASE Approved Make :Cisco/ Impulse / Juniper / Extreme/ D-Link |
| 2585 | Supply, Installation, Testing & Commissioning of fiber Modules 10BASE Approved Make :Cisco/ Juniper / Extreme/ D-Link |
| 2586 | Supply, Installation, Testing & Commissioning of Stacking Cables Approved Make :Cisco/ Juniper / D-Link |
| 2587 | Supply, Installation, Testing & Commissioning of Appliance based customised ITAM for asset inventory management with ability to map physical locations and exact rack elevations for audit and support control. Appliance shall be Intel x86 based device with secure intranet server with Linux Based operating system and relational databases for long term storage. Appliance includes license for 100 units under control.Aprroved Makes:F5/ Palo-alto / Juniper / Extreme/ Nexxus/Arista/ D-Link/ Microfocus |
| 2588 | Wi-Fi SYSTEMS & NGGW |
| 2589 | Supply, Installation, Testing & Commissioning ofthe Microservices based WLAN Architecture. The indoor AP should have radios to support 2.4Ghz and 5 Ghz band in a 4X4:4 Mu-MIMO configuration with support for 802.11 a/b/g/n/ac. The AP should have internal Omni Antennas and should support vBLE and RF optimization. It should also support way findingand asset tracking via bluetooth.Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connevction to the Rogue APs.Plenum rated and support for UL 60950-1 CAN/CSAC22.2 No. 60950-1, FCC Part 15.247, 15.407, 15.107, and 15.109 RSS247 ICES003Approved Make :Cisco/ Juniper / Extreme/ D-Link |
| 2590 | Supply, Installation, Testing & Commissioning ofThe controller should be AI driven on premise or cloud based controller. The controller should be based on Micro Services based Architecture. The solution should support 802.11ac primarily but, should be becakward comaptible to 802.11 a/b/g/n as well and also should have provision to take care of 802.11ax based APs.It should also support way findingand asset tracking via bluetooth.Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connevction to the Rogue APs. The platform should support Guest portal as well and shoul dbe scalable to 220 APs in future. Must be able to provision bulk deployment via templates. Should also have feature to limit the bandwidth based on client, SSID and application. Should have provision to create WxLAN policies or ACLs to create rules as per organizational requirement. Should have provision to extent API to integrate with other systems as well.Approved Make :Cisco/ Juniper / Extreme/ D-Link |
| 2591 | IP CCTV SYSTEMSupply , Installation , Testing and commissioningof CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point.Suitable for 1GBase-T applications in acc. with IEEE 802.3an up to 250 MHz and 55 m.Category 6 Cabling Category 6 UTP cables shall extend between the work area location and its associated telecommunications closet and consist of 4 pair, UTP CMR cable jacket. Conductor: PE Insulated 23AWG Solid Annealed BarebConductor Diameter: 0.555+-0.01mm (23AWG) Insulator High Density Polyethylene, Diameter 0.95 ± 0.05mm) Jacket: LSZH complying toIEC 60754 -1,2 & 3, IEC 60134-2 Outer Diameter: 5.8 ± 0.3 mm Max Temperature: -20°C to +60°C Mechanical Test Breaking strength: 400 N (max.) Maximum installation tension: 110 N (max.) Bend Radius: Installation: <4 X Cable Diameter at –20°C ±1°C,Operation: <8 X Cable Diameter at –20°C ±1°C Electrical Test Conductor Resistance :<9.38O /100mResistance Unbalance5% Max Mutual Capacitance :< 5.6nF/100m Capacitance Unbalance: 330pF/100m. Propagation Velocity :69% Insulation Resistance: Min. 5000 M.Ohm km Characteristic Impedance (1-100 MHz): 100 Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2592 | Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimu 750 mating cycle and 200 insertion cycle and UL approved,for Cameraat user end. ± 15O RoHS Complied & UL, ETL Verified.the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801:2nd edition, EN 50173-1, DIN EN 50173-1: 2002 as well as ANSI/TIA/EIA 568-B.2-1, de-embedded tested in acc. with IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.5e and Cat.5. Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 250 MHz and 55 m. Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- and tool based connection of installation cables AWG 24 – 22 (0.5 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7. IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, gold-plated bronze contacts for >750 mating cycles, >200 insertion cycle Material: RoHS complied Housing material: Polycarbonate (UL-94-V0) Should be available with or without dust protection feature Should be UL Certified.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2593 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6 UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel, Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL & ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray; It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm:482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHS & UL 94V-0 complied.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2594 | Supply, Installation, Testing & Commissioning of loaded 8 port CAT 6 UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL & ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray; It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm:482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHS & UL 94V-0 complied.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2595 | Supply, Installation, Testing & Commissioning of loaded 4 port CAT 6 UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. Pre loaded with cable support Bar, Individual port transparent shutter and labelling point, Preloaded earthing plug for surge protection. UL & ETL Verified. CRC Metal with Black Powder Coated. RoHS Compliant, in accordance to ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards. Safety parameters as per UL 94V-0, Patch panel should be Enhanced with cable strain relief with retention tray; It should have integrated cable support Bar along with the panel Each port of the panel should have individual transparent labelling point Panel should be inbuild transparent spring shutter for dust protection on each port. Material: sub-rack made of Aluminum with dimension 44.4 mm:482.6 mm : 105 mm (h:w:d) tray Information Outlet or connection module should comply with the specification mentioned above Panel should be supplied with earthing wire and earther lug with each panel ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010, YD/T 926.3-2009, ISO/IEC 60603-7 standards Should be RoHS & UL 94V-0 complied.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2596 | Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Number of conductors : 8 Stranding: 7 x 0.20 mm (24 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.5±0.2 mmTube / Wire type: stranded conductor Insulation: solid polyolefin, 0.97±0.02 mm diameter Plug: Feature cable retention, with enhanced pull strength. Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending. Jacket: LSZH complying to IEC 60754 -1,2 & 3, IEC 60134-2 Plug should be featured with color ring options Plug should have high repeatability cross talk performance.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2597 | Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Number of conductors : 8 Stranding: 7 x 0.20 mm (24 AWG) Cable jacket characteristics: cable, metal-free Cable overall diameter: 6.5±0.2 mmTube / Wire type: stranded conductor Insulation: solid polyolefin, 0.97±0.02 mm diameter Plug: Feature cable retention, with enhanced pull strength. Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending. Jacket: LSZH complying to IEC 60754 -1,2 & 3, IEC 60134-2 Plug should be featured with color ring options Plug should have high repeatability cross talk performance.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2598 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7white for I/O fixing at user side.Shutter Face Plate with elegant 2 Piece, hidden screw design ABS-UL94-V2, 86x86x12.8 (mm). Should support Operating Temperature: -10~+60; Storage Temperature: -40~+68; Humidity: 10%~90% RH. Material: ABS, UL 94V-0; Spring; Surface Finish: Polished.Approved Makes:Derwiser/Panduit/Legrand/ Systmax/ D-Link |
| 2599 | Supply, installation, testing and commissioning of 5 MP Domecamera ,ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed :1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+H.264 .SD card supportupto 128GB , Alarm trigger - 1 input / 1 output, frame rate : Main stream should support 25 fps@5MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection(deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE. IR cut filter with auto switch Auto / Schedule / Triggered by Alarm In Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Pedestrian detection, Face detection (deep learning) ,Cross counting Flip,Rotation,Corridor mode, Saturation, Brightness, |
| 2600 | Contrast, Hue, Sharpness adjustable Yes, 120 dB WDR 1 input, 1 output, upto 128 GB,TCP/IP,HTTP, DHCP,DNS,DDNS, RTP /RTSP, PPPoE,SMTP,NTP,UPnP,SNMP,HTTPS, FTP, 1 X BNC, Available, Flash-prevention, dual stream, heartbeat, password protection, privacy mask, IP address filtering Should have the capability to digitally zoomed in web browser by selecting the area using mouse Should have the option of setting the configuration to factory default except network settings. Min 4 Nos of selectable privacy Zones Should support 1 admin and 6 user accounts Firmware upgrade shall be done through web browser Camera IP and firmware should be upgradable through the device search tool/Software without directly logging in to the camera. Firmware should also be upgradable through web browser Should support Defog mode Min IR distance 40 metersIK10 -30°C ~ 60°C Humidity 95% or less (non-condensing) OEM should notbe blacklisted nationally or internationally.Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai |
| 2601 | Supply, installation, testing and commissioning of 5 MP Bulletcamera ,ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream supportH.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed :1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE. Edge analytics Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Pedestrian detection, Face detection (deep learning) ,Cross counting Image setting Flip,Rotation,Corridor mode, Saturation, Brightness, |
| 2602 | Contrast, Hue, Sharpness adjustable Rotate Mode Yes WDR 120 dB WDR Alarm1 input, 1 output, Audio 1 input, 1 output, SD Card support upto 128 GB Protocols TCP/IP,HTTP,DHCP,DNS,DDNS,RTP/RTSP,PPPoE, SMTP,NTP,UPnP, SNMP,HTTPS, FTP, Video output 1 X BNC Reset button Available Security Flash-prevention, dual stream, heartbeat, password protection, privacy mask, IP address filtering Digital Zoom Should have the capability to digitally zoomed in web browser by selecting the area using mouse Factory Default Should have the option of setting the configuration to factory default except network settings. Privacy Zones Min 4 Nos of selectable privacy Zones User accounts Should support 1 admin and 6 user accounts Firmware upgrade Firmware upgrade shall be done through web browser Remote Update Camera IP and firmware should be upgradable through the device search tool/Software without directly logging in to the camera. Firmware should also be upgradable through web browser Defog Should support Defog mode IR Distance Min IR distance 50 meters Operating Temperature -30°C ~ 60°C Humidity 95% or less (non-condensing).Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai |
| 2603 | Supply, installation, testing and commissioning of 3 MP PTZ Camera , UL,CE,FCC Certified , ONVIF profile s , triple stream or more,4.3 to 129mm focal length , 30 X Optical Zoom , 12 X digital Zoom ,Frame rate : 25 fps @ 3MP ,50 fps @ 2 MP ( main stream ) ,Shutter Speed : 1/3 - 1/10,000 s , inbuilt IR LED for night vision ,triple stream or more, IR distance upto 100 mtr or more ,upto 20privacy masking , 2D / 3D noise reduction ,120 dB WDR , 360 deg endess pan , tilt -15 to 90 deg , auto flip support ,80 presets ,Auto pan ,Edge analytics : Intrusion detection , tamper detection , loitering , abandoned object , SD Card support , Auto white balance, Auto iris, Alarm : 2 IN , 1 Out , IP 66 weather proof , Power : 24V AC/ POE+ / POE. Alarm 4 input , 2 Output Edge Video Content Analytics Camera should have in-built Edge Based Analytics,Abandoned Object, Intrusion Detection,Tampering, Wrong Direction, Loitering Detection, Object Counting, Stopped Vehicle, Object Removal Storage backup on network failure Camera should support network failure detection , Camera should have the capability to start the recording automatically on SD card in case of connectivity between camera and NVR/Storage device goes down Edge Storage Built in SD card slot with support upto 128 GB SD card Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF Text Overlay Date & time, and |
| 2604 | a customer-specific text etc. Security HTTPS , IP Filter , IEEE 802.1X Firmware Upgrade The firware upgrade shall be done though web interface, The firmware shall be available free of cost Privacy Mask upto 20 privacy zones PTZ Pelco D, Pelco P, DSCP Protocol Support PAN360 ° endless , Manual speed 0.1° ~ 300°/s , preset speed 9° ~ 350°/s Tilt ,-20° ~ 200° , Manual speed 0.1° ~ 200°/s , Preser speed 7° ~ 300°/s , Auto flip Presets 256 PTZ Operation 8 sequence ,8 cruise , Auto pan Speed by zoom Pan and tilt speed proportional to zoom ratio Home Function Preset , Sequence ,Auto pan , Cruise Calibration Auto( On/Off) Resume after power loss Supported zero downtime power switching Alarm response Preset , Sequence,Auto Pan , Cruise BNC 1 X BNC Ethernet Interface 1 X RJ 45 Certifications UL ,CE,FCC Compatibility ONVIF profile S , G and Q Supported Web browser Internet Explore (10.0+) / Firefox / SafariWeather Proof IP 66Operating Temperature ,-40°C ~ 50°C Power Supply 802.3at (PoE+) 4-Pair 60W / AC 24V ± 20% Power Consumption 45W or less (with IR & Heater on).Approved Makes :Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai |
| 2605 | Supply, installation, testing and commissioning of64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA, Alarm in/out :16chin / 4chout , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support, each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USBfor backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR .Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000,A.I maximum captured quantity200,000.. UL,CE,FCC certified.Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis/ Hyundai |
| 2606 | Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk.Approved Makes: WD /segate /Toshiba/HP |
| 2607 | Supply, Installation, Testing and Commissioning of Rack Mounted Industrial 24 port L2+ Managed switch having 24*10/100/1000Base-T POE ports,4*100/1000Base-X uplink SFP ports ,1*RS232 Console port. Forwarding Rate @ 64 byte 38.69Mpps .Operation TEMP / Humidity -40~+85°C. Security Port Security (MAC-based) , IP Source Guard ,Storm Control ,RADIUS Authentication 802.1x , TACACS+ Authentication ,HTTPs and SSL (Secured Web) ,BPDU Guard ,STP Root Guard ,DHCP Snooping,Loop Protection DHCP Client , Relay , Option 66 , Option 67 , Option 82Event/Error Log Syslog , SMTP (RFC821) Management Access Filtering SNMP , Web , Telnet , SSH PoE Management Scheduling ,Auto-Checking ,Power DelaySNMP (v1, v2c, v3) , RMON ( 1,2,3 & 9 Groups) , Software UpgradeConfiguration Export/Import , Port Mirroring ,LLDP (IEEE802.1AB)LLDP-MED (IEEE802.1AB) CDP Aware ,sFlow ,IPv6 Management , NTP Device Management Topology View , Floor View ,Map View .dashboard ,Traffic Monitoring , Cable Diagnostics Operating Temperature 0°C to 40°C Operating Humidity 10 to 90% RH Storage Temperature-20 to 70°C Storage Humidity 10 to 90% RH AC Input 100V-240V Certifications EN61000-4-5 (for RJ45 Port, Surge 6KV) ,CE/FCC Class A.Approved Make :Cisco/ Impulse / Juniper / Nexxus/ D-Link |
| 2608 | Supply, Installation, Testing and Commissioning of Industrial grade switch 8 x 10/100/1000Base-T Ports POE , 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 240W , 8K MAC address table, Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , Dash board , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 30protection , DIN rail for wall mount , OPerating temperature-40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Certifications : IEC 60068-2-6 ,IEC 60068-2-27 ,IEC 60068-2-32 ,EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 ,EFT, EN61000-4-5 Surge, EN61000-4-6 CS, EN61000-4-8 PFMF ,FCC Part 15 Class A, (EN61000-3-2, EN61000-3-3,EN61000-6-4, EN61000-6-2, EN55022 . Approved Make :Cisco/ Impulse / Juniper / Nexxus /D-Link |
| 2609 | Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base-T Ports POE + 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 120W , 8K MAC address table, Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View, traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 40protection , DIN rail for wall mount , OPerating temperature-40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Approved Make :Cisco/ Impulse / Juniper / Nexxus/ D-Link |
| 2610 | Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO |
| 2611 | FIRE DETECTION SYSTEM |
| 2612 | Supply, Installation, Testing & Commissioningof Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. UL268, 7th Edition & FM Approved. DSR 17.2.4.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell |
| 2613 | Below False Ceiling |
| 2614 | Above False Ceiling |
| 2615 | Supply, installing, testing and commissioning of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches UL268, 7th Edition & FM Approved.DSR 17.2.9.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell |
| 2616 | Supply, installing, testing and commissioning of Addressable Duct Smoke Detector. The duct detector shall have an air velocity rating from 100 to 4000 ft/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches UL268, 7th Edition & FM Approved.DSR 17.2.13.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell |
| 2617 | Supply , Installation , Testing and Commissioning ofBeam Detector with suitable Moniter Module. The beam detector shall be used for High Ceiling application with a detection range upto 100 mtrs having 4 manual & 2 auto sensitivity settings. The beam detector shall be True addressable installed on the SLC circuite & communicate directly with the panel without any interface module UL & FM Approved.DSR 17.2.12.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell |
| 2618 | Supply , Installation , Testing and Commissioning ofRemote Indicator ( RI) High visibility LED, Wide viewing angle for increased visibility, Discreet design for incorporation in to any décor. RI should be of same make as detectors & devices. DSR 17.2.5.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohmi / Gamewell / Honeywell |
| 2619 | MANUAL CALL POINT |
| 2620 | Supply , Installation , Testing and Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. DSR 17.2.14.Approved Makes :Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2621 | MONITOR MODULES |
| 2622 | Supply, Installation, Testing & Commissioning of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2623 | CONTROL MODULESSupply, Installation, Testing & Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. DSR 17.2.11. Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2624 | Supply, Installation, Testing & Commissioning of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. DSR 17.2.7. |
| 2625 | Supply, installing, testing and commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Approved Makes ; Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2626 | Hooter cum strobe Supply , Installation , Testing and Commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed. DSR 17.2.6.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2627 | FIRE ALARM CONTROL PANEL |
| 2628 | Supply , Installation , Testing and Commissioning of Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition DSR 17.2.1.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2629 | 10 Loop Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2630 | 05 LoopApproved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2631 | 03 Loop Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2632 | 01 Loop Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2633 | REPEATER PANEL |
| 2634 | Supply , Installation , Testing and Commissioning of Network Repeater Panel with minimum 10\" Color Touch Screen display with QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. DSR 17.2.3.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2635 | SITc of Graphics User Interface for Monitoring & Control of complete Fire, Voice Evacuation & Telephone Talkback System. The GUI based main network software shall network with other panels on True Peer-to-Peer network. It shall be capable of graphically representing each facility being monitored with floor plans and icons depicting the actual locations of the various systems, and / or sensors’ locations. It shall have the facility to change the sensitivity of any detector. The software shall be capable of monitoring 200 Nodes with 100 Mbps Transmission rate on Fibre Optics Network and 12 Mbps Transmission on cable and 2,50,000 network points. The software shall be capable to Monitor & Control all the Digital Voice Evactuation as well as 2 way communication from main control room using voice signals over Fire Network along with the Fire detection signal. The Graphic workstation shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of GUI.Approved Makes :Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2636 | Supply , Installation , Testing and Commissioning ofAddressable Fire Fighter\"s Telephone Jack with suitable supervised module for two way communication between Remote Fire Fighter & Fire Command Center. UL Listed. DSR 17.2.19.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2637 | Supply , Installation , Testing and Commissioning of Fire Fighter\"s Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center.Approved Makes : Ansul-Tyco / Morley/ Rux / JCI(IFC) / Nohm / Gamewell |
| 2638 | Supplying and Laying of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.Approved makes : Polycab/ RR Kabel/ Paramount/ Parasheild |
| 2639 | PA SYSTEM |
| 2640 | SPEAKERSSupply, installing, testing and commissioning of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5WApproved Makes : Actis / Honeywell / Bosch |
| 2641 | Ceiling Mounted Speakers |
| 2642 | Supply, installing, testing and commissioning of6W Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W.Approved Makes : Actis / Honeywell / Bosch |
| 2643 | Works Details |
| 2644 | Wall Mounted Speakers |
| 2645 | PA CONTROLLER |
| 2646 | Supply, installing, testing and commissioning of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should havefunctions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions:. 255 Priorities. Time schedule broadcasts. Its own PTT microphone. Capable of amplifier redundancy. 8 trigger inputs/outputsApproved Makes :Actis / Honeywell / Bosch |
| 2647 | DIGITAL AMPLIFIERS |
| 2648 | Supply, installing, testing and commissioning of1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection.Approved Makes :Actis / Honeywell / Bosch |
| 2649 | 500 Watts |
| 2650 | PAGING STATION |
| 2651 | Supply, installing, testing and commissioning ofIP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions:. Built-in monitoring loudspeaker. Detachable goose-neck microphone. LCD touchscreen display. Audio inputApproved Makes :Actis / Honeywell / Bosch |
| 2652 | Supply , Installation , Testing and Commissioning of Graphics User Interface for Monitoring & Control of complete Fire alarm system. Features like Audio and visual alerts, Floor plan system visualisation, 3D idle/overview mode including mouse hover/click interaction, Sweeping animations, Programmable buttons and displays, Remote and multi-user access with defined credentials, Password and pin code protection, Network history view/search, Printable reports, Multi network supervision over TCP/IP. The GUI based main network software shall network with other panels on True Peer-to-Peer network. It shall be capable of graphically representing each facility being monitored with floor plans and icons depicting the actual locations of the various systems, and / or sensors’ locations. The Graphic workstation shall act as an independent node communicating on the peer to peer network.Approved Makes : Ansul-Tyco / Honeywell/ Rux |
| 2653 | Supplying and Laying of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.Approved makes : Polycab/ RR Kabel/ Paramount/ Parasheild |
| 2654 | ACCESS CONTROL SYSTEM: |
| 2655 | Supply, Installation, Testing and Commissiong of the followings : |
| 2656 | Supply ,Installation ,Testing & Commissioning of 4 Door 4 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 100000 card user, 400000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available. Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2657 | Supply ,Installation ,Testing & Commissioning of 2 Door 2 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 100000 card user, 400000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available. Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2658 | Power Supply- Supply, Installation , testing and commissioningof 12 V SMPS DC Power Supply Unit,highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage.Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2659 | Supply & Installation of Cloud Compatible enterprise level Web based Modular Access Management and Time Attendance software with SQL Database and support up to desired number of users. Single GUI Plateform with complete modular software with provision to integrate with different application ie; Access Control, VMS, Alarm Management, etc. Employee Self Service - login module for Employee/HOD/MANAGER where they can view their attendance; they can apply for leave/manual punch/tour entry/outdoor entry though internet with their login ID & password. Same way manager can online approve all application sent by employee. Comprehensive Email and SMS module for to send various SMS & Email on the base of different events in Access Control & Time Attendance system. It should support Multi company, multi location, multi department, multi login with different rights, muti hierarchy of employee, Should support maker & checker facility - the local administrator should able to add the users but he should not able to authenticate/approve the User, Approval right of the added user should be with main Administrator. Dedicated output reports for Payroll integration, Duress Authentications, Email & SMS can be sent on every configured event ie; Leave Application/approval, Manaual Punch Application/Approval,Outdoor Application/Approval, Tour Application/Approval, Condone Application/Approval . Holiday restriction (Reader Wise), Device Configuration – Push/Pull, Dual Authentications, Easy Employee tracking as outdoor Employee Attendance should marked with their GPS Location, Employee can mark Offline attendance (If No Network) through Android Mobile App.Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2660 | Supply ,Installation ,Testing & Commissioningof Mifare smart Card Reader Technical Specs.Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2661 | Read Range -4-9 cms |
| 2662 | Data Read CSN/Sector |
| 2663 | Type Smart Card (Mifare Classic) |
| 2664 | Transmit Frequency 13.56 MHz |
| 2665 | Card (Transponder ) Mifare® Series (ISO14443-A) |
| 2666 | Card Read Time 0.1 Sec |
| 2667 | Output Interface Wiegand Format (32 Bits) |
| 2668 | LED Indicator Bi Color LED |
| 2669 | Power supply 12V DC @ 100mA |
| 2670 | Material Abs Plastic |
| 2671 | Card should be read in1 sec |
| 2672 | A Wiegand output that easily interfaces with most existing Wiegand protocol access control panels. |
| 2673 | Compact and Elegant. Easily installed on walls and doors. |
| 2674 | Supply ,Installation ,Testing & Commissioning of Mifare Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Fast Data Transfer: 106 Kbit/s High Data Integrity: 16 Bit CRC, parity, bit coding, bit counting. 1 Kbyte, organized in 16 sectors with 4 blocks of 16bytes each (one block consists of 16 byte), User definable access conditions for each memory block. Data retention of 10 years. Mutual three pass authentication (ISO/IEC DIS9798-2), Data encryption on RF-Channel with replay attack protection. Individual set of two keys per sector (per application) to support multi-application with key hierarchy. Unique serial number for each device. Transport key protects access to EEPROM on chip delivery. Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2675 | Supply ,Installation ,Testing & Commissioningof Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2676 | Supply ,Installation ,Testing & Commissioningof Electromagnetic Lock 1200 lbs, double leaf, LED Status Display, Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2677 | Supply , Installation , Testing and commissioningof CAT 6 UTP cable 23 AWG solid copper conductors.Approved Makes: Belden / Siemon / Panduit / Leviton/ D-LINK |
| 2678 | Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shieldedCable as per specification (between the every card readers & the access controllers) Approved Makes : Polycab / RRKable / CMI / Paramount |
| 2679 | Supply ,Installation ,Testing & Commissioningof U/L Clamp made of aluminium anodised for EM Lock.Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2680 | Supply , Installation , Testing and commissioningofExit push button as required. Approved Makes :Cardex / Lenel / Impulse / Bosch / Smart i/ RBH |
| 2681 | Supply and Fixing of25 mm dia MS Conduit. Approved Makes : AKG / BEC / MK |
| 2682 | EV CHARGING SYSTEMSITC of 24 KW DC EV Wallbox Charger , 24 KW peak- 22.5 KW contiuous, output voltage 150 - 920 VDC, 60 A, 7\" full color touchscreen display, RFID system ISO/IEC14443A/B, ISO/IEC15693, NFC reader mode, Mifare, Calypso, Network connection GSM / 3G modem 10/100 Base-T Ethernet, Operating temperature -35 °C to +55 °C, IP 54 Protection, 7 meter charge cable, AC Input power connection 3P + N + PE, Input voltage range 400 VAC +/-10 % (50/60 Hz), Max. rated input current 3 x 40 A, EMC Class B CE Certified. |
| 2683 | SITC of 7.4 KW AC EV Wallbox Charger , 7.4 KW contiuous, output voltage 220 V, 32 A max. current, RFID system ISO/IEC14443A/B, ISO/IEC15693, NFC reader mode, Mifare, Calypso, Network connection GSM / 3G modem 10/100 Base-T Ethernet, Operating temperature -35 °C to +55 °C, IP 54 Protection, 7 meter charge cable, AC Input power connection 3P + N + PE, EMC Class B CE Certified. |
| 2684 | SITC of Charger Connect + OCPP 1.6 ( in case of DC Chargers ) per year per chargerpayable from 2nd year |
| 2685 | SITC of License for 1 charger with desktop client, IOS/ Android application with integrated payment gateway, remote fault diagnostics, monitoring. Mobile application will be valid for unlimited users with 1 year subscription |
| 2686 | SOLAR POWER GENERATION SYSTEM |
| 2687 | For Hospital BlockSOLAR PANELS Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength withfollowing components complete as required:-(a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part- 2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.(b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC(c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency |
| 2688 | (d) Data Monitoring System complete with accessories.(e) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.(f) Lightning and surge voltage protection.(g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.( Net metering required to be connected with 33 KV line)Above 100 kWp and up to 500 Kwp |
| 2689 | For Residential Blocks |
| 2690 | SOLAR PANELS Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength withfollowing components complete as required:-(a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part- 2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.(b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC(c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency |
| 2691 | (d) Data Monitoring System complete with accessories.(e) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.(f) Lightning and surge voltage protection.(g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.( Net metering required to be connected with 33 KV line)Above 100 kWp and up to 500 Kwp |
| 2692 | SIGNAGES PART |
| 2693 | Providing and fixing of signages, modular curved frame technology,of various widths and lengths, to form suggested usages,made of aluminium extruded sections , duly anodised ,all signages shall be provided with 0.6-0.8mm polycarbonate protecting film over the prints, of appropriate size,Model : Illusion by SIGNSUTRA or Equivalent. |
| 2694 | CEILLING DRIECTION SIGN BOARD of Size 210x1200 |
| 2695 | DIRECTION ARROWS of Size 210x400 |
| 2696 | ROOM NO DIRECTION PLATE of Size210x400 |
| 2697 | ILLUSION C-80,ROOM NUMBER of Size80X120 |
| 2698 | ILLUSION C-80, NAME PLATE of Size80X300 |
| 2699 | ILLUSION C-80, DESIGNATION PLATE of Size 80X300 |
| 2700 | ILLUSION C-210(BOTH SIDE)WALL PROJECTED LADIES TOILET of Size210X250 |
| 2701 | ILLUSION C-210(BOTH SIDE)WALL PROJECTED GENTS TOILET of Size 210X250 |
| 2702 | ILLUSION C-210(BOTH SIDE)WALL PROJECTED HANDICAP TOILET of Size 210X250 |
| 2703 | ILLUSION C-120,DOOR PLATE LADIES TOILET of Size 120X150 |
| 2704 | ILLUSION C-120, DOOR PLATE GENTS TOILET of Size 120X150 |
| 2705 | ILLUSION C-120, DOOR PLATE HANDICAP TOILET of Size 120X150 |
| 2706 | ILLUSION C-80, ELECTRICAL PANEL of Size 80X400 |
| 2707 | ILLUSION C-40, WORK STATION NAME PLATES of Size 40X250 |
| 2708 | DEPARTMENT NAME PLATE of Size 150X600 |
| 2709 | DRINKING WATER of Size 150X450 |
| 2710 | LIFT NUMBER of Size 150X450 |
| 2711 | STAIR NUMBER PLATE of Size 150X400 |
| 2712 | STAIRCASE(BOTH SIDE)WALL PROJECTED of Size 210X250 |
| 2713 | STAIRS of Size 120X120 |
| 2714 | AUTHORISED PERSONAL ONLY of Size 120X120 |
| 2715 | ILLUSION C-100, CUBILESWC, Bathof Size 100X100 |
| 2716 | ILLUSION ATTACHED TOILET of Size 120X150 |
| 2717 | LOCKER NUMBER PLATEof Size 60X100 |
| 2718 | Providing and fixing Main Directory assembeled with standard alluminium alluminium extruded plates, duly anodized.The plates shall be of size1no. of 1000x120mm as top subject plate and 10nos. 1000x100 mm contents plates. Each of the plates shall be provided with 0.8 mm thick polycarbonate protecting film over the printed text. model: Illusion by SIGNSUTRA or equivalent. MAIN DIRECTORY of size 1000x1120 |
| 2719 | Providing and fixing Floor Directory assembeled with standard alluminium alluminium extruded plates, duly anodized.The plates shall be of size1no. of 600x120mm as top subject plate and 10nos. 600x100 mm contents plates. Each of the plates shall be provided with 0.8 mm thick polycarbonate protecting film over the printed text. model: Illusion by SIGNSUTRA or equivalent.FLOOR DIRECTORY of size 1000x1120 |
| 2720 | Providing and fixing Floor Level assembeled with standard alluminium alluminium extruded plates, duly anodized. Each of the plates shall be provided with 0.8 mm thick polycarbonate protecting film over the printed text. model: Illusion by SIGNSUTRA or equivalent.FLOOR LEVEL of size 300X300 |
| 2721 | Providing and fixing of Photoluminescent, 1mm rigid pvc based sheet containg lumingen 3, as base chemical,with high intensity luminous glow capacity. |
| 2722 | PHOTOLUMINESCENT SIGN , FIRE HOSE of size 250X200 |
| 2723 | PHOTOLUMINESCENT SIGN,EXIT SIGN of size 150X400 |
| 2724 | PHOTOLUMINESCENT SIGN,FIRE ALARM CALL POINT of size 150X200 |
| 2725 | PHOTOLUMINESCENT SIGN,FIRE ALARM CALL POINT of size 500X600 |
| 2726 | PHOTOLUMINESCENT SIGN,EXIT DIRECTION SIGN of size 100X300 |
| 2727 | PHOTOLUMINESCENT SIGN,PULL AND PUSH of 90MM DIA |
| 2728 | Providing and fixing of edge lit ,emergency exit sign with 2 hrs power back up, concealed in false ceiling,of PROLITE AUTOGLO make or equivalent |
| 2729 | LEDSIGN (CONCEALED)with 2hr backup,ceiling hung |
| 2730 | EXIT LIGHT WITH 2 HR BACKUP, box type |
| 2731 | Providing and fixing prohibition signage,made of aluminium composite panel, and all text and pictograms as screen printed and malamine coated, all fixtures in 304 grade SS, all design as per architects approval. |
| 2732 | NO SMOKING of size 200X200 |
| 2733 | NO SPITING of size 200X200 |
| 2734 | KEEP SILENCE/PL SWITCH OFF MOBILE of size 200X200 |
| 2735 | SWITCH OFF COMPUTER of size 200X200 |
| 2736 | Providing and fixing of parking Direction sign postings measuring 1800 mm/1200 mm long, 275 mm high fabricated of 25mmx25mm square MS pipe framing covered with 3mm thick ACP alround which is lined with Retroreflective vinyl to its full surface and further lined with Reflective Vinyl duly designed and cut to signage text. The sign posting isuspended by means of stainless steel suspenders, as per design. |
| 2737 | Parking Direction Signs ceiling hung of size 1800x275 |
| 2738 | Parking Direction Signs ceiling hung of size 1200x275 |
| 2739 | Providing and fixing warning sign measuring 400x400 mmframed with 25mmx25mm MS square pipe covered with3mm thick ACP on front and edges alround which is lined with Retroreflective vinyl (AVERY HIP make),to its full surface and further lined with Reflective Vinyl duly designed and cut to signage text. Signs are in set of three, depicting pictogram of No smoking, No horn, and Make use dust bin. |
| 2740 | Warning Signs on Columns in set of three of size 400x400 |
| 2741 | Providing and fixing Directive Wall signs measuring 400x400 mm of design and specification developed as for WSC as above. |
| 2742 | Directive wall signs of size 400x400 |
| 2743 | Providing and fixing Customised signage made ofStainess steel 304 grade Channel letters with 5mm laser cut acrylic of 1600mm height, 100 mm in depth with acrylic front with LED(tetra or minimax of GE) internally illumination. The letters shall bemounted on MS framing as per approved design . |
| 2744 | Main Gate of size 43500x1600 |
| 2745 | GATE NO of size 2500x450 |
| 2746 | Providing and fixing of exterior signage, to be fixed with the help of MS framework, Signage to be made of MS pipe frame work, cladded with 3mm Aluminium composite panel, duly cut by CNC router, and the letters to be laser cut,10mm casted clear acrylic,inserted in a cut out fitted on 4 mm 040 casted acrylic, the letters front to be 3M day and night electrocut vinyl, The signage shall illuminated with back lit LED, of PHILLIPS/GE make of atleast 5Yrs gurantee, (certificate to be provided, by the makers of LED), complete in all respectsrecomended size 3000x1000 |
| 2747 | Subsidary Entrance Sign |
| 2748 | Providing and fixing of TOTEM , stating name of building on both sides,made of 0.8mm thick aluminium sheet duly painted with Polyurethene paint of approved make and shade, aluminium sheet bented to form a curve , and supported by moulded plastic components to hold the curve , the moulded plastic components to be fixed on aluminium rails with clip on arrangment, a sper the product design of model: POLKA, manufectured by Signsutra or equivalent. The Totem shall be mounted over a rectangular base 300 mm high as per design. |
| 2749 | Building name TOTEM of size 830x2400 |
| 2750 | Providing and fixing Drive way Sign measuring 600 x 800 mm mounted and fixed to GI round powder coated pipe with customised fixtures as developed by SIGNSUTRA. The signs are framed with 25x25 mm MS pipe covered with 3mm thick ACP, Retroreflective vinyl and Reflective Vinyl as for Parking Direction Sign postings |
| 2751 | Drive way Sign of size 600x800 |
| 2752 | Providing and fixing of traffic regulatory signages, made on 3mm aluminium sheet size 500x500, mounted on MS 60x60mm poles, 2400mm high, signage to be made with retroreflective HIP sheet of AVERY make, and text /pictogram on reflective vinyl. MS pipe to be grouted and painted as per the specs provided in the drg. |
| 2753 | Traffic regulatory Signsge of size 500x500 |
| 2754 | Providing and fixing External Signage measuring 4 nos, 1200 mm long, 200 mm high Sign frames made up of 25x 25 mm MS square pipes covered with 3 mm thick ACP, Retroreflective vinyl and Reflective Vinyl as for Parking Direction Sign postings. Framed signs are secured to 2GI round powder coated pipe poles 1600 mm high with customised fixtures as developed by SIGNSUTRA. |
| 2755 | External Signage of size 1250x 1600 |
| 2756 | Providing and fixingBuilding directory TOTEM of size measuring 1500mmx3600mm at main entrance Lobby/ Foyer fabricated with MS rigid sections of allied sizes to approved design |
| 2757 | Building TOTEM |
| 2758 | Site Map |
| 2759 | NS PART (Renovation work of 4 No. Classroom )SITC of 3500 lumens ultra short throw projector, WXGA resolution. Contrast Ratio: 14000:1. Network: Wired LAN: RJ45 x 1 (100Mbps), Analog Input:D-Sub 15Pin: 2 (Blue), Composite: RCA x 1 (Yellow) Digital Input: HDMI: 3 (HDMI1 in common with MHL) Output Terminal: D-Sub 15Pin: 1 (Black) In common with Computer2 Audio Input: Stereo Mini Jack Audio Output: Stereo Mini Jack: 1. Should be complete with mounting arm. Make: Epson/ Barco/ Chrsitie/ Sony/ Panasonic |
| 2760 | SITC of 10\"x4\" Whiteboard with interactive tracker, Interactive area: Minimum 105” Diagonal, Form factor: Surface independent & portable Interactive whiteboard system, Board Surface: Ceramic, Magnetic, Scratch resistant, Anti-glare, Maintenance-free, Compatible with ink marker.Technology: 3D Optical Technology, Calibration: Automatic , Lens: Ultra Short focus (T/R 0.18 or less). Movement detection: IR/Optical tracking , Tracking speed: Upto 195 Mn dots / sec, Simultaneous touch point support: Upto 255 Touch Point for Stylus, Resolution: Sub-pixel up-to 6768 x 4320 pxsq (Native 752x480), Active background subtraction: Required, Storage temperature -10°C to 50°C.Interface: Through 1 x USB 2.0, .Compatibility platform: Windows / Linux. Power consumption: Less than 1 watt. Should support interactivity even on edge-blended projection surface.Interactivity: Stylus Touch .Stylus specification: i.Battery FREE Super-capacitive technologyii.Stylus Recharge time: 180 secondsiii.Stylus weight & design: Weight less than 35gm and Design orientation towardscomfort while writing for a long session.iv.Mouse click using stylus: Left & right click of mouse to be integrated in a single button.Interactive Module Make: Cybernetyx/ Ebeam/ MimioBoard Make: Polyvision/ Whitemark/ Pioneer |
| 2761 | SITC of 6\" of Wall Mount Two Way Speaker: The wall mount speaker shall have: 6\" or better woofer and 1\" Tweeter or more, Should have multiple transformer Tapping option from of 50 watts down to 6watts or better. Should have 60watts RMS output power on low impedance, Impedance: 8 or 16 Ohms, The speaker shall have a Frequency Response ranging from 65Hz to 20kHz for better sound reproductivity, Max SPL: 105dB or more Should have metal griller made of steel or better, Horizontal and vertical dispersion angle: 120x120 degree. Make: Audac / Aimline / TW audio |
| 2762 | SITC of dual channel energy rateed stereo digital power amplifier, Technology : ClassD, Temperature controlled FAN, Switching mode power supply, built in DSP, Protection : DC Short circuit & Over heating & Over load & Signal limiting & Power limiter, Frequency response : 20 Hz - 20 kHz, RMS Power @ 4 ? Stereo : 2 x 240 Watt or more, RMS power @ 8 ? Stereo : 2 x 120 Watt or more etc complete required as per specifications. Make: Audac / Powersoft / Russound |
| 2763 | SITC of digital signal processor with minimum 6no. Or more Mic / line input withphantom power and AEC and 4 or more line output, Should have sampline rate of 48kHz or better, Should be expandable for port expansion. 4x4 or more Dante Input for Digital audio transfer as per need,should support Control with App via iOS and Android devices, or any third-party control system, Shall have Built-in filters, feedback suppression, AGC, bidirectional USB bridge. Make: Xilica / Symmatrix / Sennheise |
| 2764 | SITC of wireless digital Lavalier Microphone with 18 or more channel, RF output80mW or more, Omni-directional pickup pattern, Frequency range : 1880 to 1930MHz, Connectivity : RJ-45, 256-Bit AES Encryption (specifications includes single microphone set of transmitter and receiver) etc and complete as required.Make: Sennheiser/ Revolab/ Earthworks |
| 2765 | SITC of wireless digital microphone charger, charging capacity : 2 or moresimultaneously with lighting indication, Should be from same OEM as of wireless mic etc and complet required as per specifications.Make: Sennheiser/ Revolab/Earthworks |
| 2766 | SITC of Gooseneck mic with 3 pin XLR Connector. Impedance < 100 ?, Transducer principle pre polarised condenser microphone, Frequency response: 50 Hz - 20 kHz, Pick-up pattern: cardioid, Maximum sound pressure level (passive): 130 dB SPL, Power supply: P12 - P48 V. Make: Sennheiser/ Revolab/ Earthworks |
| 2767 | SITC of Smart podium -Material: Wooden with PVC bonding, moving withconvenience soft wheels. Top sliding tray with manual lock, Key board mouse sliding try, side body on bottom power input 32 Amp MCB x 1, 1HDMI output for external display, Speaker Output (RF connector L R) 1 No. monitor: 21.5’’- Ten touchcapacitive, 250 cd/m2, 8-Bit (16.7 million colours).Manually adjustable monitor angle. cooling fans 2 numbers. Built-in RFID lock system for security. 5 port PDU X 2 (6 Amp) gooseneck mic port only, Interface modules HDMI x 1, VGA x 1 USB x 1, audio input x 1, LAN x 2, audio Out L/R x 1, power (6 Amp) x 2. Make: Aulto / AHA/ Specktron |
| 2768 | SITC of Ceiling Microphone tile with 28 or more no. of omni directional microphone, coverage area : 55sq mtr or more, Dante connectivity : dual / redundant, POE enable (qty of microphone will vary as per the mentioned coverage area and built in micorphone), Lighting Indication on all four corner, It should work on open control protocol software and compitable to monitor with a single sofware for all the microphone in the campus. Makes : Sennheiser / Clock Audio / Clearone |
| 2769 | SITC of HDMI to USB 3.0 video converter. Supports up to 4K UHD (18Gbps,4K@50/60Hz 4:4:4, 8-bit) video input and output. simultaneously streaming the audio and video signal at 1080p to a USB connected PC for capture or re-broadcast.Automatically scales 4K sources to 1080p for USB capture. Video timing stabilization feature helps to ensure that the USB capture stream won’t lock up or drop, even if the HDMI input source is intermittent or becomes disconnected. Digital stereo audio from either HDMI (LPCM 2.0) or the 3.5mm analog audio input will be captured with the HDMI video source and is selectable within the configuration software. Inputs 1x HDMI [1x Uncompressed AV and Data] 1x 3.5mm [1x Stereo(L/R)]. Outputs 1x HDMI [1x Uncompressed AV and Data]. 1x USB Type-B [1x Propriety Data]Make Cypress/ Crestron/ Extron |
| 2770 | SITC of 12X optical zoom PTZ camera. 1/2.8\" 2MP CMOS sensor. HDMI: 1080p 60/50 fps ; 720p 60/50 fps, USB: 1080p 30/25 fps. Horizontal Viewing Angle: 72°. Vertical Viewing Angle: 43°. Panning Speed: 100°/Sec, Tilting Speed 100°/Sec. Aperture: F1.6 ~ 2.8. Make: Lumens/ Panasonic/ Sony |
| 2771 | SITC of i5 PC with with 8GB RAM, 1 TB HDD, Keyboard, mouse and UPS. Make: Dell/ Lenovo/ HP |
| 2772 | SITC of 8-Port POE Switch. Make: Netgear/ Cisco/ Extreme |
| 2773 | SITC of HDMI Optic fibre Cable 20mtrs. Make: Manhattan/ Kramer/ Crestron |
| 2774 | SITC of HDMI 2 mtrs. Make: Manhattan/ Kramer/ Crestron |
| 2775 | SITC of 1.5sqmm 2 core cable. Make: Polycab/ Havells/ RR |
| 2776 | SITC of Cat-6 Cable. Make: R&M/ Molex/ Panduit |
| 2777 | SITC of 1.5 sqmm 3 core power cable. Make: Polycab/ Havells/ RR |
| 2778 | SITC of 25mm PVC conduit on surface. Make: Diplast/ Polyplast/ AKG |
| 2779 | SITC of ceiling mount for camera. Make: Custom |
| 2780 | SITC of Mic Cable. Make: Deepcab/ Chetan/ Polycab |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
