Sub: “Annual Rate Contract For 11 Kv Distribution Network At Licensee Area Of Dpt At Kandla.” - 1 Supply & Stringing Of Bare Overhead Line Of Aaac (All Alluminium Alloy Conductor )Of Following Sizes As Per Technical Specification No.1. A. Aaac Of C-Gujarat

Sub: “Annual Rate Contract for 11 KV distribution network at licensee area of DPT at Kandla.” - 1 Supply & stringing of bare overhead line of AAAC (All Alluminium Alloy Conductor )of following sizes as per Technical Specification No.1. a. AAAC of cross section area 55 sq.mm (Rabbit) b. AAAC of cross section area 100 sq.mm (Dog) 2 Supply & Laying of 3 Core HT armoured alluminium conductor XLPE cable of 11KV grade of the following type & size as per IS: 7098 (Part - II)1985 with up to date ammendement & as per Technical Specification No. 2. (A) Supply 3 core x 150 Sq.mm (B) Laying (i) In Hard/Soft Soil (ii) Through HDPE Pipe under rail/road crossing (iii) In GI Class-B Pipe. (iv) In RCC Cable Trench 3 Supply & laying of 4 Core LT armoured alluminium conductor XLPE cable of 1.1KV grade of the following type & size as per IS: 7098 (Part - I)1985 & as per Technical Specification No. 3. (A) Supply 4 core x 120 Sq.mm 4 core x 185 Sq.mm 4 core x 300 Sq.mm (B) Laying (i) In Hard/Soft Soil (ii) Through HDPE Pile under rail / road crossing (iii) In GI Class-B Pipe. (iv) In RCC Cable Trench 4 Providing and fixing of indoor/outdoor end termination kit and Straight through kit to HT/LT XLPE Cables of following sizes with heat shirnk end termination kit as per Technical Specification No. 4. (a) End Termination Kit (i) HT 3 core x 150 Sq.mm (ii) HT 1 core x 95 Sq.mm (iii) LT 4 core x 120 Sq.mm (iv) LT 4 core x 185 Sq.mm (v) LT 4 core x 300 Sq.mm (b) Straight Through Kit (i) HT 3 core x 150 Sq.mm (ii) HT 1 core x 95 Sq.mm (iii) LT 4 core x 95 to 300 Sq.mm 5 Supply & Stringing of HT/LT , XLPE insulated Arial Bunched Cable of size 95 sq.mm as per the Technical Specification No. 5. (a) HT AB Cable of size 3X95 sq.mm+1X80 sq.mm (b) LT AB Cable of size 3X 70 + 1X50 + 1X16mm2 6 Making of Horizontal Boring (16) underneath of Road / Rail Cross crossing with HDPE heavy duty pipe as per Technical Specification No. 6. 7 Supply & Fixing of HT Polymeric Pin Insulator with G.I. Hardware of following rating as per Technical specification No. 7 a 11KV Polymeric Pin insulator b 22 KV Polymeric Pin insulator 8 Supply & Fixingof HT Polymeric Disc Insulator with G.I. Hardware of following rating as per Technical specification No. 8. a 11KV Polymerric Disc insulator b 22KV Polymeric Disc insulator 9 Supply & erection of PSC pole of following size as per Technical Specification No. 9. a. 8 mtr. long PSC pole. 10 Supply & erection of RSJ Girder pole of following size as per Technical specification No. 10. a. 11 mtr. long RSJ pole 100mm x 110mm x 8mm thickness b 9 mtr. long RSJ pole 100mm x 100mm x 8mm for strut 11 Supply & Fixing of Stay set as per Technical specification No.11. 12 Supply & Fixing of Lightening arrester complete with hardware as per Technical specification No.12. 13 Supply & Fixing of 11KV Horn gap fuse unit complete with hardware as per Technical specification No.13. 14 Supply & Fixing of 11KV gang operated air break (GOAB) switch suitable for overhead mains as per Technical specification No.14 15 Supply & Fixing of Cross arm of following size as per Technical specification No.15 a. Pole top bracket made from 75 x 40mm ISMC Channel for one no. HT transmission line b. 1.20mtr. length cross arm made from 75 x 40mm ISMC Channel for two nos. HT transmission lines c. 3.00 mtr. length cross arm made from 75 x 40mm ISMC Channel for double circuit HT transmission lines 16 Providing and fixing guarding for overhead line conductors as per Technical specification No. 16. 17 Supply & erection of following type of structures as per Technical Specification No. 17. a Double Pole Structure b Four Pole Structure 18 Supply. Instatallation, testing & commissioning of Distribution Transformer- 11/0.433 kV, copper winding outdoor type suitable for pole mounting PGVCL approved make of following ratings as per Technical Specification No. 18. a) 63 KVA b) 100 KVA c) 200 KVA 19 Supply & fixing of 3 phase and neutral, 200 Amps. Pole mounted Distribution Panel consisting 200A porclean cutouts and required Alluminium basbars for outgoing LT Connections as per Technical Specification No. 19. 20 Supply, Installtion, testing & commissioning of PGVCL /UGVCL / DGVCL /MGVCL approved make or vendor and NABL Lab. tested 11KV combined C.T.P.T. unit of following ratios as per Technical Specification No. 20. a 50/5 b 150/5 c 250/5 d 300/5 21 Fabrication, supply and fixing of Chain link cage (Fencing) around DP & FP structure including civil work as per Technical Specification No. 21. (a) Around DP Structure (b) Around FP Structure 22 Supply, installation, testing & commissioning of AC 3 Phase LT / CT Multifunction DLMS compliance Energy Meter as per Technical Specification No. 22. 23 Supply, installation, testing & commissioning of AC 3 Phase HT / CT Multifunction DLMS compliance Energy Meter as per Technical Specification No. 23. 24 Muffing to pole & stay as per Technical Specification No. 24. 25 Painting of pole with supply of paint as per Technical Specification No. 25. 26 Providing & Fixing of Chemical Treated Gel Earthing as per Technical Specification No. 26. 27 Providing & connecting following type of earth strip/wire for earth station to equipment as per requirement and as per Technical Specification No. 27. (a) 8 SWG GI earthing wire (b) 50X6 mm Hot Dip GI Strip. 28 Hiring of follwing per shift of 8 Hrs basis as per Technical Specification No. 28. (a) Hydra (b) Tractor with trolly

Refer document

Refer document

Refer document