|
| 1 | Providing and applying 1 mm thick white cement based putty …….do……..do……..E/I. |
| 2 | Providing two coat of plastic emuling paint over a coat of primer ………..do……do…….E.I |
| 3 | Extra of old surface ……..do……do……….E/I. |
| 4 | Providing two cost of penting with ready mixed paint of approved shade and make over steel surface includign cleaning the surface thoroughly, scaffolding and taxed all complete as per building aspecification and draction of E/I. |
| 5 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement morter (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and rolity all complete as per building aspesification and draction and of E/I. |
| 6 | Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt ……….do……….do……..E/I. |
| 7 | Providing and laying ceramic glazed floor file ……..do………do…………E/I. |
| 8 | S/F/F 35 mm thick single lead deccrotive flush door ……….do………..do………E/I. |
| 9 | S/F/F 35 mm thick single lead deccrotive flush door ……….do………..do………E/I. |
| 10 | Dismentelling of flooring ……do………do…..E/I. |
| 11 | Taking down old door and window shutter ………..do…………do………….E/I. |
| 12 | Finshing wall with primum acrylic smooth weather lead …..do………do……….E/I. |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 14 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Repairing of Door & Window L/S |
| 16 | Wiring for light/point/fan point/Exhaust fan point/call bell point with 1.5 Sq.mm F.R P.V.C insulated copper conductor cable in surface / recessed P.V.C conduit as required. with piano type switch phenolic laminated sheet M.S Box earthing the point P.V.C insulated copper with 1.5 Sq.mm F.R PVC insulated copper conductor single core cable etc. at required. |
| 17 | Wiring for light/power plug wiring with 2x4 sqmm PVC insulated copper conductor single core cable in surface/ recessed pvc conduit alongwith 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 18 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required1.7.1 2X1.5 sq.mm+1X1.5 sq mm earth wire. |
| 19 | 1.7.2 2X2.5 sq.mm+1X2.5 sq mm eargt wire |
| 20 | 1.7.3 2X4 sq. mm +1X4 sq mm earth wire |
| 21 | S/F of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 22 | Supplying and fixing PVC/GIbox of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 23 | Supplying and fixing following modular type switch/socket on the existing switch box/cover including connections etc. as required.1.24.15/6 amps, one way switch |
| 24 | 1.24.45/6 amps socket outlet |
| 25 | 1.24.315/16 amps one way switch |
| 26 | 1.24.5 15/16 amps, 6 pinsocket outlet |
| 27 | Supplying and fixing of following way single pole & neutral, sheet steel, MCB distribution board 240 volts, on surface/ recess, complete with tinned copper bushbars, neutral link, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as required. (but without MCB/RCCB/ISOLATOR) |
| 28 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, ‘B’ series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required2.11.1Single pole |
| 29 | 2.11.2Single pole and neutral |
| 30 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 31 | LED STREET LIGHT(25W) |
| 32 | 15/16W LED round down light |
| 33 | 15/16 LED BULB |
| 34 | Providing and fixing water closet squatting pan (indian type W.C. pan) with 100mm sand cast iron por S trap, 12.5 liter low level white P.V.C. flusing cistern with manually contrilled devuce (handle lever) conforming to IS : 7231, with all fitting and fixtures complete including cutting and making good the walls and floors wherever required, white vitreous china Orissa pattern W.C. pan of size 580x440 with integral type foot rests |
| 35 | Providing and fixing white vitreous china pedstal type water closet (European type W.C. pan) with seat and lid,12.5 liter low level white P.V.C. flusing cistern with manually contrilled devuce (handle lever) conforming to IS : 7231 with all fitting and fixtures complete including cutting and making good the walls and floors wherever required, W.C. pan with ISI marked solid plastic seat and lid |
| 36 | Providing and fixing wash basin with C.I. brackets 15mm C.P. brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fitting and brackets, cutting and making goods the wall wherever required, white vitreous china flat back wash basin size 550x400mm with single 15mm C.P. brass pillar taps. |
| 37 | C.P brass long body bibcock 15 mm |
| 38 | C.P brass angle valve 15 mm |
| 39 | Providing and fixing PTMT extention nipple for water tank pipe, fitting and approved quality and colour, 15mm nominal bore, weighing not less than 32gms |
| 40 | Providing and fixing unplasticised P.V.C connection pipe with PTMT nuts collar and buss of approved quality and colour, 15mm nominal bore with 30cm length |
| 41 | Cutting holes up to 30X30cm in walls including makinggoods the same with F.P.S. bricks |
| 42 | Providng and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality) complete with 6mm thick hard borad ground fixed to wooden cleats with C.P. brass screws and washers complete 4mm thick glass |
| 43 | 125mm grating withwasis hole |
| 44 | Supplying, fitting and fixing C.P. brass towel rail 20mm X 600mm with bracket container |
| 45 | Providing and fixing Pressure adjustable shower with revolving joint(Basic rate Rs.766.95 +15% for C.P.) |
| 46 | Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc. |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc. 20mm nominal bore |
| 48 | 25mm nominal bore |
| 49 | Constructing brick masonary road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement :4 coarse sand ) including 500x450 mm precast RCC horizontal grating with frame complete as per standard design . |
| 50 | C.P. Brass bib cock (concealed) 15mm |
| 51 | Providing & fixing on wall face unplasticised -Rigid P.V.C.pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 52 | Supplying fitting and fixing Mixture tape |
| 53 | Add 12% GST |
| 54 | Add1% LC |
