Mishra Dhatu Nigam Limited has published Module-I Peb Works Epc For Design Supply Fabrication And Erection For Construction Of Parking Shed Module-Ii Civil Works For Construction Of Parking Shed At Armour Unit Imt Rohtak Haryana State. Submission Date for this Tender is 18-11-2021. Shed Construction Tenders in MIDHANI, HYDERABAD Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Nov-2021 | DUE DATE EXTENSION | Date | 15-11-2021 |
| 2 | 16-Nov-2021 | DUE DATE EXTENSION3 | Date | 18-11-2021 |
| 3 | 16-Nov-2021 | DUE DATE EXTENSION2 | Date | 17-11-2021 |
| Sl. No. | Item Description |
| 1 | Mudule - I: Design, Supply, Fabrication & Erection including preparation of Designs, Drawings (architectural & Structural), shop Drawings, Detailed working Drawings, Bill of quantities for work/ (Technical, general and structural), preparation of final completion drawings, complete responsibility of work, quality, safety of structure, guarantee of structure, detailed further in scope of work enclosed here with for this works. (Excluding Civil works) |
| 2 | Area clearance up to 30 cm depth and disposal of thick Grass , shrubs,weeds,heaps of soil etc and disposal up to lead of 1.0 km. |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm but below 3.0 depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed cost includes back filling. |
| 4 | a) Providing & boring- 300 dia single buld pile-for foundations for depth of 2.0 mtr including the cost of dewatering, bentonite solution for stability of pile bore etc . The cost of RCC M20 grade,TMT steel -will be paid separately, depth will be |
| 5 | b) extra for every one meter |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering-All work up to plinth level : PCC (1:4:8) (40mm nominal size aggregates with 100% Robo sand / Manufacture sand) including curing, leveling, consolidation etc. |
| 7 | Supply of Tibba Sand, spreading, leveling, rolling with 12Ton roller and compaction in layers. |
| 8 | Providing & filling with Granular sub base in layers & below plinth including watering, ramming rolling with 12 T roller to maximum compaction under OMC etc., |
| 9 | Providing and laying M20 concrete (with 50% Robo sand / Manufacture sand and 50% river sand) in position excluding the cost of centering & shuttering for all works up to ground level. The cost includes the cost of mixing, placing, pumping, vibrating, consolidation, compaction, curing, etc. The grade of concrete shall be M20 design mix Ready-mix concrete (RMC)Note: Minimum cement content is 330 kg/Cu.m |
| 10 | Providing & fixing Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. The bars shall cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9mm dia or securing with clips. Thermo-Mechanically treated bars TMT Bars. |
| 11 | Providing & fixing Centering & Shuttering including strutting, propping etc., & removal of form for : sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 12 | Labour charges for fixing PEB M.S bolts & Templatessupplied by MIDHANI, as per the drawing given by PEB supplier the responsibility of civil contractor has to handover the Embeddedbolts to PEB erection party. Use of theodolite, auto levle, dumpy level, piano wires is preferred, high accuracy in job to be maintained in level, alignment. |
| 13 | Providing and grouting with Non-shrink Cementious previous grout material in required size of packing"s (Fosroc Chemical : Conbextra GP2 or equivalent with approval of E.I.C) as per the manufacture specification (50% chips allowance) |
| 14 | Hiring of Labours |
| 15 | a. Skilled |
| 16 | b. Un skilled |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
