Military Engineer Services-MES has published 8264-Repair/Replacement Of Joinery, Plumbing, Sanitary Fittings, Water Tanks And Roof Treatment To Certain Bldgs At Inside And Outside Ota Chennai Under Ge Stm Chennai Repair/Replacement Of Joinery, Plumbing, Sanitary Fittings, Water Tanks And Roof Treatm. Submission Date for this Tender is 20-11-2021. Shed Construction Tenders in St Thomas Mount Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-11-2021 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces all as specified. |
| 2 | All as per srl itemNo.1 hereinbefore but area n exc. 1.5 Sqm each. |
| 3 | Taking down shutters of any description area n exc 1 Sqm each all as specified. |
| 4 | All as per srl itemNo.3 hereinbefore but area exc 1 Sqm and n exc 2 Sqm each . |
| 5 | Supply and Fix Solid PVC Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing. Note:-i) Existing wall edges will have to be finished properly in cement plaster 1:4including fixing of 6 Nos wooden plugs to hold door frame size not exc 17Sqcm average sectional area and 100mm long. (ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side.(iii) PCC strip of section 5x5mm will have to be created at bottom including smooth finish in each door opening. |
| 6 | Supply and Fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 7 | Supply and Fix Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed. |
| 8 | Supply and Fix Factory Made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified. |
| 9 | Supply and Fix Second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified. |
| 10 | Supply and Fix Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats all as specified. |
| 11 | Supply and Fix Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats all as specified. |
| 12 | Supply and Fix Sheet glass 4mm thick ordinary quality and glazing with 12mm square beading in squares n.exc 0.5 Sq.m in each pane all as specified. |
| 13 | Supply and Fix MS work as for hold fasts conforming to Fe 290 Gde-E -165 all as specified. |
| 14 | Material and Labour Preparation of surface of steel and iron such as hold fasts of area n.exc 0.10 Sq.m each new or old of any description and girth not otherwise treated with tar or coal tar black paint all as specified. |
| 15 | Material and Labour Preparing surfaces of wood and wood based materials new or old of chowkats area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each and treated with tar or coal tar black paint all as specified. |
| 16 | Supply and Fix Butt hinges 100mm, cold rolled mild steel, medium weight all as specified. |
| 17 | All as per srl itemNo 16 here-in-before but fixed in repairs |
| 18 | Supply and Fix Butt hinges 100mm,stainless steel hinges fixed with stainless steel screw with frame all as specified. |
| 19 | All as per srl itemNo 18 here-in-before but 75mm size |
| 20 | Supply and Fix in repairs Butt hinges 75mm,stainless steel hinges fixed with stainless steel screw with frame all as specified. |
| 21 | Supply and Fix Aluminium anodised barrel tower bolts of extruded section 200 mm size all as specified. |
| 22 | All as per srl itemNo 21 here-in-before but fixed in repairs |
| 23 | All as per srl itemNo 21 here-in-before but 125mm size. |
| 24 | Supply and Fix in repairs Aluminium anodised barrel tower bolts of extruded section 125 mm size all as specified. |
| 25 | Supply and Fix Extruded aluminium alloy handles, fabricated type, anodised 150mm long all as specified. |
| 26 | All as per srl itemNo 25 here-in-before but fixed in repairs |
| 27 | All as per srl itemNo 25 here-in-before but 125mm size. |
| 28 | Supply and Fix in repairs Extruded aluminium alloy handles, fabricated type, anodised 125mm long all as specified. |
| 29 | Supply and Fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified. |
| 30 | All as per srl itemNo 29 here-in-before but fixed in repairs |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 32 | Supply and Fix Sheet glass 5.5mm thick ordinary quality and glazing with 12mm square beading in squares exc 0.5 Sq.m in each pane all as specified. |
| 33 | Supply and Fix 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete fixed in repairs all as specified. |
| 34 | Supply and Fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 35 | Supply and Fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 36 | Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening with necessary repairs all as specified. |
| 37 | Taking down shutter of any description exc 1 Sqm and n. exc 2 Sqm each and refixing in the same opening with necessary repairs all as specified. |
| 38 | Dismantling boarding any description fixed in any position with nails |
| 39 | Supply and Fix 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified. |
| 40 | Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required. |
| 41 | Supply and Fix 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified. |
| 42 | Supply and Fix Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 43 | Supply and FixAnodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified. |
| 44 | Supply and Fix Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing exc0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting, necessary bearing wheels and switch locking arrangement complete all as specified. |
| 45 | Supply and Fix 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium sections as in partition and doors. |
| 46 | Material and Labour Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified. |
| 47 | Supply and Fix in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg all as specified. |
| 48 | Supply and Fix in repairs mortice lock vertical type size 100 mm brass all as specified. |
| 49 | Dismantlingstructural steel work including doors, gates but excluding framed truss etc. |
| 50 | Supply and Fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E- 165) |
| 51 | Supply and Fix mild steel black plain sheet1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc all as specified. |
| 52 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 53 | Material and Labour plain fillets square rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood sectional area exc 3 and n exc 6 sqm all as specified. |
| 54 | Supply and Fix in repairs gate and shutter, hooks and eyes 125mm, Aluminium plate type - II all as specified. |
| 55 | Supply and Fix Boarding, 20mm thick 2nd class hard wood ,supplied & fixed with nails in any situation (except flooring and skirting) with butt joints as in cup board shelves all as specified. |
| 56 | Supply and Fixing of vertical blinds as in curtains of windows and doors, including aluminium track boxes and necessary fittings all as specified and directed. |
| 57 | Taking down steel tubing and connections 15mm dia tubes. |
| 58 | Taking down steel tubing and connections 20mm dia tubes. |
| 59 | Material and Labour for 15mm dia tubes, "medium" grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified. |
| 60 | Material and Labour 20 mm dia tubes, "medium" grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified. |
| 61 | Supply and Fix in repairs rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical, 3 layered, vertical with closed top) hoisted and fixed in position all as specified. |
| 62 | Supply and Fix in repairs rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical, 3 layered, vertical with closed top) hoisted and fixed in position all as specified. |
| 63 | Supply and Fix Ball valves 25mmhigh pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms) all as specified. |
| 64 | Supply and Fix Ball valves 20mmhigh pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 21 0 gms) all as specified. |
| 65 | Supply and Fix in repairs20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified. |
| 66 | Supply and Fix in repairs25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified. |
| 67 | Supply and Fix in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers all as specified. |
| 68 | Supply and Fix in repairs Vitreous china wash basin, white, flat back, size 550x400 mm incl. brackets all as specified. |
| 69 | Supply and Fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white with plastic water closet seat, white, closed pattern with bottom, and cover and MS CP or aluminium hinging device all as specified. |
| 70 | Supply and Fix in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified. |
| 71 | Supply and Fix Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified. |
| 72 | Supply and Fix in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 litrs, with inlet ball valve, float, handle and flush pipe incl. brackets all as specified. |
| 73 | Supply and Fix in repairs CP shower rose with or without swivel joints 125mm size all as specified. |
| 74 | Supply and Fix in repairs Angle valves,cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15mm bore all as specified. (Make: Seiko / Water man) |
| 75 | Supply and Fix in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15mm bore all as specified. |
| 76 | Supply and fixchromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified. |
| 77 | Supply and Fix in repairsBib taps15mm borecastcopperalloywithcrutch or butter fly handle chromiumplatedscreweddown forironpipeorfor brassferrulefixed all as specified. |
| 78 | Supply and Fix in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device all as specified. |
| 79 | Supply and Fix in repairs Pillar tapsCP cast copper alloy fancy type with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or coldwithlong screwed shanks and fly nuts, screwed for iron pipe 15 mm bore all as specified. |
| 80 | Supply and Fix in repairs PVC connection 15mm size 450mm long with brass nuts on either sides all as specified. |
| 81 | Supply and Fix Bath room PVC cabinet mirror of size 350mm x 450mm(Make : Prayag Cat part No 551 or equivalent) |
| 82 | Supply and Fix 25mm dia stainless steel decorative fancy type curtain rods in repairs including brackets all as directed |
| 83 | Supply and Fix stainless steel decorative fancy type end knob for 25mm curtain rods in repairs all as directed |
| 84 | DismantlingAsbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings. |
| 85 | Supply and Fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 86 | Supply and Fix steel work in trusses, purlins, distance pieces includingspecial shaped washer etc complete using ERW or inductionbutt welded tube confirming toI S 1161- 1979 GRADE S-240 all as specified. |
| 87 | Supply and Fix 4.0mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 Sqm in each pane and fixed to aluminium frames using rubber packingincluding hacking out old broken glassall as specified. |
| 88 | Supply and Fix in repairs 150mm Double action spring hinges for door shutters , mild steel with steel wire spring, stove enamelled, black all as specified. |
| 89 | Material and Labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 25mm thick including 15 mm thick in CM 1:6 all as specified. |
| 90 | Removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as directed. |
| 91 | Material and Labour cementScreed bed 20mm thick in cm 1:4 with using 3% of waterproofing compound by weight of cement all as specified. Note :- Water proofing compound will be measured and paid separately. |
| 92 | Supply only integralwater proofing compound. |
| 93 | Material & labour for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester matt black finished over compatible primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Note : The work shall be carried out by authorised applicators of manufactures only. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
