|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) I.No.21.02 |
| 2 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water , formwork, laying / pumping, compacting , roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. with fine aggregate (Natural sand / Crushed sand V.S.I Grade finely washed etc.) I.No.24.01 |
| 3 | Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layer including watering and compaction complete. I.No.21.37 |
| 4 | Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting complete.I.No.21.38 |
| 5 | Providing and laying in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer . / Concrete Batch mix plant (Pan mixer) etc. complete. with fine agreegate Crushed sand VSI Grade.) |
| 6 | Providing and laying in Situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C Columns as per detailed design and drawing or as directed including centering, formwork, cover blocks , laying / pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minium thickness to give a smooth and even surface or roughening if specifal finish is to be provided and curing etc. complete.(Excluding reinforcement and structrual steel)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine agreegate (crushed sand VSI Grade I.No.25.31 |
| 7 | Providing and laying in Situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C Beam and lintelas per detailed design and drawing or as directed including centering, formwork, cover blocks , laying / pumping compaction androughening the surface if special finish is to be provided and curing etc. complete. .(Excluding reinforcement and structrual steel)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine agreegate (crushed sand VSI Grade I.No.25.50 |
| 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. I.No.26.33 |
| 9 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge. I.no.23.07 |
| 10 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. I.No.23.07 |
| 11 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. I.No.32.11 |
| 12 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.I.No.33.04 |
| 13 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. I.No.35.13 |
| 14 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) |
| 15 | Providing and fixing board displaying information , such as Name of work Tender cost, Name of contractor , work completeion and liability period etc. having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm ) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side on border / messages / symbols etc. with approved colour shade paint complete, on M.S angle of size 35 x 35 x 3 mm frame with properly cross braced M.S angles of size 35 mm x 35 mm x 3 mm duly painted including two M.S angle iron posts of size 65 mm x 65 mm x 6 mm , 3.65 m long painted with alternate block and while bands on 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation, refilling, transportation and labour etc. complete. Spec. No. As directed by Engineer in charge. |
| 16 | Royalty A) Sand |
| 17 | Royalty B) Other |
| 18 | Laboratory Testing Charges |
| 19 | Labour Insurance - Payment should be made as per actual receipt. (For item No. 33 to 57) |
| 20 | GST - Payment should be made as per actual receipt. (For item No. 33 to 57) |
