Rural Engineering Department has published Construction Of Skill Development Centre For Implementation Of Ddu-Gky And Other Skill Development Schemes At Bahraich. Submission Date for this Tender is 29-10-2021. Building Work Tenders in Bahraich Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Work |
2 | E/W in excavation in trenches for found. Pipes cable etc in ordinary soil i/c lift upto 1.5 m. Lead upto 50 m and dressing of of sides and ramming of bottom and disposal of surplus excavated earth as directed by E/I within a lead of 50m. S.I. No. 251 |
3 | Providing and injecting chemical for pre constructional anti-termite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surfase if plinthfilling junction of wall and floor. The rate of application of chemical emulsion 5 liters per sqm. S.I. No. 1 chapter-1.3.9(Plinth Area Rate) |
4 | P/L of cement concrete 1:4:8( 1 cement : 4 fine sand : 8 Brick aggregate 20mm nominal size ) and curing complete i/c cost of formwork in foundation and floors as per S.I.No. 275 |
5 | Sand filling in plinth under floors including watering and ramming including lead upto 50m and lift upto 1.5m etc Ch. 7 Item No. 2.27 Lko PWD SOR 2021. |
6 | Earth work in cutting or embankment in ordinary soil in 20 cm layers including lift upto 1.5m lead upto 30m ramming and dressing the surface to required levels and slopes also i/c 1.0km cartage and royalty complete S.I. No. 253 A |
7 | Class M-150 brick work in 1:6 cement and Fine sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materials, labour and tools and plants etc.required for proper completion of work. As per SOR S.I. No.303 |
8 | P/L of R.C.C. 1:1.5:3 with cement , coarse sand and 2cm gauge stone ballast. Column T beam slab as per SI No. 289 . |
9 | P/L of R.C.C. 1:1.5:3 with cement , coarse sand and 2cm gauge stone ballast.T beam slab as per SI No.(285 + Diff between (289-288). (Lighter Beam) |
10 | P/L of R.C.C. 1:1.5:3 with cement , coarse sand and 2cm gauge stone ballast.T beam slab as per SI No.(286 + Diff between (289-288). (Heavier Beam) |
11 | P/L of R.C.C. 1:1.5:3 with cement , coarse sand and 2cm gauge stone ballast. Slab as per SI No.(284 + Diff between (289-288). (Slab) |
12 | P/L of R.C.C. 1:2:4 with cement , coarse sand and 2cm gauge stone ballast for lintels sunshade . as per SI No. 283 . |
13 | Mild steel or Iron in Plain such as R.C.C. and R.B. Work (when not included in overall rates) wrought to require shape as necessary Including bending for proper complition of work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level as perSOR SI No. 504 |
14 | P/L of C.C. 1:2:4 with cement , coarse sand and 2cm gauge stone grit. as per SI No. 279A require for all complition of work. SOR SI No. 279 (a) |
15 | Class M-150 brick work in super structure above plinth level up to floor two level including necessary cutting and moulding of brick work as required and also including honey combed brick in thickness of wall more than 12 cm. As per SOR S.I. No.303+310 |
16 | Class M-150 brick work in 1:4 cement and C/ sand mortar in ss. As per S.I. No.305,310, 310A |
17 | Mild steel or Iron work of small sizes and section such as fabrication holding down bolts, hold fast , tie rods, grating etc. (when not inluded in an over all rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required for completion of work. (i) Fabrication of holes, Door, chaukhats Nosing . as per S.O.R. SI No. 502 |
18 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR - 9.21.1) |
19 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (DSR- 9.21.1+9.23) |
20 | P/F or panelling and glazing in panelled and glazed shutters for doors, windows and clerestory window (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling or panelled and glazed shutters 25 mm to 40 mm thick. DSR-2018, 9.7.7.2 |
21 | Supply of Aluminium door fiting. |
22 | A - Sliding bolt 16mm dia. 250mm long |
23 | ( Chapter - 11 item 9.62.2 Lko PWD SOR 2021. |
24 | B - Tower bolt 10mm dia. 200mm long |
25 | ( Chapter - 11 item 9.63.2 Lko PWD SOR 2021. |
26 | C - Door Handie 10mm dia. 150mm long |
27 | ( Chapter - 11 item 9.66.2 Lko PWD SOR 2021. |
28 | Supply and Fixing of fan hook. As per SI No.1123 (Electrical SOR) 2018 |
29 | Painting (Two coat) on steel or other metal suface upto 10cm width or grith or small articales over one coat of priming coat i/c supply of all material, labour and T&P etc. over steel surface. SI No. 641+642 |
30 | 12 mm thick plaster with cement & fine sand of 1.25 F.M. mortar in 1:6. S I No. 586 (Interior) |
31 | 12 mm thick plaster with cement & fine sand of 1.25 F.M. mortar in 1:6. S I No. 586 (Exterior) |
32 | 25mm cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of size 12.5mm and below) laid over base concrete and finished with floting coat of neat cement (base concrete to be paid separately) including fixing of glass strip. S.I No.601 |
33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. PWD SOR CH. 13, 2020, 11.41.2 ( 600 x 600 ) |
34 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.PWD SOR CH. 13 2020, 11.37 |
35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. PWD SOR 2020, 8.31, subhead 11 |
36 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. PWD SOR CH. 10,8.2.2.2 |
37 | Providing and Applying white cement based putty average thickness of 1 mm of approved brand over the plasterd wall surface i/c all LKO PWD SOR 13.80 Chapter 15 |
38 | Finishing walls with two coat of acrylicsmooth exterior paint of best quality supply of all material, labour and T&P etc. requ. for proper comp. LKO PWD SOR CH. 15, 13.47.1 |
39 | Supply of Glass strip 22mm wide 2.8 to 3.7mm thick.Chepter No.1 item 7 (a) 2015-16 |
40 | One priming coat & two coat oil distemper on new work i/c supply of all materials, labour and T&P etc. Required for proper completion. SI No. 649+650 |
41 | S/F of 110 mm dia PVC down pipe complete with rose heads bends as S.I. No. 31 |
42 | Supply 0f Aluminiumsheet 26 gauge As per Ch.No.1 item no.45/46 2021 |
43 | Electric Work |
44 | Wiring point for light with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch& ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 131 (C) |
45 | Wiring point for fan /fresh air fan (lightduty exhaust fan) with 1.5 sq mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduteGP Box, piano type switch& ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 133 (C) |
46 | Wiring point for plug with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch and socket etc. Complet in all respect. Add for plug point with modularswitch and socketin place of piano type switch SI No. 134 (C) |
47 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20A/250 volt flush type universal modular socket switch on concealed M.S. Box including supply of all material, labour T&P etc. Require for proper completion of work. SOR SI No. 1139 (A) |
48 | Supply and fixing of power plug with 15 Amp./250 volt flush type switch and 5 pin 15A/250 volt flush type universalsocket switch in suitable M.S. Box of 175 mm x 100 mm x 50 mm size with phenolic laminted bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer .SOR SI No. 1139 |
49 | S/W of submain with two number 2.5 sq mm FRLHS PVC insulted1100 V grade multistrandsingle core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC condute with 1number 1.5 sq mm FRLHS PVC insulted1100 V grade multistrandsingle core copper conductor as earth continuity wire.complete in all respect SI No. 1304 (C) |
50 | S/W of submain with two number 4.0 sq mm FRLHS PVC insulted1100 V grade multistrandsingle core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC condute with one No. 2.5 sq mm FRLHS PVC insulted multistrandsingle core copper conductor cable as earth continuity wire drawn in condut. complete in all respect SI No. 216 (C) |
51 | S/W of submain with two number 6.0 sq mm FRLSH PVC insulted1100 V grade multistrandsingle core copper conductor cable but in 25 mm dia heavy duty (2 mm thick) PVC condute with one No. 4 sq mm FRLHS PVC insulted multistrandsingle core copper conductor cable as earth continuity wire drawn in condut. complete in all respect SI No. 1309 (C) |
52 | S/W of submain with two number 16 sq mm FRLSH PVC insulted1100 V grade multistrandsingle core copper conductor cable but in 32 mm dia heavy duty (2 mm thick) PVC condute with one No. 10 sq mm FRLHS PVC insulted multistrandsingle core copper conductor cable as earth continuity wire drawn in condut. complete in all respect SI No. 219(B) |
53 | Supply and laying of aluminium conductor PVC insulated armoured served cables 1100 Volts grade at a depth of 750 mm below ground lavel over a cushion of 75 mm thick sand all around and protected with burnet bricks on sides and on top. On surface the cable run shall be fixed on M.S. clampes etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core. SOR 501 (m) |
54 | Supply and laying of aluminium conductor PVC insulated armoured served cables 1100 Volts grade at a depth of 750 mm below ground lavel over a cushion of 75 mm thick sand all around and protected with burnet bricks on sides and on top. On surface the cable run shall be fixed on M.S. clampes etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 core. SOR 501 (l) |
55 | S & F surface/flush mounting 8 ways TPN distribution board with additional metal door without MCB complete in all respect, as direct by Engineer in Charge. SOR 1028. (CAT B) |
56 | Supply and Fixing of 100 Amp. 4 pole isolator. SOR 1007 (C) CAT B |
57 | Supply and Fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. For 10 Amp. Light point, 16 Amp. Power point, 32 Amp. A.C. Point. SOR 1002 CAT B |
58 | Supply and buryingof 600mm x600mm x 6mm G.I. Plate vertically for earthing with its top at least 3 metres below ground levels complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board ( from appron to switch board the cost of GI pipe and GI wire will be extra ) 30 cm square CI frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer - in - charge complete in all respects as per drawing (This will apply for earthing of poles also). SOR SI No. 702 |
59 | Supply and Fixing of one number 8 SWG GI wire in 15mm dia GI pipe for earthing, laid in ground or in wal duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. SOR 721 |
60 | Supply and Fixing of LED Tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on Surface complete in all respect. SOR S.I. No. 1413 CAT-AA |
61 | Supply and fixing of electronic fan regulator ( Modular ) 120-280 V. ISI marked, on the existing switch board including making connections, required materials, labour T&P etc. For proper completion of work to the satisfaction of Engineer in charge of work. SOR SI No. 1203 (C) |
62 | Erection and testing of celling fan and regulator etc. Excluding supply of down rod, complete in all respect. SOR S.I. No. 1115 |
63 | Supply and Fixing of the extinguisher, ABC Type 4.00 kg capacity (ISI Marked IS : 15683 & TAC approved ) compete with inittial charges and wall bracket, along with, supply of all materials and labour for proper completion of work. SI 1131 |
64 | Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. UP ELECTRICAL PWD SOR 2018 (1132) |
65 | Sanitary Work |
66 | S/F of 110mm PVC pipe dia 6kg. Presser I.S.I mark SOR Chapter 1 Item No. 45/63 Lko PWD SOR 2021. |
67 | As item 1 above but for 75 mm dia PVC pipe. SOR Chapter 1 Item No. 45/65. Lko PWD SOR 2021. |
68 | Providing and Fixing G.I. Pipes complete with G.I. Fittings including trenching and refilling etc. 20mm dia nominal bore. DSR 18.12.2 |
69 | Providing and Fixing G.I. Pipes complete with G.I. Fittings including trenching and refilling etc. 25mm dia nominal bore. DSR 18.12.3 |
70 | PVC pipe 160mm dia 6 kg. Presser I.S.I. Make.SOR Chapter 1 Item No. 45/62. Lko PWD SOR 2021. |
71 | Fullway Gate Valve 25 mm dia SOR Chapt. 21 Item no. 58 |
72 | BGI Union 25 mm dia SOR Chapt. 21 Item no. 61 |
73 | Brass ball cock complete with ball and brass rod 25 mm dia SOR Chapt. 21 Item no.76 |
74 | Brass stop cock 20 mm dia 400 gm SOR Chapt. 21 Item no. 47 |
75 | White glazed earthen ware (European type) WC Pan 510 mm dia Jaguar,ESSCO, CERA, Hindware. SOR Chapt.22 Item no. 3 |
76 | Wash hand Basin 450x400 mm size of white glazed earthen ware (22"x16") Jaguar,ESSCO, CERA, Hindware. SOR Chapt.22 Item no. 11 |
77 | Squatting size urinal seats for standard size 450x350 mm cera, hindware. SOR Chapt. 22 Item no. 10 |
78 | P.V.C. Waste pipe 32 mm for W.H.B. / Sink. SOR Chapt. 21 Item no. 96 |
79 | C.P. Brass waste jali for Sink, urinal.SOR Chapt. 21 Item no. 95 (a) |
80 | C.P. Jali heavy quality. 100 mm diaSOR Chapt. 21 Item no. 94 |
81 | P.V.C. Conection 450 mm long with two brass unit 15 mm dia.SOR Chapt. 21 Item no. 97 |
82 | P.V.C. Conection 600 mm long with two brass unit 15 mm dia.SOR Chapt. 21 Item no. 98 |
83 | C.P. Bib cock heavy quality short bodySOR Chapt. 21 Item no. 51 |
84 | C.P. Bib cock heavy quality long body SOR Chapt. 21 Item no. 52 |
85 | C.P.Two way Bib cock heavy quality short body with wall flangeSOR Chapt. 21 Item no. 53 |
86 | C.P. pillar cock with brass spindleSOR Chapt. 21 Item no. 86 |
87 | C.P. Angle valve 15 mm dia SOR Chapt. 21 Item no. 87 |
88 | C.P. Concealed stop cock 20 mm diaSOR Chapt. 21 Item no. 90 |
89 | C.P. Brass towel rail 450x20 mm together with pair of C.P. Brass brackets to fit the towel rail. SOR Chapt. 22 Item no. 22 |
90 | C.P. Soap dishSOR Chapt. 22 Item no. 24 |
91 | Looking Mirror with polish of 600x450 mm size with bevelled.SOR Chapt. 22 Item no. 14 |
92 | Hard Board Sheet with clips for mirror 600x450x5 mm.SOR Chapt. 22 Item no. 15 |
93 | PVC water storage Tank Syntax or equivalent .SOR Chapt. 1 Item no. 45/77 |
94 | CP Brass Shower heavy qualitySOR Chapt. 21 Item no. 55 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail