|
| 1 | Dismantling the Stone Masonry in cement mortar including stacking the material with 15 m. lead and all lifts etc .complete as directed. |
| 2 | Providing and fixing anchor bar of 25 mm diameter with resin bond cement capsule anchorage including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations with lead up to 1 Km and all lifts etc complete. Total length of anchor bar inside the drilled hole = 2.275 m (67 % of total length of bar) Total length of anchor bar outside the drilled hole = 1.10 m (33 % of total length of bar) |
| 3 | Providing and fixing deformed cold twist tor steel reinforcement as per design and drawing including cutting, bending, hooking and binding with all lead and lift as directed etc. complete. |
| 4 | Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 5 | Providing and structural steel (ISWB 150 x 100 mm) in rolled section like joint ,angles etc as per detailed design and drawing including fixing in position with hold fasts , including oil paint with two coat including one coat anticorrosive etc complete (For Sill Beam 150 x 100 ) |
| 6 | Providing and fixing in postion M.S.Needle of size 2100 x 500 mm as per detailed design ,drawing & specification completed as directedA) Materilas & fabriction cost as per Mechanical lifting gate B)Rubber seal cost as per Mechanical lifting gateHorizantal plain flat type rubber seal 82 x 20 mm 2.20 m long @1128cladded music note type size 32 dia. x 105 x 15 m ,0.50 m high x 2 sides = 1 m long@4992per m. |
| 7 | Providing watch,ward and lifting opreation of gates during rainy season completed as directed |
| 8 | For Vent of 4.50 m height with footbridge |
| 9 | For Vent of 2.0 m height without footbridge in second tier |
| 10 | Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineerin-Charge. |
