}

Construction Of Biju Patnaik Indoor Stadium ( Mph ) At Aska Nac, Aska, District Ganjam Building Work ( Composite Bid ) , Aska, Ganjam-Odisha

Road And Building Department-RBD has published Construction Of Biju Patnaik Indoor Stadium ( Mph ) At Aska Nac, Aska, District Ganjam Building Work ( Composite Bid ) . Submission Date for this Tender is 05-11-2021. Building Work Tenders in Aska, Ganjam Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

29608284
Corrigendum : Construction Of Biju Patnaik Indoor Stadium ( Mph ) At Aska Nac, Aska, District Ganjam Building Work ( Composite Bid )
Open Tender
Indian
Odisha
Aska, Ganjam
05-11-2021

Tender Details

Construction Of Biju Patnaik Indoor Stadium ( Mph ) At Aska Nac, Aska, District Ganjam Building Work ( Composite Bid )

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 21-Oct-2021 Change in IFB Other 05-11-2021

Key Value

Document Fees
INR 10000 /-
EMD
Refer document
Tender Value
INR 5.10 Crore /-

BOQ Items

Name of Work: Construction of Biju Patnaik Indoor Stadium (MPH) at Aska NAC, Aska, District Ganjam
Sl. No. Item Description
1Civil Work : Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
2Earth Work : Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
3Upto 1.5mtr Depth
4Beyond 1.5mtr to 3.00 mtr Depth
5Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance,loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
6Ground Floor
7Disposal ofsurplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as perthe direction of the Engineer-in-charge.
8Ground Floor
9Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance,loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
10The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
11Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
12Ground Floor
13PCC Work : Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
14(a)Beyond 1.5 M to 4.5M Depth
15(a)Ground Floor
16(b)First Floor
17RCC Work : Providing, lifting, hoisting and layingin position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
18(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
19(a)Ground Floor
20(B)R.C.C. Plinth Beam
21(a)Ground Floor
22(C)R.C.C. Beams, columns, grider and bressmer etc.
23(a)Ground Floor
24(b)First Floor
25(C)SecondFloor
26(D)R.C.C. Floor and Roof slab, landing, balconies, Projecting sun shades and chajjas up to 4.3Mtr. Height.
27(a)Ground Floor
28(b)First Floor
29(C)SecondFloor
30(E)R.C.C. stairs excluding landing but including railing.
31(a)Ground Floor
32(F)R.C.C. Lintel
33(a)Ground Floor
34(b)First Floor
35(C)SecondFloor
36(G)R.C.C. walls and fins including attached pillasters.
37(a)Second Floor
38Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL/JINDAL/SHYAM) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS)with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken& quantity will be calculated on standard weight.Lap length of bars& Weight of binding wire will not be considered for measurement and payment).
39(a)Ground Floor
40(b)First Floor
41(C)SecondFloor
42Brick Work : Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
43(a)Ground Floor
44Providing and laying Brick masonry work in Superstructure usingFly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
45(a)Ground Floor
46(b)First Floor
47(C)Second Floor
48Providing and laying of Full Brick Masonry work in Superstructure usingFly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
49(a)Ground Floor
50(b)First Floor
51(C)Second Floor
52Plinth Protection : Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
53(a)Ground Floor
54Roof Treatment : Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make:BASF/Fosroc/SIKA/MAPEI/MYK) after scrapingand cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance,sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
55(a)First Floor
56TERRACE WATER PROOFING : Providing and installing two component acrylic modified cementitious waterproofing coating over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakagePotlife @ 25°C 2 hours &@ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance,and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (Make:BASF/Fosroc/SIKA/MAPEI/MYK)
57(a)First Floor
58Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, alland royalties, all labour, scaffolding, watering and curing ,sundries, T&P etc. complete as per direction of the Engineer-in-charge
59(a)Ground Floor
60(b)First Floor
61(C)Second Floor
62Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
63(a)Ground Floor
64Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, alland royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
65(a)Ground Floor
66(b)First Floor
67(C)Second Floor
68Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer12mm thick in CM 1:6 (1 cement : 6 coarse sand) andtop layer of 6mm thick cement plaster1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, alland royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
69(a)Ground Floor
70(b)First Floor
71(C)Second Floor
72Providing drip course/ groove in plastered surface or moulding to R.C.C. projections including cost of all materials, conveyance, royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
73(a)In all Floors
74Finishing work : Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, , loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make: Birla White/J K Wall Putty)
75(a)Ground Floor
76(b)First Floor
77(C)Second Floor
78Providing and applying Two Coats Plastic Emulsion Paintof approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance,loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the directionof the Engineer-in-charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
79(a)Ground Floor
80(b)First Floor
81(C)Second Floor
82Providing & Painting two or more coats with Premium Acrylic Smooth Exterior Paint with Silicon Additives of required shade after preparation of surfaces including brushing the suface to make free from foreign materials, sand papering, Priming, etc. including the cost, conveyance,of all materials, cost of all materials, T&P, etc, all complete as per the direction of Engineer-in-Charge.(Note: Colour & shade to be approved before procurment & use) (Make:Dulux/Nerolac/Berger/Asian Paint)
83(a)Ground Floor
84(b)First Floor
85(C)Second Floor
86Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties, , of all materials, cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
87(a)Ground Floor
88(b)First Floor
89Providing and Painting of Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer"s ecifications including appropriate priming coat(Red Oxide Zinc Chromate) , preparation of surface, etc. complete as per Direction of E.I.C. (Make:Dulux/Nerolac/Berger/Asian Paint)
90(a)Second Floor
91Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.
92The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction of engineer in charge all complete.
9366mm Overall thickness Partition with 8mm thick Double Skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/ sq.cm, Bending Strength 100 kg./ sq.cm. (Make:Aerolite/Hilux/Aeroceil)
94Flooring work : Providing and laying of 600 mm x 600 mm Matt Finished Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand)including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)
95(a)Ground Floor
96Providing and laying of 600mm x 600mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, , royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) Mak:Somany/ Jhonson/RAK/ Kajaria)
97(a)Ground Floor
98Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand)including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, , royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)
99(a)Ground Floor
100Providing & laying granite stone flooring using 20 mm thickgranite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thickcement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing,etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown) (Note- Sample of granite tiles shall be approved before procurement and use.)
101(a)Ground Floor
102Providing & laying granite stone flooring in Floors and landing using 20 mm thickgranite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thickcement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance,royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown) (Note- Sample of granite tiles shall be approved before procurement and use.)
103(a)Ground Floor
104Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar(1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown) (Note- Sample of tiles shall be approved before procurement and use.)
105(a)Ground Floor
106Arena Flooring : Supply and Installation of GRADE-2 Maple/Teak Wooden Flooring System (BWF Certified) EN Tested of Hardwood Maple Size: 20mm thick X 57/83 mm Width Tongue & Groove system over 45mmtreated Pinewood Sleeper installed at 9"(23 CM) distance with 19mm thick Rubber Pads sanded ,kiln and dried treated with vapour barrier of 6 mil polythylene laid on VDF Flooring, including cost of all materials, cost of all labour, conveyance, loading, unloading,T&P, etc.Complete as per drawing and the direction of the Engineer-in-charge.(VDF Flooring Paid Separately)
107(a)In all Floors
108Supplying and installation of 4.5mm thick (BWF Certified) PVC/YONEX Mat Flooring EN/DN Tested (EN 14904: Shock Absorption>= 11%, Vertical Deformation or DIN 18032.2:Force Reduction>=11%,StandardDeformation) to be glued /taped on top of the Maple wood flooring including line marking. The cost includes all materials, labour, conveyance, , loading, unloading,T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge. (Mat Colour -Green for Playing area,Blue for Margin/Run-off area)Warranty: 5 Years
109Methodology of Installationof Maple Wood and PVC Mat Flooring: Step – 1: Lay the Polythene Sheet/ Vapour Barrier on top of the Concrete/ RCC - VDF Floor. Step – 2: Nail the Cushion/ Rubber Pads into the Sleepers. Step – 3: 300/350 mm spacing to be maintained between the Wooden Batten/ Sleepers as per Manufacturer"s Specification. or Wooden Batten/ Sleepers to be placed 300/350 mm apart as per Manufacturer"s Specification. Step – 4: Top Solid Wood (Maple/ Teak) to be Nailed to the Wooden Batten/ Sleepers. Step – 5: Grinding & Sanding to be done for Unfinished Top Wood (Preferably Factory Prefinished Top Wood to be used) Note: No Polish to be used on Wood (that will make the wood slippery) Step – 6: PVC/ Yonex Mat to be glued/taped on top of the wood Step – 7: Line Marking to be done or Pre done at the factory on the Mat.
110Note: • Installation of Wooden Sports Flooring with total maximum thickness of 75 mm comprising of Top Solid Wood followed by Pine Wood Runner/ Batten and Rubber/ Cushion Pad. • Total Arena flooring thickness should be of 79/ 79.5/ 80 mm (75 mm Wooden Flooring + 4/4.5/5 mm Yonex mat). • Entire Wooden flooring to be covered with PVC mat. Court/ Line marking will only be done at the Playing Area. • All the product (Wooden + PVC Mat) should be BADMINTON WORLD FEDERATION (BWF) approved. • The product should qualify with the sports properties of applicable EN/ DIN codes.
111(a)In all Floors
112Supply of 7.5 mm thick vinyle sports flooringfor gymnasium Anti-Viral activity (human coronavirus 229E) – ISO 21702….99.37% (after 2h00) Anti-bacterial activity (ISO 22196) >99% inhabits growth,synthetic sports surface it consists of wear layer not less than 2mm thick, with double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return. Surfacetreated withprotecsol, to reduce skin burn and sanosol treatment forfungistatic and bacteriostatic properties.weight not less than 4.6 kg per sqm Sheet width1.5 mts,joined with seamless hot welding. Floorings laid with adhesive as per manufacturer’s instruction over existing leveled surface including game lines marking.
113Technical Specifications Shock absorption under EN 14808 standard not less than 25% Ball bounce under EN 12235 standards not less than 90%Abrasion resistance as per EN ISO 5470-1 shall be < 350 mg. Friction coefficient as per DIN - 180320.4 - 0.6,Sound isolation shall be > 18 dB. Anti-bacterial activity 99% inhhibits growthThe cost includes all materials, labour, conveyance, , loading, unloading,T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge. (Vinyle FLooring Colour ,Code & Line Mark Colour: To be approved byarchitect) (Make:Freewill/TS Sports/Wilson Sports)
114(a)Ground Floors
115Providing & installation of Safelock 25 mm interlocking rubber tiles of sizes 50*50 cm with 4.6 kgs weight for gymnasium floor. Safelock is a mix of natural rubber & recycled rubber with Elephant skin pattern. It will be UV resistant & the thicker layer of rubber matting protects the floor as well as the user. It also dampens sound & absorbs shocks.including cost of all materials, labour, conveyance, sundries, T&P, complete as per direction of Engineer-in-Charge. ( Make : FREEWILL/ EBACO /TARKETT/ ARMSTRONG )
116(a)In all Floors
117Providing and laying 100mm uniform thick "Tremix / VDF flooring with plain cement concrete of M-30 grade (Minimum cement content 406 Kg/cum) in alternate panels of 4M x 3M using with 20mm and down grade black hard granite crusher broken stone chips including the cost of screed board vibrator, placing of filter mat, top mat,Vacum process, power troweling, brooming, T&P charges including power, loading, unloading and hire charges, making grooves of 6mm wide and 25mm deep @ 1.5 M C/C bothways, filling the joints with approved qunlity sealing compound "" Grade A"" including the cost of all materials, cost of labours, conveyance, , royalty, labour ces, etc., complete as per the specifications anddirection of Engineer -in-charge.
118(a)Ground Floor
119Built in Jointeries : Providing and fixing 35 mm thick Single Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush door inclusive of SS Matt Finish 304 Grade 4 No’s Butt Hinges (125mm x67mm x2.5mm), 1 No door closer (40 - 80Kg), 1 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (250mm x 16mm),1 noDoor Stopper , 1 No tower Bolt (300mm x10 mm), and 1 No PVC Buffer with SS Screw etc, including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge. (Make: Flush Door: Greenply/Century/Merino, Laminate: Greenply/Century/Merino Hardware Fittings: Godrej/Dorset/Link/Dorma & Colour: Coffee Brown)
120(a)Ground Floor
121(b)First Floor
122Providing and fixing 35 mm thick Double Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters , teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush doorinclussive of SS 304 Grade 8 No’s Butt Hinges (125mm x 67mm x 2.5mm), 2 No door closer (40 - 80Kg), 2 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (300mm x 16mm),2 nosDoor Stopper , 2 No tower Bolt (300mm x10 mm), and 2 No PVC Buffer with SS Screw etc including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge. (Make: Flush Door: Greenply/Century/Merino, Laminate: Greenply/Century/Merino Hardware Fittings: Godrej/Dorset/Link/Dorma & Colour: Coffee Brown)
123(a)Ground Floor
124Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood,Colour:Coffee Brown)
125Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
126(a)Ground Floor
127(a)Ground Floor
128Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma, Colour:Coffee Brown)
129(a)Ground Floor
130Providing and fixing of 12mm thick Clear Toughened Glass Frameless Door With Dorma Premium Fittings.Dorma Premium (9111198) Unilite Package BTS 75,UL PT 10 with Cover,UL PT 20 with Cover,UL US 10 Luck with Cover and PT 24,Dorma Premium (9137121) H Type Handle 450mm,12mm Clear Toughened Glass with Cutout and Hole, including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge. (Make:Dorma/Godrej)
131(a)In all Floor
132Providing and fixing 12 mm thick frame less toughened glass partition Dorma Premium (911298) PT 90 Side Connector and PT 80 Glass to glass Connector with Silicone,12mm Clear Toughened Glass with Cutout and Hole,including perimeter sealing of glass to glass joints with silicon sealant ,etc.as per drawing and specification including the cost of all materials ,T&P,etc all complete as per the direction of Engineer-in-Charge.(Make:Dorma/Godrej)
133(a)In all Floor
134Providing vision panel in flush door not exceeding 0.1 sqm(cost of glass excluded) (overall area of door shutter to be measured):
135(a)Ground Floor
136Providing and fixingof metal Hose Cabinet doors as per IS 3614part-2:1992for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved from authorized Govt. testing agency for maximum rating of 2hrs. Door frame shall be Double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet. Provision should be kept for grouting with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf should be 44mm thick fully flush double skin door. Door leaf shall be manufacture from 0.8 mm thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared and provided with necessary reinforcement for hinges, locks, Door closer, Vision panel , flush bolt . Painting system will be powder coating finished (Make:4c Fire/Steel Tech/ahlada)
137(a)Ground Floor
138Supplying and installing Aluminium System - Fixed windows made out of ALUPURE/WINPLUS/ALTECH/REKLADmake frame dimension of 39mm x 42mmfor with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3).Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of MCCOY /Dowcorning or equivalent. OR
139Supplying and installing Aluminium System - Openable windows made out of ALUPURE/WINPLUS/ALTECH/REKLAD make frame dimension of 39mm x 62.9mm & Sash dimension of 46mm x 92mmfor with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.OR
140Supplying and installing Aluminium System - Sliding windows made out of ALUPURE/WINPLUS/ALTECH/REKLAD make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.
141(a)Ground Floor
142(b)First Floor
143(C)SecondFloor
144(ii)Providing and Fixing of 6mm thick Clear toughened glass ncluding cost, conveyance, , transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
145(a)Ground Floor
146Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, , transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
147(a)Ground Floor
148(b)First Floor
149S.S.Railing : Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube,square pipe bracingas per approved design and specification, buffing, polishing etc. with cost, conveyance,labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
150(a)Ground Floor
151Structural steel work of grade - Yst 250 in riveted, bolted or welded built up sections, trusses and framed work with cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification.
152Steel work of grade - Yst 250 in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with welding and bolted with special shaped washers (Hot finished seamless type tubes) including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification.
153Supply+ Erection + Transportation of 50mm thick double skin PUF Insulated sandwich Roof Panel having core with Trapezodial sheet in Top & Micro Ribbed Liner Panel sheet in Bottom skin. The PUF panel shall be manufactured on continuous line running on uninterrupted power supply. Panel shall have pre coated GaIvalume sheet on both side of Puf. The pre coated sheet shall be of minimum 550 Mpa steel. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing type confirming to IS 12436.Top Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength. Bottom Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength.Including the cost of all materials, hardware fittings, cost of all labour, conveyance,, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-charge. (Make:Kingspan Jindal)
154Flashing Sheet
155Endcap (as per design)
156Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. etc complete as per direction of E.I.C.
157Providing and fixing Shubhwood WOOD POLYMER COMPOSITE (Profile and Colour as decided by Client / Architect)Plank . This material is produced exclusively by Shubhwood, allowing Subhwood to maintain the high quality of these products. The panels (125 mm x 18mm size) have a texture embossed into the surface to achieve various aesthetics. These textures include brushing, sanding and wooden effect. The profile should be installed on 50mm x 25mm aluminum section of thickness 1.2mm of Hindalco or equivalent aluminum.The item shall be inclusive of the fittings and fabrication costs and the accessories required to do so.It should be resistant to steam and crack, with all necessary fittings including cost of all materials, labour, conveyance,loading unloading, tools and plant,sundries etc all complete as per techinical specification and direction of Engineer in Charge.
158Structural Gzazing : Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
159Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
160(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
161(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge.
162The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head.
163However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/ IEC 17025.
164Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mminsulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick hard coated low emmissivity glass, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
165Compound wall : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
166Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
167(a) Upto 1.5 Mtr Depth
168(b) Behind 1.5mtr to 3.00Mtr Depth
169Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
170Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
171Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradientincluding cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
172Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
173Ground Floor
174Providing, lifting, hoisting and layingin position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
175(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
176Ground Floor
177(B)R.C.C. Plinth Beam
178Ground Floor
179(C)R.C.C. Beams, columns, grider and bressmer etc.
180Ground Floor
181Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS)with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken& quantity will be calculated on standard weight.Lap length of bars& Weight of binding wire will not be considered for measurement and payment.)
182Ground Floor
183Providing and laying Brick masonry work in Superstructure usingFly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, all taxes, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
184Ground Floor
185Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
186Ground Floor
187Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer12mm thick in CM 1:6 (1 cement : 6 coarse sand) andtop layer of 6mm thick cement plaster1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
188Ground Floor
189Providing & Painting two or more coats with Premium Acrylic Smooth Exterior Paint with Silicon Additives of required shade after preparation of surfaces including brushing the suface to make free from foreign materials, sand papering, Priming, etc. including the cost, conveyance, taxes of all materials, cost of all materials, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make:Dulux/Nerolac/Berger/Asian Paint)
190Ground Floor
191Supplying, fitting & fixing of M.S. grill made out of M.S. flats/square bars including wheel track, gear, bearing etc. as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
192Ground Floor
193Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
194Wheel above 50 mm dia (Ground Floor)
195Providing and Painting two coats with synthetic enamel paint of approved make, quality and shade on new Steel work to give an even shadeover an under coat of primer of approved brand and manufacturer including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, staging, T&P, etc, all complete as per the direction of Engineer-in-charge. (Note- colour and shade shall be approved before procurement and use.)
196Ground Floor
197Supplying ,fitting and fixing of ISMBSections for cow catcher (6.4m x 1.5m) including labour for lifting,hoisting and placing in position to required size and length ,pre fabricating by cutting to sizes,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
198Cow-Catcher at entrance Gate
199Providing ,Supplying & Fixing of 80mm dia heavy gauge G.I. Pipe for cow catcher (6.5mX1.5m) including labour for lifting,and placing in position to required length,pre fabricating by cutting to required length,priming including cost of all materials, cost of all labour,loading,unloading at site ,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
200Cow-Catcher at entrance Gate
201Supplying ,fitting and fixing of 25x6 MS Flat including labour for lifting and placing in position to required length, pre fabricating by cutting to require length ,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
202Cow-Catcher at entrance Gate
203Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron "Y" shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
204Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
205Guard Room : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
206Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
207(a) Upto 1.5 Mtr Depth
208(b) From 1.5 Mtr to 3.00Mtr Depth
209Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
210Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
211Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradientincluding cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
212Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
213Ground Floor
214Providing, lifting, hoisting and layingin position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
215(a) R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
216Ground Floor
217(b) R.C.C.Grade Beams
218Ground Floor
219(c) R.C.C. Beams, columns, grider and bressmer etc.
220Ground Floor
221(d) R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.3Mtr. Height.
222Ground Floor
223(e) R.C.C. Lintels.
224Ground Floor
225Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS)with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken& quantity will be calculated on standard weight.Lap length of bars& Weight of binding wire will not be considered for measurement and payment.)
226Ground Floor
227Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
228Foundation & Plinth
229Providing and laying of Full Brick Masonry work in Superstructure usingFly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
230Ground Floor
231Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surfaces such as ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plasteringand curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
232Ground Floor
233Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
234Ground Floor
235Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer12mm thick in CM 1:6 (1 cement : 6 coarse sand) andtop layer of 6mm thick cement plaster1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
236Ground Floor
237Supplying and finishing the plastered surface of wall using cement based wall putty (Water based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.
238Ground Floor
239Providing and applying Two Coats Plastic Emulsion Paintof approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance,loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the directionof the Engineer-in-charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger)
240Ground Floor
241Providing & Painting two or more coats with Premium Acrylic Smooth Exterior Paint with Silicon Additives of required shade after preparation of surfaces including brushing the suface to make free from foreign materials, sand papering, Priming, etc. including the cost, conveyance, taxes of all materials, cost of all materials, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make:Dulux/Nerolac/Berger)
242Ground Floor
243Providing and Painting two coats with synthetic enamel paint of approved make, quality and shade on new Steel work to give an even shadeover an under coat of primer of approved brand and manufacturer including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, staging, T&P, etc, all complete as per the direction of Engineer-in-charge. (Note- colour and shade shall be approved before procurement and use.)
244Ground Floor
245Providing and laying of 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand)including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/Kajaria)
246Ground Floor
247Supplying, fitting & fixing of M.S. grill made out of M.S. flats/square bars including Wheel,wheel track,gear,bearing etc. as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
248Ground Floor
249Supplying, fitting & fixing of well dressed and seasoned sal wood choukath of approved size wrought and put up in door frame including two coat of coaltaring to wall and lintel side faces, in all floors including cost, conveyance,costof all labour, labour cess, T&P etc. complete as directed by Engineer-In-Charge.
250Ground Floor
251Providing and fixing 35 mm thick Single Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters inclussive of 4 Nos of Stainless steel Butt Hinges (100mm x60mm x2.5mm), 40mm stainless steel screws,1 No T72V door closer (CE certified) (40 - 80Kg)( Godrej - 3495), 200 mm Door Handle set with Lock Body 1CK ( Godrej - 8313), 1 noDoor Stopper , 1 No of tower Bolt SS 10 X 300 mm(Godrej 3264),and 1 No of PVC Buffer with SS Screw etc,teak wood lipping around the edges & paste with 1.5mm thick laminate on both side of the flush door , etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
252Ground Floor
253Supplying and installing Aluminium System - Sliding windows made out of ALUPURE/Equivalent make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.
254Ground Floor
255Drain : Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
256Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
257(a) Upto 1.5mtr Depth
258Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
259Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
260Providing, lifting, hoisting and layingin position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
261(A) R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
262Ground Floor
263(B)R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.3Mtr. Height.
264Ground Floor
265Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS)with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken& quantity will be calculated on standard weight.Lap length of bars& Weight of binding wire will not be considered for measurement and payment.)
266Ground Floor
267Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
268Ground Floor
269Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer12mm thick in CM 1:6 (1 cement : 6 coarse sand) andtop layer of 6mm thick cement plaster1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
270Ground Floor
271Providing Cement Punning including racking out joints,brushing out dust & loose mortar , washing the surfaces with water,makinggrooves,beads & drip coarse to give ornamental finish as per drawings.
272Ground Floor
273Paver Road : Excavation in soil using Hydraulic Excavator CK-90 & Tipper with Disposal upto 1000 metres-Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000 metres.
274Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
275Construction of granular sub-base by providing close graded Material grade VI,spreading in uniform layers with motor grader on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 501
276Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 20 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
277Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
278Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfacesas persection 800 of MoRTH specifications for Road & Bridge works (5th revision)and instruction of Engineer in charge
279Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
280Supplying and Filling clean course sand in foundation and plinth, free from deliterious materials, earth, earthclods, roots and boulders etc watered and well compacted,including cost of all materials, labour , and T&P etc complete below leveling course of open foundations/approach slab etc completeas per technical specification for Road & Bridge works (MORTH 5th revision) & as directed by Engineer in charge.
281Land Scping (Grass) : Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.
282Site Preparation : Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
283Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
284Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .
285Screened through sieve of I.S. designation 20 mm
286Screened through sieve of I.S. designation 16 mm
287Screened through sieve of I.S. designation 4.75 mm
288Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
289Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
290GYM Equipments : KARIZMA COMMERCIAL MULTI GYM EVOLVE4 station gym with 2 weight stacks of 72 Kgs each Exercise Function – Leg press, Leg extension / curl, Chest press, Pec fly / Rear delt, Lat pull, Rowing, Knee raise, Push up stand etc. Durable powder coated finish Ergonomic Design / Scientific Biomechanics Arc cover for protection (Make:Viva/Cosco/Jordan)
291EVOLVE POWER SQUAT RACK Ergonomicallydesigned with smooth rounded corners for a safe workout environment.High grade Bio Mechanics.Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability.For Commercial Use. (Make:Viva/Cosco/Jordan)
292IMPORTED COMMERCIAL MULTI ADJUSTABLE BENCHE 1039 LENGTH : 1620 MM WIDTH : 760 MM HEIGHT : 810 MM TOTAL WEIGHT :61 KG(Make:Viva/Cosco/Jordan)
293OLYMPIC FLAT BENCH J 023 EVOLVE • Main Frame : Flat oval tube • Cushion : Made of PU • EN ISO 20957-1& EN957-2 approved. For Commercial Use.Size: 1720*1670*1200mm N.W.: 81kg(Make:Viva/Cosco/Jordan)
294Cable CrossoverBS-005• Main Frame : Flat oval tube • EN ISO 20957-1& EN957-2 approved • Solid Body & Sturdy Steel Frame • Size : 3836x870x2330mm • Weight Stacks: 100kgs x 2N.W.: 358KG(Make:Viva/Cosco/Jordan)
295EVOLVE FITNESS JF 12633 TIER DUMBBELL RACK Ergonomicallydesigned with smooth rounded corners for a safe workout environment.High grade Bio Mechanics.Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability.For Commercial Use.(Make:Viva/Cosco/Jordan)
296evolve- RUBBER COATED SOLID DUMBBELL * Made of hard-wearing impact resistant rubberised material, It won"t release odd smell, It provides a smooth non-tacky feel. Won"t stain hands or cause any rubber deteriorated problems 2.5 x2pair =10kg 5 x 2 pair =20kg 7.5 x2pair =30kg 10 x2pair = 40 kg 12.5 x2pair = 50 kg 15 x 2pair = 60 kg 17.5 x 2 pair =70 kg 20 x 2 pair = 80 kg 25 x2 pair =100kg 30 x2 pair =120kg Total Pairs = 20 pairs Total Weight = 580 kg(Make:Viva/Cosco/Jordan)
297evolve- COLOURED RUBBER COATED OLYMPIC PLATES * 3 hole easy grip design olympic plates and available in 29mm hole also * Tear proof, sound less & bouncy effect 2.5 x 2pair =10kg 5 x2 pair =20kg 7.5 x 4pair =60kg 10 x 2pair =40kg 15 x 1pair =30kg 20 x1 pair =40kg 25 x1 pair =50kg Total Weight = 250(Make:Viva/Cosco/Jordan)
298evolve KETTLE BELL DUMBBELL 5kgx 1pair=10 7.5kg x1 pair=15 10kgx1 pair=20 12.5kgx1 pair=25 Total Pairs=4 Total weight=70kg (Make:Viva/Cosco/Jordan)
299JF 1264 PLATE TREE Ergonomicallydesigned with smooth rounded corners for a safe workout environment.High grade Bio Mechanics.Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability.For Commercial Use.(Make:Viva/Cosco/Jordan)
300Imported POWER TOWER EVOLVE Contoured arm rests for secure positioningAngled back pad for added comfort.Multiple grip positions for easy chin ups, dips, push ups and leg raise.LXWXH : 132X61X210 CM. (Make:Viva/Cosco/Jordan)
301OLYMPIC BARBELL 20KG *Heat treatment grip bar *Max loading : 1000 lbs *Length : 2.2 mtrs (Make:Viva/Cosco/Jordan)
302OLYMPIC BARBELL 15KG *Heat treatment grip bar *Max loading : 1000 lbs Lenth : 72" (Make:Viva/Cosco/Jordan)
303OLYMPIC BARBELL 10KG *Heat treatment grip bar *Max loading : 750 lbs Lenth : 60" (Make:Viva/Cosco/Jordan)
304OLYMPIC BARBELL 7.5KG *Heat treatment grip bar *Max loading : 500 lbs Lenth : 48" (Make:Viva/Cosco/Jordan)
305TRAP BAR 20KG(Make:Viva/Cosco/Jordan)
306TRAP BAR10KG (Make:Viva/Cosco/Jordan)
307IR94064 -PLASTIC LOCK JAW (Make:Viva/Cosco/Jordan)
308Weighing Scale-Digital EQ-EB-90 Equinox Capacity 180 Kg 6mm thick tempered glass 2 inch – large LCD display Auto-step-on feature Auto off function Low battery / Overload / Error indicator (Make:Viva/Cosco/Jordan)
309High Measuring Stand-JMS-001 JMS-001 for calibration up to 2 meters high school model high jump stand with T shaped base or round base with painted steel upright calibrated both in inches and cm.JSS -01 for calibration up to 2 meters(Make:Viva/Cosco/Jordan)
310• LED console readouts: incline, time, distance, calories, pulse, speed / rpm, level, watt, fan etc. • Level Control : 16 resistance levels. • 14 kgs flywheel. • Both forward & reverse motions offer various workout options • Mp3 with speaker • Self Generated system. • Maximum user weight : 180 kg.(Viva/Cosco/Jordan)
311Commercial Group Bike CFS 4100 Ultra sturdy design. New fully covered design making it sweat proof. Adjustable seat and handle. High quality ribbed belt with tension wheel driving system. Press type braking system. Maximum user weight : 150 kg. (Viva/Cosco/Jordan)
312Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.( CERA/Golden fish/ Saint gobain)
313Sports Equipments : Providing and Fixing of Yonex Make BADMINTON POLE ( Portable & Movable ) 50kg weight on each side Metal pipe 46mm, A very strong and durable portable unit .
314BADMINTON NET ( Tournament Quality )
315Badminton racket Vector X
316Nylon Shuttle Cock Tournament Vector X
317Furniture : Providing and Placing of Executive Desk of Size 1500 mm x 750 mm x 728 mm as per Picture (Make:Godrej/Geeken)
318Providing and Placing of Executive Chair Model Ventilo Mid Back - Black as per Picture (Make:Godrej/Geeken)
319Providing and Placing ofvisitor chairModel–1018 (Black) as per Picture (Make:Godrej/Geeken)
320Providing and Placing of Gain Storage 500 - For Athletes 2 door as per Picture (Make:Godrej/Geeken)
321Providing and Placing of Wooden Bench (2400 mm long) as per Picture (Make:Godrej/Geeken)
322Providing and Placing of dining chair Model– Unwind ssas per Picture (Make:Godrej/Geeken)
323Providing and Placing of2 Door PLU Lockers 1830Hx380Wx450D as per Picture. (Make:Godrej/Geeken)
324Providing and Placing of Dustbin as per Picture. (Make:Godrej/Geeken)
325Sinages : Directional & Fire Exit - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings,including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
326Fire Signages - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS stringsincluding of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
327Room Signages - Type - 1, Size - 450mm x 200mm made of 6mm acrylic board + vinyl/PVC sticker with studincluding of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
328Outer Signages : SS English Letter of Size 400mm
329SS Odia Letter of Size 300mm
330Internal Electrification : Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable (Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make) in surface / recessed 2 mm thick PVC conduit with modular switch (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Crabtree(Athena)/Anchor(Vision)or equievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
331Single light point controlled by one 6A switch or first light point of group control.
332Subsequent point of group control
333Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Crabtree(Athena)/Anchor(Vision)or equievalant reputed make.as per direction of Engineer-in-charge All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
334Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Crabtree(Athena)/Anchor(Vision) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
335Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) /Crabtree(Athena)/ Anchor (Vision) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
3361 nos 6 Amp 3-pin socket with 6 Amp switch.
3372 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
338Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modularsocket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
339Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate etc. complete as direction of Engineer-in-charge. (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Crabtree(cat no.-ACT0202504) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
340Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. (Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makes as per direction of Engineer-in-charge )
3412X1.5 + 1X1.5 sqmm FRLS Cu wire (for circuit wiring)
3422X2.5 + 1X2.5 sqmm FRLS Cu wire(for Light plug circuit wiring)
3432X4 + 1X4 sqmm FRLS Cu wire (for power plug )
3444X6 + 2X6 sqmm FRLS Cu wire (submain)
345Supply, delivery and fixing of Ceiling fan hookbox made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
346Supplying, installation testing and commissioning following type of light fixture(Recessed or surface mounted)
347250W LED Sports Light fitting (>=28000 Lumen) with 80CRI (4KV inbuild & 10KV external surge protection, IP66, Aluminium die cast body,cool white-(5600K to 6500K),Impact resistance of IK08, Over current, short circuit, over voltage , dust & water protection, entire luminarie should act as Heat shrink(LED life>50000 burning hour),The fixture must have 3-4mm thick safety glass cover with BIS Certified driver of IP67 protection & Driver of make Moso/Inventronics/Sosen or equivalent. Light Fixture of make Bajaj CAT No:(AMPL F 480L WH) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro .(Note:The fixtures proposed must have passed LM 79 reports from NABL laboratory will be submitted with Warrenty of Minimum 5years and Fixture must have complay lighting design requrement of >1000lux with uniformity as per requirement of sports)
348Surface LED Light fitting (4500 Lumen) of make(Make BAJAJ (CAT No:BPRF45W WH LED) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wiproor equievalant lightening technologies reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
349Surface LED Light fitting (3600 Lumen) of (Make BAJAJ (CAT No:BPSF36W WH LED)or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wiproor equievalant lightening technologies reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
350Surface LED Light fitting (2000Lumen) of (Make BAJAJ (CAT No:BCLAB 20W WH LED P) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wiproor equievalant lightening technologies reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
351Supplying, installation testing and commissioning of 9 MTR galvanized PU paintedoctagonal pole with 100W Stereet light, 6 A MCB, Connector with all other wiring material.Pole with top dia - 70 MM ,Bottom dia - 155 MM, PCD- 250 MM, thickness 3.1 mm with foundation bolt and decorative bracket of 1 MTR long suitable for holding 1 nos 100W LED street light . The pole design must suitable for wind speed as per IS 875. IS 2062 grade E350 / BS EN 10025 S355 .Low Silicon (= 0.06%) High Tensile Steel Sheet as per IS 2062 / BS EN 10025 Or Equivalent. Hot Dipped Galvanized, as per BS EN ISO 1461 Average coating should be 55 microns. E250 Grade as per IS 2062 of Make(Bajaj Cat no:BOP 9030 or equivalent of Klite/ Valmount)100W LED street light withEpoxy powder coated pressure die-cast aluminium housing and LED driver cover with silicon gaskets provided for LEDs and control gear compartments. LEDs Must have with non-yellowing secondary lens optics. The driver used is specially designed to have built-in surge voltage,open/short circuit protections. External surge protection of 10 KVprovided for additional safety.Side entry mounting for 55 to 60mm OD pipe bracket. Top maintenance: Access to driver is from the top. The fixture must have > 12000 LM with peak power consuption of 100W. The lighting fixture must deliver avg. 25 Lux of 6 MTR road (make:Bajaj Model No. ENXT P 120LWH or equivalent to Phillips / LT)
352Surface/Recess LEDLight fitting (800 Lumen) of make BAJAJ (CAT No:BGSLO SLEEK SURFACE 8W WH PRO SQ) / Equivalent /Philips/Lighting Technologies.
353LEDBulk head Light fitting (1000 Lumen) of (make BAJAJ .(CAT No:BIBWP 10W LED)/ or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wiproor equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
354Supply & Installation of GATE LED Lightof make BAJAJ (CAT: BGCL 40W LED WH) & equivalent of LT/Philips.
355Surface/Recess LEDLight fitting (1500 Lumen) of make BAJAJ (CAT No:BGSLO SLEEK SURFACE 15W WH SQ) / Equivalent of Philips/Lighting Technologies.
356Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required Make-Equievalant higher model withas per BIS normof Bajaj/Crompton/Khaitan/Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
3571200 mm sweep
358Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre Make-Equievalant higher model withas per BIS normof Bajaj/Crompton/Khaitan/Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
359300 mm sweep fibre body fresh air fan
360DBS : Supplying and fixing following way, TPN/SPN, sheet steel, MCB distribution board, 415 V/230V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS) Make-Legrand(kinox)/L&T(AU)/Anchrd(Uno plus)/Schneider/Siemens(Betaguard)/panasonicequievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
3614 way, Double door as LDB.
3626 way, Double door as PDB.
36312 way, SPN DB as UPSDB.
3644 way, Vertical TPN DB.
365Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required. Equievalant higher model ofMake-Legrand/Schneider/Siemens/panasonicequievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
36663 Amps4P, 100 MA RCCB
36763 Amps4P, 10 KA FP MCB
36832 Amps DP,10 KA MCB
3696 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
370Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
37120 mm
37225 mm
373Supplying and fixing of following sizes of heavy gauge steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
37425 mm
375Wiring for point/circuit wiring along with earth wire of following size ofPVC insulated PVC sheathed FRLS multicore flexible copper cable laid on existing cable tray/through conduit as required. (Make:-Polycab/Finolex/KEI/Anchor/RR kable)
3763C X2.5 sq.mm . (for Light Point wiring)
377Lightening Protection System : Supply , Installation, Testing & commissioning ofAir Terminal ESE -50. Air Terminal comprised of separate electrically isolated dual copper panels surrounding an Earthed central finial should be coated with chrome for environmental protection.The upper section of the central finial shall be rated to withstand 40KA impulse current and it should be made up of solid brass rod and its length should be more than 85mm above the surrounding panels.(Make:Stromking/ Satalite-3/Indilac)
378The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 03 metres above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2mtr but radius of protection will change according to height.
379Supply& install of30 meter 70sq.mm cross section down conductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr
380Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia60mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 32mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in mm will be 5,65,200 for 3mtrs length and Cross Sectional Primary conducting area is 192 sq.mm.
381Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag.
382Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading.
383Split AC : Supply, Installation, Testing, Commissioning of highwall split units of following capacities including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make - Voltas, Carrier, LG or Hitachi )
3842.0 TR capacity.
385Supply, instalaiton, testing and commission of SOFT COPPER REFRIGERANT PIPING OF 18 swgfor high wall uints of various sizes with necessary supports, fitting interconnecting the liquid and the suction lines between the aircooled outdoor unit and the indoor unit. Both suction and liquid line shall be insulated with 19mm thick nitrle rubber tubes as insulation material and shall be covered with treated woven glass fiber reinford covering etc. complete as per the specifications and approved drawings.
3861 1/8" Dia
3875/8", Dia
388Supply, Installation, Testing & Comissioning of 5 KVA IGBT based True Online Smart UPS dual mains I/P with 12V/18AHX15 Nos of VRLA Sealed maintenance free(independent 12V units cell bank capacity designed for end cell voltage of 1.75V at 27 degree C.) Battery with 30 Min Back Up on 90 % Running load along MS Battery Rack & Battery interconnection link with CB and other standard accessories for installation.(Make: RIELLO / EMERSON /APC ).
389LAN & Telephone : Supply and laying of Cat6 4-pair 23AWG LSZH UTP Cable for data and voice in existing conduits/trunking.Make: Digisol/ Schneider/ AMP.
390Supply and termination of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box. Make: Tyco-AMP/ Schneider/ Digisol
391Supply and Fixing of Cat 6 24-port loaded, Modular Jack Panel having 24-port individually replaceable module. Make: Tyco-AMP/ Schneider/ Digisol
392Supply Installation of 24port 10/100/1000Mbps L2 Managed Switch with Four SFP Ports. Make: Cisco/ HP/ Digisol / Netgear
393Supply and Fixing of Cat6 Factory crimpped moulded 1mtr patchcord. Make: Tyco-AMP/ Schneider/ Digisol
394Supply and Fixing of Cat6 Factory crimpped moulded 2mtr patch cord. Make: Tyco-AMP/ Schneider/ Digisol
395Supply and Fixing 30 Pair MDF BOX with Krone Module & Steel Back Mounting Frame
396Supply Laying of 2 pair 0.5 cupper cable. Make : Finolex/ Polycab/RR/ Kei.
397Supply of 20 pair 0.5mm PIJF armode cable. Make :Finolex / Polycab / Kei
398Supply, installation, testing & comissioning of EPBAX System 4 P&T Lines / 2 Digital / 24 Extensions expandable up to 48 Extensionhaving Features: Call Pickup ,Call Forwarding ,Direct inward Dialing Direct Outward Dialing, Calling Line Restriction etc as required. Make: MATRIX/SYNTEL/NEC
399Supply, installation, testing & comissioning of Push Button Telephone Set. Make: PANASONIC/ BEETEL/ BPL
400Supply, installation, testing & comissioning of Digital Key Telephone as required. Make- MATRIX/ SYNTEL/ NEC/BEETEL/PANASONIC
401Supply & Fixing of 9U Wall Mount Rack loaded with one no 4Skt 6/16A power distribution unit, 1no cable manager, 1no 90CFM FAN, one pkt H/W screw. Make: Valrack/APW/Retail
402Fire Extinguishers - First Aid : Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
403Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
404Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
405Automatic Fire Detection System : Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.
406Supplying, installation, testing and commissioning of Addressable Beam(Infrared) Detector including Transmitter & Receiver, complete with base and isolator as per direction of Engineer-in-charge.
407Supply and installation of visual type response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors operating on 24 VDC installed above the false ceiling or below the false floor, complete with all accessories and fixing materials as required and as directed by Engineer-in-charge.
408Control Panel : Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contactper loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge.
409MCP : Supplying, installing ,testing and commissioning of break glass typeManual call point . The Manual call pointwith monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed.
410Electronic Hooters : Supplying, installing ,testing and commissioning of Hooter Cum Strobeat 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete andas per technical specification. The devices shall be ofEN and LPCP listed (Make: Bosch or Equivalents)
411Wiring : Supplying and drawing of2X1.5 sq.mm PVC insulated PVC Sheathed FRLScable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.
412Supply, delivery and laying of following sizes of Steel Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge.
41320mm dia
41425mm dia
415CCTV : Supply and Installation of Indoor Dome IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell
416Supply and Installation of Outdoor Bullet IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell
417Supply and Installation of 16Ch 4K Network video Recorder added with 16TB Hardisk storage.(Make: W BOX/ Pelco / Honeywell)
418Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Finolex, D- Link, Secureye.
419Supply and Installation of 24port IEEE 802.3af and at POE 10/100/1000Mbps managed Switch with minimum Two combo ports with minimum PoE power budget of 375W per switch. Make: Cisco/D Link/Secureye.
420Supply and Installation of 32" Commercial Display.Make: Samsung/LG/Panasonic
421VENTILATION Ducting & Grills Rectangular GI Ducting
422Supply, installation, balancing and commissioning offactroy fabricated G.S.S. (Class VIII 120 GSM) rectangular ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc as per approved drawings and confirming to SMACNA standard of following sheet thickness complete as required.
42324 G ( 0.6 mm)
42422 G (0.8 mm)
425Acoustic Lining of Duct : Supply & fixing of Acoustic lining of supply air duct and plenum with 12mm thick rigid thick boardglass wool having density of 48Kg/CuM, with 25 mmX 25 mm GI section of 1.25 mm thick, at 600 mm center to center covered reinforced plastic Tissue paper & 0.5 mm thick perforated Aluminium sheet (30% perforation) fixed to inside surface of the ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc as required & as per specifications. and as per approved shop drawings.
426Supplying, installation, testing and commissioning of following direct driven Tube axial type fan and casing suitable for smoke exhaust application & for 300 Deg C for 2 hours Class F rating. Motor shall be suitable for 415 Volt 50 c/s, 3 ph AC supply and of efficiency class IE2.The fan shall be equipped with mounting bracket & outlet cone required at discharge.
4272500 cfm , 10 mm Spwg
428External Electrification External panel Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof( IP65)M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.
429Busbar -400 ALbusbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
430One (1)-Incomer feeders each consisting of
431One (1) - 400 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 400/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
432Two (2) - Outgoing Feeders 1no for bldg panel & spare each comprising of
433One (1) - 250 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 250/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
434Panels
435Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.
436FLOOR PANEL
437Busbar -400 ALbusbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
438Two (2)-Incomer feeders each consisting of
439One (1) - 200 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 400/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
440One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
441One(1) - 200A 4P changeover switch
442One (1) - 200 Amp, 36 KA, 4P MCCB
443Four (4) - Outgoing Feeders For Ventilation comprising of
44432 Amps. MCBTP 10 KA, 2hp DOL starter with SPPand O/L protection, ON/OFF push button , Indicating lamp, with auto/ manual selector switch, as required.
445Twelve(12) - Outgoing Feederseach comprising of
446One (1) 40 Amp. 25KA 4P MCCB
447One (1) -No Feeder for External Lighting
448One (1) 40 Amp TPN 25 KA MCCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required.
449PANEL AS ABOVE - Feeder piller for external lighting
450Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 copperbusbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
4511 No - 40 Amp 4P MCB Incomer
4526 Nos - 16 Amp SP MCB Outgoing
4531 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
454Cable
455Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
4563.5C X 120 sqmm
4573.5C X 35 sqmm
458Supplying & Testing of 1.1 KV grade Copper XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
4593C X 6 sqmm
4602C X 10 sqmm
461Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
462upto 35 Sqmm(clamped with 1mm thick saddle)
463Above 95 Sqmm and upto 185 sqmm(clamped with 25/40X3mm MS flat clamp)
464Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required
465upto 35 Sqmm
466Above 95 Sqmm and upto 185 sqmm
467TERMINATION OF CABLES :-
468Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
4693.5C X 120 sqmm
4703.5C X 35 sqmm
4713C X 6 sqmm
4722C X 10 sqmm
473Cable Tray : Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.
474150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
475300 mm (W) X 50 mm (H) with 1.6 mm thick sheet
476Earthing
477Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
478Providing and fixing 25 mm X 5mm copper strip on surface or in recess for connection etc as required.
479Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
480Providing and fixing earth bus of 50mm X 5mm copper strip on surface connection etc as required.
481Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
482Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
483Supply, delivery and laying of following sizes of 2mm thick PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required and as per direction of Engineer-in-charge.
48420mm dia
48525mm dia
486Fire supression system : Supply, installation, testing and commissioning of5 LB Clean Agent system complete with all necessary Clean Agent FK-5-1-12 / Novec 1230 (UL listed ) gas with PESO approved Cylinder , fitting, support , and accessories, connected with CE , PI Mark& PESO approved DLP Valve, End of Line Adaptor and Pressure Switch. Cylinder will be Helium Leak Tested to 10-7 mbar l/s for leakage proof(Make:SUPREMEX/FIREBOY / AMEREX or equivalent )
487Supply & Laying of Linear pneumatic heat Detection Tube with all necessary fittings & supports.
488Supply, installation, testing and commissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should have Provision for integration with Fire Alarm/ SCADA/ BMS System.(Make:SUPREMEXor equivalent)
489Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required.
490110 mm dia
491Solar PV : Supply,installation,testing & commissioning of poly crystalline solar pv panel of 3KWp along with inverter of suitable capacity(Make: Delta/Sova/Renesys)and meeting following condition/requirement.
492a)Minimum capacity of solar panel shall be 300Wp
493b)The solar panel frame shall made of aluminium
494c)The support shall be made of GI
495d)The top cover of solar panel shall be with 6mm thick tonghend glass
496e)Transformerless inverter with dual MPP trackers
497f) Array junction box shall be suitable for PV array
498g)Laying of 1.1KV grade XLPE copper conductor armoured power cable with GI perforated cable tray suitable for connection from solar pv panel to inverter(Distance from solar array installation to inverter may be taken as 20 mtr)
499h)One number energy meter installed for showing allelectrical parameter.
500INTERNAL (P.H) : Providing all materials, labour, T&P for laying/fixing of following dia CPVCpipesS.D.R-11 as perIS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
50150mm dia
50240mm dia
50332mm dia
50425mm dia
50520mm dia
506Providing all materials, labour, T&P for laying/ fixing of following dia uPVCpipesSch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
50750mm dia for Drinking & Flushing from source to GL
50850mm dia for Drinking & Flushing from GL to OH Tank
509Providing all materials, labour, T&P for laying/fixing of following dia uPVCAquasafe pipesas per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screwin all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
51050mm dia
511Providing all materials labour, T&P for making grooves in bricks/stonemasonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification &direction ofEIC.
512Providing all labour,T&P for cutting holes in bricks or stone masonry wall for takingpipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction ofEngineer-in-charge.
513For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
514For 75mm to 150mm diapipe to pass in250mm thick wall
515Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
516Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO.(As per Art no.1008& HSN Code-84812000 of ZOLOTO)
51725mm dia Bronze ball valve
51840mm dia Bronze ball valve
51950mm dia Bronze ball valve
52032mm dia Bronze ball valve
52150mm dia brontz horizontal check valve
522Providingall materials, labour, T&P for fitting and fixing white glazed vitreous china Wall/Floor mounted water closet Rimless (European pattern)confirming to IS 2556: ART-8-2004 ,with p-22Trap with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE.
523SLS-WHT-6851S300UFSingle Piece-WC with UF soft closeseat cover, Hinges, Fixing Accessories,Accessories Set and Cistern fittings,Size: 360x725x735 mm, S Trap-300 mm
524Supply all materials and labour for fitting and fixing offollowing size white glazedvitreous china Half Padestal wash hand basinof approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4)etc. including all taxes, duties, transportation etc. all complete as per direction of EIC. (Make:JAQUAR/HINDWARE/CERA/PARRYWARE)
525Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing AccessoriesSize: 620x480x185 mm& FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801
526Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous chinaCROTO urinal basinconfirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge.(Make:HINDWARE/PARRYWARE/CERA)
527Urinal CROTO (Back inlet)(30X33X45cm) starwhite
528Providingall materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) "P" or "S" type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA. (As per Model-Matrix Set of Hindware)
529Matrix set of Hindware
530Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.(Make:JAQUAR)
531Shortbody Bib cock with Wall Flange(As per Cat. No.:KUP-CHR-35079PMof Jaquar)
532Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook ALD CHR -573 of JAQUAR
53315mm dia Angular Stop Cock with wall flange (As per Jaquar, Cat. No.: KUP-CHR-35053PM)
534Liquid Soap dispenser with glass bottle (As per Jaquar, Cat. No.: AKP-CHR-35735P)
535C.P. Toilet Roll holder with stainlesssteelflap.. (As per Cat no.ACN-CHR-1153S of Jaquar)
536Towel Ring Round (As Per Jaquar,Cat no.:ACN-CHR-1121BN)
537150mmX150mm square trapwith 5mm Border (As per Prayag, Cat. No.: FT-31 M)
53832mm Half Thread Waste Coupling (As per Jaquar, Cat. No.: ALD-CHR-709)
53932mm Full Thread Waste Coupling (As per Jaquar, Cat. No.: ALD-CHR-705)
54015mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per Cat. No-805B of Jaquar)
541Extension Piece (15 x 25 mm) (As per CERA, Cat. No.: F8070301)
54232mm dia C.P. Coat Hook (Double)(As per Cat. No. ACN-CHR-1161N of Jaquar)
54332mm dia CP on BrassBottle Trap(As per Cat. No. ALD-769L250x190 of Jaquar)
544Hand Dryer SMART FLOW.(As per Cat no HDR-WHT-M04A of Jaquar)
545Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge
546Design Mirror(700/500 size)(Parryware/Cera)
547Single Lever Exposed Parts Kit of Hi-flowDiverter Consisting of Operating Lever,Cartridge Sleeve, Wall Flange (withSeals), Button Assembly Sleeve &Button (Compatible with ALD-079N)(As Per Cat. No:Cat. No: KUP-CHR-35079NKPM ofJaquar)
548Pillar CockCat. No: LYR-CHR-38011 of Jaquar
549Urinal Valve Auto Closing System withBuilt-in Control Cock & Wall Flange Cat no PRS CHR-077 of Jaquar
550Bathtub Spout with Wall FlangeCat. No:CHR--SPJ-15429PM of Jaquar
551Concealed Body for Single Lever HighFlow Diverter with Button Assembly,But without Exposed Partscatno. AL;D -CHR-079n OF Jaquar
552Overhead Shower ø105mm RoundShape Multi Flow with Air Effect(ABS Body & Face Plate Chrome Plated)with Rubit Cleaning System CAT NO. OHS CHR-1719 OF jaquar
553Shower Arm 600X25X25mm SquareFlangeCat no.-SHA CHR455L600 of jaquar
554Towel Rack 600mm long with LowerHangers, Stainless SteelAKP CHR-35781PS of jaquar
555Providing all materials, labour, T&P for fitting and fixing of following size of 12mm thick toughened glass for urinal partition of approved make in all floorwith edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge.
556Toughened glass partition of Size-900mm ht. x 450mm width for Urinal Partition.
557Providing all labour, T&P and machinaries forinstallation,commissioning of Three phase sensor with level indicator (Drinking & Flushing OHT) and cables etc as per direction of EIC.
558Supply, installation,testing & commisioning of water cooler cum purifier with chiller infloor of following capacity:60/80 SS including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. (As per Model :AG Green pure Chill 80SS of Aquaguard/IONEXCCHANGE)
559Zero B Storage Cooler cum UV Water Purifier 60/80/120 AquaguardGreen Storage Cooler-cum-Purifier Model- AG Green Pure Chill 120PSS UV,
560CONSTRUCTION OF 150MM DIA GRAVEL PACKED PRODUCTION WELL THROUGH HAND BORING (WATER JET) METHOD WITH SANITARY/SALINE SEALING- 1 No.
561Supplying all materials, labour, tools and plant and setting up boring equipments including erection of suitable staging for installation of the required size of tubewell, dismantling and removing the same after completion of the work, includifng transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc. levelling of site all complete as per direction of Engineer-in-charge.
562Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge
563Supplying all labour, tools and plants and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as perthe direction of Engineer-in-charge
564Labour for drilling pilot bore from 0 to 360 mtr
565Supplying all labour, tools land plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer-in-Charge.
566Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
567Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
568Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
569Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the positioin and removing the same after use all complete as per direction of Engineer-in-Charge.
570Supplying alllabour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge
571Cost of 150mm Dia casing Pipe
572Cutting slots in 50mm dia Pipe
573Cost of 50mm dia end plug
574Cost of 50mm dia Cap
575Bentonite Powder
576Cost of 50mm casing pipe
577Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc all complete as per the direction of the Engineer-in-charge
578Cost of Gravel
579Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 150mm dia pvc Casing pipe etc all complete as per the direction of the Engineer-in-Charge excluding the cost of Cement.
580Cost of Cement
581Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 150 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge. (Excluding the cost of cement)
582Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge.
583Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
584Bore well protectionchamber
585Installation of Submerssible pump set in the Bore-Well : Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
5862HP Three Phase 5 stage submersible pump set.
587DOL control panel
58850mm S. S. Nipple, S. S. bolt & clips
58950mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
5902.50mm Sqm Submersible flat cable
591Steel rope with cover
59220mm dia rigid U-PVC pipe
59350mm dia HDPE pipe
594Labour charges for lowering, testing, commissioning & transportation to site etc.
595Supplying and Fixing of Sintex Triple LayerWhite (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.(Make -Sintex)
5965000 Litres Capacity Triple Layer white Tank for Drinking& Flushing & Fire Fighting
597External (P.H) : Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth workexcavation in all kinds of soil & rock and filling the cavityof the chamber with excavated & selected earthlevelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC.
598300mm x 300mm x upto 450mm deep gully trap.
599Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
600Inspection chamber Inside size 760mmx760mmx460mm
601Supplying all materials, labour, T&P and constructing man hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
602Man hole chamber Inside size 910mmx910mmx910mm
603---- do --- addl depth of 0.30m upto 4.50m depth
604Supplying all materials, labour, T&P, fitting and fixing uPVC SWRpipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as perspecification & direction of the Engineer-in-charge. Make: ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME.
605110mm dia soil pipe
606110mm dia waste pipe
607Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approvedmake confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME.
608110mmPushfit Coupler
609110mm x110mm P-Trap
610110mmx87.5ºbend
611110mmx87.5º door bend
612110mmx45ºbend
613110mm dia Single Tee
614110mm dia Single "Y"
615110mm dia Single "Y" with Door
616110mm dia Double "Y"
617110mm WC connector straight with lip ring
618PVC Clamp Suitable for 110mm dia pipe
619110mm dia Vent cowl
620110mm Socket plug
621Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4984/2016 of the following outside dia for Pressure rating PN-6 including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
622110mm dia u-pvc pipe alround concrete
623160mm dia u-pvc pipe alround concrete
624200mm dia u-pvc pipe alround concrete
625Supplying all materials, labour, T&P, fitting and fixing uPVC SWRpipes (Type-A) For rain water Stacking pipe in the Duct(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as perspecification & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY.
626160mm dia Bend (87.5 degree)
627160mm dia pushfit coupler
628160mm dia pipe
629160mm dia Bend (87.5 degree) Door bend
630Vertical Grating 150x150mm for Rain water gutter on terrace ,opening to 160mm dia Rain water pipes
631Supplying of all materials labour & T&P for drilling of 100 mm Hole over 250 mm dia CM pipe through Core Cutting Machine and PVC Weldingafter inserting of 100mm dia UPVC SCH-85 with 200 mm dia pipe for froming T joints etc. Complete as per direction of EIC.
632PVC Core drilling on 250mm Dia Pipe .
633Pvc Welding with 100mm dia UPVC pipe and 250mm dia UPVC CM Pipe for a forming a T-Joint
634Resprotary systemFor rooftoprain water borewell inside 2mtr dia recharge pit
635Supplying of all materials labour & T&P for drilling of 100 mm Hole over 250 mm dia CM pipe through Core Cutting Machine and PVC Weldingafter inserting of 100mm dia UPVC SCH-85 with 200 mm dia pipe for froming T joints etc. Complete as per direction of EIC.
636PVC Core drilling on 250mm Dia Pipe .
637Pvc Welding with 100mm dia UPVC pipe and 250mm dia UPVC CM Pipe for a forming a T-Joint
638Construction of 50 users RCC Septic Tank of inner size 5.00x1.6x1.40m with 2 year cleaning interval
639Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
640Upto 1.50m initial lift
641From 1.50m to 3.00m lift
642Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
643Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
644Providing and laying plain cement concrete (1:3:6) in foundation and bottom layersusing 40mm size hardblack crusher broken granite metal of approved quality and size from approved quarry includingcost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
645Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
646Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
647Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
648Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
649Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smoothover brick workwith waterproofing cementbased compound of approved quality including finishing smoothto proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC.
65012mm thick C.P. 1:3 with punning
651Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
652560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)or equivalant
653Providing, fitting & fixing of Poly Propyleneman hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
654Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
655Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
656Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
657Construction of Soak Pit ofInner Dia 1.50m & depth 3.00m
658Earth Work:
659Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
660Brick masonry soakway pit 1.40m dia x 2.00m deep
661CONSTRUCTION OF 10000 LTR RCC SUMP
662Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge.
663Initial lift
6641st Extra lift
665Supplying all materials, labour, T&P and providing filling sand including watering, ramming and conveyance of all materials to site.
666Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.
667Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
668Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
669Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
670Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
671RCC walls
672Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.
673Inside portion
674Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
675Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification.
676Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
6771.00HP Three Phase 5 stage submersible pump set.
678DOL control panel
6792.50mm Sqm Submersible flat cable
680Steel rope with cover
681Labour charges for lowering, testing, commissioning & transportation to site etc.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail