Public Works Department-PWD has published Construction Of Govt. Senior Secondary School Kolka ( Additional Accommodation ) Construction Of Ground Floor Including Building Portion Ws And Si And Site Development ) Construction Of Govt. Senior Secondary School Kolka ( Additional Accommodation. Submission Date for this Tender is 21-10-2021. Building Work Tenders in chamba Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Cutting in earth work in all height and depth in all kinds of soils including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including dewatering wherever required, setting out true to the required lines, grades, width, cutting, side slopes, trimming of bottom and levels as shown in the drawings and as directed by the Engineer-in-charge at site, according to the HPPWD specificationand sorting of useful and un-useful material for filling in roadway, embankments for grade improvement and leveling to the required grades and then disposing of all excavated materials in acquired width of the road or on approved dumping site/sites through all modes of transportation including head load, animal loads or mechanical means along with its leveling and fine dressing and carriage of all labour, machinery, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and /or by labour (if any required complete as per the direction of the as per the direction of the Engineer-in-charge.Recovery of stones to the tune of 110.13cubic metrequantity @ Rs. 300/- only ( at the rate of rupees threehundred ) only of percubic metre shall be effectedfrom the contractor’s running bills on pro-rata basisas per actual quantityexecuted. Any loss to the public and private property during the course of execution and transportation of useful and un-useful materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respect and in all casesincluding carriageof materialwith in allleadsand lifts. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 2 | Excavation in earth work etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification ofsoil setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry whereever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanicaltransportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall beabsolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 3 | Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification ofsoil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanicaltransportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 4 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing completeincluding all taxes, carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 5 | Providing and laying mechanically mixed and vibrated plain cement concrete1:5:10( Onecementis tofivesand is toten graded crushed stone aggregate 40mm (forty millimeter) nominal size in or under water including pumping orbailing out water( surface and sub soil water), dewateringfor all heights /depths and any quantum of water including removal of slushwhich may arise at the time of laying under waterfor all heights/ depths, includingthe cost of form work andcuringfor 14 ( fourteen) daysafter completion inRetaining walls and Breast walls etcetera as per drawings and MORD technical specification section802, 900and 1200 and as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 6 | Back fillingwith granular material behind abutments, return walls, wing walls and retaining walls etc.complete as per drawings and MORD technical specification clause 1204.3.8 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 7 | Providing 100mm (Hundred millimeter) diametrePVCpipeWeep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etctraextending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drawing face complete as per drawings and MORD technical specifications clause 614, 709, 1204.3.7 oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 8 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 9 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 10 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work inBeams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floorincluding, carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 11 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness includingcarriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 12 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landingincluding carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 13 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,in all heights of propping and centring below supporting floor to ceiling uptoany heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights includingalltaxes,GST,including carriageof materialandotherincidentals within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 14 | Providing and laying mechanically mixed and vibrated cement concretework of grade M-20 (M-Twenty design mix)to obtain the minimum compressive strength of 20N/square MM (Twentynewton per squaremillimetre)with cement contentsnot lessthan 330 Kg/Per cubic metre (Threehundredthirtykilogramepercubic metre)andcuring complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings bases of columns and the like and mass concrete includingcarriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 15 | Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix)to obtain the minimum compressive strength of 20N/square MM (Twentynewton per squaremillimetre)with cement contentsnot lessthan 330 Kg/Per cubic metre (Threehundredtwentykilogramepercubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work incolumns, pillars, posts and struts upto floor all levels as per the directions of the Engineer-in-charge includingcarriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 16 | Providing and laying mechanically mixed & vibrated cement concrete work ofgrade M-20 (M-Twenty design mix)to obtain the minimum compressive strength of 20N/square MM (Twentynewton per squaremillimetre)with cement contentsnot lessthan 330 Kg/Per cubic metre (Threehundredtwentykilogramepercubic metre)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levelsas per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 17 | Providing and laying mechanically mixed & vibrated cement concrete work of gradeM-20 (M-Twenty design mix)to obtain the minimum compressive strength of 20N/square MM (Twentynewton per squaremillimetre)with cement contentsnot lessthan 330 Kg/Per cubic metre (Threehundredtwentykilogramepercubic metre)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work instair cases and connected workupto floor all levelsas per the directions of the Engineer-in-charge includingcarriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 18 | Providing and laying mechanically mixed and vibrated reinforced cement concretework of grade M-20 (M-twenty) design mixto obtain the minimum compressive strength of 20 N/mmsquare (twentynewton per squaremillimetre) withcement contents notless than 330 Kg.(Three hundredtwentykilogramme)/ Cubic metreand curing complete including form work chajjas upto any thickness and upto floor all level including finishing the exposed surfaces with cement mortor 1:3 ( One cement isto three sand) to give a smooth and even surface centering /form work and curing complet excluding the cost of reinforcement as per the directions of the Engineer-in-charge includingcarriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 19 | Providing and laying mechanically mixed and vibrated cement concreteworkofgrade M-20 (M-twenty) designmixto obtain minimum compressivestrength of 20N/mm square(twentynewtonpersquaremillimetre) with cement contentsnotlessthan330 KG (Three hundredthirtykilogramme) / cumandcuring completeincludingformwork instringcourses,coping, bed plates,anchorblocks plain window sillandin mouldingas incorniceswindow sill etcthe likeupto floor all level as per the directions of the Engineer-in-charge includingalltaxes, GST, carriage of material within all leads and liftsand other incidentals. |
| 20 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto fourgraded crushed stone agreegate 20 mm (twenty millimetre) nominal size) curingcomplete excluding the cost of form work in foudation and plinth within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 21 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size)and curing completeexcluding the cost of form work in foudation and plinth includingcarriageofmaterial, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 22 | Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinthincluding carriageofmaterial,within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 23 | Providing tor steel reinforcement for reinforced cement concretework including straightening,bending, bindingand placing in position completeas per the directions of the Engineer-in-charge includingcarriageofmaterial, carriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 24 | Stone filling under floor/ behind retaining walletctra completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 25 | Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 26 | Squaredrubble masonry coursed with hard stones of approved quality in foundation and plinth includingraking out joints in cement mortar 1:6 (onecement is to six sand) curing complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 27 | Second class brick work usingcommon brunt clay building bricks of approved qualityin super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand)curing complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 28 | Half brick masonry using second class common brunt building brick of approved qualityinsuperstructure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand)curing completeincluding and carriageofmaterial,as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 29 | Second class brick work usingcommon brunt clay building bricks in foundation, plinth in mud mortar includingandcarriage of materialwithin all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 30 | Providing and fixing 35 mm(thirty five millimetre) flush door shutters core of black board construction with frame of first class hard wood and well matched firtst class Indian teak plyveneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shuttersor as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 31 | Providing and fixing 19mm (ninteen millimetre) thick water proof commercial board in shelves / box for cup boards with butt joints and fixing with nails and screws etcetra complete the shelfshall befinishedwith6/12mm (six/ twelve millimetre)thick hardwoodedging as per the direction of the engineer-in-charge,anddrawing & design completeincludingalltaxes andcarriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 32 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 33 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300 X 16 mm ( threehundred into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 34 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete 125 mm (one hundred twentyfivemillimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 35 | Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 36 | Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 20mm (twentymillimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) sizeISI mark No. 1S-1237 with70% (seventy percent) white and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of green, yellow and maroon shade of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 37 | Providing and layingchequredtiles 20mm (twentymillimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) sizeISI mark No. 1S237 with70% (seventy percent) white and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of green, yellow and maroon shade of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 38 | Providing and laying 20mm (twenty millimetre) thick Baroda green marble work (table rubbed and polished ) in flooring on 20mm (twenty millimetre) thick cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar (one cement isto two marble dust) with an admixture of pigment to match the shade of the marble as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 39 | White glazed tiles 6mm (six millimetre) thick inskiriting or risersof stepsand dadoon 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 40 | Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 25mm (twentyfive millimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) size of NTC or equivalent ISI marked No. 1237 with70% (seventy percent) white and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of green, yellow and maroon shade with marble chips of specifiedhavingsizes 0,8,2B in skirting and risers of steps intheratioof 50% , 25% , 25% on 10mm (ten millimetre) thick cement plaster 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete with tiles of Medium shade includingalltaxes,carriage of material within all leads and lifts and as per specificationoras perthe direction of the engineer-in-chief and other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 41 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trussesandtrussespurlinsin building including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 42 | Providing and fixing angle iron door, window, clerestory window frame manufactured from steel iron section of 35 X35X5mm (forty millimetre into forty millimetre into fourmillimetre) thickness and 50 x 4 mm ( fifty into four millimetre) MS flat including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angles 50x25mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but thinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock as specified and applying a coat of approved steel primer after preteatment of the surfaceas perthe directions of the Engineer-in-charge including all taxescarriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 43 | Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 44 | Providing and fixing steel glazeddoors,windows andtop hung ventilators ofstanderd rolled steel sections,joints mitred and welded with16x3.15 mm(sixteen intothree point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15cmx10cmx10cm( fifteeninto ten intoten centimetre) size of 1:3:6( one cement istothreesand isto six gradedstone aggregate 20mm( twenty millimetre) nominal size)or withwooden plugs and screws or rawlplug and screws or with fixingclips or with bolts and nuts asrequired and ironfittings,including providing and fixing of glass panes with glazingclips and special metal sesh putty as per the direction of Engineer-in-Charge.The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 45 | Providing and fixing Fixed Steel window steel glazeddoors,windows and ventilators ofstanderd rolled steel sections,joints mitred and welded with16x3.15 mm(sixteen intothree point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15cmx10cmx10cm( fifteeninto ten intoten centimetre) size of 1:3:6( one cement istothreesand isto six gradedstone aggregate 20mm( twenty millimetre) nominal size)or withwooden plugs and screws or rawlplug and screws or with fixingclips or with bolts and nuts asrequired and ironfittings,including providing and fixing of glass panes with glazingclips and special metal sesh putty as per the direction of Engineer-in-Charge.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 46 | Providing and fixingside hung steel glazeddoors,windows and ventilators ofstanderd rolled steel sections ,joints mitred and welded with16x3.15 mm(sixteen intothree point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15cmx10cmx10cm( fifteeninto ten intoten centimetre) size of 1:3:6( one cement istothreesand isto six gradedstone aggregate 20mm( twenty millimetre) nominal size)or withwooden plugs and screws or rawlplug and screws or with fixingclips or with bolts and nuts asrequired and ironfittings,including providing and fixing of glass panes with glazingclips and special metal sesh putty as per the direction of Engineer-in-Charge. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 47 | Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windowsincluding bright finished black enamelled iron hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 48 | Providingandfixing4mm(four millimetre)thick plain glass inwindowshutter with putty andnails complete as per the direction of the engineer-in-charge, anddrawing & design completeincludingalltaxes andcarriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 49 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets of TATADurashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coatingincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredincludingalltaxes,carriage of material within all leads , lifts and as per specification approved drawing& Design oras perthe direction of the engineer-in-chief and other incidentals. The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 50 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheetsof TATADurashinein roofinghavingpropergolashapehot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coatingandback coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredincludingalltaxes,carriage of material within all leads,lift and as per specificationapproved drawing& Designoras perthe direction of the engineer-in-chief and other incidentals. The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 51 | Providing and fixingvalley90 cm. (ninety centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted steel sheets of TATADurashine /SAIL/ Zindal steel in roofingwith hot dipped metallic zinccoated sheet withtop coat of regular modified polyster (RMP)organic coating of 20 micron over 5 micron primer coating and backcoat of poltster of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet andbitumenwasherscomplete with all accessories includingalltaxes,carriage of material within all leads and lifts and as per specification approved drawing& design oras perthe direction of the engineer-in-chief and other incidentals. The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 52 | Providing and fixing M.S.B.P. sheet 1.66mm (one point six six millimetre) any thickness in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer completeas per specificationincluding carriage of material within all leads and lifts and as perthe direction of the engineer-in-chief and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 53 | Providingandfixing 50 mm(fiftymillimetre)dia M.S. hollow pipe handslipresistantwithrounded atPWDlevelat75 to 90cm ( seventyfiveto ninetycentimetre) railingwith25 mm(twentyfive millimetre) dia pipe fixed to vertical member @ 60 cm(sixtycentimetre)centretocentre including all taxescarriageof materialswithin all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 54 | Providing and fixing handrailready made M.S.hollowpipe D-section50x50mm (fifty intofiftymillimetre) diametre over23cm.(twentythreecentimetre) thickbrickwall parapet withbaluster 20x20mm (twentyintotwentymillimetre)solidsquarebars etc.completeincluding alltaxesandcarriageofmaterials within all leads, lifts asper specificationas per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 55 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm ( twentyinto teninto two millimetre) and braced with flat iron diagonals 20x5 mm ( twenty into five millimetre)size, with top and bottom rail of T-iron 40x40x6 mm,( forty into fortyinto six millimetre) with 40 mm ( forty millimetre)dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer as per the direction of the Engineer-in-charge and other incidentals.The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 56 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 57 | Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 58 | 6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( onecement isto six sand) includingcuring complete as per HPPWDspecification oras per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 59 | 15 mm ( fifteen millimetre)cement plaster in single coat on rough side of brick /concrete /stone walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm ( eighty millimetre)in girth and finished even and smooth in cement mortar 1:6 (onecement isto six sand) includingcuring complete as per HPPWDspecification or as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 60 | 15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (one cement isto sixsand) includingcuring complete as per HPPWDspecification or as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 61 | 20 mm ( twenty millimetre)cement plaster in single coat on rough side of brick /concrete /stone walls for interior plasteringin patterenupto floor two level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm ( eighty millimetre)in girth and finished even and smooth in cement mortar 1:6( onecementisto sixsand)includingcuring complete as per HPPWDspecification oras per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 62 | 15mm (fifteen millimetre) thick cement plaster in single coat onbrick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto threesand) includingcuring complete as per HPPWDspecification or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 63 | Painting two coats withsynthenticenamel paint(excluding priming coat )priming on new concrete masonry/plaster surfaces withreadymixed paint brushing for use on floors to give an even shadeincluding cleaning the surface ofall dirt,dust and other foreignmatter and sand papering asrequired as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 64 | Distempering with drydistemper of approved brandand manufacture(Two coats)andof required shade onundecorated wall surface togiven an even shade over andincluding primer coat ofwhiting after thoroughlybrushing the surface free frommortar droppings and otherforeign matter including preparing the surface even andsand papered smoothas per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 65 | Finishing wall with water proofing cement paint ofapproved brand and manufactureand of required shade ondecorated wall surfaces (onecoat) to give an even shadeafter thoroughly brushing thesurface to remove alldirt,loose or softened paint as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 66 | Providing and fixing on wall faces PVC (D-plast) 100mm dia (one hundred millimetre diametre) rain water pipes working pressure not less than 4.5 Kg (four point five) kilogram per square metre including filling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 67 | Providing and fixing on wall faces PVC (D-plast) 100mm (one hundred millimetre) dia PVC plain bend for rain water pipes includingfilling the joints with approved adhesive complete within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 68 | Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bedof dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 69 | Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) curing complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 70 | Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 71 | Providing and fixingto wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore including carriage of materialwithin all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 72 | Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore includingall taxes,carriage of materialwithin all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 73 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete includingall taxes,carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 74 | Providing and placing in position1000 (one thousand) litres net capacity PVC water storagetankofsintexISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxescarriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 75 | Providing and fixinghigh pressure PVC spigot and socket of suprememake , waste and ventilating pipes ISI marked including fixing with approvedadhesive 150 mm (one hundred fifty millimetre)dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 76 | Providing and fixinghigh pressure PVC spigot and socket of suprememake , waste and ventilating pipes ISI marked including fixing with approvedadhesive 110 mm (one hundred ten millimetre)dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 77 | Providing and fixingPVC 110x90mm (one hundred tenintoninety millimetre)dia floor trap ISI Marked ofselfcleaning designincluding fixingwith approved adhsive, costofcuttingmakingthewallsandfloors etc. completeincludingall taxes,carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 78 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approvedadhesive150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge includingall taxes,carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 79 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approvedadhesive110 mm (one hundred tenmillimetre) dia as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 80 | Providing and laying PVC plainbend of ISI marked including fixing with approved adhesiveetc.complete150 mm (one hundredfifty millimetre) dia as per the directions of the Engineer-in-charge includingalltaxes, carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 81 | Providing and laying PVC plainbend of ISI marked including fixing with approved adhesiveetc.complete110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge includingalltaxes, carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 82 | Providing and fixingPVC P or S trap for water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete150mm(one hundred fifty millimetre) diaas per the directions of the Engineer-in-charge includingall taxes,carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 83 | Providing and fixing vitreous China water closet squatting pan(Indian type W.C. pan)( earth work, bed concrete, foot rest and trapto be measured and paid for separately). Orrisa pattern No. 2004 ofsize58x40 cm.ofhindware/ Cerainwhite shadeas per specificationoras perthe directions of the Engineer-in-charge including all taxes, carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 84 | Providing and fixingPTMT coloured/whitehigh densitypolythene / poly prolylene 10 litre(ten litre)capacity lowlevelP.V.C. cistern plus)flushing cistern with a pair of C.I. or M.S. brackets complete with fittingsuchasleadvalvesyphon,15mm (fifteenmillimetre)dia PVCwall valve , couplingfor connectionwith inlet, outlet and overflow pipes 40mm(forty millimetre)dia C.P.flushbendincluding cutting holes and making good the same (overflow pipe to be measured and paid for separately) as perspecificationas per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 85 | Providing and fixing viterous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately)Flat type of size 430mm X 260mm X 350mm ( four hundredthirtyintotwohundredsixtyintothree hundredfifty)in white colour as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 86 | Providing and fixingPTMT coloured/whitehigh densitypolythene / poly prolylene 5 litre(fivelitre)capacity lowlevelP.V.C. flushing cistern with a pair of C.I. or M.S. brackets complete with fittingsuchasleadvalvesyphon,15mm (fifteenmillimetre)dia PVCwall valeve , couplingfor connectionwith inlet, outlet and overflow pipes 40mm(forty millimetre)dia C.P.flushbendincluding cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 87 | Providing and fixing vitreous China wash basin of Hindware with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 630mm X 450 mm (six hundred thirty millimetre into four hundred fifty millimetre) as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 88 | Providing and fixing vitreous China pedestal for wash basin complete recessedat the back forwash basincomplete recessed at the back for the reception of pipes and fittings.as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 89 | Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin.as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals.The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 90 | Providing and fixing charomium plated brass soap dishof ISI markedJal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge includingcarriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 91 | Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge includingcarriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 92 | Providing and fixingC.P. brass bib tap with capstan headofISI marked Jal 15 mm (fifteen millimetre) dia with capaston head as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 93 | Providing and fixingC.P. brass pillar tap with capstan head of ISI markedJal15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 94 | Providing and fixingC.P. brass angle valve 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 95 | Providing and fixingPVC connection with brass union 45cm. (forty five centimetre)Long and 15mm (fifteen millimetre) dia as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 96 | Providing and fixingC.P.brass full way valve with wheel of ISI markedJal 15mm (fifteen millimetre) nominal bore as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals.The rateis including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 97 | Providing and fixingvitrous Chinadivisionplate ofhindware/ cera for urinal 600 x 300 mm (six hundred into three hundredmillimetre)as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and liftsand other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 98 | Construting manhole with RCC top slab in 1:2:4 ( one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimetre nominal size) ,foudnation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre nominal size) in side plastering 15mm (fiften milliemtre) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement isto two sand isto four grade stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing having inside size 800mmx800mm (eight hundred millimeter into eight hundred millimeter) and 500mm (five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern one) 455mm x610mm (four hunded fifty five millimetre into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38 kg (thirty eight kilogram )weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 23cm. thickbrick wall of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate isincluding octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 99 | Providingand fixingPVCcowl of supreme/finolex make150mm (onehundred fiftymillimetre) diametre as per approved drawing, design & specification oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. ther incidental.The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 100 | Providing 200 mm (two hundred millimetre) wide cast ironrungs with chequred or rubber non slip surface including fixing in man hole with 200 X 200 X 100 mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggreegate 20 mm (twenty millimetre) nominal size. as directed bytheEngineer-in-Charge, including carriageof materialwithin all leads, lifts and other incidental.The rateis including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 101 | Supplying and fixing of cast ironmedium duty 500 mm ( five hundred milimetre)dia cast iron cover with frameweight not less than 116Kg(one hundredsixteenkiligram)as directed bytheEngineer-in-Charge, including carriageof materialwithin all leads, lifts and other incidental.The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
