Government University-GU has published Construction Of Human Resource Development Centre Hrdc Building At New University Campus Civil And Sanitary Work. Submission Date for this Tender is 02-11-2021. Building Work Tenders in University of Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in foundation, trenches, bulk excavation, including stacking soil neatly away from the edges, filling back by the sides of foundations, in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside the University Campus. Nothing extra on account of lead or lift shall be paid by the department. In All Kinds of Soil |
| 2 | Providing and laying Cement concrete 1:5:10 (1cement: 5 coarse sand: 10 graded crushed stone aggregate 40mm nominal size) in foundation and under flooring including machine mixing, consolidation, curing and Centering, shuttering/form work complete. |
| 3 | Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) including cost of curing, centering and shuttering. All work upto plinth level. |
| 4 | Brick work with F.P.S brick of class designation 75 in foundation,plinth and in super structure including cost of scaffolding, curing etc complete. All work upto floor V level. In cement mortar 1:6 ( 1 cement: 6 Coarse sand) |
| 5 | Half brick masonry with brick of class designation 75 in foundation, Plinth &Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level. |
| 6 | Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every third course of half brick masonry. |
| 7 | Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement 1.5 coarse sand 3 graded crushed stone aggregate 20 nominal size including curing, cost of centering, shuttering complete but excluding cost of reinforcement. All work upto plinth level. |
| 8 | P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 12.5/20 mm nominal size) including the cost of centering shuttering upto Floor V Level but excluding cost of reinforcement in:- Columns, walls including attached pilasters buttresses etc. Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, vertical and horizontal fins individually or forming box louvers band, facias and eaves boards lintels, bands plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All work above plinth level upto floor V level. Nothing extra shall be paid for additional height of form work. |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more. All work upto floor V level. |
| 10 | Providing Sal wood in frames of doors, windows, clearstory windows and similar work and fixed in positions including , applying two coats of wood preservative to all sides of the frame as per the satisfaction of Engineer-in-Charge at site before fixing and also including applying a priming coat of wood primer and then two or more coats with synthetic enamel paint of required shade and finish complete. All work upto floor V level. |
| 11 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 12 | P/F of 35mm thick IInd class Teak wood glazed shutter for window/clerestory windows as per required drawing, design and specification with necessary M.S butt hinges with screws including providing and fixing of 4 mm thick glass panes of approved quality with necessary beading and sash bar(Teak wood 2nd Class) and also including applying a priming coat of wood primer and then two or more coats with synthetic enamel paint of required shade and finish complete.All work upto floor V level. |
| 13 | Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire ofdia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws: 35mm thick Second class teak wood shutter and also including applying a priming coat of wood primer and then two or more coats with synthetic enamel paint of required shade and finish complete.All work upto floor V level. |
| 14 | Providing and fixing 35 mm thick ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked anodised aluminium butt hinges with necessary screwsand also including applying a priming coat of wood primer and then two or more coats with synthetic enamel paint of required shade and finish complete.All work upto floor V level. |
| 15 | Providing & fixing glass panes, with wooden fillets Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) in fixed portion windows/clearstory windows. |
| 16 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) FOR FIXED PORTION Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 17 | -------------do---------------- For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required |
| 18 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 19 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness |
| 20 | Providing and laying Cement concrete 1:5:10 (1cement: 5 coarse sand: 10 graded Brick aggregate 40mm nominal size)under flooring including machine mixing, consolidation, curing and Centering, shuttering/form work complete. All work upto floor V level. |
| 21 | 40 mm thick Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished without a floating coat of neat cement |
| 22 | Providing and laying Double charged vitrified floor tiles in 600 x 600 mm sizes(8 mm thick to 10 mm thick) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (RAK/Johnson/Somany/Kajaria) in all colours and shades as approved by the Engineer-in-charge laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete. |
| 23 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of approved make (RAK/Johnson/Somany/Kajaria) of colour and shade as approved by the Engineer-in-charge laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make (RAK/Johnson/Somany/Kajaria) of colour and shade as approved by the Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing and fixing gang saw cutthick mirror polished (Pre moulded & Pre polished)machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups, including rubbing, granite polishing, edge moulding, curing etc. complete. Granite 16 mm thick of colour & shade as approved by the Engineer-in-charge. |
| 26 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including primming coat with approved steel primerand then painting with synthetic enamal paint (two or more coats). Fixed to openings / wooden frames with rawl plugs etc., |
| 27 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 28 | Cement plaster 6mm to 10mm thick in a single coat with cement mortar 1:3 at all floors and locations for ceilings, soffits of exposed beams etc. finished perfectly smooth to correct lines, levels. Slopes, planes including preparing the surfaces, scaffolding, hacking the concrete surfaces, making of grooves as per Architectural drawings, curing etc. all as per specifications including Scaffolding etc complete. All work upto floor V level. |
| 29 | 10-15mm thick cement plaster 1:4 (1 cement: 4 coarse sand) in single coat on rough/fair side of single or half brick walls for exteriorplastering including scaffolding etc. complete. All work upto floor V level. |
| 30 | 10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on rough/fair side of single or half brick walls for interiorplastering including scaffolding etc. complete. All work upto floor V level. |
| 31 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm. All work upto floor V level. |
| 32 | Applyingwhite cement basedPutty of average thickness 1mm of approved brand & manufacture on wall surfaceto give an even finish (JK/Birla) |
| 33 | Distempering (two or more coats) with oil bound washable distemper of Asian / Nerolac / Berger brand and manufacture and of required shade on undecorated wall/ceiling/slopping surfaces to give an even shade including applying priming coat with cement primer. All work upto floor V level. |
| 34 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0 |
| 35 | Providing and laying APP (Atactic Poly Propylene Polymer ) modified prefabricated five layer water proofing membrane, black finishing reinforced with glass fibre mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mt. by the same membrane manufacture of density at 25°C, 0.87- 0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorized applicator of the manufacture of membrane.3 mm thick water proofing membrane with non-woven polyester matt:Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. |
| 36 | Providing gola(Angular Fillet) 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In75x75mm deep chase |
| 37 | Making khurras 45x45cm with average minimum thickness of 5 cmcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1mx 1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making the finishing outlet complete. |
| 38 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming toIS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diameter |
| 39 | Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 40 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 41 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete. 250 x 10 mm |
| 42 | -----------------do--------------------150 x 10 mm |
| 43 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete. 125 mm |
| 44 | ----------do------------------ 100 mm |
| 45 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm |
| 46 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolourandshadewith necessaryscrews etc. complete. |
| 47 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparentordyed to required colour and shadewithnecessary screws etc. complete. Twin rubber stopper |
| 48 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. Complete |
| 49 | SANITARY WORK Providing and fixing G.I. pipes (medium grades) complete with G.I. fitting and clamps, including cutting chases and making good the walls etc. Earthwork in trenches as required (Make Parkash Surya/Jindal). 15mm dia nominal bore |
| 50 | -------------do-----------------20 mm dia nominal bore |
| 51 | ------------do------------ 25 mm dia nominal bore |
| 52 | Providing and fixing ball valve (brass) of approved quality complete with handle. 20mm dia nominal bore |
| 53 | --------------do------------- 25 mm dia nominal bore |
| 54 | Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Make Star/Sintex/Lotus). |
| 55 | Providing and fixingun-plasticized Rigid PVCpipes 4 kg/cm2 pressureincluding all PVC fittings (bend, collar, tee, etc as requiredjointing with adhesive),conforming to IS: 13592 Type A including jointing with seal ring/ adhesive conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes (Uniplas/Supreme/Finolex make) Nothing extra shall be paid. 110 mm dia |
| 56 | ---------------do---------------- 75 mm dia |
| 57 | Providing and fixing un-plasticised -PVC pipe clips/ clamps of approved design to un-plasticised - PVCpipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia |
| 58 | ------------do--------------75 mm dia |
| 59 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design.All around P.V.Cpipe 110 mm / 75 mm nom dia. |
| 60 | Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) Complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 61 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:- With F.P.S. bricks with class designation 75Inside size 90x80cm and 60cm deep including fixing Angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required. |
| 62 | Providing and fixing of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nominal bore of approved quality. |
| 63 | Providing and fixing white vitrous china two piece wall hanging extended european seat with seat cover, & chinaware cisternHindware make size 620 x 355 x 745mmCat no 20096 (P-15) & 21056 /Cera Make ( Campbell) Size 655x365x755mm including rag bolts for wall hanging W.C complete. |
| 64 | Providing and fixing white vitrous Wash basin chinaware (Table top) Hindware makeCAT No.91041 of size 480 x 365x 135 / CERA make CAMPA size 550x400mm |
| 65 | Providing and fixing waste coupling 32 mm dia SS full thread Hindware make Cat no F-860010 /Jaquar make ALD-727 |
| 66 | Providing and fixing Bottle trap 32mm size Hindware makeCat no F-850015 /Jaquar make Cat No. ALD-769-L |
| 67 | Providing and fixing white vitreous china flat backfront urinal basin of sizes 370 x 390 x 600 mm Hindware makeCat no 60020with CP brass angle valve self closing systemHindware make Cat no F310003 ACP with CP standard flush pipe, complete job including painting of fittings and brackets if required, cutting and making good the walls and floors wherever required. |
| 68 | Providing and fixing white vitreous china urinal partition of size 690x165x325mm (Make Hindware Cat No: 61001/Cera equivalent) |
| 69 | Providing and fixing CP Angular stop cock with wall flange.Hindwate Makecat no : F340006 /Jaquar make ARI-39053. Size 15 mm nominal bore |
| 70 | Providing and fixing CP Brass bib cock with wall flange .Hindwate Makecat no : F340004 /Jaquar make ARI-39037. Size 15 mm nominal bore |
| 71 | Providing and fixing CP Brass bib cock with wall flange .Hindware Makecat no : F200003 /Jaquar make ARI-39037. Size 15 mm nominal bore |
| 72 | Providing and fixing concealed body for single lever washbasin wall mountedbasin tap including exposed part kit of single operating lever, wall flange, nipple and spout. Hindware Makecat no : F340022 & F860011. Size 15 mm nominal bore |
| 73 | Providing and fixing single towel bar / rail S.steel 600mm long Hindware Makecat no : F880005 /Jaquar make ACN-1111-SM |
| 74 | Providing and fixing toilet paper holder with cover Hindware Makecat no : F880003 / Jaquar Make ACN-1151-N |
| 75 | Providing and fixing Hand jet(health faucets ) for EWC ABS body with double lock 1.2 m SS flexible hose and wall hook Hindware Makecat no : F160001 |
| 76 | Providing and fixing Soap holder brass Hindware Makecat no : F160001 / Jaquar make ACN-1131-N |
| 77 | Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 78 | Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating (including the cost of floor trap) with or without vent arm complete including encasing the floor trap with cement concrete (1:2:4), 150 mm thick all around. 100mm inlet and 100 mm outlet |
| 79 | ---------------do------------ 100mm inlet and 75 mm outlet |
| 80 | P&F C.P Grating of 100mm dia of approved quality. |
| 81 | Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 20mm dia nominal bore |
| 82 | --------------do---------------25mm dia nominal bore |
| 83 | Providing and fixing G.I. Tank nipple size 1" to 2" for connection complete in all respects. |
| 84 | Providing and fixing Water motor 2 H.P (Crompton/Servo Make) |
| 85 | Providing and fixing of Check Valve for motor 32mm nominal bore of approved quality. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
