|
| 1 | Earth work in excavation in all kinds of soil bymechanical /manual means in trenches for foundation, etc., up to required width and depth including necessary ramming of bottom and dressing of sides, Close timbering, clearing of vegetation and mulba and disposal of excavated material as directed incl. all leads, lifts, carriages complete. |
| 2 | P/L, of stone soling 75 mm nominal size duly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading,cost and carriage of material involved complete. |
| 3 | P/L, in position cement concrete of specified grade excluding the cost of centering & shuttering. All work up to floor V-level in 1:4:8 (1 cement: 4 coarse, sand: 8 graded stone aggregate of 40 mm Nominal size (Crushed) all complete. |
| 4 | P/L, in positionreinforced cement concrete M20 of specified grade excluding the cost of centering & shuttering. finishing and reinforcement 1:1.5:3 upto Plinth Level(1cement: 1.5 coarse sand: 3 graded stone aggregate of 20 mm Nominal size Crushedall complete. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m complete. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. size)1:2:4(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete. |
| 7 | Reinforcement for R.C.C work incld straightening, cutting, bending, placing in position and binding all complete:-(Thermo Mechanically Treated Bars.). Incl cost of tar steel complete. Tar steel (TMT) shall be provided fromDivisional Store on existing stock rates. |
| 8 | Structural Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksas per the directions of Engineer Incharge.. |
| 9 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size nallah) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete. |
| 10 | Brick work with common burnt clay F.P.S.(non-modualar)bricks of class designation 75upto floor V-level in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)complete. |
| 11 | 12mm thick cement plaster in 1:6 mix (1 cement 6 sand) complete. |
| 12 | Providing & fixing of colour coated C.G.I sheet roofing 0.63mm thick incl. vertical curved surface fixed with nails, screws etc. including G.I limpet washer and over lapping of sheets complete in horizontal vertical trusses incl. cutting to size and shape wherever required. |
| 13 | Providing ridges or hips of width 60cm over all width colour coated G.S sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 0.63mm thick sheet with zinc coating not less than 275g/sqm.. |
| 14 | Supply,and laying of GSB/ nallah Muckincluding sorting, spreading to template, watering and call inclusive leads, lifts, loading, unloading carriage of materials from nearest source to site of work complete. Finished work to be measured. |
| 15 | Centering and shuttering incld. strutting ,propping etc. and removal of form work in foundation ,footings etc,incl. carriage complete. |
| 16 | Centering and shuttering incld. strutting ,propping etc. and removal of form work in Beamsincl. carriage complete. |
| 17 | Centering and shuttering incld. strutting ,propping etc. and removal of form work in Slab incl. carriage complete. |
| 18 | Providing and laying vetrified floor tiles ( 600mmx600mm) size with water absorption less than 0.08% and conforming IS: 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) incl. grouting the jointing wiht white cement and matching pigments etc. complete. |
| 19 | Providing and fixing 18mm thick gang saw cut mirrorpolished(pre andprepolished), machine cut granite forfloors, landings, pillars, dado, stairs, kitchen platform, vanity counterswindow sills faciasand similarlocationsof required size of approvedshade, colour and texturelaid over 20 mm thick base cement mortar1 :4 (1 cement:4 coarsesand)with jointstreatedwith white cement,mixed with matchingpigment,epoxy touch ups, includingrubbing, curing moulding and polishing to edge to give high gloss finishetc. completeat all levels. |
| 20 | Providing and applying of 2mm thick wall putty (Birla make) of approved make & manufacture including all leads and lifts complete. |
| 21 | Providing wood work in frames of windows, clerestory windows and other frames wrought framed and fixed in position incl. all leads, lifts, carriage etc complete(Imported wood). |
| 22 | Providing and fixing 35mm thick glazed shutters for windows and clerestory windows incl. 4mm thick float glass ISI marked black enameled M.S butt hinges with necessary screws including cost of glazing and necessary beading complete(Imported Kail wood) |
| 23 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of avg. width for aperture 1.4mm with wire of dia 0.63mm for doors, windows including ISI marked bright finished or black enameled M.S Butt hinges with necessary screws including cost of wire gauze and necessary beadings complete ( Imported Kail wood). |
| 24 | Providing and Fixing 35 mm thick panelled shutters for doors,including M.S butt hinges with necessary screws etc incl. cost of panelling and beading complete of(Imported kail wood) |
| 25 | Painting with synthetic enamel paint of approval brand and manufacture of required colour to give an even shade two or more coats. |
| 26 | Finishing walls with acrylic smooth Interior paint of required shade on new work (Two or more coats applied @1.67 litre/10sqm over and incl. base coat of water proofing cement [email protected]/10sqm). |
| 27 | Providing and fixing anodised almunium fittings of approved brand and manufacture. |
| 28 | Tower bolt 100mm. |
| 29 | Handles 100mm |
| 30 | Handles 150mm |
| 31 | L-Drops 300mm |
| 32 | Providing and fixing 1st quality ceramic wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dedos over 12mm thick bed of cement mortar 1:3 (1cement:3coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | Providing and fixing 1st quality ceramic glazedFloor tiles of minimum thickness 5mm of approved makeof required colour, pattern and size approved by Engineer in charge in skirting, risers of steps and dedos over 12mm thick bed of cement mortar 1:3 (1cement:3coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 34 | Construction of brick masonray man hole in cement mortor 1:4 mix (1 Cement 4 sand) aggregade 20mm nominal size foundation concrete 1:4:8 ( 1 Cement 4 cores sand 8 grade stone aggregate 40 mm nominal size)incld. side plastering 12mm thick in 1:4 mix with a finishing coat of neat cement slury completye as per standard disign with FPS bricks class designation( 600mm x600mm x450mm deep) incld.heavy duty CI Main hole frame with cover. |
| 35 | Providing and fixing of P.P.R 3 layer pipe in all P.P.R plain and brass threaded fittings incl. cost of fixing the pipes with clamps at 1.0 spacing incl. cost of cutting chases and making good the sameand testing of joints complete |
| 36 | 20mm dia nominal bore |
| 37 | 25mm dia nominal bore |
| 38 | 15mm dia nominal bore |
| 39 | Providing and fixing of PVC fittings for PVC pipesof approved quality and make( prince B type). |
| 40 | 100 mm dia |
| 41 | 75 mm dia |
| 42 | 50mm dia |
| 43 | Providing and fixing of C.P fittings of approved quality and brand with fixtures Pattern and design to be approved by Engineer incharge. |
| 44 | Bib Cock 15mm nominal bore |
| 45 | Sink Mixer |
| 46 | C.P Mixer |
| 47 | Angle Value |
| 48 | Wash Basin Mixer |
| 49 | Waste Pipe |
| 50 | C.P Grattings |
| 51 | Towel Rod |
| 52 | Soap Case |
| 53 | P/F of Rectanguler 600mmx450mm bevelled edge mirrors of superior glass of approved quality complete with 6mm hard board back fixed with C.P brass screws and washles complete |
| 54 | Providing and fixing water closet squatting pan (Indian type WC pan)of required standard quality Cera, Parrayware, Hindwarewith all fittings and fixtures complete including cutting and making good the walls and floors where ever required long pan pattern white vitreous china wc pan of size 580mm of ISI make. |
| 55 | P/L of Dry random rubblemasonry with hard stones in foundation and plinth from approved query stones uncoursed brought to course incl. all leads, lifts, cost and carriage of materials complete. |
| 56 | Providing and fixing 50 liter capacity water heater Gyser of approved brand of Venus/ Recold including its fixing at desired position complete in all respects. |
| 57 | P/L of counter made of 1:2:4 concrete 2\"-6\" wide, 2\"-9\" high incl. brick work in pillars 9\" wide incl. all carriage complete incl. cost of reinforcement complete. |
| 58 | P/F of stainless steel sink of approved quality and manufacture incl. all leads, lifts, carriage etc complete. |
| 59 | Providing and fixing wash basin with pedistal with C.I/MS brackets 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern including painting of fittings and brackets cutting and making good the wall where ever required white vitreous china wash basin size 630x450mm with a single hole 15mm brass pillar taps. |
| 60 | P/F of eves boarding of CR sheet 2mm thick of 300 mm width incl. frame work of 40x40x5mm incl. redoxide and scaffolding charges etc complete. |
| 61 | P/F of CR sheets of soffits of size 920mm wide incl. red-oxide, scaffolding and frame work of 35x35x5mm complete. |
| 62 | P/F of Gate Value of following nominals of approved brand and manufacture. |
| 63 | 25mm dia |
| 64 | 15mm dia |
| 65 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size.) |
| 66 | Making Plinth protection 75mm thick of cement concrete 1:3:6 (1 cement:3 course sand:6 graded stone agg. 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand incl. finishing the top smooth.(Crushed)incld. cost and carriage of all materials complete. |
| 67 | Providing and fixing of interlock tiles of approved brand and manufacture on a bed of50mm thick fine sand and necessary concreting on sides and edgesincl. cost and carriage of materials complete all inclusive. |
| 68 | Providing and fixing of PVC water storage tank of three thousand litres capacity each of approved brand and manufacture with its fittings leads, lifts, incl. necessary connection all complete incl. cost of ball cock. |
| 69 | Finishing walls with excel exterior paint of approved quality of required shade on new work (Two or more coats) applied @3.28 litre/10sqm over. |
| 70 | Shifting of existing structural stell shed incl. dismemberingand stacking material within lead of 50 Mtr. (Stacking material present in shed also lead upto 50 mtr) incl. all complete. |
| 71 | Providing and fixing 3.5 mm thick glass panes glazedwindows, clestory windowsincluding wooden beading of required size and section with necessary nails etc. complete. |
| 72 | Carriage of materials by mechaanical transport from source to site of work incl. loading and unloading complete. |
| 73 | Sand for an average lead of 20 Kms |
| 74 | Bricks for an average lead of 60 Kms |
