Name Of Work: Repair / Maintenance Of Various Items Of Furniture At Army Station Gwalior - 1.00 Chair Dinning Long Back : Fd-357 M & L For Carrying Out Repair / Replacement Of Following Parts Of Chair Dining Long Back As Per Drg After Dismantli, Garrison Engineer Gwalior-Madhya Pradesh

Name Of Work: Repair / Maintenance Of Various Items Of Furniture At Army Station Gwalior - 1.00 Chair Dinning Long Back : Fd-357 M & L For Carrying Out Repair / Replacement Of Following Parts Of Chair Dining Long Back As Per Drg After Dismantling The Old Parts Complete All As Specified & Directed By Engr-In Charge. 1.01 S & F Triangular Teak Stiffner 8 Nos. Of Size 60X60x25 Mm Shall Be Provided To Straighten Joint At Corner W / O Long With Other Members. 1.02 S & F Of 6Mm Thick Ply Wood Commercial At Back 1.03 S & F Teak Wood Sitffner 1.04 S & F Seat And Back Shall Be 50Mm Thick Synthetic Foam 40 Density Fixed Over Wooden Frame Covered With Leathered Rexine Of Approved By Ge. 1.05 Pvc Hard Shoes At The Bottom Of Legs As Specifed Be Fixed. 1.06 Polishing One Coat To Old And Two Coats To New Of Chair Dining After Repairs With French Polish Of Approved Make Including Preparation Of Surfaces. 2.00 Chair Cbt Steel With Arms / Without Arms : Fd-75 ( M ) 2.01 Dismantling, Taking Out Carefully Old Existing Seat Of Any Description & Replacement Of The Same With S&F New Seat Frame Made Out Of 1St Class Hardwood Tw Finished Complete All As On Drg, Specified & Directed By The Engr-In- Charge. 2.02 Replacement Of Back Of Chair Steel Cbt With S&F New Back Frame Made Out Of 1St Class Hw Tw Complete All As Shown On Drg Specified & Directed By The Engr-In- Charge. 2.03 Replacement Of Arms Rest With S&F New Arms Rest Made Out Of 1St Class Hw Tw Made To Shape And Fixed In Position With Suitable Steel Screws Complete All As Shown On Drgs Specified & Directed By The Engr-In- Charge. 2.04 Recanning Of Chair Seat And Back With 2Mm Wide New Plastic Cane In Godrej Pattern Complete All As Specified & Directed By Engr-In Charge. 2.05 Replacement Of Shoe / Cap With Steel Screws Where Required With S&F New Hard Pvc Rubber Shoe Of Superior Quality With Suitable Steel Screws Complete All As Shown On Drgs Specified & Directed By The Engr-In- Charge. 2.06 Preparation Of Existing Steel Surfaces Of The Frame Of Chair Cbt W / Arm And Spray Painting With One Coat Of Synthetic Enamel Paint With Ist Grade Quality Of Steel Frame And Two Coats With French Polish In Black Colour On New Seat & Back Frame Complete All As Specified & Directed By The Engr-In- Charge. 2.07 Preparation Of Existing Steel Surfaces Of Chair Cbt W / O Arm The Frame And Spray Painting With One Coat Of Synthetic Enamel Paint With Ist Grade Quality Of Steel Frame And Two Coats With French Polish In Black Colour On New Seat & Back Frame Complete All As Specified & Directed By The Engr-In- Charge. 3.00 Form Without Back :- Fd-77 ( M ) 3.01 Removing Of U / S Top From Its Existing Position And S&F New Top With 1St Class Hard Wood Tw Plank Wrought 25Mm Thick 255Mm Width & 1525 Mm Long Duly Fixed With Nuts And Bolts And Polished Complete All As Specified & Directed By Engr-In Charge. 3.02 Taking Out Old U / S Stiffener And S & F The New Stiffener And Complete All As Per Drg Specified & Directed By Engr-In-Charge. 3.03 Taking Out Old U / S Leg And S & F The New Leg And Complete All As Per Drg Specified & Directed By Engr-In-Charge. 3.04 S & F New Hard Rubber Toe Of High Quality Placed In Position As Shown In Drg, Specified & Directed By Engr-In-Charge. 3.05 Welding To Frames Wherever Cracked / Broken Complete All As Specified & Directed By Engr-In-Charge. 3.06 Preparation Of Old Painted Surface By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Black Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 4.00 Form With Back :- Fd-78 ( M ) 4.01 Removing Of U / S Top From Its Existing Position And S&F New Top With 1St Class Hard Wood Tw Plank Wrought 25Mm Thick 255Mm Width & 1800 Mm Long Duly Fixed With Nuts And Bolts And Polished All As Directed By Engr-In-Charge. 4.02 Removing Of U / S Back From Its Existing Position And S&F New Back With 1St Class Hard Wood Tw Plank Wrought 19Mm Thick 150Mm Width & 1800 Mm Long Duly Fixed With Nuts And Bolts And Polished All As Directed By Engr-In-Charge. 4.03 Taking Out Old U / S Stiffener And S & F The New Stiffener And Complete All As Per Drg, Specified & Directed By Engr-In-Charge. 4.04 Taking Out Old U / S Leg And S & F New Leg And Complete All As Per Drg, Specified & Directed By Engr-In-Charge. 4.05 S & F New Hard Rubber Toe Of High Quality Placed In Position As Shown In Drg, Specified & Directed By Engr-In-Charge. 4.06 Welding To Frames Wherever Cracked / Broken Complete All As Specified & Directed By Engr-In-Charge. 4.07 Preparation Of Old Painted Surface By Scrapping & Painting With 1St Quality Synthetic Enamel Paint Black Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 5.00 Mirror Dressing Gents ( Map ) : Fd / E6 / Map / 16 5.01 Replacement Of Back Frame With S&F New Back Frame Made Out Of 50Mm X 28Mm Teak Wood Members & 12Mm Thick Bwr Ply, Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 5.02 Replacement Of Mirror With S&F New Mirror Of Size 600Mm X 1200Mm X 5.5Mm Thick Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 5.03 5.5Mm Thick Glass Shelves Of Size 600Mm X100mm Made To Shape Fixed In Position, All As Shown On Drg, Specified & Directed By The Engr-In-Charge 5.04 French Polishing One Coat To Old Surfaces And Two Coats To New Surfaces Including Preparation Of Surfaces Complete All As Specified & Directed By Engr-In-Charge. 6.00 Kit Box Steel : Fd-98 ( M ) 6.01 Removing, Taking Out Carefully Old Existing Broken U / S Hasp Of The Box Kit Steel Of Any Description, In Any Position & Replacement Of The Same With S&F New Hasp Made Out Of Mild Steel Sheet On Box Kit Steel Made To Shape, Fixed In Position, All As Shown On Drgs Specified & Directed By The Engr-In- Charge. 6.02 Replacement Of Staples For Box Kit Steel With S&F New Staples Made Out Of 75Mm X 40Mm X 3Mm Thick Mild Steel Sheet Complete All As Shown On Drg, Specified & Directed By Engr-In Charge. 6.03 Replacement Of Hinges With S&F New Hinge As Per Drg, Specified & Directed By Engr-In Charge. 6.04 Dismantling, Taking Out Carefully Of Handle Sides & Front And S&F New Handle As Per Drg, Specified & Directed By Engr-In Charge. 6.05 Replacement Of Stay Pivots With S&F New Stay Pivot Made Out Of Mild Steel Sheet Complete All As Shown On Drg, Specified & Directed By Engr-In Charge. 6.06 Replacement Of Complete Top S&F New Complete Top Made Of 1.00Mm Thick Mild Steel Sheet Complete All As Per Shown On Drgs, Specified & Directed By Engr-In Charge. 6.07 Replacement Of Bottom With S & F New Complete Bottom Made Of 1.00 Mm Thick Mild Steel Sheet Complete All As Shown On Drgs, Specified & Directed By Engr-In Charge. 6.08 Welding To Frames Wherever Cracked / Broken Complete All As Specified & Directed By Engr-In Charge. 6.09 Preparation Of Existing Decorated Surfaces Of The Box Kit Steel Including Removing Of All Dents, Filling With Putty And Spray Painting With One Coat Of Synthetic Enamel Paint ( Ist Grade Quality ) Over Coat Of Red Oxide Primer ( External & Internal ) All As Indicated On Drgs, Complete All As Specified & Directed By Engr-In-Charge, Colour Shade As Approved By Ge. 7.00 Desk Fd-107, Fd-1021 7.01 S & F New Top As Per Drg, Specified & Directed By The Engr-In- Charge. 7.02 S & F New Bottom As Per Drg, Specified & Directed By The Engr-In- Charge. 7.03 S & F New Sides As Per Drg, Specified & Directed By The Engr-In- Charge. 7.04 S & F New Front As Per Drg, Specified & Directed By The Engr-In- Charge. 7.05 S & F New Leg As Per Drg, Specified & Directed By The Engr-In- Charge. 7.06 S & F New Stiffener As Per Drg, Specified & Directed By The Engr-In- Charge. 7.07 S & F New Foot Rest As Per Drg, Specified & Directed By The Engr-In- Charge. 7.08 Welding To Frames Wherever Cracked / Broken All As Specified & Directed By Engr-In-Charge. 7.09 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing Complete All As Shown On Drg, Specified & Directed By Engr-In-Charge. 7.10 Preparation Of Old Painted Surface By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Of Approved Color Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 8.00 Stool Dressing : Fd-27, Fd-252, Fd-282 8.01 Dismantling, Taking Out Carefully & Replacement Of Old Existing Broken Leg Of The Stool Dressing Of Sorts Of Any Description & Replacement Of The Same With S&F New Leg Of Ist Class Hard Wood ( Teak Wood ) Made To Shape, Fixed In Position All As Shown On Drg, Specified & Directed By The Engr-In-Charge. 8.02 Replacement Of Long Rail With S&F New Long Rail For Seat Made Out Of Ist Class Hard Wood ( Teakwood ) With Holes For Weaving. The Spacing Of Holes Shall Match With The Existing Rail On Other Side. Complete All As Shown On Drg, Specified & Directed By The Engr-In-Charge. 8.03 Replacement Of Short Rail With S&F New Short Rail Rail Made Out Of Ist Class Hard Wood ( Teak Wood ) With Holes For Cane Weaving. The Spacing Of Holes Shall Match With The Existing Rail On Other Side. Complete All As Shown On Drg, Specified & Directed By The Engr-In-Charge. 8.04 Taking Out Old U / S Stiffener And S & F The New Stiffener And Complete All As Per Drg Specified & Directed By Engr-In-Charge. 8.05 Recanning Of Stool Dressing With 2Mm Wide New Plastic Cane. Complete All As Shown On Drg, Specified & Directed By The Engr-In-Charge. 8.06 Replacement Of Rubber Shoe With S & F New Nylon Buffer Of Superior Quality With Steel Screws Of Size 20 Mm Long Complete As Approved And All As Shown On Drgs Specified & Directed By The Engr-In-Charge. 8.07 Polishing Two Coats Of Old And New Surfaces Of Stool Dressing After Repairs With French Polish Of Approved Make Including Preparation Of Surfaces. 9.00 Trestle Store Room Wooden : Fd-41, Fd-86 9.01 Removing / Taking Out Carefully Existing U / S Long Rail Made Out Of 1St Class Hard Wood Tw All As Shown On Drg Specified & Directed By The Engr-In-Charge. 9.02 Removing / Taking Out Carefully Existing U / S Centre Rail Made Out Of 1St Class Hard Wood Tw All As Shown On Drg Specified & Directed By The Engr-In-Charge. 9.03 Removing / Taking Out Carefully Existing U / S Short Rail Made Out Of 1St Class Hard Wood Tw All As Shown On Drg, Specified & Directed By The Engr-In-Charge. 9.04 Removing / Taking Out Carefully Existing U / S Leg Made Out Of 1St Class Hard Wood Tw All As Shown On Drg Specified & Directed By The Engr-In-Charge. 9.05 M & L For Two Coats Of Cerosote Oil To New Surfaces After Cleaning Of Tressle Store Room Wooden All As Per Drg & Directed By The Engr-In-Charge. 10.00 Wooden Desk School With Bench Type-B ( 960Mm X 450Mm X 620 Mm ) : Cwe / Bpl / Td / 53 / 98 10.01 Taking Out U / S / Decayed Top Of Desk From Its Existing Position And Provision Of New Top At The Same Position Made Of 1St Class Hw Complete All As Specified And Directed By The Engr-In-Charge. 10.02 Taking Out U / S / Decayed Top Plank Of Desk From Its Existing Position And Provision Of New Top Plank At The Same Position Made Of 1St Class Hw Complete All As Specified And Directed By The Engr-In-Charge. 10.03 Taking Out U / S / Decayed Legs Of Desk From Its Existing Position And Provision Of New Legs Of 1St Class Hw Complete All As Specified And Directed By The Engr-In-Charge. 10.04 Taking Out U / S / Decayed Long Rails Of Desk From Its Existing Position And Provision Of New Long Rails Of 1St Class Hw Complete As Specified And Directed By The Engr-In-Charge. 10.05 Taking Out U / S / Decayed Short Rails Of Desk From Its Existing Position And Provision Of New Short Rails Of 1St Class Hw Complete As Specified And Directed By The Engr-In-Charge. 10.06 Taking Out U / S / Decayed Seat Of Bench From Its Existing Position And Provision Of New Seat At The Same Position Made Of 1St Class Hw Complete All As Specified And Directed By The Engr-In-Charge. 10.07 Preparation Of Old Painted Surface Of Desk By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Brown Completed All As Per Drg & Specified & Directed By Engr-In-Charge. 10.08 Preparation Of Old Painted Surface Of Bench By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Brown Completed All As Per Drg & Specified & Directed By Engr-In-Charge. 11.00 Wooden Desk School With Bench Type-A ( 1120Mm X 450Mm X770 Mm ) : Cwe / Bpl / Td / 53 / 98 11.01 Taking Out U / S / Decayed Top Of Desk From Its Existing Position And Provision Of New Top At The Same Position Made Of 1St Class Hw Tw Complete All As Specified And Directed By The Engr-In-Charge. 11.02 Taking Out U / S / Decayed Top Plank Of Desk From Its Existing Position And Provision Of New Top Plank At The Same Position Made Of 1St Class Hw Complete All As Specified And Directed By The Engr-In-Charge. 11.03 Taking Out U / S / Decayed Legs Of Desk From Its Existing Position And Provision Of New Legs Of 1St Class Hw Tw Complete All As Specified And Directed By The Engr-In-Charge. 11.04 Taking Out U / S / Decayed Long Rails Of Desk From Its Existing Position And Provision Of New Long Rails Of 1St Class Hw Tw Complete As Specified And Directed By The Engr-In-Charge. 11.05 Taking Out U / S / Decayed Short Rails Of Desk From Its Existing Position And Provision Of New Short Rails Of 1St Class Hw Tw Complete As Specified And Directed By The Engr-In-Charge. 11.06 Taking Out U / S / Decayed Seat Of Bench From Its Existing Position And Provision Of New Seat At The Same Position Made Of 1St Class Hw Tw Complete All As Specified And Directed By The Engr-In-Charge. 11.07 Preparation Of Old Painted Surface Of Desk By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Brown Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 11.08 Preparation Of Old Painted Surface Of Bench By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Brown Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 12.00 Stool Steel 510Mm Fd-81, Fd-409 12.01 S & F New Top As Per Drg, Specified & Directed By The Engr-In- Charge. 12.02 S & F New Leg As Per Drg, Specified & Directed By The Engr-In- Charge. 12.03 S & F New Stiffener As Per Drg, Specified & Directed By The Engr-In- Charge. 12.04 Ms Sheet Triangular Piece For Bottom Of Legs As Per Drg, Specified & Directed By The Engr-In- Charge. 12.05 Welding To Frames Wherever Cracked / Broken All As Directed By The Engr-In- Charge. 12.06 Preparation Of Old Painted Surface Of Stool By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Of Approved Color Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 13.00 Stool Steel 760Mm Fd-81, Fd-409 13.01 S & F New Top As Per Drg, Specified & Directed By The Engr-In- Charge. 13.02 S & F New Leg As Per Drg, Specified & Directed By The Engr-In- Charge. 13.03 S & F New Stiffener As Per Drg, Specified & Directed By The Engr-In- Charge. 13.04 Ms Sheet Triangular Piece For Bottom Of Legs As Per Drg, Specified & Directed By The Engr-In- Charge. 13.05 Welding To Frames Wherever Cracked / Broken All As Directed By The Engr-In- Charge. 13.06 Preparation Of Old Painted Surface Of Stool By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Of Approved Color Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 14.00 Chair Cba Spl With Hand Rest Fd-120 ( M ) 14.01 S & F New Wooden Back Frame As Per Drg, Specified & Directed By The Engr-In- Charge. 14.02 S & F New Wooden Seat Frame Per Drg, Specified & Directed By The Engr-In- Charge. 14.03 S & F New Leg As Per Drg, Specified & Directed By The Engr-In- Charge. 14.04 S & F New Handrest As Per Drg, Specified & Directed By The Engr-In- Charge. 14.05 Recanning Of Back & Seat With 2Mm Wide New Plastic Cane. As Per Drg, Specified & Directed By The Engr-In- Charge. 14.06 Welding To Frames Wherever Cracked / Broken All As Directed By The Engr-In- Charge. 14.07 S & F New Hard Pvc / Rubber Shoe / Ring Of Superior Quality With Suitable Screws For Fixing Complete All As Shown On Drg, Specified & Directed By The Eic / Ge. 14.08 French Polishing One Coat To Old Surfaces And Two Coats To New Surfaces Including Preparation Of Surfaces Complete All As Per Drg, Specified & Directed By Engr-In-Charge. 14.09 Preparation Of Old Painted Surface By Scrapping And Painting With 1St Quality Synthetic Enamel Paint Of Approved Color Completed All As Per Drg, Specified & Directed By Engr-In-Charge. 15.00 Receptacle W / Bucket Fd-43 ( M ) , Fd-368, Fd-1044 15.01 S & F New Bottom Of Bucket As Per Drg, Specified & Directed By The Eic / Ge. 15.02 S & F New Handle Of Bucket As Per Drg, Specified & Directed By The Eic / Ge. 15.03 S & F New Top Of Receptacle As Per Drg, Specified & Directed By The Eic / Ge. 15.04 S & F New Bottom Of Receptacle As Per Drg, Specified & Directed By The Eic / Ge. 15.05 S & F New Vertical Lever And Horizontal Lever With Foot Rest Of Receptacle As Per Drg, Specified & Directed By The Engr-In- Charge. 15.06 Welding To Frames Wherever Cracked / Broken All As Directed By The Eic / Ge. 16.00 Cushions Of Sofa Set : Fd-281, 373, Fd-258, Fd / Map-Ii / 02: 16.01 Supply Of New Cushion For Sofa Single / Three Seater Made Of 100 Mm Thick U Foam, 40 Density, Isi Marked Covered With Best Quality Tapestry Cloth ( Make Of Cloth: Bombay Dyeing, Ddecor ) Of Approved Colour ( Not Less Than Rs. 300 / - Per Rm ) Duly Wraped With Long Cloth Of Existing Pattern And As Per Drgs And Directed By Ge / Eic. ( Make Of Foam Cushion:Sleepwell / Springwell / Kurlon ) . 17.00 Chair Verandah:- Fd / Map-Ii / 06 17.01 Removing The Existing U / S Broken Pvc Seat And Back From The Chair Verandah Map, S & F New Pvc Seat And Back 4Mm Thick To The Chair After Providing Flat Iron 20Mmx4mm Support In Centre Of Seat Only By Proper Welding For Support Of Pvc Seat After Applying One Coat Of Primer And Two Coats Of Synthetic Enamel Paint White Color To The Flat Iron. The Pvc Seat Shall Got Approved From Ge Before Supply. Make Of Pvc Seat –Amko / Comfo / Harmony. Complete As Per Drg, Specified & Directed By The Engr-In- Charge. 18.00 Chair Dining ( Jco / Ors ) : Fd / Map-Ii / 05 18.01 Removing Of Old U / S / Broken Pvc Seat From Chair And S & F New Pvc Seat 4Mm Thick In Single Piece All As Per Shape And Size Shown On Drg And As Directed By The Engr-In- Charge.

INR 500 /-

INR 96000.0 /-

INR 48 Lakhs /-

Name of Work: REPAIR/MAINTENANCE OF VARIOUS ITEMS OF FURNITURE AT ARMY STATION GWALIOR

Sl. No.	Item Description
1	CHAIR DINNING LONG BACK : FD-357 M & L for carrying out repair/ replacement of following parts of Chair dining long backas per drg after dismantling the old parts complete all as specified & directed by Engr-in Charge.
2	S & F triangular Teak stiffner 8 Nos. of size 60x60x25 mm shall be provided to straighten joint at corner w/o long with other members.
3	S & F of 6mm thick ply wood commercial at back
4	S & F teak wood sitffner
5	S & F seat and back shall be 50mm thick synthetic foam 40 density fixed over wooden frame covered with leathered rexine of approved by GE.
6	PVC hard shoes at the bottom of legs as specifed be fixed.
7	Polishing one coat to old and two coats to new of chair dining after repairs with french polish of approved Make including preparation of surfaces.
8	CHAIR CBT STEEL WITH ARMS/ WITHOUT ARMS : FD-75 (M)
9	Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seat frame made out of 1st class hardwood TW finished complete all as on drg, specified & directed by the Engr-in- Charge.
10	Replacement of back of chair steel CBT with S&F new back frame made out of 1st class HW TW complete all as shown on drg specified & directed by the Engr-in- Charge.
11	Replacement of Arms rest with S&F new Arms rest made out of 1st class HW TW made to shape and fixed in position with suitable steel screws complete all as shown on drgs specified & directed by the Engr-in- Charge.
12	Recanning of chair seat and back with 2mm wide new plastic cane in godrej pattern complete all as specified & directed by Engr-in Charge.
13	Replacement of shoe/Cap with steel screws where required with S&F new hard PVC rubber shoe of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge.
14	Preparation of existing steel surfaces of the frame of chair CBT w/arm and spray painting with one coat of synthetic enamel paint with Ist grade quality of steel frame and two coats with french polish in black colour on new seat & back frame complete all as specified & directed by the Engr-in- Charge.
15	Preparation of existing steel surfaces of chair CBT w/o arm the frame and spray painting with one coat of synthetic enamel paint with Ist grade quality of steel frame and two coats with french polish in black colour on new seat & back frame complete all as specified & directed by the Engr-in- Charge.
16	FORM WITHOUT BACK :-FD-77(M)
17	Removing of U/S top from its existing position and S&F new top with 1st class hard wood TW plank wrought 25mm thick 255mm width & 1525 mm long duly fixed with nuts and bolts and polished complete all as specified & directed by Engr-in Charge.
18	Taking out old U/S Stiffener and S & F the new Stiffener and complete all as per drg specified & directed by Engr-in-Charge.
19	Taking out old U/S Leg and S & F the new Leg and complete all as per drg specified & directed by Engr-in-Charge.
20	S & F new Hard Rubber Toe of high quality placed in position as shown in drg, specified & directed by Engr-in-Charge.
21	Welding to frames wherever cracked/broken complete all as specified & directed by Engr-in-Charge.
22	Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint black completed all as per drg, specified & directed by Engr-in-Charge.
23	FORM WITH BACK :-FD-78(M)
24	Removing of U/S top from its existing position and S&F new top with 1st class hard wood TW plank wrought 25mm thick 255mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed by Engr-in-Charge.
25	Removing of U/S back from its existing position and S&F new back with 1st class hard wood TW plank wrought 19mm thick 150mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed by Engr-in-Charge.
26	Taking out old U/S Stiffener and S & F the new Stiffener and complete all as per drg, specified & directed by Engr-in-Charge.
27	Taking out old U/S Leg and S & F new Leg and complete all as per drg, specified & directed by Engr-in-Charge.
28	S & F new Hard Rubber Toe of high quality placed in position as shown in drg, specified & directed by Engr-in-Charge.
29	Welding to frames wherever cracked/broken complete all as specified & directed by Engr-in-Charge.
30	Preparation of old painted surface by scrapping & painting with 1st quality synthetic enamel paint black completed all as per drg, specified & directed by Engr-in-Charge.
31	MIRROR DRESSING GENTS (MAP) : FD/E6/MAP/16
32	Replacement of back frame with S&F new back frame made out of 50mm x 28mm teakwood members & 12mm thick BWR Ply, made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
33	Replacement of mirror with S&F new mirror of size 600mm x 1200mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
34	5.5mm thick glass shelves of size 600mm x100mm made to shape fixed in position, all as shown on drg, specified & directed by the Engr-in-Charge
35	french Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces complete all as specified & directed by Engr-in-Charge.
36	KIT BOX STEEL : FD-98(M)
37	Removing, taking out carefully old existing broken U/S Hasp of the Box Kit Steel of any description, in any position & replacement of the same with S&F new Hasp made out of mild steel sheet on Box Kit Steel made to shape, fixed in position, all as shown on drgs specified & directed by the Engr-in- Charge.
38	Replacement of staples for box kit steel with S&F new staples made out of 75mm x 40mm x 3mm thick mild steel sheet complete all as shown on drg, specified & directed by Engr-in Charge.
39	Replacement of Hinges with S&F new hinge as per drg, specified & directed by Engr-in Charge.
40	Dismantling, taking out carefully of handle sides & front and S&F new handle as per drg, specified & directed by Engr-in Charge.
41	Replacement of stay pivots with S&F new stay pivot made out of mild steel sheet complete all as shown on drg, specified & directed by Engr-in Charge.
42	Replacement of complete Top S&F new complete Top made of 1.00mm thick mild steel sheet complete all as per shown on drgs, specified & directed by Engr-in Charge.
43	Replacement of bottom with S & F new complete bottom made of 1.00 mm thick mild steel sheet complete all as shown on drgs, specified & directed by Engr-in Charge.
44	Welding to frames wherever cracked/broken complete all as specified & directed by Engr-in Charge.
45	Preparation of existing decorated surfaces of the box kit steel including removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint (Ist grade quality) over coat of red oxide Primer (External & Internal ) all as indicated on drgs, complete all as specified & directed by Engr-in-Charge, colour shade as approved by GE.
46	DESK FD-107, FD-1021
47	S & F new Top as per drg, specified & directed by the Engr-in- Charge.
48	S & F new bottom as per drg, specified & directed by the Engr-in- Charge.
49	S & F new sides as per drg, specified & directed by the Engr-in- Charge.
50	S & F new front as per drg, specified & directed by the Engr-in- Charge.
51	S & F new leg as per drg, specified & directed by the Engr-in- Charge.
52	S & F new stiffener as per drg, specified & directed by the Engr-in- Charge.
53	S & F new foot rest as per drg, specified & directed by the Engr-in- Charge.
54	Welding to frames wherever cracked/broken all as specified & directed by Engr-in-Charge.
55	S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified & directed by Engr-in-Charge.
56	Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint of approved color completed all as per drg, specified & directed by Engr-in-Charge.
57	STOOL DRESSING : FD-27, FD-252, FD-282
58	Dismantling, taking out carefully & replacement of old existing broken leg of the stool dressing of sorts of any description & replacement of the same with S&F new leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drg, specified & directed by the Engr-in-Charge.
59	Replacement of long rail with S&F new long rail for seat made out of Ist class hard wood (teakwood) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as shown on drg, specified & directed by the Engr-in-Charge.
60	Replacement of short rail with S&F new short rail rail made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. Complete all as shown on drg, specified & directed by the Engr-in-Charge.
61	Taking out old U/S Stiffener and S & F the new Stiffener and complete all as per drg specified & directed by Engr-in-Charge.
62	Recanning of stool dressing with 2mm wide new plastic cane. Complete all as shown on drg, specified & directed by the Engr-in-Charge.
63	Replacement of rubber shoe with S & F new Nylon Buffer of superior quality with steel screws of size 20 mm long complete as approved and all as shown on drgsspecified & directed by the Engr-in-Charge.
64	Polishing two coats of old and new surfaces of stool dressingafter repairs with french polish of approved Make including preparation of surfaces.
65	TRESTLE STORE ROOM WOODEN : FD-41, FD-86
66	Removing /taking out carefully existing U/S Long rail made out of 1st classhard wood TW all as shown on drg specified & directed by the Engr-in-Charge.
67	Removing /taking out carefully existing U/S Centre rail made out of 1st classhard wood TW all as shown on drg specified & directed by the Engr-in-Charge.
68	Removing /taking out carefully existing U/S Short rail made out of 1st classhard wood TW all as shown on drg, specified & directed by the Engr-in-Charge.
69	Removing /taking out carefully existing U/S Leg made out of 1st class hard wood TW all as shown on drg specified & directed by the Engr-in-Charge.
70	M & L for two coats of cerosote oil to new surfaces after cleaning of tressle Store Room wooden all as per drg & directed by the Engr-in-Charge.
71	WOODEN DESK SCHOOL WITH BENCH TYPE-B (960mm X 450mm X 620 mm) : CWE/BPL/TD/53/98
72	Taking out U/S/decayed top of Desk from its existing position and provision of new top at the same position made of 1st class HW complete all as specified and directed by the Engr-in-Charge.
73	Taking out U/S/decayed top plank of Desk from its existing position and provision of new top plank at the same position made of 1st class HW complete all as specified and directed by the Engr-in-Charge.
74	Taking out U/S/decayed legs of Desk from its existing position and provision of new legs of 1st class HW complete all as specified and directed by the Engr-in-Charge.
75	Taking out U/S/decayed long rails of Desk from its existing position and provision of new long rails of 1st class HW complete as specified and directed by the Engr-in-Charge.
76	Taking out U/S/decayed short rails of Desk from its existing position and provision of new short rails of 1st class HW complete as specified and directed by the Engr-in-Charge.
77	Taking out U/S/decayed seat of Bench from its existing position and provision of new seat at the same position made of 1st class HW complete all as specified and directed by the Engr-in-Charge.
78	Preparation of old painted surface of Desk by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg & specified & directed by Engr-in-Charge.
79	Preparation of old painted surface of Bench by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg & specified & directed by Engr-in-Charge.
80	WOODEN DESK SCHOOL WITH BENCH TYPE-A (1120mm X 450mm X770 mm) : CWE/BPL/TD/53/98
81	Taking out U/S/decayed top of Desk from its existing position and provision of new top at the same position made of 1st class HW TW complete all as specified and directed by the Engr-in-Charge.
82	Taking out U/S/decayed top plank of Desk from its existing position and provision of new top plank at the same position made of 1st class HW complete all as specified and directed by the Engr-in-Charge.
83	Taking out U/S/decayed legs of Desk from its existing position and provision of new legs of 1st class HW TW complete all as specified and directed by the Engr-in-Charge.
84	Taking out U/S/decayed long rails of Desk from its existing position and provision of new long rails of 1st class HW TW complete as specified and directed by the Engr-in-Charge.
85	Taking out U/S/decayed short rails of Desk from its existing position and provision of new short rails of 1st class HW TW complete as specified and directed by the Engr-in-Charge.
86	Taking out U/S/decayed seat of Bench from its existing position and provision of new seat at the same position made of 1st class HW TW complete all as specified and directed by the Engr-in-Charge.
87	Preparation of old painted surface of Desk by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg, specified & directed by Engr-in-Charge.
88	Preparation of old painted surface of Bench by scrapping and painting with 1st quality synthetic enamel paint brown completed all as per drg, specified & directed by Engr-in-Charge.
89	STOOL STEEL 510MM FD-81, FD-409
90	S & F new Top as per drg, specified & directed by the Engr-in- Charge.
91	S & F new leg as per drg, specified & directed by the Engr-in- Charge.
92	S & F new stiffener as per drg, specified & directed by the Engr-in- Charge.
93	MS Sheet triangular piece for bottom of legs as per drg, specified & directed by the Engr-in- Charge.
94	Welding to frames wherever cracked/broken all as directedby the Engr-in- Charge.
95	Preparation of old painted surface of stool by scrapping and painting with 1st quality synthetic enamel paint of approved color completed all as per drg, specified & directed by Engr-in-Charge.
96	STOOL STEEL 760mm FD-81, FD-409
97	S & F new Top as per drg, specified & directed by the Engr-in- Charge.
98	S & F new leg as per drg, specified & directed by the Engr-in- Charge.
99	S & F new stiffener as per drg, specified & directed by the Engr-in- Charge.
100	MS Sheet triangular piece for bottom of legs as per drg, specified & directed by the Engr-in- Charge.
101	Welding to frames wherever cracked/broken all as directed by the Engr-in- Charge.
102	Preparation of old painted surface of stool by scrapping and painting with 1st quality synthetic enamel paint of approved color completed all as per drg, specified & directed by Engr-in-Charge.
103	CHAIR CBA SPL WITH HAND REST FD-120(M)
104	S & F new wooden Back frame as per drg, specified & directed by the Engr-in- Charge.
105	S & F new wooden Seat frame per drg, specified & directed by the Engr-in- Charge.
106	S & F new leg as per drg, specified & directed by the Engr-in- Charge.
107	S & F new handrest as per drg, specified & directed by the Engr-in- Charge.
108	Recanning of back & seat with 2mm wide new plastic cane. as per drg, specified & directed by the Engr-in- Charge.
109	Welding to frames wherever cracked/broken all as directed by the Engr-in- Charge.
110	S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified & directed by the EIC/GE.
111	French Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces complete all as per drg, specified & directed by Engr-in-Charge.
112	Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint of approved color completed all as per drg, specified & directed by Engr-in-Charge.
113	RECEPTACLE W/BUCKET FD-43(M), FD-368, FD-1044
114	S & F new bottom of bucket as per drg, specified & directed by the EIC/GE.
115	S & F new handle of bucket as per drg, specified & directed by the EIC/GE.
116	S & F new top of receptacle as per drg, specified & directed by the EIC/GE.
117	S & F new bottom of receptacle as per drg, specified & directed by the EIC/GE.
118	S & F new vertical lever and horizontal lever with foot rest of receptacle as per drg, specified & directed by the Engr-in- Charge.
119	Welding to frames wherever cracked/broken all as directed by the EIC/GE.
120	CUSHIONS OF SOFA SET : FD-281,373, FD-258, FD/MAP-II/02:
121	Supply of new cushion for Sofa single/threeseatermade of 100 mm thick "U" foam, 40 density, ISI marked covered with best quality tapestry cloth (Make of Cloth: Bombay dyeing, D"decor) of approved colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern and as per drgs and directed by GE/EIC. (Make of Foam Cushion:Sleepwell/ Springwell/Kurlon).
122	CHAIR VERANDAH:- FD/MAP-II/06
123	Removing the existing U/S broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thickto the chair after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat after applying one coat of primer and two coats of synthetic enamel paint white color to the flat iron. The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY. complete as per drg, specified & directed by the Engr-in- Charge.
124	CHAIR DINING (JCO/ORS) : FD/MAP-II/05
125	Removing of old U/S/broken PVC seat from chair and S & F new PVC seat 4mm thick in single piece all as per shape and size shown on drg and as directed by the Engr-in- Charge.