Construction Of E Disha Building In The Campus Of Mini Sectt At Kaithal Pdg Wooden Partition Construction Of E Disha Building In The Campus Of Mini Sectt At Kaithal Pdg Wooden Partition, Kaithal-Haryana
TDR : 29535601
Tender Notice
BOQ
Expired
Kaithal
Haryana
Construction Of E Disha Building In The Campus Of Mini Sectt At Kaithal Pdg Wooden Partition Construction Of E Disha Building In The Campus Of Mini Sectt At Kaithal Pdg Wooden Partition
Name of Work:Construction of E-Disha building in the Campus of Mini Sectt. at Kaithal (Pdg. wooden partition)
Sl. No.
Item Description
1
Providing and fixing frame work for partitions/ wall lining etc. made of kg 50x50x1 .6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. (HSR 12.156)
2
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately). Sal wood (HSR12.1.2)
3
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick (HSR 12.26.1)
4
Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.(i) 1.5 mm thick(HSR 12.12.1)
5
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) (HSR 12.177.1)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
