Military Engineer Services-MES has published Repair To Flooring Roofing Ceiling Plumbing Joinery And Misc B R Works In 6 Mech Location And Adjoining Areas Under Age B R Ii At Mil Stn Patiala Repair To Flooring Roofing Ceiling Plumbing Joinery And Misc B R Works In 6 Mech Location And Adjoining A. Submission Date for this Tender is 20-10-2021. Building Work Tenders in PATIALA Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 2 | M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including finishing smooth and even applying wall care putty and applying a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 4 | M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer"s instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cementcomplete all as specified and directed. Note : WPC will be measured and paid separately. |
| 5 | Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika |
| 6 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including finishing smooth and even applying wall care putty and applying a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 7 | M&L for 01 one costs of exterior emulsion paint (light shade) @ 10Sqm/litre/1 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 8 | M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including finishing smooth and even applying wall care putty and applying a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 10 | M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices by filling wall putty in depressions, sand papering etc and making the surface smooth and applying one coat of exterior emulsion paint @ 10 sq.m/kg/1 coat by using following brands of emulsion by roller complete all as specified & as directed by Engineer-in-Charge. |
| 11 | M & L for preparing existing treated surfaces on walls by filling wall putty in depressions, sand papering etc and making the surface smooth and applying 01 coats of interior emulsion paint (light shade) @ 20 sq.m/litre/1 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 12 | M & L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed. |
| 13 | M & L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed. |
| 14 | Complete removal of existing treatment of any type/description such as cement base paint, external emulsion,internal emulsion etc fromsurfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed. |
| 15 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed. |
| 16 | M&L Brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed. |
| 17 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed. |
| 18 | Demolition of cement concreteun-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed. |
| 19 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 20 | M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick,set and jointed in cement slurry including border of 100mm wide baroda green/white mable as per pattern approved over & including screedof 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform. |
| 21 | M&L for machine cut kota stone slabas in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screedof 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed. |
| 22 | M&L for Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 23 | M&L for Providing and Laying Premium (1st) quality straight edge, ceramic tiles in 300x300x6 to 7 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & incl and over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed. Make:- Johnson (Digital HD Tiles) (Barstow for Toilets & Verona for Kitchens) or equivalent from Kajaria/Somany as approved by AO |
| 24 | M&L for single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 25 | M&L for single charge,Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light & dark tiles as approved,on vertical surfaces such as in skirting/dado etc ,length of each unit not less than 600 mm and height not more than 150mm, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.mover & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 26 | S&F Vitreous china wash hand basin white flat back size 550 x 400mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,32mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 complete all as specified and directed. |
| 27 | M&L for baroda green marble machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed. |
| 28 | M&L for Form work tosoffits of suspended slabs such as roof slabs not exc 200mm thick horizontal for flat roofs complete all as specified and directed. |
| 29 | S&F Pillar tap cast copper alloy, CP, with capsten head 15mm bore, screwed down high pressure, long screw shanks and fly nuts, screw for iron pipe fixed in repair complete all as specified and directed. |
| 30 | S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed. |
| 31 | S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete all as specified and directed. |
| 32 | S/F vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white with grating & union for discrage pipe excluding flushing cistern, flush pipe & waste pipe complete all as specified and directed. |
| 33 | S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed. |
| 34 | S&F Brass chromium plated spray jet with flexible pipe 1.50 m long with bass nut/union fixed to EWC suitable for 15 mm bore of pipe fixed in repairs complete all as specified and directed. |
| 35 | S&F Bib taps,CP,fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and directed. |
| 36 | S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and directed. |
| 37 | S&F Angular Stop Cock,CP,fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. |
| 38 | S&F CP trap gratings size 100mm dia complete all as specified and directed. |
| 39 | S&F in repairs stainless steel soap dish approx size 100x80mm fixed to walls of approved make complete all as specified and directed. |
| 40 | S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finishcomplete fixed in position all as specified and directed. Make : Modi/Atul/Prayag |
| 41 | S&F PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified. |
| 42 | M&L cast iron nahani/floor/multifloor trap 100mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 43 | S&F cast iron junction combination "T" equal or unequalfor 100mm bore with access door as in repair complete all as specified. |
| 44 | S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100 mm bore in repair complete all as specified and directed. |
| 45 | S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm bore in repair complete all as specified and directed. |
| 46 | S&F CI bend (any radius)of100 mm bore in repair complete all as specified and directed. |
| 47 | S&F CI bend (any radius)of75 mm bore in repair complete all as specified and directed. |
| 48 | S&F CI bend (any radius) with oval access door of 75 mm bore in repair complete all as specified and directed. |
| 49 | S&F CI cowel 100 mm dia complete all as specified and directed. |
| 50 | S&F CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches of 100mm dia fixed in cement jointcoplete all as specified and directed. |
| 51 | S&F Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type "P" or "S" incl CI grating fixed in repair complete all as directed and specified. |
| 52 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exceeding 1.50 Mtr in depth and getting out in soft/loose soil complete all as specified and directed. |
| 53 | All as per Serial items No. 53 herein before but exceeding 1.5 Mtr and not exceeding 3.00 Mtr depth complete all as specified and directed. Note :- The rate quoted should include provision of oxygen cylinder , safety belts and helmet in case of deep earth work as and when necessary. |
| 54 | M&L fpr Cement plaster 15mm thick on fair faces of brick wk in cement mortar 1:4 and finished even and smooth without using extra cement with/without WPC complete all as specified and directed. (WPC where required shall be measured and paid separately) |
| 55 | M&L for preparing new plasteredsurfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 56 | M&L for Providing, precast cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as inwindow or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. complete all as specified and directed. |
| 57 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 58 | M&L for Reinforced concrete pipes of 150mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge. |
| 59 | M&L for Reinforced concrete pipes of 200 mmdia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed. |
| 60 | M&L for Hard core of broken stones or boulders of gauge n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface complete all as specified and directed. |
| 61 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 62 | M&L for PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 63 | M&L for RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and set in CM1:6 incl necessary from work hand placing of manhole cover on varsion complete all as specified and directed. |
| 64 | M&L for TMT bars 8mm dia and over cut to length bent to shape required incl cranking bending, spirally , hooking ends and binding with mild steel wire not less than 0.9mm dia (annealed) complete all as specified and as directed. (Note : The payment shall be made only after placing of cover on manholes) |
| 65 | Returning and filling incl spreading, levelling, water and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 66 | Removal of excavated material n. exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 67 | M&L for Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 mix type B-1smooth finished and reforming benching as required of 150mm dia of pipe complete all as specified and directed. |
| 68 | Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified. |
| 69 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. |
| 70 | Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified. |
| 71 | S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified. |
| 72 | S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as directed and specified. |
| 73 | Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified and directed. |
| 74 | S&FRoof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including etc and like similar items including welding/fixed with conn plates etc. complete all as specified and directed. |
| 75 | M & L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make : Asian Paints/Berger/Nerolac |
| 76 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note : Fixing of sheets will be done strictly according as per manufacurer"s instructions. Make : Tata Bluescope or equivalent as approved by AO |
| 77 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 78 | Dismantlingwall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 79 | S & F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section(not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm of approved design of make Acoster/Ploca/ Armstrong or equivalent as approved by GE all as specified & directed. |
| 80 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and as directed. |
| 81 | Demolition of mud phuska on roof any thickness complete all as specified and as directed. |
| 82 | M & L for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. |
| 83 | M & L for PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed. |
| 84 | M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 85 | Providing and laying3mm thick APP (Atactic Polyproplene Polymer) modifiedprefabricated five layer, weightnot less than 3.60 Kg/Sqm water proofingmembrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the samemembrane manufacturer ofdensity 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling alljoints etc after the surface complete as per standard practice as per manufacturers instructions.The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms(ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/.Softening point of membrane not less than 150 degreeC Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) Thelaying of membrane shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 86 | S&F laying factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mmx 22mm, machine pressed, as on roof surface, confirming to IS : 1237-1980, laid over and including 15mm thick screed bed in Cm 1:4, set jointed and pointed with grey cement slurry complete all as specified and directed. |
| 87 | S&F 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls in repairs complete all as specified and directed. |
| 88 | S&F 150mm bore PVC (SWR) bends any radius in repairs complete all as specified. |
| 89 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed in repairs complete all as specified and directed. |
| 90 | S&F Sheet glass 4mm thick, selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each paneincluding preparing and dismantling of broken glass complete all as specified and directed. |
| 91 | S&F Figured / pin headed glass 4mm thick ang glazing with oil putty or wooden beads in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 92 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed as in repairs complete all as specified and directed. |
| 93 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 94 | S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 95 | S&F factory madeflush door shutter 35mm thick, ISI marked conforming to IS : 2202 (part-I) non -decorative type, core of block board construction with frame of 1st class hard wood & well matched commercal 3 ply veneering with vertical grains or cross band & face veneers on both faces of shutters.including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per door. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per door (e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos. per leaf |
| 96 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per door. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm- 1 No per leaf |
| 97 | M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make : Asian Paints/Berger/Nerolac |
| 98 | M&L cementconcrete 1:3:6 type C-0 using 12.50mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. |
| 99 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 100 | M & L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with 5mm x 15mm widePVC sheet beading used inside stiles and decorative VC beadingof 10mm x 10mm (90) on exposed side of shutter complete all as specified and directed. |
| 101 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 102 | S&F 100 mm size PVC butt hingescomplete all as specified and directed. (Make :PRAYAG/POLYTUF/POLYTUF/ Raj shree) |
| 103 | S&F 150MM PVC handlescomplete all as specified and directed. (Make :PRAYAG/POLYTUF/POLYTUF/ Raj shree) |
| 104 | S&F 200mm long PVC tower bolt complete all as specified and directed. (Make :PRAYAG/POLYTUF/POLYTUF/ Raj shree) |
| 105 | Taking down Shutters of any description n exc 1 sq. m but not exc 2 sqm each and refixing in the same opening all as specified and directed. |
| 106 | S&F stainless steel curtain rod 25mm bore min thickness 1mm incl stainless steel brackets/supports/end stops etc complete fixed in position complete all as specified and directed. |
| 107 | S&F Steel window box type using ERW hollow "P" section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick,jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-191(R) sheet 1/4 to 4/4 complete all as specified and directed. |
| 108 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 109 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 110 | Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 111 | M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed. |
| 112 | M & L Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping and the like includingfor use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
