Military Engineer Services-MES has published Repair And Maint Of Roofing Flooring Internal Water Supply Wooden And Steel Joinery Etc Including Cleaning Of Sewage Lines Septic Tanks And Manholes Etc At Tattoo Ground Under Ge 970 Ews Repair And Maint Of Roofing Flooring Internal Water Supply Wooden An. Submission Date for this Tender is 02-11-2021. Shed Construction Tenders in GE970EWS C/O56APO Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-11-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar patternroof coverings complete all as specified and directed. |
| 2 | S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with "L" or "J" type or crancked hook bolts and washers in roofs, walls etc in patches complete all as specified and directed. |
| 3 | All as per item No 02 but exceptsheeting (any thickness) complete all as specified and directed. |
| 4 | S&FPre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 5 | All as per item No 4 but exceptsheeting (any thickness) complete all as specified and directed by engineer in charge. |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed |
| 7 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 8 | M&L for preparation of old painted steel surface of any description exc. 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 9 | Demolition of PCC ground floor and paving n.exc 15cm thickness unreinforced (below or above ground level) all as specified and directed |
| 10 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M&L 25 mm thick cement concrete type B-1 1;2;4(using20 mm graded stone aggragate) in sub base complete all as specified and as directed |
| 12 | M&L for Non skid ceramic coloured tiles jointless, 7-8 mm thick (area exc 0.11 Sqm but not exc 0.18 Sqm) laid in floors with neat cement slurry including poinintg in white cement with pigment to match the shade of tiles incl and over 15mm thick screed bed or beding layer in cement mortor 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premisescomplete all as specified and directed. |
| 13 | M&L Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/reactangular) area of each tile exc0.18Sqm but not exc 0.38 Sqm,in floor finishes set and joineted in neat cement slurry and pointed in white or colured cement to match shade of tiles incl and over 15mm thick screed bed or beding layer in cement mortor 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premisescomplete all as specified and directed. complete all as specified. |
| 14 | M&L Virified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles incl and over 15mm thick screed bed or beding layer in cement mortor 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premisescomplete all as specified and directed. complete all as specified. |
| 15 | M&L for Glazed ceramic coloured tiles 450X350X7mm thick as on vertical surfacesover and including 10mm thick rendering of cement mortar (1:4) including poinintg in white cement with pigment to match the shade of tiles incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premises complete all as specified and directed. |
| 16 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles complete all as specified & directed. |
| 17 | M & L Brick work with sub class "B" bricks straight or curved on plain exceeding 6 meteres mean radius in cement mortor 1:6 complete all as specified and directed. |
| 18 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 19 | M&L 10 mm thick cement plaster on fair faces of brick or stone masonary surface in cement mortor1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | Preparation ofnew plastered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and directed. |
| 21 | Preparation ofold decorated plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed. |
| 22 | M&L 15 mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortor1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 24 | Preparation of old decorated surfaces of wall and applying one coat of oil bound distemper (oil emulsion) white or tinted complete all as specified and as directed. |
| 25 | M&L for rendering cement plaster 5 mm thick in cement mortar 1:3 on fair faces of concrete in ceiling, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for preparing new plastered or un-plastered surfaces of ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 27 | M&L for preparing old plastered or un-plastered surfaces and applying two coats of white wash on walls complete all as specified and directed. |
| 28 | Preparation of old wooden or wooden based surfacesexc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | Preparation of old painted steel surfaces of any description not otherwise describedexc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | M & L applying one coat ofwall puttyon wall 2 mm thick complete all as specified and directed. |
| 31 | M& L forapplyingtwo coat of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as specified and directed. Make: Asian :apex ultima , NerolacSuraksha |
| 32 | Taking down shutters of any descriptionexceeding 1 sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 33 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 34 | S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc.Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed. |
| 35 | S&F factory made 2nd class hardwood, 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 36 | S&F 35 mm thick, 2nd class hard wood factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 37 | S& FGalvanished MS wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples complete all as specified and directed. |
| 38 | S& F in repairGalvanished MS wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples complete all as specified and directed. |
| 39 | Hacking out old broken glass ( any thickness , size, quality or description) from wooden framesincludingpunching or drilling out old glazing pins or spring clipsandprovidingand fixing new clips or pins, complete all as specified and directed. |
| 40 | S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, all as specified |
| 41 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area not exceeding1.50 Sqmeach, including cutting holes for taking out hold fasts or dismantling brick work(holes cut and anyother damages to jambs , walls for taking out hold fast shall be finished idetical to existingfinish without any extra cost of Govt) complete all as specified and directed. |
| 42 | S&F factory madesolid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed |
| 43 | S&F Factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed |
| 44 | S&F 150 mm long aluminium bow handles cast type anodised complete all as specified and directed. |
| 45 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 46 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 47 | S&F 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 48 | S&Fbutt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed. |
| 49 | S&F butt hinges med weight cold rolled MS, size 75 mm complete all as specified and directed. |
| 50 | S&F in repair 25mm curtain rod stainless steel fancy type with finale cap 2 Nos stainless steel bracket including fixing arrangement in walls etc complete all as specified and directed. |
| 51 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 52 | M&L Machine cut kota stone slab 18-20mm thickover cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 15mm thick screed bed or beding layer in cement mortor 1:6in floors etc. complete all as specified and directed. |
| 53 | Taking up or down steel tubing with connectionsfor cleaning for refixing or removing to store yard complete of bore 15mm complete all as specified and directed. |
| 54 | S&F galvanisedmildsteel water tubes,15 mm bore with all fittings, "medium grade", ISI marked, galvanised,fixed to walls and ceiling or laid in floors complete all as specified. |
| 55 | Refixing and cleaning 15mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed. |
| 56 | Taking up or down steel tubing with connectionsfor cleaning for refixing or removing to store yard complete of bore20 mm complete all as specified. - |
| 57 | S&F galvanisedmildsteel water tubes,20mm bore with all fittings, "medium grade", ISI marked, galvanised,fixed to walls and ceiling or laid in floors complete all as specified. |
| 58 | Refixing and cleaning 20mmbore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed. |
| 59 | S&F rotational moulded polythylene water storage tank 500 Ltr capacity cylindrical vertical with closed top, hoisted and fixed in position all as specified in SSR Pt-I including ball brass valves 20 mm bore high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferruleincluding dismantling unsv water tanks exc 250 ltr but not exc 500 ltrs complete all as specified and directed. |
| 60 | S&F in repair Vitreous china squatting pan "Orissa" pattern " size 580x440mm white, with integral foot rests (excluding fiushing cistern and flush pipe ) including connection to trap, anti syphonage pipe, etc complete all as specified and directed. |
| 61 | S&F in repairCast iron P trap of 100mm dia bore for “Orissa type WC ISI marked complete all as specified and as directed |
| 62 | S&F in repair vitreous China wash basin, white, flat back of size 550 x 400 mm including, waste pipe, brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. |
| 63 | Supply and fix in repairs PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve, float valveand handle including brackets 10 ltrs capacity complete all as specified and directed. |
| 64 | Supply and fix in repair flush pipe of polyethylene of low and high density of PVC 32 mm for low level cisterncomplete all as specified and directed. |
| 65 | Supply and fix in repair PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks complete all as specified and directed. |
| 66 | Supply and fixin repair 15mm bore bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 67 | S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screweddown for iron pipe fixed complete all as specified and directed. |
| 68 | Supply and fixin repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size fixed complete all as specified and directed. |
| 69 | M&L in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement,diameter of outlet 75mm complete all as specified and directed. |
| 70 | Dismantling wall and ceiling boards fibre, pulp insulation etcor insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 71 | M&L 4 mm Asbestos cement plain building boards, fixed to /GI/Aluminium framework with screws complete all as specified |
| 72 | M&L 4 mm thick Veneeredplywood, grade 1 (with BWR resin) with decorative face veneerson only one face fixed with nails to timber frame work as in wall and ceiling complete all as specified. |
| 73 | S&F 2nd class HW plain fillets, sectional area exceeding 13 nadnot exceeding 25 sqcm,square, rectangular or triangular in section, clean sawn, secured with nails complete all as specified and directed. |
| 74 | M&L for Lagging to 15mm GI pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed with puff insulation chicken wire mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed. |
| 75 | M&L for Lagging to 20mm GI pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed with puff insulation chicken wire mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed. |
| 76 | Dewatering of contaminated/waste water from septic tank/sokage wells of any capacity and depth through pumping and disposal off the same through soil tanker out of MOD land distance not less than 3 KM complete all as specified and directed. |
| 77 | Cleaning of Septic tanks of any capacityand depth including inlet chember outlet chember removing out the scum silt residues both organic or inorganic type plugging the incoming sewagelines ,removing sludge and sludge water by pumping or manually or by any means and the sludge/sludge water is to be disposed offin covered containers to a distance exc 2 Kms outside the periphery of defence landincluding taking off and refixing manhole covers. complete all as specified and directed.Note:-cost of excavation and earthwork for pits is deemed to be includedin the unit rate . |
| 78 | Cleaning of manholes not exceeding 1.5min depthand by pumping or manually or by any means and the sludge/sludge water is to be disposed offin covered containers to a distance exc 2 Kms outside the periphery of defence landincluding taking off and refixing manhole covers complete all as specifiedand directed. |
| 79 | Cleaning of manholes exceeding 1.5m and n.exc 3m.in depthand by pumping or manually or by any means and the sludge/sludge water is to be disposed offin covered containers to a distance exc 2 Kms outside the periphery of defence landincluding taking off and refixing manhole covers, complete all as specifiedand directed. |
| 80 | Cleaning of SGSW, PVC sewage lines of 100/150mm internal dia laid in any slope, gradient, depth by rodding from manhole to manhole for Cleaning and well flushing by taking off manhole coverand placingthe samein position after cleaning etc and by pumping or manually or by any means and the sludge/sludge water is to be disposed offin covered containers to a distance exc 2 Kms outside the periphery of defence landincluding taking off and refixing manhole covers. complete all as specifiedand directed. Note:-The rates quoted in above item includes cost of T&P like rods ,bamboos & ropes etc complete. The minimum 02 (two) persons shall be deployedby contractor and they shall be presenton all working days from 0900 to 1700 hours of maintof Sewage line the person will be detailed by JE/AGE concerned every morning for attending complaints daily basis |
| 81 | Opening /Cleaning and making operational the blocked water closet (Indian/orrisa or English type)at any floor including cleaning of traps and CI drain pipe (any type and any position)from WC"s/trap to manhole Cleaning and well flushing,pressure pumping , taking out all residues etc and removing the same to distance not exceeding 1000m, burried the same underground in low laying area and covering the same withearthincluding removal of surplus soil to a distance not exc 500m. complete all as specified and directed. Note:-The complaint has to be rectified within defined timeas given in complaint slip failing which penalty will be imposed as Rs100/- |
| 82 | Cleaning of cast iron /PVC pipe 75/100mm bore fixed to wall by means of opening and rodding through the oval acess door Cleaning and well flushing , taking out all residue etc.closing the oval acess doorand removing the sludge material, complete all as specified and directed. |
| 83 | Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth,in soft and loose for foundation etc.or for shafts,wells,drain pipes n.exc10sqm on plan and getting out complete all as specified and directed. |
| 84 | Returning, filling in , including spreading, levelling, watering and well ramming in layers not exc25 cm thick complete all as specifed and directed. |
| 85 | Removing surplus soil to a distancenot exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specifed and directed. |
| 86 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 87 | M&L for Precast Cement concrete1:2:4 type B-1 using (20 mm graded crushed stone aggregate) but in landing, cover slabs (for manhole etc)chullah hoods,chajjas water trough,mangers,shelves and similar articles with plain face set in CM1:4 incl demolition of cement concrete (reinforced) of any discription and in any position not otherwise specifically provided complete all as specified and directed. |
| 88 | TMT Bars 10mm dia and over in reinforcement,cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips complete all as specifed and directed. |
| 89 | TMT Bars 6 to 8 mm dia and over, cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips complete all as specifed and directed. |
| 90 | M&L for 15mm thick Rendering on other than fair face of stone masonrt/brick/concrete surface in CM 1:4 andfinished even and smooth without using extra cement complete all as specified and directed. |
| 91 | M&L for cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in copings incl demolition of PCC ground flooretc complete all as specified and directed. |
| 92 | M&L for Salt glazed stoneware drain pipes of internal daimeter 100 mm grade "A" laid in trenches and jointed incl demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar any internal dia of pipe complete all as specified and directed. |
| 93 | M&L for Salt glazed stoneware drain pipes of internal daimeter 150 mm grade "A" laid in trenches and jointed incl demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar any internal dia of pipe complete all as specified and directed. |
| 94 | M&L for Reinforced concrete pipes 200 mm bore , class NP2, laid and jointed completewith collars laid in trenches and jointedincl demolition and breaking up drain pipes complete all as specified and directed. |
| 95 | M&L for Concrete bed to drain pipes of bore 100 mm dia including packing under and haunching against thesides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate including necessary shuttering and supports complete all as specified and directed. |
| 96 | M&L for Concrete bed to drain pipes of bore 150 mm dia including packing under and haunching against thesides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate including necessary shuttering and supports ,complete all as specified and directed. |
| 97 | M&L for cement concrete 1:3:6 type C2, using 40mm graded stone aggregate in bed to drain pipe including jointed complete in CM 1:1 with Concrete bed to drain pipes of bore 200 mm diapacking underpacking under and haunching against the sides of pipe after they are laid and tested for 200 mm bore of pipe complete all as specified and directed. |
| 98 | Cutting into existing manholes for connecting new drains,making good to pipe 100 mm dia and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in PCC 1:2:4 type B-1.smooth finished and reforming benching as required complete all as specified and directed. |
| 99 | Cutting into existing manholes for connecting new drains,making good to pipe 150mm dia and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in PCC 1:2:4 type B-1.smooth finished and reforming benching as required complete all as specified and directed. |
| 100 | Cutting into existing manholes for connecting new drains,making good to pipe 200 mm dia and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in PCC 1:2:4 type B-1.smooth finished and reforming benching as required complete all as specified and directed. |
| 101 | S&F for 110mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenches or floor incl dismantling of cast iron or reinforced concrete, PVC(SWR)pipes,joinetd in cement mortor and taking out of trenches complete all as specified and directed. |
| 102 | S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor incl dismantling of cast iron or reinforced concrete, PVC(SWR)pipes, joinetd in cement mortor and taking out of trenches complete all as specified and directed. |
| 103 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 104 | S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 105 | M&L for cast iron floor trap with dia of outlet 100mm with CI grating including jointing to waste pipefixed in cement concrete PCC 1:2:4 type "B1" complete all as specified and directed. |
| 106 | 75 mm bore PVC (SWR) bends (any radius ) complete all as specified and directed. |
| 107 | 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 108 | S&F in repair 100 mm bore cast iron soil, sand cast waste and vent pipes in any length with or without ears with cement joints fixed to wall complete all as specified and directed. |
| 109 | S&F in repair 75mm bore cast iron soil, sand cast waste and vent pipes in any length with or without ears with cement joints fixed to wall complete all as specified and directed. |
| 110 | S&F in repair for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 111 | S&F in repairs for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 112 | S&F in repairs for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl providing and fixing plugs,bedding urinals against wall in CM 1:2, securing to plug with and incl 60mm long brass scre etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
