|
| 1 | Part-l (Structural work): Dismentalling of old structure incld stacking of serviciable material and disposal of unserviciable material within a lead as directed by site Engineer incld clreance of site. |
| 2 | Earth work in excavation for all kinds of soil, by manual / mechanical means in trenches for foundation, drains, pipes, cables, etc: not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan, including disposal of excavated earth up to a leadas directed by site engineer incharge, disposed soil to be levelled and neatly dressed including setting out. |
| 3 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete below Foundation& rooms including carriage with cost and carriage complte. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size)PCC below Foundation& rooms-Mudmat including carriage and cost. |
| 5 | Filling inplinth etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering complete job with cost and carriage complete.a) Available earth filling in trenches. |
| 6 | b)Sand filling under flooring in rooms. |
| 7 | C) Nallah Muckfilling under flooring in rooms. |
| 8 | (D) Khakbajreefilling under flooring in rooms. |
| 9 | Providing and laying in position specified grades of reinforced cement concrete M-20 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level with cost and carriage . |
| 10 | Providing and laying in position specified grades of reinforced cement concrete M-20 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work aboveplinth level with cost and carriage . |
| 11 | Providing and laying in Position specified grade of cement Concrete M-15 Grade using 20 mm thick crushed stone aggregrate excluding the cost of centreing ,Shuttring,finishing and reinforcement .All work upto plint lavel incld cost and carriage complete. |
| 12 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels with cost and carriage . |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for with cost and carriag complete with cost and carriage Foundation,Footings and bases ofColumns etc. |
| 14 | Plinth beam, lintels, beams, Girdersbressumers and Cantilevers. |
| 15 | Columns, pillers, piers, Abuments posts and struts |
| 16 | Suspended floors, roofs, landings balconies and Access platform |
| 17 | Edges of slab and breaks in floors and walls. |
| 18 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a one or more coats of Approved steel primerall complete, including cost and carriage of all materials from source to site of work.(Finished work to be measured, complete) |
| 19 | Providing and fixing of ISMB300 Grider beam for Crane block incld Cost and carriagecomplete |
| 20 | Providing color caoted track deck sheet roofing fixing with polymer coated J or L hooks bolts overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins rafters and trusses.with carriage |
| 21 | Providing and fixing ridges or hips of width 60cm overall width color coated sheet 0.63mm thickfixed with polymer coated J or L hooks, bolts and nuts complete with cost and carriage . |
| 22 | Part ll Finishing: Brick work with F.P.S bricks of class designation 75in super structure upto floor -v lavel in: Cement mortar 1:6 (1 Cement : 6 coarse sand) Inculding costand carriage of all material & curing) |
| 23 | 12 mm thick cement plaster 1:4 (1 Cement:4 fine sand) on all surfacesincluding cost and carriage of all material and curing |
| 24 | Preoviding and applying2 mm thick cemernt based wall puttyover plastered surface to prepar thr surface even on smooth incl. preparing the surface( Brilla make) incl.all cost and carriage |
| 25 | Providing And applyingCementprimer( One or more coat)of approved brand and manufactureincl.costand carrag complete, |
| 26 | Painting with Interioremulsion paint of approved brand and manufacture(Wallsa)to give an even shade.Two or more coats on new work incld sky folding ,curing withone or more coats of cement Primer with costand carriage complete. |
| 27 | Providing And applyingreadxy mix pink or rgrey primer( One or more coat)of approved brand and manufacture on new wood work incl.costand carrag complete, |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces with cost and carriage . |
| 29 | Providing & making of 4 \" POP Ornamental corner cornice including cost of all material and labour. |
| 30 | Providing & fixing 1st qulaity ceramic glazed tiles conforming 5mm of approved make like NITCO,JOHNSON, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, riser opf steps and dodos over 12mm thick bed of cement motor 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/Sqm including pointing in white cement mixed with pigment of matching shade complete. Ceramic Tiles (upto 6\" on walls) with cost and carriage. |
| 31 | Providing & fixing ceramic tile flooring over 20mm avg.thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 (1 cement : 4 coarse sand) including cost of cement and curing with cost and carriage . |
| 32 | 50mm cement cone. Flooring 1:2:4 ( 1 cement 2 coarse sand: 4 hard stone ballast 20 mm & down gauge) finished with a floating coat of neat cement with cost and carriage . |
| 33 | Providing first class deodarwood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position with cost and carriage . |
| 34 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters Ist Class Kail woodfor , doors , including lSI marked M.S. pressed Butt hinges, bright finished of required size, with necessary screws, including Kail Wood Panelling for Doorss of requred thicknessofall ISI marked aluminium fittings, that is Handles, Tower Bolts, L-drops etc; of required shape and size, all complete as per direction of engineer - in charge with cast and carrige complete with priming coat and paintingwithcost and carriage complete |
| 35 | Providing and fixing 35 mm thick wire gauze window shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows, including lSI marked M.S. pressed Butt hinges, bright finished of required size, with necessary screws, and all ISI marked aluminium fittings, that is Handles, Tower Bolts, L-drops etc; of required shape and size, all complete as per direction of engineer - in charge. (1st Class Kail Wood) |
| 36 | Providing & fixing 40X5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts nuts and wooden plugs embeddings in cement concrete block 30x10x15 1:3:6 mix with cost and carriage . |
| 37 | Providing and fixing4mm thick float glass panes (for fixed portion)with necessary kail wood beadings (40 mm x 20 mm) and nails complete incld cost and crriage complete. |
| 38 | Providing and fixing 18 mm miror fininshedgranite sheets best quality over stairs and sinilar locations of required size of approved shade, colour & texture laid over 20mm thk base cement mortar 1:4 (1 cement, 4 coarse sand) and joints treated with white cement, mixed with matching pigments, epoxy touch ups incld necessar nosing with cost and carriage. |
| 39 | Providing and fixing of stainless steel railing of 304 Grade of height upto 36” to stairs, landings etc including vertical and horizontal members and hand rails of 50mm dia as per approved Pattern including cutting of granite/floors and fastening with led grouting with cost and carriage . |
| 40 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth with cost and carriage . |
| 41 | Suppying and fixing rolling shutters of approved make, made ofsize 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover, M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. |
| 42 | Providing and laying of 25 mmthick Kota stone Slab flooring over20 mm thick base overjioned with grey cementslurrymixed with pigment to match the shade of the slabincld rubbng and plishng complete with base of cement mortor 1:4( 1 cement : 4 Sand C oarse) withcost and carriage complete. |
| 43 | Sanitary Part-lll: Earth work in excavation for all kinds of soil, by manual / mechanical means in trenches for foundation, drains, pipes, cables, etc upto required depth and widthincluding disposal of excavated earth up to a leadas directed by site engineer incharge, disposed soil to be levelled and neatly dressed includingDewatering of trenches, soackag pit, if required during execution of work (Stump measuremets shall be made , no extra shall be paid for slops etc) all kind of soil. |
| 44 | Supply and filling of dry stone soling in foundation trenches tigtly handpacked with hand ramming, watering incl.costs and carriage of materials from source to site of work complete with cost and carriage. |
| 45 | Providing and laying in position cement concrete (1:4:8 mix), 1 cement : 4 Coarse Sand : 8 GradedCrushed Stone Aggregate 40 mm nominal sizeexcluding the cost of centering and shuttering,including cost and carriage of all materials from approved source to site of work,All work up to plinth level:- (Finished work to be measured, complete) with cost and carriage. |
| 46 | Cement Plaster 12 mm thick, with cement mortar 1:4 mix (1 cement : 4 coarse sand), finished with a floating coat of neat cement, including cost and carriage to site of work. |
| 47 | Dry random rubble masonry with hard stone in foundation and plinth for Soakage pit: Using quarry stone with bond stone,including cost and carriage of all materials from approved source to site of work, (Finished work to be measured, complete) |
| 48 | Providing and laying in position specified grade of reinforced cement concrete M-20 grade in beams ,slabs ,walls (any thickness) incld attached pillasters ,buttresses,plinth and string courses,filets,columns,stair,pillars,piers,abutment ,posts and struts etc using 20 mm thick crushed stone aggregrate excluding the cost of centering,shuttering,finishing and reinforcement with cost and carriage complete. |
| 49 | Reinforcement for R.C.C. work Cold twisted bars, including straightening, cutting, bending, placing in position and binding with carriage and costupto site of work and (Finished work to be measured, complete.) |
| 50 | Centring and shuttermg including strutting, propping etc.and removal of form for walls ,suspended floors with cost and carriage. |
| 51 | Walls any thickness |
| 52 | Constructionbrick massionary chamber for under ground C.I ispection chamber and bend with 75 class designation bricks in cement mortar 1:5 (1 cement; 5 fine sand ) CI cover with frame (light duty) 455X610 mm internal dimesions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23 kg and weight of frames 15 kg) R.C.C top slab with 1:2:4 mix (1cement :2 coarse: sand :40 graded stone aggregrate 40mmnomial size), foundation concrete 1:5:10 (1 cement : 5 fine sand :10 graded sto aggregrate 40 mm nominal size), inside plastering12 mm thick with cement mortar1:3 ( 1 cement : 3 coarse sand ) finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design: Inside dimesiions 450x450 x300 mm deep standrard design with F.P.S bricks with crushed stone aggregrate incld all cost and carriage. |
| 53 | Providing and fixing PVC soil, waste and vent pipes (Prince/phinolex) with all fittings that is bends/door bend, collars, tees,reducer/elbow,clipsand other fixtures complete,including cutting and making good the walls etc with all cost and carriage . (Finished work to be measured, complete) (a) 110 mm dia |
| 54 | (b) 75 mm dia |
| 55 | Providing and fixing nominal bore , medium grade G.l. pipes ofclass-B(Suraya Prakash/Jindal) for internal work concealed complete with G.l. fittings and clamps, including cutting and making good the walls with cost and carriageetc. complete (a) 25 mm dia. |
| 56 | (b)20mm dia. |
| 57 | ©15 mm dia. |
| 58 | Providing and fixing gate value of approved quality 25 mm dia of approved make and standard, leading quality, made in India, conforming to IS standards, including other fittings, fixtures and accessories complete,including all carriage and costcomplete. |
| 59 | (b) 20 mm dia |
| 60 | (C) 15mm dia |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes incld making of necesssary wooden platform forthe base support for tank (Sintex, Electroplast, Star, Lotus ) with cost and carriage(Finished work to be measured, complete) |
| 62 | Providing and fixing PVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. (100 mm inlet and 100 mm outlet) with cost and carriage. |
| 63 | Providing and fixing 100 mm dia CI grating for gully, floor or Nahani trap including all costs and carraige(Finished work to be measured, complete) |
| 64 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredincld cost and carriage (Ceera/Hindware). |
| 65 | Providing and fixing water closet squatting pan ( Europeantype W.C. pan) Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required incld cost and carriage (Ceera/Hindware). |
| 66 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete(Ceera/Hinware) |
| 67 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,of, or the reception of pipes and fittings (Hindware/ceera) |
| 68 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete incld cost and carriage. |
| 69 | Providing and fixing PTMT towel railcomplete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: (450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.) incl cost and carriage. |
| 70 | Providing and fixing C.P. brass angle valve 15 mm nominal borefor basin mixer and gyser points of approved make conforming to IS : 8931 incld cost and carriage( JacquarFloritine) |
| 71 | Providing and fixingC.P. Brass closed hole basin mixer 15 mm diaof approved make and standard, leading quality, made in India, conforming to IS standards, including other fittings, fixtures andaccessories complete, with item specifications as per SSR/2012, including all costs and carriagecomplete. ( JacquarFloritine) |
| 72 | Providing and fixingC.P. Brass Wallmixer 15 mm dia of approved make and standard, leading quality, made in India, conforming to IS standards, including other fittings, fixtures andaccessories complete, with item specifications as per SSR/2012, including all costs and carriagecomplete.( JacquarFloritine) |
| 73 | Providing and fixingsink mixer 15 mm dia of approved make and standard, leading quality, made in India, conforming to IS standards, including other fittings, fixtures an daccessories complete, with item specifications as per SSR/2012, including all costs and carriagecomplete.( JacquarFloritine) |
| 74 | Providing and fixingC.P. Brass bib cock 15 mm diaof approved make and standard, leading quality, made in India, conforming to IS standards, including other fittings, fixtures andaccessories complete, with item specifications as per SSR/2012, including all carriage and costcomplete.( JacquarFloritine) |
| 75 | Providing and fixing of approved quality water heater (Geyzer) (Venus / Racold) brand, including standard quality fixtures and fittings etc; cost and carriagecomplete 50 ltr Capacity. |
| 76 | Providing and fixing of approved quality water heater (Geyzer) (Venus / Racold) brand, including standard quality fixtures and fittings etc; cost and carriagecomplete 25ltr Capacity. |
| 77 | Providingand fixingPVC waste pipes for sink or wash basin incld P.V.C waste fittings complete flexiable 40 mm with cost and carriage. |
| 78 | Providing fixing PVC connection incl all cost andcariages complete. |
| 79 | Providing and fixing Salem Stainless Steel A lSI 304 (18/8)sink 600x450 bowl depth 178mm as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required complete. |
| 80 | Providing installation testing and commissioning of 1.00 KVA water pump of standard make, ISI marked (Crompton / Kirloskar) including fittings and fixtures etc complete with cost and carriage |
| 81 | Providing Consultancy service charges for Architecture /Structural design as per IS Standard. |
