Supply Of Electrical And Engineering Fitout Items For 11 Nos. Army Frp Patrol Boats. Supply Of Electrical And Engineering Fitout Items For 11 Nos. Army Frp Patrol Boats. , Hand Operated Fire Pump: 38Mm ( 1½” ) Bore Hose. 365X200x260mm Lxwxh, 450Mmha, Goa Shipyard Limited-Goa
TDR : 29373020
Tender Notice
Corrigendum Details
BOQ
Expired
Goa Shipyard Limited
Goa
Corrigendum : Supply Of Electrical And Engineering Fitout Items For 11 Nos. Army Frp Patrol Boats. Supply Of Electrical And Engineering Fitout Items For 11 Nos. Army Frp Patrol Boats. , Hand Operated Fire Pump: 38Mm ( 1½” ) Bore Hose. 365X200x260mm Lxwxh, 450Mmha
Name of Work: SUPPLY OF ELECTRICAL & ENGINEERING FITOUT ITEMS FOR 11 NOS. ARMY FRP PATROL BOATS
Sl. No.
Item Description
1
HAND OPERATED FIRE PUMP: 38mm (1½”) bore hose. 365x200x260mm LxWxH, 450mmhandle. Output 135 litres/minute.Double diaphragm. Each side of pump can work. SS handle with bhd. clips. Self-priming up to 6m. Deliveryhead 6m. Mounts on deck, or through deck. Weight of Pump5.00 Kgs.The Pump should be supplied with all associated deck mounted fittings items such as :1) Bracket under deck for hand pump2) Kit thru deck for Amazon hand pumpAs per TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
2
SUBMERSIBLE BILGE PUMPS WITH AUTOMATIC FLOAT SWITCH: 24V DC, Self-Priming, Submersible Bilge Pumps With Automatic Float Switch with capacity of not less than 8 m3/Hr. The pump shall be low energy Consumption, Compact and light weight and dry running capability. The Automatic Float Switch shall be capable to activate the pump when the bilge water level reaches 50 mm. The Outlet size shall be 32 mmAs per TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
3
DG ROOM VENTILATION SYSTEM:i) EXHAUST FAN : Electric Ventilator fan of capacity 72 Cu.M/Hour along with 2-speed switch Or equivalentii)SHELL VENTILATORS AIR INTAKE : UFO Deck ventilator (stainless steel AISI 316) type UFOiii) SHELL VENTILLATOR: Stainless steel Shell ventilatorAs per TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
4
ANCHOR BOW ROLLER: Stainless steel Bow roller which is approved type for handling 25 kgs Anchor along with chain and rope.The Length of Bow roller should be such that it should project outside Foam fender installed on forward side of Boat. The length from bolting area to centre of roller should be minimum 500 mm. As per TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
5
ENGINE ROOM EXHAUST LOUVERS: SS ROUND VENTS of 127 mm diaAs per Fig. No. TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
6
MICROWAVE OVEN: One 230 V AC Microwave Oven per boat for heating of food. The total power consumption of Oven should not be more than 1200W in any mode.Weight of Oven should not be more than 12 KgsAs per TA. No.: 15/GES/IA/12PB/E&E dated 11-09-2021
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
