|
| 1 | Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Material and labour 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring in patches n. exc. 5 Sqm in each patch finished even and smooth (without using extra cement) complete all as specified and directed. |
| 3 | Supply and fixing glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outsideMD land complete all as specified and directed. |
| 5 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), as in sub floors, sub base; concrete surfaces finished even & fair to receive topping floor finish/layer all as specified and directed. |
| 6 | Material and labour non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 7 | All as per item No 6.00 but on vertical surfaces such asskirting/ dado laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat. |
| 8 | Material and labour for non skid ceramic coloured tiles of size 300 x 300 x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 9 | Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 15mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. |
| 10 | Material and labour 15/16mm thick machine cut Udaipur green polished stone slab, set and jointed with neat cement slurry mixed with pigment to match the colour of stone, laid over and including minimum 15mm thick screed bed in cement mortar (1:6) including cutting and polishing and making holes in stone and RCC shelves suitable for passing gas pipe with round edges as required complete all as specified and directed. |
| 11 | Material and labour chequeredcement concrete tiles 25cm x 25cm x 20 to 22mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 12 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 13 | Material and labour reinforced cement concrete (1:2:4) type B-0 using 12.5mm crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed. |
| 14 | Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 15 | Taking down door shutters of any description exc. 1 sqm each and n.exc 2 Sqm each complete all as specified and directed. |
| 16 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed. |
| 17 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame)area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed. |
| 18 | Supply and fixing structural framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality A, complete including two coats of synthetic enamel paint over a coat red oxide primer all as directed |
| 19 | Material and labour 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 20 | Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed. |
| 21 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 22 | Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed. |
| 23 | Supply and fixing 100mm sizemild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed complete all as specified and directed. |
| 24 | All as per item No. 23.00 but in repair |
| 25 | Supply and fixing 75mm sizemild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed in repair complete all as specified and directed. |
| 26 | Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified. |
| 27 | Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 28 | Supply and fixing mild steel pressed handles, oval type, stove enameled black 150mm size complete fixed all as specified and directed. |
| 29 | Supply and fixing PTMT handles 150 mm Size fixed with screws all as specified |
| 30 | Supply and fixing MS barrel tower bolt, 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed |
| 31 | Supply and fixing PTMT tower bolts 200mm longfixed with screws all as specified and directed |
| 32 | Supply and fixing in repair aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long all as specified and directed. |
| 33 | Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised, 150mm size, all as specified and directed. |
| 34 | Supply and fixing steel window 1.25mm thick box type (primer coated) ERW hollow P-section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mmand 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07.Note: Grill/ flat iron and glass panes/ wire mesh shall be measured and paid separately under respective item of this BOQ. |
| 35 | All as per Ser item No. 34.00 but gauged shutters without sash bars. |
| 36 | Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed. |
| 37 | Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed complete all as specified and directed. |
| 38 | Material and labour in repair galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed complete all as specified and directed. |
| 39 | Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 40 | Taking down and refixing the shutter in the same opening after easing and adjusting and making the door closing properly, area of shutter of exc. 1 sqm but n. exc. 2 Sqm each complete all as specified |
| 41 | Resecuring or easing and adusting without taking down shutters of any description, area exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed. |
| 42 | Supply and fixing 12mm thick plywood, grade BWR type BB (No. of ply 5) fixed with screw to timber framework as in shutters, shelves etc., fixed in repair complete all as specified and directed. |
| 43 | Petty repairs to cupboard (kitchen) including easing of cupboard shutters including taking down and re-fixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cupboard irrespective in numbers of shutters and drawers) complete all as specified. |
| 44 | Supply and fixing in repair aiuminium floor door stopper 63mm with two rubber legged completeall as specified and directed. |
| 45 | Material and labour petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making it serviceable complete all as specified and directed. |
| 46 | Supply and fixing in repair mild steel handle left or right side for window duly painted with black Japan paint complete all as specified and directed. |
| 47 | Supply and fixing in repair steel peg stay 250mm long black Japan fixed with screw or welded if required complete all as specified and directed. |
| 48 | Material and labour welding in repairs not exceeding 2.5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified and directed. |
| 49 | Supply and fixing in repair anti-dusting rubber beading for door shutter for anti snakes, dusting etc all as specified and directed. |
| 50 | Material and labour for 3mm thick plain glass fixing and glazing with oil putty/ nails wire including hacking out old broken glass in wooden/ steel frame complete all as specified and directed |
| 51 | Supply and fixing 2nd class hard wood plain fillets; square or rectangular or triangular in section and bull-nosed, splayed, chamfered or rounded on one edge or face, clean sawn, planed on both sides secured with nails or beads, sectional area exc. 3 sqcm and n. exc. 6 sqcm duly painted complete all as specified and directed. |
| 52 | Material and labour 25mm dia mild steel pipe curtain rod, powder coatedfixed with & includingMS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified |
| 53 | Material and labour petty repairs to PVC door shutter by making minor adjustment to hinges etc easing of shutter including taking down of shutter if required complete all as specified and directed. |
| 54 | Material and labour petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards serviceable including provision of new keys complete all as specified and directed. |
| 55 | Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup board with brackets, stops, rollers etc complete all as specified and directed. |
| 56 | Material and labour 19/ 20mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework including fixing arrangement, complete all as specified and directed. |
| 57 | Supply and fixing in repairs stainless steel peg set of 6 complete all as specified and directed. |
| 58 | Supply and fixing 40mm dia powder coated cupboard knobs fixed with nut screws and washer of mild steel bright finish powder coated complete all as specified. |
| 59 | Supply and fixing ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed |
| 60 | Supply and fixing 100mmsize hasp andstaple, mild steel, wiretype, stove enameled black, including bolt to hinge plate and fixed with screws completeall as specified and directed. |
| 61 | Material and labour petty repair to steel rolling shutter of any size and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing etc and making the shutters serviceable complete all as per existing pattern as specified. |
| 62 | Material and labour racking out joints/ pointing, hacking for key, scrubbing down with water and flush pointing in cement mortar 1:3 on brick tiles compete all as specified and directed. |
| 63 | Material and labour 15mm thick rendering in patches n. exc. 3 sqm each patch in cement mortar (1:4)finishing the surface even and smooth without using extra cement including taking down plastering and applying three coats of white wash complete all as specified and directed. |
| 64 | Material and labour 5mm thick rendering in patches n. exc. 3 sqm each patch in cement mortar (1:3) as on ceiling and finishing the surface even and smooth without using extra cement including taking down plastering and applying three coats of white wash complete all as specified and directed. |
| 65 | Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregateas in filling in sunken portion complete all as specified and directed. |
| 66 | Material and labour for applying two coats of SHALIMAR SUPERCRETE/ NITOBOND water proofing coating on sunken portion complete all as specified and directed. |
| 67 | Material and labour for 15mm thick cement screed in cement mortar (1:3) with integral WPC FOSROC’s complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC’sNitco bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag complete all as specified and directed. |
| 68 | Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tintmatching with the existing surfaces; work in building at any height as required complete all as specified and directed. |
| 69 | Taking down old GI tubing 15mm bore and connections including fittings complete all as specified. |
| 70 | Taking down old GI tubing 20mm bore and connections including fittings complete all as specified. |
| 71 | Supply and fixing galvanised steel water tubes \"medium grade\", 15mm bore, with and including all GI fittings fixed to walls, ceiling or laid in floors, complete all as specified and directed |
| 72 | Supply and fixing galvanised steel water tubes \"medium grade\", 20mm bore, with and including all GI fittings fixed to walls, ceiling or laid in floors, complete all as specified and directed |
| 73 | Supply and fixing in repair GI socket 15mm bore as approved complete all as specified and directed. |
| 74 | Supply and fixing in repair GI socket 20mm bore as approved complete all as specified and directed. |
| 75 | Supply and fixing in repair GI nipple 15mm bore 100mm long as approved complete all as specified and directed. |
| 76 | Supply and fixing in repair GI nipple 20mm bore 75mm long as approved complete all as specified and directed. |
| 77 | Supply and fixing in repair GI nipple 20mm bore 100mm long as approved complete all as specified and directed. |
| 78 | Supply and fixing in repair GI nipple 20mm bore 150mm long as approved complete all as specified and directed. |
| 79 | Supply and fixing in repair GI tanki nipple 15mm bore 150mm long as approved complete all as specified and directed. |
| 80 | Supply and fixing in repair GI tanki nipple 20mm bore 150mm long as approved complete all as specified and directed. |
| 81 | Supply and fixing in repair 15mm bore GI union as approved complete all as specified and directed. |
| 82 | Supply and fixing in repair 20mm bore GI union as approved complete all as specified and directed. |
| 83 | Supply and fixing in repair 15mm bore GI elbow as approved complete all as specified and directed. |
| 84 | Supply and fixing in repair 20mm bore GI elbow as approved complete all as specified and directed. |
| 85 | Supply and fixing in repair 15mm bore GI Tee as approved complete all as specified and directed. |
| 86 | Supply and fixing in repair 20mm bore GI Tee as approved complete all as specified and directed. |
| 87 | Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed. |
| 88 | Supply and fixing in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 142 gms) complete all as specified and directed. |
| 89 | Supply and fixing ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore of iron pipe or brass ferrule and fixed in repair complete all as specified and directed. |
| 90 | Cleaning of over head tank of any description and any capacity de-scaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. |
| 91 | Supply and fixing PVC cover of water tank matching with existing water tank complete all as specified. |
| 92 | Supply and fixing rotational moulded polyethylene water storage tanks, 500 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified and directed. |
| 93 | Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified and directed. |
| 94 | Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed. |
| 95 | Material and labour petty repair to leaking high/ low level flushing cistern including adjustment in the internal fittings, repairs to PVC bends pipe etc all as per directed by Engineer-in-Charge. |
| 96 | Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI \"P\" or \"S\" trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed. |
| 97 | Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 98 | Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete all as specified and directed. |
| 99 | Supply and fixing in repairwaste coupling suitable for existing WHB or sink (half or full threaded) complete all as specified. |
| 100 | Supply and fixing in repairwaste pipe suitable for existing WHB or sink (half or full threaded) complete all as specified. |
| 101 | Petty repair to stop leaking of PTMT Bib tap/ Pillar taps/ stop cock by suitable jumper washer and etc complete all as specified. |
| 102 | Petty repair to stop leaking ofCP brassBib tap/ Pillar taps/ stop cock/ wall or WHB mixture by suitable jumper washer and etc complete all as specified. |
| 103 | Petty repair to stop leaking ofCP brassBib tap/ Pillar taps/ stop cock/ wall or WHB mixture by suitable original Jaquar marked spindle (Min weight 100 grams) and etc complete all as specified. |
| 104 | Supply and fixing in repair 15mm bore standard PTMT bib tap of any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed. |
| 105 | Supply and fixing in repair bib tap cast copper alloy suitable for 15mm bore iron pipe complete all as specified and directed.. |
| 106 | Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed. |
| 107 | Supply and fixing in repair 15mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Minimum weight - 90gm) complete all as specified and directed. |
| 108 | Supply and fixing in repair 20mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Minimum weight - 90gm) complete all as specified and directed. |
| 109 | Supply and fixing in repair PTMT pillar taps, fancy type of any colour high pressure screwed for 15mm bore iron pipe and fixed (minimum weight- 120gms) complete all as specified and directed. |
| 110 | Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 111 | Supply and fixing in repairs PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed. |
| 112 | Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down , high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed. |
| 113 | Supply and fixingstop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs, complete all as specified and directed |
| 114 | Supply and fixingstop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed |
| 115 | Supply and fixingswivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) of approvedquality fixed in repair complete all as specified and directed. |
| 116 | Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified. |
| 117 | Material and labour PVC bathroom cabinet of size 535mm x 483mm x 110mm with mirror fixed in repairs complete all as specified and directed. |
| 118 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 119 | Supply and fixing brass chromium plated tower ring 15cm dia, fixed in repairs, complete all as specified and directed. |
| 120 | Supply and fixing in repairs soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed. |
| 121 | Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed. |
| 122 | Supply and fixing in repair 600mm x 450mm beveled edge mirror of selected quality 5.5mm thick glass mounted on 6mm thick commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers including fixing arrangement as per approved. |
| 123 | Supply and fixing chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality, fixed in repairs complete all as specified and directed. |
| 124 | Supply and fixing Toilet paper holder of chromium plated fixed to walls chromium plated brass screws complete all as specified. |
| 125 | Supply and fixing in repairs plastic water closet seat cover (White) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devices complete all as specified. |
| 126 | Supply and fixing in repairs chromium plated jet for EWC with 600mm long CP tube superior quality complete all as specified. |
| 127 | Supply and fixing in repairs stainless steel plate rack of superior quality size 36\" x 24\" with not less than 8 kg complete all as specified and directed. |
| 128 | Supply and fixing kitchen or laboratory sinks with drainage board made of 1mm thick stainless steel sheet with plugs, washers and wastes coupling, including bedding to dwarf wall in cement mortar or fixing cantilever brackets and connecting union to pipe; overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including PVC waste pipe fixed in repairs complete all as specified and directed. |
| 129 | Supply and fixing in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified. Make: Jaquar or equivalent from ‘Group 1’ as mentioned in Appendix ‘B’ to particular specifications. |
| 130 | Supply and fixing in repair mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed. |
| 131 | Supply and fixing in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 132 | Supply and fixing in repairs PVC (SWR) bends any radius 110mm bore all as specified and directed. |
| 133 | Supply and fixing oval access door cover cast iron fixed with CI pipe with washer, nut & bolt including cleaning and applying cement around the pipe hole for arresting the seepage complete all as specified and directed |
| 134 | Cleaning of floor trap and applying of cement around the floor trapwith sealant compound for arresting of the seepage from roof, wall, floor etc all as specified and directed.Make : WACKER SILICONES (GP Silicone Sealant). |
