Military Engineer Services-MES has published Repairs To Roof, Ceiling, Joinery, Miscellaneous Works And Periodical Services To Certain Bldgs At Rhenock And Rongli Under Ge 867 Ews Repairs To Roof, Ceiling, Joinery, Miscellaneous Works And Periodical Services To Certain Bldgs At Rhenock And Ron. Submission Date for this Tender is 13-10-2021. Shed Construction Tenders in Rhenock Sikkim. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Oct-2021 | Amendment No. 1 | Other | 13-10-2021 |
| Sl. No. | Item Description |
| 1 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. |
| 2 | M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engineer –in-Charge. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,on vertical surfaces such as skirting, dados, raisers to steps etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. Make for Item No 1 to 4: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL |
| 5 | M&L 50 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, paths etc., laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as directed by Engr-in-charge. |
| 6 | M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mmgraded stone aggregate) as in floors laid in alternative bays and finished even and smooth using extra cement including demolition of existing flooring and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for 3mm thick 38mm wide inserted in position in flooring to confirm to design complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., including demolition of existing channels and removing rubbish off the premises complete all as specified and directed. |
| 9 | M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing block masonry complete all as specified and directed by Engineer-in-charge. Make: Shankar Saw Mills/Sangam Prefeb Products or equivalent as approved by GE. |
| 10 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 including necessary hammer dressing to face stones and dressing of face beds and joints and flush pointing including demolition of existing walling complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including Integral waterproofing compound @ 3% by weight of cement as per manufacturer"s instructionscomplete all as specified and directed by Engr-in-charge. |
| 13 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cementplaster on brickor stone masonrysurfaces of walls etc., includingrakingout joints, hackingfor key, scrubbingdown with wateretc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including Integral waterproofing compound @ 3% by weight of cement as per manufacturer"s instructionsincluding taking down cementplaster on brickor stone masonrysurfaces of walls etc., includingrakingout joints, hackingfor key, scrubbingdown with wateretc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for preparingnewly plastered surfaces ofwalls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL |
| 16 | M&L for preparingnewly plastered surfaces ofwalls and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL |
| 17 | M&L for preparingnewly plastered surfaces ofwalls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. |
| 18 | S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm dia GI hangers (upto1200mm length) adjusting level and providing 4 mm thick E Board (Everest) noncombustible moisture resistant plain building boards, fixed to GI frame work with screws as in ceiling and applying 3 coats of white wash including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge. MAKE: Bison/NCL/EVEREST/UPAL or eqivalent as approved by GE. |
| 19 | Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any positioncomplete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections,(Beam, tee, angle, channel or flat sections)fixed independently without connecting plates etc.,cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and directed by Engineer-in-charge. |
| 22 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge. Make for Item No. 22&23: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL/JSWSteel or equivalent as approved by GE. |
| 24 | S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with "L" or "J" type hook boltsand bitumen washers as in roof coveringetc.,with grade of Zinc coating 120 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 Sqm and not exceeding 4 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed. |
| 27 | S&F 125x60 mm size pressed steel door frame for doors made of 1.25mm sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:2:4 type B0 filling complete all as directed by Engr-in-Charge. Make: -B A Enterprises/Multiwyn/Doorwyn/Modern fabricator/Madhu industries/Ajanta Ispat/Alusys or equivalent as approved by GE. |
| 28 | S&F 30mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of 12mm thick timber flat on both sides or of 12mm thick veneered particle board ,medium density, wood particle board with commercial face veneers with sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified directed by Engr-in-charge. |
| 29 | S & F30 mm thick second class hard wood Glazed and skeleton shutters for windows and ventilators, open rebated and prepared to receive glass,gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b) fitted to chowkats all as specified and directed. Timber for item Nos. 28&29:- Sal/Kalasiris/Chaplash/Hollock/Bijasal |
| 30 | S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and dawings. |
| 31 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC "C" channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing. Make for Item No. 30 & 31: - SINTEX / RAJSHRI PLASTIWOOD/ NANDI/ UNIVERSAL |
| 32 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. Make for Item No. 32&33: -B A Enterprises/Multiwyn/Doorwyn/ Modern fabricator/Madhu industries/Ajanta Ispat/Alusys/AVA steels or equivalent as approved by GE. |
| 34 | S & Fgalvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with tinned tacks orgalvanised wire staples or wooden beeds all as specified and directed. |
| 35 | S & Fin repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with tinned tacks orgalvanised wire staples or wooden beeds all as specified and directed. Make for Item No. 34&35: -Kamal/Shalimar or equivalent as approved by GE. |
| 36 | S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nut boltsor beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. |
| 37 | Hacking out old broken glass and S & F 3mm thick sheet glass ordinary quality fixed with oil putty or beads and necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. |
| 38 | S & F 3mm thick figured glass pin head type fixed with oil putty and necessary clips/nut bolts or beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. |
| 39 | Hacking out old broken glass and S & F 3mm thick figured glass pin head type fixed with oil putty and necessary clips/nut bolts or beads area exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make for item Nos. 36 to 39:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE. |
| 40 | S&F 75 mm size cold rolled mild steel medium weight butt hingescomplete all as specified and directed. |
| 41 | S&F 75 mm size cold rolled mild steel medium weight butt hinges including taking down existing hinge complete all as specified and directed. |
| 42 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. |
| 43 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section including taking down existing tower bolt complete all as specified and directed. |
| 44 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. |
| 45 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section including taking down existing tower bolt complete all as specified and directed. |
| 46 | S&F 125 mm long Aluminium alloy handles cast type anodised all as specified and directed. |
| 47 | S&F 125 mm long Aluminium alloy handles cast type anodised including taking down existing handle complete all as specified and directed. |
| 48 | S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed. |
| 49 | S&F 150 mm long Aluminium alloy handles cast type anodised including taking down existing handle complete all as specified and directed. |
| 50 | S&F 300mmlong aluminium alloy anodised sliding door bolts with hasp & staple (bolt type)and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed. |
| 51 | S&F 300mmlong aluminium alloy anodised sliding door bolts with hasp & staple (bolt type)and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including taking down existing sliding door bolt complete all as specified and directed. Make for Item No. 40 to 51: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE. |
| 52 | M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed byEngineer-in-Charge. |
| 53 | M&L preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed byEngineer-in-Charge. |
| 54 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth of CGI sheet in roof etc., and applying one coat of synthetic enamel paint (Corrugal) complete all as specified and directed byEngineer-in-Charge. |
| 55 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth of CGI sheet in roof etc., and applying two coats of synthetic enamel paint (Corrugal) complete all as specified and directed byEngineer-in-Charge. |
| 56 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth (other than in roof) and applying one coat of synthetic enamel paint complete all as specified and directed byEngineer-in-Charge. |
| 57 | M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed byEngineer-in-Charge. Make for Item No. 52 to 57: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/ NEROLAC |
| 58 | M&L preparing old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of creosote oil complete all as specified and directed byEngineer-in-Charge. |
| 59 | M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces,from surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge. Make: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM |
| 60 | M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying one coat of white washing complete all as specified and as directed by Engineer-in-Charge. |
| 61 | M&L for preparation of old plastered/unplasterd white washed surfaces of ceilings and applying one coat of white washing complete all as specified and as directed by Engineer-in-Charge. Make for item Nos. 60&61: LOVELYCEM/ SURYACEM/ JANATHACEM/ LUCKYCEM or equivalent make as approved by GE. |
| 62 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of distemper oil emulsion complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON |
| 63 | Sub Total of Schedule "A" |
| 64 | Schedule of Credit (Minus) Rs. 18,695.00 B/F from Ser page No. 28 NOTE: Bidder shall insert credit amount as rate Rs. 18,695.00 in Green field under Col-M.If bidder does not insert the amount the same will be deducted from total amount of Schedule "A" and accordingly total amount of tender will be considered in deciding the lowest tender. |
| 65 | Sub Total of Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
