|
| 1 | Earth work in bulk excavation by mechanical means (Hydraulic excavator) over areas exceeding 30cm in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, as directed by Engineer-in-charge, all kind of soils. |
| 2 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus be excavated soil within a lead of 50M from edge of cutting . disposed earth is to levelled and neatly dressed in all kinds of soil. |
| 3 | Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size)including all carriages and cost of material involved. |
| 5 | Providing and laying in position cement concrete of 1:2:4 mix (1 Cement: 2course sand: 4 graded crushed Stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level, incl carriage of all materials involved. |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor V level, including curing but excluding the cost of centering, shuttering, finishing and reinforcement with1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size). Including all carriages and cost of materials involved. |
| 7 | Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in beams, suspended floors, roofs, balconies, landings shelves, chajjas, lintels, bands, plain windows sills, and staircase having upto 15 degree slope including curing but excluding the cost of centring and shutteing all work upto floor V level including all carriages and cost of materials involved upto site of work complete. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all carriages and cost of material involved. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete. including all carriages and cost of material involved. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms. including all carriages and cost of material involved. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. including all carriages and cost of material involved. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide including all carriages and cost of material involved. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for columns, pillars, piers, abutments etc. including all carriages and cost of material involved. |
| 14 | Brick work with FPS bricks of class designation 75-A in super structure up to floor V-level In cement mortar 1:6 (1cement: 6 fine sand).Including all carriages and cost of material involved. |
| 15 | Structural steel work inbuilt up section , truss and framed work including cutting, hoisting, fixing in position using structural steel etc, as required and applying a priming coat of approved steel primer all complete including all carriages and cost of material involved. |
| 16 | Providing and fixing of Tile profile colour coated sheets of 0.5mm thickness and required colour fixd to supporting structure with 8mm dia GI, J/L hooks including ridges and valleys. including all carriages and cost of material involved. |
| 17 | Providing and fixing of 300mm x 40mm thick of budloo wood eaves boarding including cost of nails complete. |
| 18 | Providing and fixing of 12mm thick imported wooden paneling (T&G) including cost of 12mm thick ply wood or K D wood work in frame work, touch wood polishing and nails etc all complete as directed by EIC. |
| 19 | Providing and fixing of 50x50/2 mm thick wooden cornice of budloo wood including all carriages complete. |
| 20 | 15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement: 6 fine sand) including all carriages and cost of materials involved. |
| 21 | Supplying and filling of Nallah boulders under floors including leveling, dressing, watering, ramming and all carriages and royalty charges upto site of work complete. |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved |
| 23 | Providing and laying cement concrete flooring 50 mm thick 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete. Including all carriages and cost of material involved. |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 10mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material. |
| 25 | Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved. |
| 26 | Providing and fixing gang saw cut mirror polished (pre molded and pre-polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shades , colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 coarse sand) with joints filled with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing molding and polishing to edge to give high gloss finish etc. complete at all levels. Black granite 18mm thick.(As per the instructions of engineer in charge). |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats . including applying priming coat with ready mixed pink or grey primer finishing with knifing grey paste filler of approved brand and manufacture . |
| 28 | Finishing walls with water proofing Acrylic excel paint of approved brand and manufacture and of required shade to given an even shade new work two or more coats applied and includingpriming coat of exterior primer all complete. |
| 29 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved. |
| 31 | Dry random rubble masonry in foundation and plinth using quarry stone with bond stones. Including all carriages and costs of material involved. |
| 32 | Providing and Fixing of 16mm dia Truss bolts including necessary nuts and washers (300mm long) complete job. |
| 33 | Providing and fixing of following PVC fittings/ Pipes (Type –B) including trenching and refilling complete Job. (Standard make as approved by EIC) |
| 34 | PVC 100mm dia Pipe |
| 35 | PVC 100mm dia plain bend |
| 36 | 100mm dia Door bend |
| 37 | 100mm dia collar |
| 38 | 100mm floor trap |
| 39 | 100mm dia reducer |
| 40 | 75mm pipe |
| 41 | 75mm plain bend |
| 42 | 75mm door bend |
| 43 | 75mm collar |
| 44 | Providing and fixing of following PPR fittings / pipescomplete Job. (Standard make as approved by EIC) |
| 45 | 20mm dia Pipe |
| 46 | 16mm dia Pipe |
| 47 | 15mm stop cock |
| 48 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 course sand) with C. I cover and frame of size 450x450mm, foundation concrete 1:4:8 mix ( 1 cement: 4 course sand : 8 graded stone agg. 40mm nominal size) inside plastering 12mm thick cement mortar 1 : 3 ( 1 cement : 3 course sand) finishing with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone agg 20mm nominal size) finishing with floating coat of neat cement complete. Including all carriages and cost of materials involved. |
| 49 | Providing and fixing of following C P fittings of approved brand and make (Parko, Jaguar) or equivalent including all complete. |
| 50 | Angle valve |
| 51 | Bib cock long nose |
| 52 | Wall mixer |
| 53 | C P Nipple |
| 54 | C P Grating |
| 55 | C P Cup |
| 56 | Glass shelf |
| 57 | Soap case |
| 58 | Looking Mirror |
| 59 | Towel Rod |
| 60 | PVC Connection 450mm long |
| 61 | Sink Mixer |
| 62 | Providing and fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests. including all carriages and cost of material involved. |
| 63 | Providing and fixing of 50 ltr water heater Geyser of approved make like venus, Jupiton, Racold or equivalent make including all necessary fittings complete. |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer) |
| 65 | Providing and fixing factory made UPVC door frame made of UPVC Extruded section profile size 42x50mm, section having an overall dimension, as below (tolerance+/-1mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint mitred and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1mm +/-0.1mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers’ specifications and direction of engineer-in-charge) |
| 66 | 30mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm +/- 0.2mm with inbuilt decorative moulding edging on one sides. The styles and rails mitred and joined at the corners and by means of MS galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC hollow section of size 100x30mm and 2mm +/-0.2mm wall thickness fixed to the shutter styles by means of plastic/galvanized MS ‘U’ cleats. The shutter frame filled with UPVC multi-chambered single panels of size not less than 620mm, having over- all thickness of 20mm and 1mm +/- 0.1mm wall thickness. The pannels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized MS rod and fastened with nuts and washers, complete as per manufacturers’ specification and direction of engineer-in-charge |
| 67 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge complete. |
| 68 | Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 69 | Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm). |
| 70 | Providing and fixing ofkitchen sink size (600x450x250) with C.I brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. |
| 71 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 72 | Disposal of excavated soil beyond M. C limit by mechanical transport including loading and unloading all complete. |
| 73 | Providing and fixing of 25mm dia PVC conduit pipe (medium duty) including bends and pees etc all complete. |
| 74 | Providing and fixing of round concealed deep light junction box zinc coated including fixing all complete. |
| 75 | Providing and fixing of octagonal concealed fan box zinc coated including fixing all compete. |
