|
| 1 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc complete all as specified by Engr-in-charge. |
| 2 | M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces complete all as specified by Engr-in-charge. |
| 3 | M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified by Engr-in-charge. |
| 4 | M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement complete all as specified by Engr-in-charge. |
| 5 | Supply only integral water proofing compound ( ISI marked ) complete all as specified by Engr-in-charge. |
| 6 | M&L forthree coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified by Engr-in-charge. |
| 7 | M&L forthree coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified by Engr-in-charge. |
| 8 | M&L for preparation of new plastered surfaces of walls and applying two coats ofdistemper of approved tint complete all as specified by Engr-in-charge. |
| 9 | M&L for preparation of new plastered surfaces and applying two coats ofcement base paint of approved shade on walls all as specified & directedby Engineer-in-Charge. |
| 10 | M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed . |
| 11 | All as per item No 10 above but on ceiling complete all as specified by Engr-in-charge. |
| 12 | M&L preparation old plastered surfaces of wall and applying one coat oil bound distemper on walls directed complete all as specified by Engr-in-charge. |
| 13 | M&L for preparation of oldplastered surface & applyingtwo coats of oil bound distemper (OBD) over a coat of2mm thick wall putty complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified by Engr-in-charge. |
| 15 | M&L for complete removal of existing treatment of plastered surface of wall and apply two coats of cement base paint complete all as specified by Engr-in-charge. |
| 16 | M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of red ozide primer complete all as specified by Engr-in-charge. |
| 17 | M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified by Engr-in-charge. |
| 18 | M&L for preparation of old painted steel surfaces not exc. 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified by Engr-in-charge. |
| 19 | M&L for preparation of old painted surfaces of wood not exc.10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified by Engr-in-charge. |
| 20 | Preparation of olddecorated plastered surface of any description and applying one coat of plastic emulsion paint complete complete all as specified by Engr-in-charge. |
| 21 | Taking down chowkhat or frame not exc 1.5 sqm each (with out taking off shutters from the frame) complete all as specified by Engr-in-charge. |
| 22 | Taking down chowkhat or frameexc 1.5 sqm not exc 4 sqm each (without taking off shutters from the frame) complete all as specified by Engr-in-charge. |
| 23 | Taking down shutters of any description not exc.1 Sqm each complete all as specified by Engr-in-charge. |
| 24 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified by Engr-in-charge. |
| 25 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified by Engr-in-charge. |
| 26 | M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards complete all as specified by Engr-in-charge. |
| 27 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed by Engineer - in - Charge |
| 28 | M&L 35 mm thick 2nd class HW plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified by Engr-in-charge. |
| 29 | M/L 35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified by Engr-in-charge. |
| 30 | M/L 30mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified by Engr-in-charge. |
| 31 | M/L 30mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified by Engr-in-charge. |
| 32 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified by Engr-in-charge. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified by Engr-in-charge. |
| 34 | S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified by Engr-in-charge. |
| 35 | S&F in repair Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 36 | S&F in repair Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified by Engr-in-charge. |
| 37 | S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing.Frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified by Engr-in-charge. |
| 38 | M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm thick complete all as specified by Engr-in-charge. |
| 39 | S&F 100 mm size cadmium plated stainless steel butt hinges and fixed with stainless steel screws, complete all as specified by Engr-in-charge. |
| 40 | M&L butt hinges, medium weight 75 mm long size complete all as specified by Engr-in-charge. |
| 41 | S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long complete all as specified by Engr-in-charge. |
| 42 | S&F Aluminium handle cast type anodised 150 mm long complete all as specified by Engr-in-charge. |
| 43 | S&F 125mm size aluminium handles,cast type,anodised complete all as specified by Engr-in-charge. |
| 44 | S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) complete all as specified by Engr-in-charge. |
| 45 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified by Engr-in-charge. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame includingpunching or drilling out old glazing pins/spring clips and providingfixing new ones complete all as specified by Engr-in-charge. |
| 47 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed. |
| 48 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified by Engr-in-charge. |
| 49 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacksor galvanised wire complete all as specified by Engr-in-charge. |
| 50 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified by Engr-in-charge. - |
| 51 | M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified by Engr-in-charge. |
| 52 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified by Engr-in-charge. |
| 53 | Dismantling timber scantling 40 sq.cm and over in section, in any position in framed work complete all as specified by Engr-in-charge. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified by Engr-in-charge. |
| 55 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified by Engr-in-charge. |
| 56 | S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,for cup board including lipping / beading as required complete all as specified by Engr-in-charge. |
| 57 | M&L for external teak wood lipping 6 mm thick , fixed with nails on particle board 12 mm thick complete all as specified by Engr-in-charge. |
| 58 | S&F Solid PVC wall lining consisting of 5mm thick plain ,colour PVC sheet inclusive of sovent cement and fixing at site on PVC frame as per specification and drawing complete all as specified by Engr-in-charge. |
| 59 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified by Engr-in-charge. |
| 60 | S&F4mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on onefaces; fixed with screws to timber frame work as wall panel complete all as specified by Engr-in-charge. |
| 61 | M&L for preparation surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified by Engr-in-charge. |
| 62 | M&L for preparation new untreated surfaces of any description, over 10 cm in width or girth for staining with finishing coat with synthetic varnish complete all as specified by Engr-in-charge. |
| 63 | S&F 2nd class hard wood plain fillets square, rectangular or traingular in section area exc 13 Sq cm & n.exc 25 Sq cm , clean sawn, secured with nails or brads complete all as specified by Engr-in-charge. |
| 64 | All as per item No 63.00 herein but bullnosed, splayed chamfered or rounded on one edge or face complete all as specified by Engr-in-charge. |
| 65 | S/F 2nd class hard wood scantling as in purlins rafters ,& framed worketc clean sawn complete all as specified by Engr-in-charge. |
| 66 | M&L for rolled sections as in framing for clazing and the like fixed with angles cleats and connecting plates with timber foer eaves board complete all as specified by Engr-in-charge. |
| 67 | Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed of CM 1:4 incl roughening surfaces of old concrete floor by pricking and washing down with water complete all as specified by Engr-in-charge. |
| 68 | Ditto all as per item no 67.00 above but as in skirting over and including 10mm thick cement plaster in CM (1:4) and ditto complete all as specified by Engr-in-charge. |
| 69 | Material and labour for non skid ceramic coloured tiles7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified by Engr-in-charge. |
| 70 | Material and labour for non skid ceramic coloured tiles7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified by Engr-in-charge. |
| 71 | Vitrified Ceremic tiles 10mm thick (Square/Rectangular) polsihed, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement sluryy and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4), roughening of surface and washing down with water complete all as specified by Engr-in-charge. |
| 72 | Material and labour for glazed ceramic coloured tilesof size 300x200x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified by Engr-in-charge. |
| 73 | Material and labour for glazed ceramic coloured tilesof size 350x250x7mm/450x350x7mmthick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified by Engr-in-charge. |
| 74 | Material and labour for 20-25 mm thick machine cut kota stone slab over and including 20mm thick screed bedin cement mortar (1:4)with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified by Engr-in-charge. |
| 75 | Material and labour for 20-25 mm thick machine cut kota stone slab on verticle surface as skirting/dado over and including 10mm thick cement plasterin cement mortar (1:4)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified by Engr-in-charge. |
| 76 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20 mm thick screed bed (bedding layer) in CM 1:4, complete all as specified by Engr-in-charge. |
| 77 | M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified by Engr-in-charge. |
| 78 | M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified by Engr-in-charge. |
| 79 | Material and labour for preparation of old woodensurfaces of any description over 10 cm width or girthand applying one coat of synthetic enamel paintcomplete all as specified by Engr-in-charge. |
| 80 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified by Engr-in-charge. |
| 81 | M&L for anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engr-in-charge. |
| 82 | M&L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified by Engr-in-charge. |
| 83 | M&L for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified by Engr-in-charge. |
| 84 | Of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1 :2 (1 Cement :2 Course sand) to match the existing floors complete all as specified by Engr-in-charge. |
| 85 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed GI powder coatedgrid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified by Engr-in-charge. |
