|
| 1 | Dismantling doors, windows and ventilators having area lessthan 3.0m2 including removal of frames, fastening etc. from masonry and handing over to Chief Engineers Representative byshifting& stacking at Maintenance Section office Yard at Headlandas directedincluding all tools & plant labour & material complete. |
| 2 | Providing and fixing wood work in frames of doors, windows, ventilators etc. with well seasoned sal wood including m.s. holdfast 40 mmx 25 cmlong 6 nos. embedded in c.c. (1:3:6) blocks,16 mm dia m.s. bottom pins including necessary painting primer and two coats of synthetic enamel paint). All tools, plants, labour & material etc. complete. (New frames) |
| 3 | Providing and fixing in position Windows having two or moreshutters without ventilator panelled and glazed with 3 mm thick glass panes with 40 mm thick sal wood shutter with all stainless steel fittings like butt hinges 4 nos. 100x58x1.8 mm size screwed to frame and embedded in cc (1:3:6) block all putty, beading etc. including necessary primer and two coats of synthetic enamel paint. All tools , plant labour & material etc. complete. ( new frames) |
| 4 | P/Fin position anodised aluminium louveredventilators in single vertical bays with 4.00 mm thick 100 mm wide frosted glass louvers of approved quality / make using best quality standard extra lead anodised aluminium sections comprising to IS-733, frame shall have groove to receive weather strip all around, glass louvers shall have PVC gap closing gasket on top edge of louvers and approved through lever handle and operation fixed to outer frame and aluminium handle locking device, fixing to masonry, R.C.C. columns etc. as specified by manufacturer all gaps should be sealed with approved sealant etc. including finishing and making good the surface with cement concrete mortar, touch up painting, removing of old ventilators etc. All tools, plant labour & material etc. complete. |
| 5 | P/F ornamental Grills of approved pattern using m.s. flats 25 mm x3 mmor any other sections including welding, grinding, cutting, drilling holes, fixing with counter sunk screws etc.. All tools , plant labour & material etc. complete. |
| 6 | Supplying and fixing Flush doorshutters35mm thick both side commercial faced including providing 4 nos. S.S. hinges (100x70x4) mm minimum size teakwood beading patties, brass screws, including necessary painting primer and two coats of synthetic enamel ) all tools , plant labour & material etc. complete. (Old fittings like mortice lock, safety chins, etc.to be refitted to the (new door). All tools, plant labour & material etc. complete. |
| 7 | Supplying and fixing Flush doorshutters (Main door) of marine solid core 35mm thick both sides teakfaced including providing 4 nos. S.S. hinges (100x70x4) mm minimum size teakwood beading patties, brass screws, polishing etc. Completeall tools , plant labour & material etc. complete. (Old fittings like mortice lock, safety chins, etc.to be refitted to the new door. All tools , plant labour & material etc. complete. |
| 8 | Providing and Fixingthe following heavy anodised aluminium/Stainless steel as specified to the wood work as directed including required screws and fastening. All tools, plant labour & material etc. complete. |
| 9 | a) anodised aluminium Plate type hook & Eye 10cm long |
| 10 | b) anodised aluminium Plate type hook & Eye 15cm long |
| 11 | c) anodised aluminium Tower Bolt 25 cm long |
| 12 | d) anodised aluminium door latch 30 cm long |
| 13 | e)anodised aluminium tower bolt 15 cm long |
| 14 | f)anodised aluminiumdoor latch 20 cm long |
| 15 | g)anodised aluminiumbaby latch |
| 16 | h)anodised aluminium D-type door handle 10 cm long |
| 17 | i)s.s. butt hinges 100 mmx70mmx4.0 mm |
| 18 | j)s.s. butt hinges 75mmx40mmx2.5 mm |
| 19 | k)s.s. butt hinges50mmx37.5mmx1.5 mm |
| 20 | Supplying and fixing FRPdoor shutterswith frames Om ventures make or any other approvedmake/quality and of approved colour, shade in single leaf with 29-30 mm thickness, including all the accessories such as C.P.brassbutt hinges of size 100 x 70x4.0 mm, minimum 3 nos. per shutter, fixed buy C.P. brass counter sunk as approved and fixed to the door frame as specified by the manufacturer or as directed complete. All tools, plant labour & material etc. complete. |
| 21 | Supplying & fixing Automatic door closer \"Universal\" 65 of \"Everite\" EDC 1103 including necessary screws, washers etc. All tools, plants, labour & materials complete. |
| 22 | Providing & fixing in position anodised aluminium sliding windows of approved manufacturer to suit two track/ three tracksliding, using best quality standard extruded anodised aluminium sections (manufactured to relevant I.S. specification) without horizontal glazing bars, glazed with 5.5.mm thick sheet glass fixing to RCC column/masonry with lugs of 16mm x 3.15mm x 10cm long or any other approved size embedded in C.C. (1:3:6) blocks of appropriate size incl. necessary bolting devices, handles, locking arrangements, fixing clips, metal putty, PVC/Rubber beading etc.All labour & material etc. complete. ( Anodised/ powder coated) |
| 23 | Supplying & erecting structural steel work for trusses, purlins, rafters etc. incl. All Cutting, fabricating, welding & fixing in position, painting with two coats of synthetic enamel paint over a coat of red oxide zinc chromite primerafter cleaning & preparing the surface etc. All tools, plants, labour & materials etc. complete |
| 24 | Supplying & fixing mosquito proof nettingof Netlon or any other approved brand to the windowswith Velcro tape fixing to window frame withrequired screws nails .. etc.. And stitching of other part of Velcro to the net including all tools & plant labour & material complete. |
| 25 | Repairs to the aluminium frame glass window including removing the glass, replacing damaged rubber beading with new rubber beading, refixing of glass to the aluminium frame, cleaning, repairs/replacing bearings/rollers , applying sealant to the joints of aluminium and masonry,etc.complete as directed. All labour and material, tools & plant etc. complete. |
| 26 | Providing aluminium handles forthe aluminium frame glass window as directed and approved . All labour and material, tools & plant etc. complete. |
| 27 | Providing 5.00 mm thick glass for the aluminium frame window/door, including removing the damaged glass, replacing the damaged beading, sealing the gaps in between wall and window frame using M seal, touch up paintingas directed. All labour and material, tools & plant etc. complete. |
| 28 | Providing 4.00 mm thick pin headed/plainglass for louvered ventilatorsas directed. All labour and material, tools & plant etc. complete. |
| 29 | Providing and fixing double action hydraulicfloor spring of approved brand and manufacturer including pivot for Aluminium shutter, cutting of floor ,embedding in floor as requiredand making good same matching to the existing floor finishing and cover plates ..etc. as directed. All labour and material, tools and equipmentetc. complete. |
| 30 | Supply of Labourson dailybasisincluding necessary minor tools and plant for execution of maintenance works in the Port as directed. All labour and minimum essentialtools etc. complete. |
| 31 | Skilled Labour( carpenter ,fitter ..etc.) 8 hours a day |
| 32 | Unskilled Labour 8 hour a day |
| 33 | Supplying & fixing asbestos cement corrugated sheets 6mm thick in roofing including cutting/mitering,drilling holes, fixing with necessary G.I. bolts, nut G.I. and bitumen washers etc. as directed. All labour and material, tools & plant etc. complete |
| 34 | Supplying & fixing A.C. plain adjustable ridges including drilling holes, necessary G.I. holes, nuts, G.I. and bitumen washers etc.as directed. All labour and material, tools & plant etc. complete. |
| 35 | Supplying & fixing corrugated translucent fibre glass sheets1.5 mm including cutting to required size, drilling holes and fixing with necessary \"J\" bolts, seam bolts, bitumen and plain washers etc. as directed. All labour and material, tools & plant ,scaffolding etc. complete. |
| 36 | Supplying & fixing Mangalore pattern tiles (Double inter locking Fort Brand roofing tile no.1/equivalent) in single layer over Sal/Jamba wood reapers 5 x 2.5cm including supplying & fixing ridge tiles, pointing with C.M. (1:2) and painting reapers with creosote oil etc.as directed. All labour and material, tools & plant scaffoldings etc. complete. |
| 37 | Supplying & fixing Mangalore pattern tiles (ordinary Mangalore tiles) in single layer over Sal/Jamba wood reapers 5 x 2.5cm including supplying & fixing ridge tiles, pointing with C.M. (1:2) and painting reapers with creosote oil etc.as directed. All labour and material, tools & plant ,scaffolding ..etc.complete. |
| 38 | Supplying & fixing G.I. eaves gutter 15cm dia using 0.8mm thick plain G.I. sheets, cutting, bending necessary brackets, seam bolts, G.I. washers & 2 coats of tarring etc. as directed. All labour and material, tools & plant, scaffoldingetc. complete. |
| 39 | Providing roofing compound to the bolt, along the cracks of sheets, joints of asbestos sheet roofing as directed. All labour and material, scaffolding ,tools & plant etc. complete. |
