Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Staff quarter(Small)Demolishing of brick work including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels. |
| 2 | Dismantling of wood work in frames, truss, purlins and rafter etc. including stacking the materials as directed by the Department. |
| 3 | Dismantling of all type of corrugated /trapezoidal sheet roofing including ridging hips, valley and gutter etc. and stacking of the materials as directed by the Department. |
| 4 | Providing pre painted galvalume sheet roofing at all level including fitting and fixing self drilling, self tapping screws complete. (TATA blue scope/Dyna roof/wander roof or equivalent as directed by the department) iii) 0.50 mm thickness |
| 5 | Providing pre painted galvalume sheet accessories(Ridges/Valley/Gutter at all level includingfitting and fixing self drilling, self tapping screws complete. Tata blue scope/Dyna roof/wander roof or equivalent as directed by the department iii) 0.60 mm thickness |
| 6 | Providing wood work in frames(Chowkaths) of Door, window, clerestory window and other similar works wrought, framed and fixed in position in contact with c.c or bricks work or brick masonry works (b) 1st class timber (bonsum/sundi) |
| 7 | Providing fitting fixing full paneled door /window including oxidized MS butt hinges with necessary screws(other fittings to be paid separately) B) With 1st class local wood(Gamari/Bonsum/Hollock)(i) 40 mm thick |
| 8 | 112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed inin super structure above plinth up to first floor level (protruding M.S. rod / Tor steel of column to be embedded in cement mortar and will be measured and paid separately)a) In cement mortar in proportion 1:4 |
| 9 | 15 mm thick. cement plaster in singlecoatson roughside of single or half brickwallsfor interior plastering up to 1st floor level including arises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed.(A) On rough side b) In cement mortar 1:4 |
| 10 | (B) on fair sidec)In prop 1:4 |
| 11 | Providing wood work in frames of false ceiling partition etc sawn , wrought, framed hoisted and fixed in position with spikes , nails, M.S flat , angles cleats etc. complete(b) With Gamari/Bonsum/ Sundi |
| 12 | Providing fitting and fixing in position with 6 mm thick Bison panel(Cement bonded particle board) on timber frame of 1st class local wood (Hollock/ Bonsum/Sundi) of 50mmx80mm spaced at not more then 1.20m apart fixed to the wall at the end with necessary nails, screws including one coat of priming and two coats of painting as directed by the Deptt.(A) One side laminated |
| 13 | Supplying fitting fixing brass fitting and approved make reasonably smooth, free from sharp edges and corner and corners and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete.(a) Sliding door bolt(i) 300mmx16mm |
| 14 | (b) Tower bolt(i) 300mmx16mm |
| 15 | (d) Gate shutter hook & eye(i) 10mm |
| 16 | Applying priming coat over new wood based surfaces up to 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil ,grease, dirt and other foreign matters ,sand papering and knotting (a) with ready mixed wood primer (pink). |
| 17 | Painting twocoat over new wood based surfaces up to 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil ,grease, dirt and other foreign matters ,sand papering and knotting (i) Surfaces over 100 mm in width or girthb) Hi gloss (Asian paint/Berger Paint/ICI/J&N paint /Nerolac) |
| 18 | Removing of old paint or polish from wood and wood based surface with paint remover of approved brand and manufacture and making the surface even. |
| 19 | Providing fitting fixing full glazed clerestory window and fan light including fitting fixing 2 nos pivot hinges , eye bolt, hooks complete(Glass panes to be measured and paid separately)B) With Hollock/ Bonsum/Gamari wood(i) 40 mm thick |
| 20 | Providing one coat of Distemper primer of approved brand and manufacture on wall surface after thoroughly brooming the surface from mortar dropping and other foreign materials. |
| 21 | Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface to give an even shade after thoroughly brushing the surface from mortar dropping and other foreign matter including preparing the surface even and prepared smooth. |
| 22 | Removing dry oil bond distemper by washing scraping and sand papering the wall surface smooth including necessary repairs to the scratches complete. |
| 23 | Distempering with dry distemper of approved brand and manufacture (one coats) and of required shade on new wall surface to give an even shade after thoroughly brushing the surface from mortar dropping and other foreign matter including preparing the surface even and prepared smooth. |
| 24 | Extra over item no (f), (g) and (h) above for distempering every subsequent coat of distemper with dry distemper of approved brand and manufacture. |
| 25 | a) Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth. |
| 26 | Finishing wall with water proofing cement paint of approved manufacture on new wall surface thoroughly brooming the surface free from dust and dirt and to give the surface an even shade. |
| 27 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on old wall surface (two coats) thoroughly brooming the surface free from dust and dirt and to give the surface an even shade. |
| 28 | Extra over item no (b) and(c) above for every subsequent coat of water proofing cement paint of approved brand and manufacture. |
| 29 | Providing and fixing clear sheet glass bedded in putty and fixed with /without wooden beading including necessary cutting etc. complete.(1) Area of glass panes not exceeding 0.15 Sqm(a) 3.00 mm thick |
| 30 | Providing barge board of size 200mmx20mm with 1st class local Hollock/Bonsum timber including fitting fixing with necessary wood screws etc. complete. |
| 31 | Applyingpriming coat over new wood based surface up to 100 mm in girth /width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign mater sand papering and knotting.(a)With ready mixed paint wood primer(pink) |
| 32 | Painting two coats (excluding priming coat) on new wood based surface with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint) to give an even shade.Qtty. Same as item no above = 175.48 RM |
| 33 | Providing fitting and fixing M.S grill of required pattern for window, C/W, opening with M.S flats at required spacing in frames.II) Ornamental grill(C )Fixed to Brick work/ R.C.C/P.C.C |
| 34 | Applying primary coat over new steel and other metal surfaces up to 100 mm in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper.a) With ready mixed red lead red oxide primer |
| 35 | Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J & Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .(I) Surfaces over 100 mm in width or girth(b)High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)Quantity same as above itemie. 4.62 Sqm |
| 36 | Synthetic enamel paint, aluminum paint/bituminous paint on steel and other metal surface removing old paint from steel and metal surface and making the surface even.(a) With hand scrapping |
| 37 | Painting one coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J & Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .(I) Surfaces over 100 mm in width or girth(b)High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)Quantity same as above itemie. 14.90 Sqm |
| 38 | Providing and fixing 12 mm thick and 150 mm wide pelmet with 25mm dia wooden curtain rod and bracket including fixing with 15 mm x3mm M.S flat 100mmlong plugs complete.a) Veneered particle board (12mm thick) |
| 39 | Sanitaryworks Providing fitting and fixing vitreous China pedestal type water closet (European type W.C. pan 400mm high) with seat and lead , CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required(Flushing cistern to be paid separately)(A)Parry ware make b)Coloredii) Combination closet S Trap(Cat No C0205) inclusive of seat cover. |
| 40 | Supplying fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (pipe will be paid separately)ii) Parry ware make b) color(i) Deluxe single Flush (Cat No C8091/C8097) |
| 41 | Providing fitting and fixing vitreous china wash basin with CI/MS bracket, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets cutting and making good the walls and floors wherever required.A) Parry ware Make (iii) Qube600x460 (Cat. No. C844D/G) white/colored |
| 42 | Providing fitting & fixing stainless steel kitchen sink of parry ware make with CI/MS bracket, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required.ii) Single Bowl with drain Board(400x200) flat edge- glossy(Cat. No. C8537) |
| 43 | Providing fitting and fixing Mirror with plastic frame of size 500x400 complete as directed and specified. |
| 44 | Providing fitting and fixing recessed soap tray /soap dish complete as directed A) Parry ware Make(i) Reses SP & SG dish (Cat. No. C9935) |
| 45 | Providing fitting and fixing CP Towel rail complete as directed and specified (a) Jaquar makei) Continental 600mm long with hanger(Cat. No. CAN 1181N) |
| 46 | Providing fitting fixing Chromium plated waste coupling complete as directed and specified. a) Jaquar make.(i) 32 mm (HT/FT) Cat No. ALD.705/709 |
| 47 | Supplying and fitting ,fixing PVC pipes of 6kg/cm2 (Supreme/Prince) or any other ISI approved brand including joining, fitting, and fixing with clamps etc as necessary complete at all levels including below G.L as directed and specifieda) Exposed or in trench ii) 110 mm dia |
| 48 | iv) 75 mm dia |
| 49 | Supplying fitting andfixing PVC single “Tee” with door of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed or in trench ii) 110 mm dia |
| 50 | Supplying fitting andfixing PVC single “Y” with door of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.b) In exposed or in trench ii) 110 mm dia |
| 51 | Supplying fitting and fixing PVC coupler of (Supreme/Prince or either ISI approved including joining ,fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and Specified.a) In exposed or in trench i) 110 mm dia |
| 52 | ii) 75 mm dia |
| 53 | Providing fitting and fixing PVC Cowl with ISI make complete as directed and specified.i) 110 mm dia PVC cowe of ISI make |
| 54 | WS & S worksSupplying fitting fixing approved U PVCpipes of different sizes , with all necessary “R” brand or similar approved P.V.C. fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting,,clamps etc. complete at all levels including below G.L. as directed and specified.(A) In exposed or in trench.C) 32 mm dia |
| 55 | b) 40 mm dia |
| 56 | Supplying fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified ( G.I. & C.P pipes will be measured separately) II) Jaquar make, a) Continental/ Clarion, I) Standard |
| 57 | Supplying fitting and fixing Chrome plated (C.P.) stop -cock of approved brand and size as mentioned below as directedand specified ( G.I. & C.P. pipes will be measured and paid separately) I) Jaquar, (a) Continental /Clarion, (ii) 15 mm dia ( Angular stop cock) |
| 58 | Supplying and fitting fixing C.P. pillar cock of 15 mm dia of approved brand as specified and directed. ii) Jaquar make a) Continental /Clarion -pillar cock with aerator |
| 59 | Sup[plying fitting fixing C.P. sink cock of approved as directed and specified below(ii) Agmeco brand a) Sink cock casted swivel spout. |
| 60 | Internal Electrification worksWiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. completea) Short Point up to 3 Mtr length |
| 61 | b)Medium point up to 6.00mtr length |
| 62 | c)Long point up to 10.00mtr length |
| 63 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.With 2x2.5sqmm +earth continuity with 1x1.5sq mm in flat 19 mmISI marked casing n capping system |
| 64 | With 2x4 sqmm +earth continuity with 1x2.5sq mm in flat 19 mmISI marked casing n capping system |
| 65 | With 2x2.5sqmm +earth continuity with 1x4 sq mm in flat 19 mmISI marked casing n capping system1x10.00 = 10.00 RM |
| 66 | Wiring to 5pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark withphenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Short point up to 3.00 m length |
| 67 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessedconduit wiring system includingand fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switchboard (I.S.I. mark withphenolic laminated sheet cover earth continuity with 2.5 sq. mm cableto the 3rd pin of the socketas required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)Long point up to10.00mtr length |
| 68 | Supplying and fitting of polished Brass Bracket of 18 SWG 25 CM long cast back plate and brass lamp[ holder complete including connection as approved by the Deptt as required(without lamp) |
| 69 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories as approved by the Department as required (Without lamp) |
| 70 | Supplying and fitting of 18/20 watt CFL lamp in the existing batten holder/ angle holder /decorative bracket/ bulk head as specified. |
| 71 | Supplying fitting and fixing Call bell (Buzzer) including 5/6 Amp capacity button piano type bell push switch including connection as approved by Dep[tt as required. |
| 72 | Supplying with fitting and fixing sheet steel, phosphaited, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.4way SPN Double door |
| 73 | Supplying with fitting and fixing single pole 10KA 240/ 415V 50HZ MCB of the following capacity complete with necessary connection as specified and directed by the deptt.B. Series6to 32 A |
| 74 | Supplyingfitting and fixing DP 10 KA 240/415 v 50 HZ MCB of the following capacity complete with making necessary connection as approved by the Deptt. B Series Schneider M.G. LEGRAND, HEGER,GRABTREE,XPRO make63 A |
| 75 | Installation of Earth station with 40mm dia . And 4.50 metre long G.I. pipe with necessary G.I. reducing socket 40 mm x20mm size locking arrangement with hinged cover plate, funnel, G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosure on the top etc. as required complete. |
| 76 | Extra for using salt (5 kg) and Charcoal (64 kg for pipe earth electrode as required. |
| 77 | Supplying and laying 8 S.W.G. Copper wire at 0.50 metre below ground level for conductor earth electrodes including soldering, excavation work and refilling etc. as required complete. |
| 78 | Premium model1400 mm Sweep. (ORIENT PSPOmake) /Premium model1400 mm Sweep SS-390 Deco. Havellsmake) |
| 79 | Supplying fitting fixing of ceiling fan regulator including connection etc. complete as directed Electronic Type |
| 80 | (ECBC) Supplying, installation, testing and commissioning of following LED luminaries complete with all accessories such as driver etc. directly on wall/ ceiling including connection with 1.5 Sqmm P.V.C. insulated S.C. copper conductor as required and as directed by the Deptt.LED lamp indoor application operating voltage 90v – 250v -12v DC 1 model 9N-111-2 or equivalent LED lamp with main input(Make Phillips, Bajjaj, Schneider, Havells. |
| 81 | Approach RoadEarth work in excavation for foundation trenches of walls, retain -in walls, footings of columns, steps, septic tanks etc. includingrefilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering andramming etc. and removal of surplus earth with all leads and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified.Up to a depth of 2m below the existing ground level .a) In ordinary soil |
| 82 | Providing Soiling in foundation & under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed.a. Brick on flat soiling |
| 83 | Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brickwork etc. as directed and specified including dewatering ifbe measured and paid separately)a) In Prop. 1 cement : 3Sand : 6Coarse agg. by volume |
| 84 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floorto ceiling not exceeding 4 m and removal of the same for in situ reinforced cement concrete and plain concrete work inColumn, pillar, posts etc.Sides of tie beams, graded beams etc. at or below ground level.(b) Using 25 mm thick plank |
| 85 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. completeb)Other ISI approved TMT reinforced bars |
| 86 | Providing and laying plain/reinforced cement concrete work withcoarse sand &20 mm down graded stone aggregateincluding dewatering if necessary and curingcomplete supply of materials but excluding cost of form work and reinforcement ( form work andreinforcement will be measured and paid separately )Using mixture machineA)In sub-structure up to plinth level.Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.N) Without using admixture plasticizer a) M15 grade concrete or Prop 1:2.4 |
| 87 | Granular sub-base /base /surface course with local materials(table 400) by mix in place method normal construction of granular surface by providing local materials spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at onceand compacting with smooth wheel Roller to achieve the desired density completed as per clause 401.4 as per technical specification 408a) Usinggrading –I materials |
| 88 | Providing SUN ROCK HIGH CTS/Devi paver block/tiles of grade M30 or above of approved quality, size, shape of specified thickness over a leveling bedding layer of 30 mm compactedsand over a base course of WBM or PCC including cutting where necessary finished with spreading, sweeping, jointing sand and compacting the pavers using vibrating compactor as specified and directed.SUN ROCK HIGH CTC/Devi Tiles(pavers)( C) 50 mm thick. |
| 89 | 15 mm thick. cement plaster in singlecoatson roughside of single or half brickwallsfor interior plastering up to 1st floor level including arises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3 |
| 90 | Staff quarter(Big)Dismantling of wood work in frames, truss, purlins and rafter etc. including stacking the materials as directed by the Department. |
| 91 | Dismantling of all type of corrugated /trapezoidal sheet roofing including ridging hips, valley and gutter etc. and stacking of the materials as directed by the Department. |
| 92 | Dismantling and removing the existing door and window frame both wooden and steel of different sizes without damaging the walls and removing the frames and necessary repairs to the edges to the walls(i)Area of door/window up to 3.00 Sqm |
| 93 | Demolishing C.C. floors of various thickness including top layers and base course and disposed of debris as directed for all debris as directed for all levels. |
| 94 | Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all leads and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified.A) Up to a depth of 2m below the existing ground level.a) In ordinary soil |
| 95 | Providing Soiling in foundation & under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed.a. Brick on flat soiling |
| 96 | Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brickwork etc. as directed and specified including dewatering ifbe measured and paid separately)a) In Prop. 1 cement : 3Sand : 6Coarse agg. by volume |
| 97 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. completeb) Other ISI approved TMT reinforcement bar(SRMS/SAI/BISCON/X-Tech) |
| 98 | c ) ISI approved mild Steel reinforcement bar |
| 99 | Providing form work of 12 mm thick ply board shuttering so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floorto ceiling not exceeding 4 m and removal of the same for in situ reinforced cement concrete and plain concrete work in |
| 100 | Providing and laying plain/reinforced cement concrete work withcoarse sand &20 mm down graded stone aggregateincluding dewatering if necessary and curingcomplete supply of materials but excluding cost of form work and reinforcement ( form work and reinforcement will be measured and paid separately )I)Using mixture machinei)In sub-structure up to plinth level.Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.N) Without using admixture, plasticizerc) M 15 grade concrete or Prop 1:2:4 |
| 101 | B)In super structure from plinth level.ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band , beam, girder, cantilever, staircaseincluding preparing of top surface and finishing of nosing.N) Without using admixture, plasticizera) M 15 grade concrete or Prop 1:2:4 |
| 102 | Brick work in cement mortar with 1st class brick including racking outjoints and dewatering if necessary and curing complete as directed in sub structure up to plinth level.I) In sub- structure up to PLa) In prop 1:4 |
| 103 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed inin super structure above plinth up to first floor level (protruding M.S. rod / Tor steel of column to be embedded in cement mortar and will be measured and paid separately)(A) 112 mm thick brick wallc) In cement mortar in proportion 1:4 |
| 104 | 15 mm thick. cement plaster in singlecoatson roughside of single or half brickwallsfor interior plastering up to 1st floor level including arises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed.a) In cement mortar 1:3 |
| 105 | b) on fair side |
| 106 | Earth/Sand filling in plinth in layers not more than 150 mm thick.including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes as may be necessary(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. |
| 107 | 65 mm thick cement concrete floor consisting of 50 mm thick under layers of cement concrete in proportion 1:3:6 |
| 108 | Providing ceramic tiles of approved quality , size, shape and thickness not less than 8mm on floor`, skirting over cement mortar bed 15mm thick as directed C) Deluxe rangei) of size 300mmx450mm and above |
| 109 | Providing polished ceramic wall tiles of approved quality , size, shape and thickness not less than 8mm on walls and skirtingC) Delux rangei) of size 300mmx450 mm and above |
| 110 | Providing undressed wood work in roof truss, rafter, purline tie including hoisting and fixing in position with necessary spikes , nails, M.S straps with bolts and nuts.(b) With Hollock/ Bonsum/ Sundi /Sam |
| 111 | Providing pre painted galvalume sheet roofing at all level including fitting and fixing self drilling, self tapping screws complete. (TATA blue scope/Dyna roof/wander roof or equivalent as directed by the department) iii) 0.50 mm thickness |
| 112 | Providing pre painted galvalume sheet accessories(Ridges/Valley/Gutter at all level includingfitting and fixing self drilling, self tapping screws complete. Tata blue scope/Dyna roof/wander roof or equivalent as directed by the department iii) 0.50 mm thickness |
| 113 | Providing, fitting and fixing 40mmx48mm wood reinforced PVC chowkaths fixed to columns/stiffers/walls with necessary holdfast /sleeves etc as specified and directed. |
| 114 | Providing ,fitting & fixing 24mm/29mm thick polymer reinforced moulded PVC door shutter fixed to the choukaths with necessary hinges, screws, bolts etc. as specified and directedb) 29mm thick |
| 115 | Providing fitting fixing full paneled door /window including oxidized MS butt hinges with necessary screws(other fittings to be paid separately) B) With 1st class local wood(Gamari/Bonsum/Hollock)(i) 40 mm thick |
| 116 | Providing fitting fixing full glazed window wirh sash bars including oxidized MS butt hinges 2 nos on each leaf(glass panes to be measured & paid separately) B) With 1st class local wood(Gamari/Bonsum/Hollock)(i) 40 mm thick |
| 117 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bedding (I) Area of glass panes not exceeding 0.15 Sqma) 3.00 mm thick |
| 118 | Providing fitting and fixing in position with 6 mm thick Bison panel(Cement bonded particle board) on timber frame of 1st class local wood (Hollock/ Bonsum/Sundi) of 50mmx80mm spaced at not more then 1.20m apart fixed to the wall at the end with necessary nails, screws including one coat of priming and two coats of painting as directed by the Deptt. d) One side laminated |
| 119 | Providing fitting and fixing M.S grill of required pattern for window, C/W, opening with M.S flats at required spacing in frames.II) Fixed to Brick work/ R.C.C/P.C.C |
| 120 | Cement plaster skirting with cement mortar in prop 1:3 finished with a floating coat ofneat cement finish including curing complete.e) 20 mm thick |
| 121 | 25 mm thick cement conc top[ping in 1:2:4 finished with a floating coat of neat cement finish including curing complete.Total floor area – 41.74 Sqm |
| 122 | a) Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.Walls |
| 123 | b)Finishing wall with water proofing cement paint of approved brand and manufacture to give an even shade on new wall. |
| 124 | Distempering with dry distemper of approved brand and manufacture (one coats) and of required shade on new wall surface to give an even shade after thoroughly brushing the surface from mortar dropping and other foreign matter including preparing the surface even and prepared smooth. |
| 125 | Applying priming coat over new wood based surfaces up to 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil ,grease, dirt and other foreign matters ,sand papering and knotting (b) with ready mixed wood primer (white). |
| 126 | Applying painting twocoat over new wood based surfaces up to 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil ,grease, dirt and other foreign matters ,sand papering and knotting (i) Surfaces over 100 mm in width or girthb) Hi gloss (Asian paint/Berger Paint/ICI/J&N paint /Nerolac). |
| 127 | Painting one coat (Excluding priming coat) on old wood and wood based surface with enamel paint to give an even shade.(i) Surfaces over 100 mm in width or girth.b) High gloss (Asian paint/Berger paint/ICI paintetc.) |
| 128 | Providing plinth protection with brick flat laid incement mortar in prop 1:4 finishingwith a floating coat of neat cement finish. |
| 129 | Providing drain with cement concrete (1:3:6) 10 cm thick sides 10 cm thick bed over brick flat soling 15 mm thick cement plastering in prop1:3 finished with a floating coat ofneat cement finish including curing complete.ii) 300 mm wide and average 250 mm depth with bed slop 1:150 |
| 130 | Providing barge board of size 200mmx20mm with 1st class local Hollock/Bonsum timber including fitting fixing with necessary wood screws etc. complete |
| 131 | Applying priming coat over new wood and wood based surface up to 100 mm in girt/width after and including preparing the surface by thoroughly cleaning the surface from all dust, dirt and other foreign matter. |
| 132 | Painting two coats(Excluding priming coat) over new wood and wood based surface up to 100 mm in girt/width after and including preparing the surface by thoroughly cleaning the surface from all dust, dirt and other foreign matter. |
| 133 | Internal water supply & Nanitary worksSupplying fitting fixing approved U PVCpipes of different sizes , with all necessary “R” brand or similar approved P.V.C. fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting,,clamps etc. complete at all levels including below G.L. as directed and specified.(B) In exposed or in trench.b) 40 mm dia |
| 134 | c)25 mm dia |
| 135 | Supplying fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified ( G.I. & C.P pipes will be measured separately) I) Essco makea) Bib cock short body |
| 136 | c) Long body bib cock with wall flange |
| 137 | Supplying fitting and fixing Chrome plated (C.P.) stop -cock of approved brand and size as mentioned below as directedand specified ( G.I. & C.P. pipes will be measured and paid separately) I) Jaquar (a) Continental /Clarion (i) 15 mm dia male/female (long thread) |
| 138 | ii) 15 mm dia Angular stop cock |
| 139 | Supplying and fitting fixing C.P. pillar cock of 15 mm dia of approved brand as specified and directed. ii) Jaquar make a) Continental /Clarion -pillar cock with aerator |
| 140 | Supplying fitting fixing chromium plated Sink cock of approved brand v) Jaquar brandii) Sink cock with raised J shaped swinging spout. |
| 141 | Providing fitting & fixing stainless steel kitchen sink of parry ware make with CI/MS bracket, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required.A) Parry ware makeiv) Single Bowl(240x180) flat edge- glossy(Cat. No. C8535) |
| 142 | Providing fitting and fixing vitreous china wash basin with CI/MS bracket, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets cutting and making good the walls and floors wherever required.B) Parry ware Make (iv) Qube600x460 (Cat. No. C844D/G) white/coloured |
| 143 | Providing fitting fixing decorative mirror complete as directed and specified.A) Parry ware Make a) 600mmx400mm |
| 144 | Providing fitting and fixing recessed soap tray /soap dish complete as directed B) Parry ware Make(ii) Reses SP & SG dish (Cat. No. C9935) |
| 145 | Providing fitting and fixing CP Towel rail complete as directed and specified b) Agmeco made ii) Cubin 450mm long |
| 146 | Supplying and fitting ,fixing PVC pipes of 6kg/cm2 (Supreme/Prince) or any other ISI approved brand including joining, fitting, and fixing with clamps etc as necessary complete at all levels including below G.L as directed and specifieda) Exposed or in trenchii) 110 mm dia |
| 147 | Providing fitting fixing 50mm dia cowel with cement caulking complete as directed and specified.ii) 110 mm dia PVC cowel of ISI make. |
| 148 | Clearance of service septic tank and removing the night soil and debris etc. manually from the tank chamber to a distance. |
| 149 | Renewing vitreous water closet squatting pan (Indian type W.C. Orissa pattern) with all fittings 2.2.1 Indian type W.C. Orissa pattern of size 580mmx440mmb) coloredii) Hind ware make |
| 150 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/ Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed ( sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table1.50x1.50x1.50 = 3.375 CM |
| 151 | Internal Electrification worksWiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. completea) Short Point up to 3 Mtr length |
| 152 | b)Medium point up to 6.00mtr length |
| 153 | c)Long point up to 10.00mtr length |
| 154 | Wiring to 5pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark withphenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Short point up to 3.00 m length |
| 155 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessedconduit wiring system includingand fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switchboard (I.S.I. mark withphenolic laminated sheet cover earth continuity with 2.5 sq. mm cableto the 3rd pin of the socketas required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)Long point up to10.00mtr length |
| 156 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.With 2x2.5sqmm +earth continuity with 1x1.5sq mm in flat 19 mmISI marked casing n capping system. |
| 157 | With 2x2.5sqmm +earth continuity with 1x2.5sq mm in flat 19 mmISI marked casing n capping system |
| 158 | With 2x2.5sqmm +earth continuity with 1x4 sq mm in flat 19 mmISI marked casing n capping system |
| 159 | Supplying with fitting and fixing sheet steel, phosphaited, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.4way SPN Double door |
| 160 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories as approved by the Department as required (Without lamp) |
| 161 | Supplying with fitting and fixing single pole 10KA 240/ 415V 50HZ MCB of the following capacity complete with necessary connection as specified and directed by the deptt.B. Series 6to 32 A |
| 162 | Premium model1400 mm Sweep. (ORIENT PSPOmake) /Premium model1400 mm Sweep SS-390 Deco. Havellsmake) |
| 163 | Supplying fitting fixing of ceiling fan regulator including connection etc. complete as directed Electronic Type |
| 164 | Installation of Earth station with 40mm dia . And 4.50 metre long G.I. pipe with necessary G.I. reducing socket 40 mm x20mm size locking arrangement with h\" inged cover plate, funnel, G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosure on the top etc. as required complete. |
| 165 | Extra for using salt (5 kg) and Charcoal (64 kg for pipe earth electrode as required. |
| 166 | Supplying and laying 8 S.W.G. Copper wire at 0.50 metre below ground level for conductor earth electrodes including soldering, excavation work and refilling etc. as required complete. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
