|
| 1 | Reinforcedcementconcreteworkinbeams,suspended floors,roofshaving slopeup to 15°landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement,with 1:1.5:3 (1cement: 1.5coarsesand (zone-III)derivedfromnaturalsources: 3gradedstone aggregate 20mm nominalsize derivedfrom natural sources). |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 3 | Shelves (Cast in situ) |
| 4 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 6 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 8 | Granite of any colour and shadeArea of slab over 0.50 sqm |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked : |
| 11 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : |
| 12 | 125x85x5.5 mm (heavy type) |
| 13 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 14 | 200x10 mm |
| 15 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 16 | 125 mm |
| 17 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 18 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 20 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 21 | 6 mm thick Cement fiber board as per IS: 14862 |
| 22 | 12 mm cement plaster of mix : |
| 23 | 1:4 (1 cement: 4 fine sand) |
| 24 | French spirit polishing : |
| 25 | Two or more coats on new works including a coat of wood filler |
| 26 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 27 | Of area 3 sq. metres and below |
| 28 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 30 | W.C. pan with ISI marked white solid plastic seat and lid |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 32 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 33 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 34 | Kitchen sink with drain board510x1040 mm bowl depth 178 mm |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 36 | Semi rigid pipe 32mm dia |
| 37 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 38 | Oval shape 450x350 mm (outer dimensions) |
| 39 | Providing and fixing toilet paper holder : |
| 40 | C.P. brass |
| 41 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 43 | 20 mm nominal dia Pipes |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 45 | 25 mm nominal dia Pipes |
| 46 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 47 | 45 cm length15 mm nominal bore. |
| 48 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 49 | 15 mm nominal bore |
| 50 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 51 | 15mm nominal bore |
| 52 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 53 | Providing hollow cement block walling upto floor level 200 mm thick consisting of using hollow block of size 40x20x20 cm of mix 1:3:6(1Cement :3Coarse sand:6 graded stone aggregate 10 mm nominal and dwn size ) having a crushing strength of 3.50N/mm2 at 28 days as per IS 2185(Part-I)1979 laid in cement Mortar 1:6(1 Cement :6 Coarse sand) complete. |
| 54 | Providing hollow cement block walling upto floor level 100 mm thick consisting of using hollow block of size 40x10x20 cm of mix 1:3:6(1Cement :3Coarse sand:6 graded stone aggregate 10 mm nominal and dwn size ) having a crushing strength of 3.50N/mm2 at 28 days as per IS 2185(Part-I)1979 laid in cement Mortar 1:6(1 Cement :6 Coarse sand)complete. |
| 55 | Providing wood work in framed of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. |
| 56 | First class Padauk wood cat-I |
| 57 | Providing and fixing 35mm thick panelled, glazed or panelled & glazed shutters for doors, windows, clerestory windows including anodised aluminium butt hinges with necessary screws excluding panelling which will be paid for separately all complete as directed by Engineer in charge. |
| 58 | First class Padauk wood Cat-I (a) |
| 59 | Providing and fixing panelling and panelling and glazing in panelled & glazed shutters for doors, windows, clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to measured) .Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. |
| 60 | First class Padauck wood Cat-I (a) |
| 61 | Providing and fixing wall panelling of 12 mm thick Padauk wood tongued & grooved fixed over Padauk wood frame work runner (beam) of size 50 m x 25 mm fixed at 300 mm c/c horizontally and 600 mm c/c vertically by secrete nailingwith brass screws duly fixed to all including provision of designed padauk wood beading on top and bottom termination of wood boarding and finishing with two coat of Melamine Polish over a coat of honey/natural colour wood filler putty etc including preparation and applying sand paper and finishing to a glossy finish: |
| 62 | Providing and fixing CP 2Way bib cock of approved quality |
| 63 | 15mm nominal |
| 64 | Providing and fixing PVC Soil waste and vent pipes |
| 65 | 100mm dia |
| 66 | 75mm dia |
| 67 | Providing and providing PVC Bend of required degree |
| 68 | 110mm dia |
| 69 | 75mm dia |
| 70 | Providinf and fixing PVC plain bend of required degree. |
| 71 | 100mm dia |
| 72 | 75mm dia |
| 73 | Providing and fixing PVC Terminal guard |
| 74 | 110mm dia |
| 75 | Providing and fixing CP Soap dish |
| 76 | Providinf and fixing Bright finishing brass sliding door bolts with necessary screws etc. completed. |
| 77 | 300x16mm |
| 78 | 250x16mm |
