Military Engineer Services-MES has published Repairs To Sunken Floor, Chajja, Balcony, Roof Treatment And Other Connected Works In Zone D At Old Cantt Allahabad. Repairs To Sunken Floor, Chajja, Balcony, Roof Treatment And Other Connected Works In Zone D At Old Cantt Allahabad.. Submission Date for this Tender is 25-09-2021. Shed Construction Tenders in Allahabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of AC corrugated or semi corrugated sheets including AC ridges as in roof covering, complete all as specified and directed.. |
| 2 | Asbestos cement, corrugated or semi-corrugated sheets, 6mm thick in roofs, walls etc., fixed with L or J type or cranked hook bolts, complete all as specified and directed. |
| 3 | Asbestos cement, corrugated or semi-corrugated sheets, 6mm thick in roofs, walls etc., fixed with L or J type or cranked hook bolts, except sheets, complete all as specified and directed. NOTE:- Old AC corrugated or semi corrugated sheet retrieved from Sl. Item No. 1 here-in-before shall be reused in this item. |
| 4 | Asbestos cement two piece adjustable plain wing ridge, 6mm thick,fixed with L or J type or cranked hook bolts, complete all as specified and directed. |
| 5 | Fibre glass reinforced translucent corrugated sheeting, 2mm thick, with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed. |
| 6 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as specified and directed. |
| 7 | Galvanised, corrugated mild steel sheeting, 0.63 mm thick,with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. |
| 8 | Plain, galvanised, mild steel sheeting, 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,complete all as specified and directed. |
| 9 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed. |
| 10 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 12 | Rolled mild steel work as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A, fixed with and including provision of necessary welding or screw, complete all as specified and directed. |
| 13 | Supply only Integral waterproofing compound, BIS approved make, complete all as specified and directed. NOTE:- The integral water proofing compound shall be incorporated all as per manufacturers instructions |
| 14 | Plain, galvanised, 0.63 mm thick, mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut), fixed with screw including cutting oval shaped hole in sheet as provided in covering of expansion joint,complete all as specified and directed. |
| 15 | Preparation of new steel and iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on,complete all as specified and directed. |
| 16 | Dismantling of bricks (laid flat or on edge) (each layer) or brick tiles in floors, channels, kerbs, aprons, etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 17 | Demolition of mud / lime concrete from roof surface, including plastering, leeping, vegetation shrubs etc., not exceeding 15 cm thickness (below or above ground level) and removing rubbish from site,complete all as specified and directed. |
| 18 | Providing water proofing treatment over cleaned roof surface with APP modified bituminous membrane of weight not less than 3 kg per sq.m, including testing on completion, comprising the following:- (a) 10 mm thick rendering or screed bed or bedding layer in cement sand mortar 1:4 mixed with water proofing compound @ 3% bt weight of cement, finishing the surface even and smooth without using extra cement. (b) One coat of Bitumen primer confirming to IS-3384-1965 @ 0.3 Kg per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sqm confirming to IS-702-1998 for water proofing membrane. (d) Providing APP modified polymeric water proofing membrane 3mm thick, having weight not less than 3 kg per sq.m with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length. (e) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 over water proofing membrane. (f) Spread coarse sand over entire bitumen surafce. |
| 19 | Brick tiles, 40 mm thick, laid over and including provision of15 mm thick screed bed in CM 1:6, joints shall be pointed with CM 1:3, complete all as specified and directed. |
| 20 | Brick tiles, 40 mm thick, laid over and including provision of15 mm thick screed bed in CM 1:6, joints shall be pointed with CM 1:3, except tiles, complete all as specified and directed. |
| 21 | Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 22 | Provision of the following :- (a) Chipping of existing loose and damaged / cracked RCC / plain concrete / plaster in any height as it may exists, any thickness (varies from 15mm to 25mm), at specified locations, upto and beyond steel reinforcement bars, with chisel and hammer, brushing with wire brushes, removing all dust, dirt, scales from reinforcement bars and washing concrete surface with water, complete all as specified and directed. (b) Providing and supplying rust inhibition coat system (in two coats) @ 1.50 kg /10 sq.mor as per manufacturers instructions to exposed reinforcement bars after cleaning and removing scales and rust, complete all as per manufacturers instructions. (c) Providing and applying a bond coat (epoxy based bonding material) @ 2.00 kg / 10sq.m or as per manufacturer instruction to all exposed concrete surfaces, complete all as specified and directed.(d) Provision of rendering 15mm thick in CM 1:3 on concrete and applying latex polymer modified cement mortar in specified composition (i.e., cement 400 parts by weight, quartz sand 1600 parts by weight, polymer 60 parts by weight, water 120 parts by weight) to RCC surfaces duly treated as per steps mentioned, complete all as per manufactures instructions NOTE:- (i) Thickness of plaster varies from 15 to 20mm (ii) The quoted rate shall deemed to include the provison of nescessary scaffolding and form work. (iii) RCC surface repaired by manucturer / Company expert of FOSROC / RUSTONIL / TAPCRETE / TECHNO-PRECISION ENGINEERS |
| 23 | Cutting holes into or through brick walls built in cement mortar, superficial area not exceeding 150 sq.cm, complete all as specified and directed. |
| 24 | Mild strel miscellaneous work as in framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 25 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 26 | Brickwork with flyash bricks, straight or curved on plan in any radius, in half brick thick, built in CM 1:4, complete all as specified and directed. |
| 27 | Taking down cement plaster on brick or stone walls or wall tiles etc., including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises, complete all as specified and directed. |
| 28 | Rendering 15mm thick, on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound, finishing the surface even and smooth without using extra cement, complete all as specified and directed. NOTE:- The quantity of water proofing compound shall bemeasured and paid separately under respective items of this Schedule. |
| 29 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of 1mm thick wall putty, complete all as specifed and directed. |
| 30 | Rendering 10mm thick, on fair faces of brick work or concrete surfaces in cement sand mortar 1:6,finished surface even and smooth without using extra cement, complete all as specified & directed. |
| 31 | Preparing new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed. |
| 32 | Preparation of new plastered surfaces and clearcolle for primer and applying two coats of acrylic emulsion paint, white or tinted as directed, complete all as specifed and directed. |
| 33 | Rendering 10mm thick, on fair faces of brick work or concrete surfaces in cement sand mortar 1:4,finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 34 | Preparing new plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and directed. |
| 35 | Preparing old plastered surfaces of ceiling and applying twocoats of white wash, complete all as specified and directed. |
| 36 | Complete removal of exisitng surface treatment / finish on walls by scrapping with wire brushes and cleaning with water and finally brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applyingtwo coats of acrylic emulsion paint of approved colour and shade, with and including washing of floor, cleaning of glass, joinery, electrical fittings etc., complete all as specified and directed. |
| 37 | Complete removal of exisitng surface treatment / finish on wallsby scrapping with wire brushes and clean with water and applying two coats of cement base paint on wall surfaces, complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for i.e, as in sunken portion,complete all as specified and directed. |
| 39 | Plain Cement concrete type B-0, 1:2:4 (12.5mm gradedstone aggregate), 40mm thick, as in treatment of sunken floor, finished smooth without using extra cement and using water proofing compound, complete all as specified and directed. NOTE:- Water proofing compound shall bemeasured and paid separately under respective items of this Schedule. |
| 40 | Rendering 15mm thick, on fair faces of brick work or concrete surfaces of sunken floor, in cement mortar 1:3,finished surface even and smooth without using extra cement and using water proofing compound, complete all as specified and directed. NOTE:- Water proofing compound shall bemeasured and paid separately under respective items of this Schedule. |
| 41 | Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat, complete all as specified and directed. |
| 42 | Plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation, filling, sub base or for filling up sunken floor, complete all as specified and directed. |
| 43 | Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm, 50 mm bore, complete all as specified and directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises,complete all as specified and directed. |
| 45 | Joint free Non - skid Ceramic tiles 7 to 8 mm thick, 300mm x 300mm size, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 46 | Joint free Non - skid Ceramic white tiles 7 to 8 mm thick, 400mm x 400mm size, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 47 | Glazed ceramic coloured tiles, premium quality, as in vertical surfaces of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7 mm / 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laidover and including provison of backing coat of 10 mm thick in cement mortar 1:4, complete all as specified and directed.. |
| 48 | Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 49 | Taking down chowkhat or frame with shutter (without taking off shutters from the frame), area exceeding 1.5 sq.m but not exceeding 4.0 sq.m each and removing from site, complete all as specified and directed.. |
| 50 | Taking down shutter of any description, exceeding 1 sq.m not exceeding 2 sq.m each and removing from site, complete all as specified and directed.. |
| 51 | Pressed steel door frames of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. NOTE:- The quoted rate shall deemed to be include for one shop coat of primer. |
| 52 | Pressed steel door frames of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. NOTE:- The quoted rate shall deemed to be include for one shop coat of primer. |
| 53 | Flush shutters, 35mm thick, factory made, kiln seasoned and ASCU treated, solid core construction, with block board core and plywood face panels, commercial type on both sides,complete all as specified and directed. |
| 54 | Flush shutters, 25mm thick, factory made, kiln seasoned and ASCU treated, solid core construction, with block board core and plywood face panels, commercial type on both sides,complete all as specified and directed. |
| 55 | Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass / gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a), complete all as specified and directed. |
| 56 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. MAKE:- M/s SINTEX or RAJSHREE plastic or M/s Kumar Arch Tech Ltd |
| 57 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. MAKE:- M/s SINTEX or RAJSHREE plastic or M/s Kumar Arch Tech Ltd |
| 58 | Aluminium anodised alloy barrel tower bolt of extruded section, 150mm long, fixed with screws, complete all as specified and directed. |
| 59 | Butt hinges, 100 mm long, medium weight, cold rolled mild steel, type B-21 with galvanised mild steel hinge pin, bright polished, complete all as specified and directed.. |
| 60 | Aluminium handles, 125mm size,cast type, anodised, complete all as specifeid and directed. |
| 61 | Ordinary rat tail rod, 300mm long, pattern springs of mild steel including roller and roller plate, fixed in repair, complete all as specifeid and directed. |
| 62 | Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 63 | Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 64 | Aluminium anodised alloy barrel tower bolt of extruded section, 100mm long, fixed with screws, complete all as specified & directed. |
| 65 | Butt hinges, 75 mm long, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 66 | Steel windows, factory made, with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint includingpreparation of new steel and iron surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over one shop coat of zinc chromate primer, fixed in repair, complete all as specified and directed. NOTE:- The quoted rate shall deemed to exclusive of shop coated primer for steel windows. |
| 67 | Steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete without glazing bars, dovetailed or welded joint includingpreparation of new steel and iron surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer, fixed in repair, complete all as specified and directed. NOTE:- The quoted rate shall deemed to exclusive of shop coated primer for steel windows. |
| 68 | Steel windows or ventilators, fixed type, with glazing bars, fixed in repair,complete all as specified and directed. |
| 69 | Running welding in repairs, for thickness of metal to be welded exceeding 6mm but not exceeding 9mm, complete all as specified and directed. NOTE:- The quoted rate shall deemed to include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exceeding 3mm thick. |
| 70 | Running welding in repairs, for thickness of metal to be welded exceeding 9mm but not exceeding 20mm, complete all as specified and directed. NOTE:- The quoted rate shall deemed to include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exceeding 3mm thick. |
| 71 | Hacking out old broken glass (any thickness, size, quality or description) from metalframe including punching or drilling out old glazing pins / spring clips, glazed with putty or fixed with beads complete as specified and directed. |
| 72 | Sheet glass, 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq.m in each pane,complete all as specified and directed. |
| 73 | Sheet glass, 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 sq.m in each pane,complete all as specified and directed. |
| 74 | Galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd. |
| 75 | Galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repair, complete all as specifed and directed. |
| 76 | Preparation of new wooden and wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 77 | Preparation of new steel and iron surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 78 | Suspended false ceiling using Chicago E-boad of Make : Everest / Armstrong or techno-commercially equivalent make as approved, design "Lake & Hill" of size of grid 605mm x 605mm x 4 mm thick white pre-laminated self embosed, texture designed board, water resistant, fire resistant & termite resistant for Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24 mm wide T section powder coated, the frame work shall comprises of main runner made with 0.33 mm thick GS sheet and of size 24x32x300mm spaced at 1200 mm maximum centre to centre fixed to structral soffits with hangers of 1.8 mm dia GI wire to be fixed with rawl plugs, adjusted with screws, flush fittings of 1200 mm long cross Tee with double stiching to be interlocked between main runners at 600 mm c/c from cross Tee more than 600 mm to be suported independently and double to be formed by fittings 600 mm long cross tee centrally between the 1200 mm cross tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour including making hole in board for provison of light fittings, fixed in repair, complete all as per manufacturer Instructions, complete all as specified and directed. |
| 79 | MS tubing of 25mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings decorative holder and CP brass brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair, complete all as specified and directed. |
| 80 | Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified and directed. |
| 81 | Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120mm wide with and 600 mm long chromium plated bracket guard and railing fixed with steel screws on wall, fixed in repair, complete all as specified and directed. |
| 82 | Bathroom cabinet mirror of size 450mm x 350mm, 4 mm thick mirrorfitted with superior quality distortion free hard thermosetting plastic with chromium plated brass screws and cup washers, fixed in repair, complete all as specified and directed. |
| 83 | Angle valve 2 way, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, 15mm bore, screwed for iron pipe or for unions, fixed in repair, complete all as specified and directed. |
| 84 | Bib taps, cast copper alloy, chromium plated, with capstan head, fancy type, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore, fixed in repair, complete all as specified and directed. |
| 85 | Brass CP shower rose 65 to 90 mm size with swivel joints, fixed in repair, complete all as specified and directed. |
| 86 | Kitchen sink without drainage board made of stainless steel 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of cast iron and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed. |
| 87 | Stainless steel kitchen plate rack of size 24" x 30" x 10", fixed in repair, complete all as specified and directed. MAKE:- Model No KPR-311 of Blue Star / P-330 of Prayag or techno-commercially equivalent model in any other makes as approved by GE. |
| 88 | Bevelled edge mirror of 600mm x 450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repair, complete all as specified and directed. |
| 89 | PVC low level cistern "white" with inlet, 10 litre capacity, float valve including bracket with 32mm dia PVC pipe 600mm long, fixed in repair, complete all as specified and directed. |
| 90 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm, fixed in repair, complete all as specified and directed.. |
| 91 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including provision of cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, 100mm bore "P" or "S" of pipe, fixed in repair, complete all as specified and directed. |
| 92 | Vitreous china water closet pedestal pattern, white (excluding flushing cistern & flush pipe), fixing seat cover including connection to drain (or outgoing flushing pipe, anti syphonage pipe) with aluminium hinging device, fixed in repair, complete all as specified and directed. |
| 93 | Supply only Plastic seat and cover white colour for closed pattern with flat bottom and cover with mild steel chromium plated hinging device, complete all as specified and directed. |
| 94 | Vitreous china wash hand basin white flat back of size 550mm x 400mm excluding chain, plug and porcelain stopper but including brackets of mild steel angle 35mm x 35mm x 5mm, PVC waste pipe (rigid quality) 32 mm bore 600mm long, brass waste coupling 32 mm dia and PVC connection 15mm size with PTMT nuts on both ends of length 450mm, fixed in repair, complete all as specified and directed. |
| 95 | Supply only Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore, fancy type,complete all as specified and directed. |
| 96 | Supply only 32 mm dia waste pipe of polyethylene, flexible, for wash hand basin or urinals, complete all as specified and directed. |
| 97 | Taking up or down steel tubing 15mm bore and connections including removing from the site, complete all as specified and directed. |
| 98 | Taking up or down steel tubing 20mm bore and connections including removing from the site, complete all as specified and directed. |
| 99 | Steel tubing, medium grade, ISI marked, galvanised including short lengths, fixed to walls and ceilings or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15 mm bore of pipe, complete all as specified and directed. |
| 100 | Steel tubing, medium grade, ISI marked, galvanised including short lengths, fixed to walls and ceilings or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20 mm bore of pipe, complete all as specified and directed. |
| 101 | Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity (ISI marked), double layered, hoisted and fixed in position and connected to pipes, with and including provision of ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of dia 20mm (minimum weight 210 gram), complete all as specified and directed. |
| 102 | Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore, fixed in repair, complete all as specified and directed. |
| 103 | UPVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, fixed in repair, complete all as specified and directed.. |
| 104 | UPVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in trenches, fixed in repair, complete all as specified and directed.. |
| 105 | UPVC (SWR) bends/ shoe of any radius and 75mm bore fixed to pipes in wall, making good with CM 1:4 or PCC 1:2:4 if required, fixed in repair, complete all as specified and directed.. |
| 106 | UPVC (SWR) bends ISI marked with ovalaccess door of any radius of 75 mm bore pipes jointed with rubber solvent, fixed in repair, complete all as specified and directed. |
| 107 | UPVC (SWR) 75 mm dia branch piece, single (single Y) equal or unequal, oval access door, jointed with rubber solvent, fixed in repair, complete all as specified and directed. |
| 108 | UPVC (SWR) 75 mm dia junction double (double T), equal or unequal, with access door, jointed with rubber solvent, fixed in repair, complete all as specified and directed. |
| 109 | UPVC (SWR) floor trap of 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 110 | CP grating 100 mm dia, fixed with coloured cement joint to match the existing surface of tile, fixed in repair, complete all as specified and directed. |
| 111 | UPVC (SWR) vent cowl, 110mm bore, fixed with solvent, fixed in repair, complete all as specified and directed. |
| 112 | UPVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber gasket cup washing joints, fixed to walls or laid in floors or trenches, fixed in repair, complete all as specified and directed. |
| 113 | UPVC (SWR) bends of any radius and 110mm bore fixed to pipes in wall, fixed to PVC pipe joint with rubber solvent,fixed in repair, complete all as specified and directed. |
| 114 | UPVC (SWR) 110 mm dia junction double (double T), equal or unequal, with access door, jointed with rubber solvent, fixed in repair,complete all as specified and directed. |
| 115 | Mild steel miscellaneous work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
