|
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 2 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using crusher broken aggregate. M 10 grade Nominal mix (withgraded stone aggregate 40mm nomimal size.) |
| 3 | RR Stone masonry for Foundation and plinth in cement sand mortar above 30cm thick wall in : Cement mortar 1:6 (1Cement: 6 sand) |
| 4 | Centering & shuttering with plywood or steel sheets including strutting , propping bracing both ways with wooden members and removal of formworks forupto floor three level for: Columns,pillars posts and struts etc. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level : M25 Grade nominal mix |
| 6 | Providing & fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire ) all complete upto floor three level. Thermo Mechanically Treated Bars (IS : 1786 ) |
| 7 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished 20mm thick. |
| 8 | Providing & fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification. |
| 9 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete : In ordinary cement |
| 10 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 11 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles (confirming to IS : 13753 & IS 13622) of size 300 mm x 450 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 12 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 13 | Cement concrete flooring grade 1:2:4 (1 cement : 2 coarse sand : 4 finished of all respect including) rounding off edges etc. but excluding the cost of nosing of steps etc. complete.50mm thick with 20mm thick nominal size aggregate. Including finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete. |
| 14 | Painting with enamel paint of approved brand and manufacture to given an even shade. Two or more coats on new work. |
| 15 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 16 | Applying Birla/JK white cement based putty over cement plastered surface for making even surface |
| 17 | Providing & fixing external grade board solid core (tripple core) single leaf boiling water & termite resistant flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fitting complete as per annexure \"A\" 30 mm thick. Decorative teak veener both side |
| 18 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 19 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 20 | P & F WVC wash basin (1st quality IS : 2556 mark) of approved make with CI brackets duly painted 1 No 15mm CP Pillar cock (IS : 8934 mark) & 32mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting & making good the wall,Size 550 mm x 400 mm dia for counter top |
| 21 | P & F Beveled edge Mirror of special glass of approved make (Atul/equivalent)complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers.size 600mmx450mmx4mm thick |
| 22 | P & F grating of approved quality/ make stainless seel sheet size 125mm dia |
| 23 | 15 mm nominal bore \"B\" Class |
| 24 | 25 mm nominal bore \"B\" Class |
| 25 | P & F bib cock (IS : 8931 mark) superior quality of approved make CP brass,15 mm nominal bore |
| 26 | P & F Ball cock (IS : 1703 mark) with Rod & PVC ball complete brass wt. 400gm ,15 mm nominal bore |
| 27 | Gun- metal 25mm nominal bore |
| 28 | P & F PVC storage tank ( IS :12701 mark includibf the BIS license no.)of approved mark with cover 25 dia 1M long GI over flow pipe & 25cm long wash out pipe with plug & socket including making connection etc. complete of approved design 500 liters capacity. |
| 29 | 75mm dia |
| 30 | 110mm dia |
| 31 | coupler (socket) |
| 32 | Plain Tee |
| 33 | Bend 45 |
| 34 | coupler (socket) |
| 35 | Door Tee |
| 36 | Plain Tee |
| 37 | Bend 45 |
| 38 | Providing and fixing of precast concrete interlocking block of M 30 grade manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001 with rubber mould technology including painting with lacker polising. The CC interlocking paving blocks be laid on average 50 mm. thick bed of coarse sand and the joint on is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes General specification of blocks:1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color : Grey cement natural colour. 4) Variation in dimension : Less than 1.6 mm. 5) Variation in thickness : Less than 3.2 mm. 6) Abrasion : As per BS : 6717:2001 80mm thick interlocking blocks |
